Filter two different columns in a Dashboard, OBIEE 11g

Hi everyone,
I have read many times this forum, but I this is my first post. I have a problem with OBIEE 11g and I hope you guys could help me.
In the dashboard I have created, there is an analysis table which has the following columns:
(1) Month - (2) Doctor's Name - (3) Num. of Appointments Month 1 - (4) Num. Appointments Month 2
The point is that I want the users to choose in their dashboard a month to filer column (3) and a month to filter column (4), so they can have a comparative view of the number of appointments for each month. I have tried to do this with prompts, but what happened is that the prompt filtered ALL the columns, not just one of them.
So, is there any way of filtering just one column? I mean, when in the dashboard view, not in the analysis creation view.
Thank you in advanced! :)
Javier
Edited by: user13724353 on 07-jun-2011 7:30

Hang on a minute... I think this is possible.
Set up two dashboard prompts to populate 2 presentation variables for your first and second months.
Once you have a presentation variable you can fix the value of column 3 and 4 using the "Filter using" syntax (check the functions list when you edit the column formula). By using Filter using you should be able to pass in the value of your presentation variable.
Paul
http://total-bi.com

Similar Messages

  • Filter on Fact columns at report level- obiee 11g

    Hello,
    The error I am getting in my report is : Incorrectly defined logical table source (for fact table SUMM) does not contain mapping for [LEDGERFACT.CD, LEDGERFACT.YEARID].
    The Model(Physical and BMM Layer) is as follows: DIM_LF_B is joined to 2 fact tables LEDGERFACT and SUMMARY
    DIM_RPT_PARAM -> DIM_LF_B -> LEDGERFACT
    DIM_RPT_PARAM -> DIM_LF_B -> SUMMARY
    Note that the aggregation is not set for any of the Fact columns. (I am aware that all measures have to be set some aggregation type , but Client restrictions as not to edit the rpd :( )
    Now on the report front, i have pulled following columns:
    >> Col name: Description ||| Forumla: DIM_RPT_PARAM.ITEM_DESC
    >> Col name: Actual Amt ||| Formula: case when SUMMARY.MONTHID=3 and SUMMARY.YEARID=2012 then sum(SUMM.AMT_1) else 0 end
    >> Col name: Plan Amt ||| Formula: case when LEDGERFACT.YEARID=2012 and LEDGERFACT.CD=300 then sum(LEDGERFACT.AMT_1) else 0 end
    I am not able to understand as to why the BI server is throwing the error.
    I tried removing the case condition and just applying the sum(as below), and the report comes up.
    Col name: Description ||| Forumla: DIM_RPT_PARAM.ITEM_DESC
    Col name: Actual Amt ||| Formula: sum(SUMM.AMT_1)
    Col name: Plan Amt ||| Formula: sum(LEDGERFACT.AMT_1) Also for the following combination the report works
    1)
    >> Col name: Description ||| Forumla: DIM_RPT_PARAM.ITEM_DESC
    >> Col name: Actual Amt ||| Formula: sum(SUMM.AMT_1)
    >> Col name: Plan Amt ||| Formula: case when LEDGERFACT.YEARID=2012 and LEDGERFACT.CD=300 then sum(LEDGERFACT.AMT_1) else 0 end
    2)
    >> Col name: Description ||| Forumla: DIM_RPT_PARAM.ITEM_DESC
    >> Col name: Actual Amt ||| Formula: case when SUMMARY.MONTHID=3 and SUMMARY.YEARID=2012 then sum(SUMM.AMT_1) else 0 end
    >> Col name: Plan Amt ||| Formula: sum(LEDGERFACT.AMT_1)
    Any help appreciated.
    Thnks,
    Shruti
    Edited by: 970002 on Mar 28, 2013 7:18 AM

    Hi Shruthi,
    To be clear you have one table 'DIM_LF_B' and its separated out as FACT and DIM in BMM layer with respective formulas ? If yes check this http://www.varanasisaichand.com/2012/04/fact-and-dimension-from-single-source.html
    let me know if it is different
    Thanks,
    Saichand

  • Filename seperately & Putting data from Hash Map to two different columns

    The following code produces the output as :
    $ java getNamefile
    File Name : reaper.txt
    File Name : Testing
    Is it possible to just get the file name "reaper" from it instead of reaper.txt
    import java.io.*;
    class getNamefile
         public static void main(String[] args)
              File f1 = new File("C:/javamyprograms/reaper.txt");
              File f2 = new File("C:/javamyprograms/Testing/");
              System.out.println("File Name : " + f1.getName());
              System.out.println("File Name : " + f2.getName());
    }Secondly I am trying to put the values from a HashMap into ".xls"
    PrintWriter out = new PrintWriter (new FileWriter("Unique_words_count" + file) + ".xls");
    and out.write(key + " " + hm.get(key));
    This put the values in the same columns. I want the results to be two different columns like
    column1 column2
    key1 value1
    key2 value2
    Please do advise. Thanks in advance.

