OBIEE 11g Filter condition

Hi ,
In my report i would like display the data for year 2011 and 2010 ,
here i have added the filter FILTER(FILTER("FiOS CPM"."FiOS_CPM - measure" USING ("Type"."Type" = 'Network Type')) USING ("Scenario"."Scenario" = 'Seq Diffs YR10')) getting the data.
when am added the two conditions am getting error message
FILTER(FILTER(FILTER("FiOS CPM"."FiOS_CPM - measure" USING ("Type"."Type" = 'Network Type')) USING ("Scenario"."Scenario" = 'Seq Diffs YR10')) USING ("Scenario"."Scenario" = 'Seq Diffs'))
please help me on

Hi
Can you please post the error message in order to help.
Simple question why are you using the FILTER function instead of filtering on the column directly by adding filters?
Regards
Adil

Similar Messages

WHERE condition in OBIEE 11g

HI gurus,
How can I use a WHERE condition in obiee 11g in the Column formula or in the BMM layer in the repository .
Thanks in advance
Reg,
Niv

Hi,
In the Column formula, the functions like Case When clause (Category: Expressions) can always be used in the building the expression.
For the above, there is always two options
1. Derived from Physical Mappings - this will list only the physical tables that are pulled into the LTS of the logical table
2. Derived from existing columns using an expression - this will list all the Logical tables in the RPD
If you want to apply the filter i.e where clause on the entire table, then go to Content Tab of the LTS
Enter your WHERE clause filters in the section - Use this "WHERE clause".....
The above modifications will apply where clause on all the columns
Please mark if it is helpful
Srikanth

About the filter function in OBIEE 11g

Hi, all.
when i use the filter function in OBIEE 11g, it turn out a wrong result.
The operation steps and detail are described as follow:
1. In the Column Formula pane, I typed the Formula of the column 'count of customer' as:
FILTER(count(distinct("customer info dimesion"."customerID")) USING ("TradeType Dimesion"."TradeType" = '001'))
2. But the phisical SQL about this column in the NQquery file is that: "count(distinct(T11520.CUSTOMERID)) as c5, "
which means that, the filter wasn't applied, right?
If so, what shall I do in this situation, in other words , how can i make a Condition COUNT？
Any Suggestion is appreciated!
Thank you in advance~~O(∩_∩)O~

Hi katherine,
FILTER(count(distinct("customer info dimesion"."customerID")) USING ("TradeType Dimesion"."TradeType" = '001'))I think your formula there is mistake like many braces...instead type this in your f(x)
=>Filter(count(distinct customer_id) USING trade type='001')
This filter function is same like a case statement,if you filter still gives error write a case statement
CASE WHEN TradeType Dimesion.TradeType='001' THEN count(distinct customer info dimesion.customerID) ELSE 0 END
Will it be helpful?,follow this etiquette http://forums.oracle.com/forums/ann.jspa?annID=939
By,
KK

Filter Grouping not working for OBIEE 11g

Hello!
I need some help on the below:
I have built a simple report in OBIEE 11g with FILTER grouping on two dimensions as below:
          Operative Hierachy is equal to Europe, IMEA, APAC, China Focus Country, Americas, US and Canada
     and      Accounts is equal to Net Sales (i), Gross Margin (i), GM% (i)
or
          Accounts is equal to Gross Margin, Net Sales, Gross Margin %
     and      Operative Hierachy is equal to / is in Organizations Total
The report was working as expected; but now suddenly it's showing no results with the error "+The specified criteria didn't result in any data. This is often caused by applying filters and/or selections that are too restrictive or that contain incorrect values.+" - even though data is present ! - I have tested this by splitting it into two reports (with only the AND conditions)- which is then woking as expected.
Points to note:
--There had been no change on the Report, when it stopped showing results.
--I have tested this filter grouping with other dimensions- & they are working fine.
--The OBIEE reports are fetching data from ESSBASE cube.
--Only thing which I can remember when it stopped working is that, there had been a data load on the ESSBASE cube. But other reports using these dimensions are working.
Has anyone faced the same issue before. Please help.
Edited by: Anu on Jan 22, 2013 12:31 AM