    Is it possible to just get the file name "reaper"from it instead of reaper.txtActually, I ran a test, and
         System.out.println(  "file name portion == " + ( f.getName().split( "\\." ) )[ 0 ] );works also:
    This has the same effect as:
         String fileName = f.getName();
         String splitFileName[] = fileName.split( "\\." );
         System.out.println(  "file name portion == " + splitFileName[ 0 ] );Now that I think about it, the second form is more easily understood. There is really no reason to do it the first way. Just interesting to note that you can.

  • How can I get these two results in two different columns?

    SELECT COUNT(attr_id)
    FROM pv_attribute
    WHERE port_id = 322;
    SELECT COUNT(attr_id)
    FROM pv_attribute
    WHERE port_id = 323;
    How can I get these two results in two different columns?
    Thanks

    So Jens made a tiny mistake with the column name... shame you couldn't be bothered to research Pivoting so you could have corrected the mistake (possibly it was deliberate *{:-) ) and learnt something.
    with pv_attribute as (select 16123 attr_id, 322 port_id from dual union all
                          select 16123 attr_id, 322 port_id from dual union all
                          select 19223 attr_id, 322 port_id from dual union all
                          select 11193 attr_id, 323 port_id from dual union all
                          select 13163 attr_id, 323 port_id from dual)
    -- end of test data setup
    select sum(decode(port_id, 322, 1, 0)) cnt_322,
           sum(decode(port_id, 323, 1, 0)) cnt_323
    from   pv_attribute
    where  port_id in (322, 323)

  • Display two different column types in cross tab

    I am using Cross Tab template in crystal XI and I have to show two different column types one is of type int and other is of type string. Below is the format of the report
                                  AmountGiven             Amount Spent            Attended
    Mike                       5000                              3000                         Yes
    Steve                     200                                 200                           No
    Is there a way I can do this showing "yes" or "no" in the third column???
    Thanks...

    Hi
    If you are trying to show "yes" or "no" for a column value in a cross tab, then yes we can try using a formula for it.
    I would suggest you 2 ways that you can try at your end:
    1.
    a) Create a formula in the cross tab expert and write your condition.
    for eg: if Sum({Orders.Order amount}) > 5000 then "yes" else "no"
    b) Then select that formula in the summarized fields in cross tab expert and change the summary to MODE.
    c) You can see the "yes" and "no" Within the same box.
    2.
    a) Add a field to the colums in the cross tab expert.
    b) A column gets inserted in the cross tab.
    c) Right click the field and select format field.
    d) Go to Common tab and write a formula for the display string.
    e) Write the condition in that formula.
    f) You can see a new column with the expected values.
    Hope this helps you..
    Please revert incase of any queries.
    Regards
    Pradeep Hulke

  • Getting DISTINCT count from two different columns

    Hi all,
    I have following query which gives currency code from two different tables. I would like to get the distinct count of currency codes from these two different columns.
    SELECT eb.person_seq_id, eb.bonus_amount, eb.currency_cd, ed.currency_cd_host
    FROM fr_emp_bonuses eb, fr_emp_details ed, fr_periods p
    WHERE eb.person_seq_id = ed.person_seq_id AND ed.period_seq_id = eb.period_seq_id
    AND ed.period_seq_id = p.period_seq_id AND p.period_status = 'CURRENT'
    AND eb.bonus_amount >= 0 AND eb.person_seq_id = 3525125;
    This query gives following result
    3525125     240000     USD     INR
    3525125     0      USD     INR
    3525125     60000      USD     INR
    3525125     50000      USD     INR
    There are two distinct currency codes (USD, INR) and total amount is 350000. So I am looking for a query to give me the following result
    3525125     350000 2
    Thanks in advance

    Hi,
    Here's one way:
    WITH     original_query     AS
         SELECT  eb.person_seq_id
         ,     eb.bonus_amount
         ,     eb.currency_cd
         ,     ed.currency_cd_host
         FROM     fr_emp_bonuses         eb
         ,     fr_emp_details          ed
         ,     fr_periods          p
         WHERE      eb.person_seq_id    = ed.person_seq_id
         AND      ed.period_seq_id    = eb.period_seq_id
         AND      ed.period_seq_id    = p.period_seq_id
         AND      p.period_status         = 'CURRENT'
         AND      eb.bonus_amount     >= 0
         AND     eb.person_seq_id    = 3525125
    ,     unpivoted_data     AS
         SELECT     person_seq_id
         ,     bonus_amount
         ,     currency_cd
         FROM     original_query
        UNION ALL
            SELECT  person_seq_id
         ,     0               AS bonus_amount
         ,     currency_cd_host     AS currency_cd
         FROM     original_query
    SELECT       person_seq_id
    ,       SUM (bonus_amount)          AS total_bonus_amount
    ,       COUNT (DISTINCT currency_cd)     AS distinct_currency_cds
    FROM       unpivoted_data
    GROUP BY  person_seq_id
    ;There may be a shorter, more efficient way to get the same results, but without knowing more about your tables, I can't tell.
    The tricky thing is getting two columns (currency_cd and currencuy_cd_host in this case) counted together. You can't simply say
    COUNT (DISTINCT eb.currency_cd) +
    COUNT (DISTINCT ed.currency_code_host)That happens to get the correct result with the sample data you posted, but what if you had data like thEe following?
    currency_cd     currency_cd_host
    INR          USD
    USD          INRHere, the count of distinct currency_cds is 2, and the count of distinct currency_cd_hsots is also 2. Does that mean the grand total is 2 + 2 = 4? No, the 2 codes in one column arte the same 2 codes as in the other column. We need to get both currency_cd and currency_cd_hsot into the same column, and then do COUNT (DISTINCT ...) on that combined column. A UNION, as shown above, will certainly do that, starting with your query as you posted it. The query you posted isn't necessarily the best frist step towards this result, however, so there may be a much better approach, depending on your tables.
    Edited by: Frank Kulash on Feb 1, 2012 6:21 PM
    Here's a slightly shorter, and probably more efficient way to get the same results:
    WITH     cntr     AS
         SELECT     LEVEL     AS n
         FROM     dual
         CONNECT BY     LEVEL     <= 2
    SELECT       eb.person_seq_id
    ,       SUM (eb.bonus_amount)          AS total-amount
    ,       COUNT ( DISTINCT CASE
                        WHEN  c.n = 1
                        THEN  eb.currency_cd
                        ELSE  ed.currency_cd_host
                      END
              )               AS distinct_currency_cds
    FROM       fr_emp_bonuses    eb
    ,       fr_emp_details    ed
    ,       fr_periods          p
    ,       cntr              c
    WHERE        eb.person_seq_id  = ed.person_seq_id
    AND        ed.period_seq_id  = eb.period_seq_id
    AND        ed.period_seq_id  = p.period_seq_id
    AND        p.period_status   = 'CURRENT'
    AND        eb.bonus_amount   >= 0
    AND       eb.person_seq_i   = 3525125
    --       NOTE: no join condition involving c; we really do want a cross-join
    GROUP BY  eb.person_seq_id
    ;

  • Sum two different columns from two different tables

    Can you select and sum two different columns, from two different tables in the same sql statement?
    i.e.
    table1
    Item----OnHand_Qty
    A--------10
    A--------15
    B--------10
    B--------10
    C--------20
    table2
    Item----Trx_Qty
    A--------2
    A--------4
    A--------6
    B--------1
    B--------1
    C--------4
    I'm looking for the following results from a query
    Item----Sum(Onhand_Qty)---Sum(Trx_Qty)
    A--------25