Hi User, Vijay,
Yes I have checked the generated SQL queries and the MDX queries as well. Both queries are generated as expected, but returns no result.
But now I have found out how these two different dimensions are different from my other dimensions. Only these two dimensions have a SORT order logical column defined in the BMM layer- which I think is causing the problem, BI Server not able decide which column to sort. So, the sql gives result when I cimment out one of the SORTKEY
SELECT
0 s_0,
"PSS Essbase"."Accounts"."Accounts" s_1,
"PSS Essbase"."Operative Hierarchy"."Operative Hierachy" s_2,
-- SORTKEY("PSS Essbase"."Accounts"."Accounts") s_3,
SORTKEY("PSS Essbase"."Operative Hierarchy"."Operative Hierachy") s_4,
"PSS Essbase"."Facts"."Measure" s_5
FROM "PSS Essbase"
WHERE
((("Operative Hierarchy"."Operative Hierachy" = 'Europe') AND ("Accounts"."Accounts" = 'Gross Margin'))
OR (("Operative Hierarchy"."Operative Hierachy" = 'Russia Focus Country') AND ("Accounts"."Accounts" = 'Sales ASP')))
ORDER BY 1, 5 ASC NULLS LAST, 4 ASC NULLS LAST
FETCH FIRST 65001 ROWS ONLY
Any views on what happens when we use two dimensions in the same report which have sort columns defined in the repository...

OBIEE 11g: Non conformed dimension filter

Hi,
I have two fact tables and some confromed and non conformed dimensions between the fact tabels.
The hiearchies being built and proper levels were set for the fact tables. The measures of the fact were set to the total level of the non confromed dimension tables.
The fact also hold some non aggregated columns (baseline columns), all the base line columns where moved to a logical dim table.
The report involves both the fact tables, conformed and non conformed dimension columns.
When we built the report with all these columns the report is showing fine. But when we add the filter with the non conformed dimension the report is throwing some error.
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14023] None of the fact sources for D01 Date.Date are compatible with the detail filter [D05 Non Confrm Dimension.Code = 'AFS']. (HY000)
The above functionality was working fine with OBIEE 10g and have implemented it many times before.
There is one patch available for this issue but it is available only for windows 32 bit enironment.
Patch details
Patch 14210864: OBIEE 11G: CONFORMING DIMENSION SETTINGS FROM 10G NOT WORKING IN 11G
Can anyone give some suggestion or workaround? I can't do any change in Datamodel.
Thanks,
Vino

Hi Vinod,
In OBIEE 10g, we are running into similar error when we add filter from non conformed dimensions in a report, so can you please share patch download details like where to download or if we have to raise a SR for the Patch 14210864.
Thanks in Advance!!

Customize Filter View in OBIEE 11g

Hi,
Is there any way to customize the filter view? My requirement is not to show formulas that are used in Analysis in the “Filter view”. All analysis that we create should go with Filter Views at the bottom and Users should not see the formulas.
Example:
Column Formula:
FILTER (sales.sales USING products.product =’Electronics’)
If I filter the above column, it shows something like this:
FILTER (sales.sales USING products.product =’Electronics’) is Prompted.
What is need to show in the filters is the Title of the column i.e. Electronics Sales.
Thanks in advance.

Check this
How To Implement a Narrative View Similar To A Filter View In OBIEE 11G?
Mark if helps.
Thanks,

Issues with less than and grater than condition in prompts in OBIEE 11g,

Hi all,
i am facing the prombles with less than grater than conditions in OBIEE 11g.
i created two date prompts with presentation variables datefrom and dateto
and i used these prompts in fileters like this using grater than and less than symbol.
filters are as below:
lastupdated date is grater than or equal to @{datefrom}{1/1/1950}
lastupdated date is less than or equal to @{dateto){1/1/1950}
and created two prompts
creation datefrom >=
creation dateto<=
when i passing the dates 05/12/2004 and 05/12/2005 in prompts after clicking the apply button in OBIEE 11g it feches all the records but i need records between these dates. and one more thing is after clicking apply button the two date fields getting the same date..
am i do any thing wrong in the above ???
please let me know friends..
waiting for ur replyyyyyy..
Thanks
Edited by: BI_user on Oct 12, 2011 2:10 AM

Hi,
Create date prompts with operator as = not >= (or) <= as you need to save that value in presentation variable and you are filtering report using those variable filters.
Regards,
Srikanth

OBIEE 11g and Essbase and Dimension Filter / Selection Steps

We are doing a prototype using OBI 11g with Essbase 11.1.2 as a datasource. Our prototype consist of several reports, graphs and dashbaords. The Essbase cube is an ASO cube with 12 dimensions. Most of our dimensions are ragged/unbalanced so we have set up the dimension type to be "Value" in the RPD. There is one dimension - Product and it is a ragged dimension. We are trying to create a simple report that has level zero products as rows. This is something pretty easy to do in Essbase Financial Reporting but it does not look like there is an easy way to filter only on the Level 0 members of a particular dimension. I have tried with selection steps as well as changing the dimension back to unbalanced without much luck.
Has anyone out there done something similar before? Thx.