    Like this?
    SQL> create table table1 (item,onhand_qty)
      2  as
      3  select 'A', 10 from dual union all
      4  select 'A', 15 from dual union all
      5  select 'B', 10 from dual union all
      6  select 'B', 10 from dual union all
      7  select 'C', 20 from dual union all
      8  select 'D', 30 from dual
      9  /
    Tabel is aangemaakt.
    SQL> create table table2 (item, trx_qty)
      2  as
      3  select 'A', 2 from dual union all
      4  select 'A', 4 from dual union all
      5  select 'A', 6 from dual union all
      6  select 'B', 1 from dual union all
      7  select 'B', 1 from dual union all
      8  select 'C', 4 from dual union all
      9  select 'E', 3 from dual
    10  /
    Tabel is aangemaakt.
    SQL> select nvl(t1.item,t2.item) item
      2       , t1.sum_onhand_qty
      3       , t2.sum_trx_qty
      4    from ( select item, sum(onhand_qty) sum_onhand_qty
      5             from table1
      6            group by item
      7         ) t1
      8         full outer join
      9         ( select item, sum(trx_qty) sum_trx_qty
    10             from table2
    11            group by item
    12         ) t2
    13         on (t1.item = t2.item)
    14  /
    I SUM_ONHAND_QTY SUM_TRX_QTY
    A             25          12
    B             20           2
    C             20           4
    E                          3
    D             30
    5 rijen zijn geselecteerd.Regards,
    Rob.

  • OBIEE Answer : SQL Filter for one column of the Dashboard sample : 201301

    I need to filter the report on the basis of one of the filter on the column which is created by custom calculation :
    YEAR ("Order Header Attributes"."Status Date" ) * 100 + WEEK("Order Header Attributes"."Status Date" )
    and this in the Number format.
    I need the filter as : 2013 + Week(CurentWeek) -1 = 201302
    Please help me create a custom SQL filter for the same.

    Anitha ,
    I am getting the error while doing it with Prompt :
    I went to the Dashboard on top Left next to results there is a Prompt there i clicked a new prompt i gave a name , description selsected my column in Filter on Column
    Operator : = is equal to / is in
    How should the user choose a value or values?
    * Select it from a drop-down list
    Browse through choices and/or type in directly
    * Single Value Only
    What values should be shown to the user?
    None
    All Values
    Limited Values
    * SQL Results (year("Status Date")*100) + WEEK_OF_YEAR("Status Date")-1)
    (The values returned by this SQL statement)
    Other options
    Choices per page
    (leave blank for automatic setting)
    Allow user to constrain choices
    Allow user to skip prompt
    I am doing correctly please help me in case i am not doing it correctly
    Regards ,
    Nidhi

  • How can I join/Full outer join two different columns instead of union all?

    Hi,
    I have a scenario as the following:
    I am performing set operations using obiee 11g where I want to take values from two different criteria. Howwver, I dont want union to take place, instead i want join to take place to see all the columns in the output.
    For that, I tried changing the sql in advanced tab and tried to put full outer join instead of union all but its not allowing me to change.
    How can I achieve it? please help.
    Thanks.

    Hi,
    My problem is that I am unable to modify the sql in advanced tab. Probably due to some security reason,it's restricting me to change.
    Can you suggest me a way to change it?
    Thanks..

  • Different calculation on each column in table in obiee 11g report??

    Hi ,
    I have to display values in a table for measures in obiee 11g report which should hold different calculation on each column. For ex:
    Result 1:
    Flag  Display   Transaction  Amount
      C      'A'                 2              3
      C      'B'                 3               0
           SubTotal1            5             3
    Result 2:
    Flag  Display   Transaction  Amount
      H      'C'                 2              11
      H      'D'                  0              0
           SubTotal2          2             11
    Result 3:
    Flag  Display   Transaction  Amount
      H      'C'                 1              0
      H      'D'                  1            0
           SubTotal3          2            0
    Final Result:(Transaction shd hold :-subtotal1-subtal2 , Amount should hold:-subtotal1-subtal2+subtota3)
    Flag   Display               Transaction         Amount
    C    'total tran(1-2)              3                     8
           Total Amnt(1-2+3)'     
    Please help me how can i achieve this ... ??? I am new to OBIEE 11g.
    Thanks,
    Pavi

    There are a few things I cannot understand; I'm assuming Transaction and Amount are fact columns. Then how do they have different values for the same values of Flag and Display ??
    Anyway, sub total can be achieved by going to edit view for the table and from columns and measures area under the Layout pane click on the summation icon and select After.  This will automatically display a grand total value at the bottom of each fact column.
    Now, to get the final result, say Total Transaction you can add a dummy column and edit its formula.
         Total Transaction = trans_subtotal1 - trans_subtotal2 and
         Total Amount = amt_subtotal1 - amt_subtotal2 + amt_subtotal3
         Now if we could say that trans_subtotal1 is the total of transaction value when Flag = 'C' or something like that then you can get this value of subtotal1 by using the formula FILTER(SUM("Subject Area"."Folder".Transaction Column") USING (DESCRIPTOR_IDOF("Subject Area"."Folder"."Flag column") = 'C')).  Similarly we can obtain subtotal2 and subtract them to get the total transaction value.  But I am sure if we can do this because for the same values of Flag and Display, Transaction has different values.  But by using the above formula, the values we obtain for subtotals 2 and 3 will be the same.  So calculating Total Amount would be a problem.
    The above formula is obtained by going to edit formula and selecting the filter option at the bottom of the edit dialog box.
    Hope I made my point clear

  • SQL Server Reporting Services- Coloring a Cell Background Based on two different column group values

    Hello All,
    I have a matrix report with time scale on the x axis  and Resources on Y axis Showing the tasks assigned to each resource for a period of time. Here I have to color a matrix cell showing task details on tool tip with background color of the cell.
    So Please help me on this.I have a expression like this...
    In my case the color should be filled for the cell with name "Fields!task_name.Value" based on the values of "Fields!Day_Wise.Value " where we have the values for Daywise as S,M,T,W,T,F,S. So i need the background for the cell with name
    task_name as Light Grey on Friday and Saturday, But we have the same name S for sunday also, which should come in different color.
    =iif(Fields!Day_Wise.Value ="F","LightGrey",
    IIF(PREVIOUS(Fields!Day_Wise.Value) ="F","LightGrey",
    iif(Fields!task_name.Value="","White",
    iif(InStr(Fields!task_name.Value,"||")>0,"Maroon",
    iif(InStr(Fields!task_name.Value,"NULL")>0,"Sienna",
    iif(InStr(Fields!task_name.Value,"Pink")>0,"Pink",
    iif(InStr(Fields!task_name.Value,"Red")>0,"Red",
    iif(InStr(Fields!task_name.Value,"Purple")>0,"Purple",
    iif(InStr(Fields!task_name.Value,"Green")>0,"Green",
    iif(InStr(Fields!task_name.Value,"White")>0,"White",
    iif(InStr(Fields!task_name.Value,"Cyan (Teal)")>0,"Teal",
    iif(InStr(Fields!task_name.Value,"Olive")>0,"Olive",
    iif(InStr(Fields!task_name.Value,"Blue")>0,"Blue",
    iif(InStr(Fields!task_name.Value,"Light Blue (Aqua)")>0,"LightBlue",
    iif(InStr(Fields!task_name.Value,"Yellow")>0,"Yellow","Black"
    Thanks
    AJ Hameed

    Hi AJ Hameed,
    According to your description, you want to set the background color for the cells based on the values inside of cells and the values the column group. You want to set grey for cells on Friday and Saturday, set colors based on the task name on other weekdays.
    Right?
    In Reporting Services, there's no problem if we have two different data values in conditional expression, so we can set background color based on Day_Wise or task_name. One issue in this scenario is, we can't have value "S" for both Saturday and Sunday when
    working in a matrix. Otherwise the task_name will overwrite the previous task_name (for numeric values, it will do sum calculation). So we suggest you change the values for weekdays in database. The expression you have posted was correct. It only has a small
    issue: the "Light Blue(Aqua)" also contains "Blue", so when doing conditional judging, the expression will return "Blue" instead of "Light Blue". We have tested in our local environment. For viewing convenience, we used the Switch() function in our expression:
    =IIf(Fields!Day_Wise.Value="Fri" or Fields!Day_Wise.Value="Sat","LightGrey",
    Switch(
    InStr(Fields!Task_name.Value,"White")>0,"White",
    InStr(Fields!Task_name.Value,"||")>0,"Maroon",
    InStr(Fields!Task_name.Value,"Pink")>0,"Pink",
    InStr(Fields!Task_name.Value,"Red")>0,"Red",
    InStr(Fields!Task_name.Value,"Purple")>0,"Purple",
    InStr(Fields!Task_name.Value,"Green")>0,"Green",
    InStr(Fields!Task_name.Value,"Cyan(Teal)")>0,"Teal",
    Fields!Task_name.Value="","White",
    InStr(Fields!Task_name.Value,"Olive")>0,"Olive",
    InStr(Fields!Task_name.Value,"Blue")>0,"Blue",
    InStr(Fields!Task_name.Value,"Aqua")>0,"LightBlue",
    InStr(Fields!Task_name.Value,"Yellow")>0,"Yellow",
    InStr(Fields!Task_name.Value,"Orange")>0,"Orange",
    InStr(Fields!Task_name.Value,"Null")>0,"Sienna",
    true,"Black"
    The result looks like below:
    Reference:
    Matrices (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • How to download data into  two different columns 2003 excel format in ole