Hi user,
Check this out OBIEE 11g - Essbase connection Failed
And 1 more thing admin tool works only for 32-bit ...but not in 64 bit.So ensure you install 32-bit for admin tool.
UPDATED POST
Jacob->its same for stand alone application also,it works only on 32-bit
hope helps you.
Cheers,
KK
Edited by: Kranthi.K on Mar 7, 2011 9:00 AM

Filter two different columns in a Dashboard, OBIEE 11g

Hi everyone,
I have read many times this forum, but I this is my first post. I have a problem with OBIEE 11g and I hope you guys could help me.
In the dashboard I have created, there is an analysis table which has the following columns:
(1) Month - (2) Doctor's Name - (3) Num. of Appointments Month 1 - (4) Num. Appointments Month 2
The point is that I want the users to choose in their dashboard a month to filer column (3) and a month to filter column (4), so they can have a comparative view of the number of appointments for each month. I have tried to do this with prompts, but what happened is that the prompt filtered ALL the columns, not just one of them.
So, is there any way of filtering just one column? I mean, when in the dashboard view, not in the analysis creation view.
Thank you in advanced! :)
Javier
Edited by: user13724353 on 07-jun-2011 7:30

Hang on a minute... I think this is possible.
Set up two dashboard prompts to populate 2 presentation variables for your first and second months.
Once you have a presentation variable you can fix the value of column 3 and 4 using the "Filter using" syntax (check the functions list when you edit the column formula). By using Filter using you should be able to pass in the value of your presentation variable.
Paul
http://total-bi.com

Can I set a conditional format as default in OBIEE 11g?

Hi,
I would like to set all positive number be (green) and negative number be (red) for all tables in Analytics Web (OBIEE 11g). Apart from create conditional format for every tables, is there any way to set once only and apply for all reports?

Hi User,
You can set system wide default by clicking on the button in conditional format tab.
*Make sure user has "Save System-Wide Column Formats" privilege to enable the option.
Regards,
Dpka

Filter based on another analysis need to run as a seperate query obiee 11g

Hi,
I have a main report which has a filter condition that depends on the another request(Created through Filter based on another analysis).The Filter based on another analysis report query comes as a embedded query along with the main query (making a subquery).As it has a subquery it is taking more time to fetch data.
Is there any possiblity of running the Filter based on another analysis report as a seperate query.
Please suggest.
Thanks,
Soukath

Hi,
Make sure one thing,u have eanble check box and submit sql button in the bottom of Advanced tab then save it and try again it will work.
refer:
http://tipsonobiee.blogspot.com/2009/06/step-by-step-to-bypass-all-caches.html
Thanks
Deva
Edited by: Devarasu on Dec 19, 2011 11:59 AM

Coloring value with condition in Analysis OBIEE 11g

Dear Gurus,
I have pivot analysis, which show date and sales.
I want to highlight the value of the date if it holiday.
I want to coloring red the holiday date.
How to do that?
Thank you before
Regards
JOE

Hi,
Here I have one question,
How you know wether which day is holiday in your time dim? do you have any condition on that?
If you know that just go-->time date column properties-->click --> condtinoal tab--> apply filter condition and apply the color as you like.
Hope this help's
Thanks
satya

How to build a Analysis report in OBIEE 11g

Hi All,
I have a query regarding 'How to' to build an analysis report in OBIEE 11g.
The data model is a financial data model, where information such as Actual, Plan, Forecast, What - if etc for current AND prior year need to be displayed in a dashboard.
I created two analysis reports one for current year Rep1 and second for prior year Rep2 each with filter criteria as current year and prior year respectively based on years column. and then in the dashboard I created prompt based on scenario column (radio button) for Actual, plan, Forecast, and wht if.
I am able to show the current vs prior year data in the same dashboard for Actual or Plan or forecast or what if (depending on data availability in the database).
I want to achieve the same information in a single analysis report instead of two separate analysis reports. I do not want to create separate physical report for current and prior year data.
I need one analysis report which I can use in dashboard and depending on selection for scenario (actual , plan, forecast or wht if) I want to show the current AND prior year data the way I achieved in with two seperate reports embedded in their respective sections as explained above.
Does any one have idea how to achive this by building single analysis report?
If you need any more clarificaiton or have any queries, please let me know.
Thanks and Regards
Santosh

As per I understand your requirement,
In your Dashboard create a Presentation variable which receives the value of year you select.
Now in your analysis, select the year column along with all the measures you want (Actual, plan, Forecast, and what-if, etc).
Create a filter on Year column and convert it into SQL. Put the condition as:
"Year" BETWEEN @{Presentaion_Variable} - 1 AND @{Presentation_Variable}
You will get the result for selected year and the previous year.
Hope it helps..
Regards,
A.K.