    Hi ALL
    when we download data into excel using ole with delimiter it works fine in 2007 but when we check this with 2003 format
    both fields come in only one column .Can any one suggest  
      CONCATENATE WA_ALL-PERNR LV_ICNUM INTO WA_PERNR SEPARATED BY W_DELI   IN CHARACTER MODE.

    If you're already using OLE, you can fill in value for each cell separately instead of using a delimiter. Something like this fragment:
    FORM fill_cell USING p_row p_col p_value.
      CALL METHOD OF obj_excel 'CELLS' = obj_cell
        EXPORTING
        #1 = p_row
        #2 = p_col.
      SET PROPERTY OF obj_cell 'VALUE' = p_value.
    ENDFORM.                    "fill_cell

  • How to link two different columns in two different UDTs

    hi all
    by using linkedtable() i am able to link to a particular table but my requirement is linking to a particular column of that table how to do this . can i get a sample code

    SAP Business One only supports linkage between UDTs (e.g. @NMS_Person / @NMS_PersonX; NMS is your namespace (use XX if this is just about customer functionality)) through @NMS_PersonX.Code to be linked to @NMS_PersonID.PersonID.
    If this doesn't meet your requirements you have to work with non-B1-UDTs (any "stand-alone"/"custom" table) + e.g. use foreign keys - or do the linkage through some checks in your code.

  • To calculate variance from two different columns

    Hi
    I have a table like this
    create table temp1
    (f_name varchar2(100),
    f_month_Year Varchar2(10),
    f_amount integer
    Records in this table will be like this:
    f_name          f_month_Year f_amount
    Ajay 092007      500
    Bhavani 092007      700
    Bhavani 102007      200
    Ajay 102007      100
    I would like to get the Output like following:
              092007(Previous Month) 102007(Current Month) Variance
    Ajay 500                100           400
    Bhavani 700                200           500
    the variance should be precalculated in the query itself.
    Please help me on this.
    Regards
    Sankar

    LAG
    <br>
    <br>
    Example:
    <br>
    <br>
    SQL> select * from t;
    NAME                 DT                          AMT
    Ajay                 092007                      500
    Bhavani              092007                      700
    Bhavani              102007                      200
    Ajay                 102007                      100
    SQL> select name,curr,pre,pre-curr var
      2  from
      3    (select name,
      4         lag(amt) over(partition by name order by to_date(dt,'mmyyyy')) pre,
      5        amt curr,dt
      6     from t
      7    )
      8  where dt = to_char(sysdate,'fmmmyyyy');
    NAME                       CURR        PRE        VAR
    Ajay                        100        500        400
    Bhavani                     200        700        500                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Hiding columns in pivot table OBIEE 11g

    Hi experts,
    I am trying to create a pivot table with individual values in columns but I also need to display a grand total as values but also as percentage and as cumulative percentage.
    I duplicated the measure once in the measure area, and selected display data as percentage of column, and another time using display cumulative and percentage of column.
    The result is fine, but all the elements are displayed as column for the percentage and for the cumulative. Or, I only need the Grand Total Percentage and Cumulative, but I don't need all the columns for Percentage and cumulative.
    I have tried to find out a way to customize the XML but nothing good.
    Is there a way to display only the grand total for percentage and cumulative without having to display all the individual columns?
    Any help highly appreciated.
    Regards

    If I get your question correctly.. You are trying to present the grand total towards the end of the Pivot and OBIEE is displaying the totals of all the sections and then the Grand Total.
    Try not to use the grand total of the sections but create a new pivot view and just display the grand total in that view.
    So you will have your normal sections and then another pivot view just for the grand total.
    As far as I know, there is no option to hide the individual section totals.

Maybe you are looking for