OBIEE-11g Double columns question

Hi guys, on my pc i've installed business intelligence suite 11.1.3 and now I need support about double columns feature. In the business model I've this hierarchy
Region -> Province -> Municipality
where the keys for each level are represented by the name of the element, the problem is that this keys are used to map geometric shapes to enable the map views features and the Municipality values are ambiguous in their domain (could exist two municipality with the same name but different province) in the official documentation is wrote that to unique identify a shape should be used a double columns field but when I 'apply the double field feature to the hierarchy levels the drill feature doesn't work properly and I get a strange filter error (seems that the system filter the value by id on the wrong field). Somebody could help me to understand if I can define a hierarchy where the keys have a descriptor id associated ?
Thanks a lot Regards

I 've also come up with the same issue. I am using OBIEE 11G (11.1.1.5.0) and Oracle Mapviewer Ver11_1_1_4_B110225.
On the RPD, My hierarchy is defined as: District -> Quarter -> Neighbourhood.
For each hierarchy level I am using:
District Logical Level keys:
District Id: Primary Key
District Name: Use for Display
Quarter Logical Level Keys:
Quarter Id: Primary Key
Quarter Name: Use for Display
Neighbourhood Logical Level Keys:
Neighbourhood Id: Primary Key
Neighbourhood Name: Use for Display
I need to associate each Mapviewer theme's ID (District ID, Quarter ID, Neighbourhood ID) with a relevant BI column, because the theme names are not distinct.
I have set the double column (Descriptor Id) feature: (District ID, Quarter ID, Neighbourhood ID) on each BI name column (BI Distict Name, BI Quarter Name, BI
Neighbourhood Name) of the business model and associated the layer key (ID) of each Mapviewer theme with the corresponding BI name column.
On the map view, drilling down from District to Quarter works properly, but I get the following action error while drilling down from quarter to neighbourhood:
An error occurred while trying to generate drill down query.
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError:
46036] Internal Assertion: Condition rowValues.size() == numColumns, file server\Query\Src\SQNavigatorAccess.cpp, line 495. (HY000)
SQL Issued: {CALL NQSGenerateDrillDownQuery('SELECT District Name saw_0, Quarter Name saw_1, DESCRIPTOR_IDOF(District Name) saw_2, DESCRIPTOR_IDOF(Quarter Name)
saw_3 FROM "Subject Area" WHERE DESCRIPTOR_IDOF(District) = 5','1','''5'',''31'',31','-1 -1 -1 -1 -1','0,2,3')}
However, if I add a table view on my analysis and click on the table view's quarter link, drilling down works ok both for the table and for the map view.
Moreover, I tried removing the double column (descriptor Id) feature from the business model while maintaining the hierarchy as described above.
I then associated the layer key (ID) of each Mapviewer theme with the corresponding BI ID column instead of the BI name column.
On the map view while drilling down from District to Quarter, a filter to a specific District is applied, but the associated Quarters theme is not displayed.
Finally, if I enable the "Use for Display" checkbox for each hierarchy level's primary key on the RPD, and maintain the association between the layer key (ID) of
each Mapviewer theme with the corresponding BI ID column, drilling down works correctly but only on the ID.
I need drilling down to work while clicking on the each name BI column of the hierarchy while defining the association on the layer key ID of each mapviewer
theme. Is this possible? Any ideas?

Can we apply saved filters to union reports in obiee 11g?

Hi All
Can we apply saved filters to union reports in obiee 11g?
I am able to apply saved filters for normal reports but not for union reports.
The catalog pane is blank, when i click on result columns or each criteria.
The only option i see is to manually create the filters for each criteria, dont i have any choice to use a saved filter for union report?
Is this a bug or something i am unaware of , Please guide me.
Regards
Pranati

I get the same issue. I thought that it's a problem in a security - the catalog pane is clear in a union report. But saved filters work in 11g. I migrated catalog from 10g to 11g and I see saved filters in the conditions. But you may add saved filters directly into xml. Go on Tab Advanced and edit Analysis XML. You have to add code like this
<sawx:expr xsi:type="sawx:savedFilter" path="/shared/FOLDER/_filters/FOLDER/FILTER_NAME" name="FILTER_NAME"/> in a right place.

OBIEE 11g Filter condition

Similar Messages

Maybe you are looking for