OBIEE - Documentation or tutorial for the Sample Sales example

HI,
Do we have any documents or tutorials for the sample sales example that comes with the OBIEE installation.
I have completed the Oracle By Example trainings. Now I am exploring the Sample Sales rpd and am finding it difficult to understand the different mappings and their functional implications as well as the steps to create them.
So I was wondering if there are any documents which explains the sample sales example. I am using OBIEE 10g.
Thanks for your help.
Regards,
Anand

Hi Anand,
Check the 'Sample Sales Content Guide'on; http://www.oracle.com/technetwork/middleware/bi-foundation/obiee-samples-167534.html
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

Similar Messages

MRP creating additional purchase requisitions for the existing sales order

Hi,
We have scenario where we switch materials from POD material to ARP material. POD material is just like make to procurement which creates purchase requisition and purchase order upon saving the sales order. ARP (Auto replenishment) material creates purchase requisition based on sales order and re-order point while running MRP.
When the material is POD title, it created purchase requisition and purchase order (example: 4500000110) while saving the sales order (example: 1000000010) for the quantity 10. After some time this material is switched to ARP and it has open sales order (1000000010) and purchase order (4500000110).
We have special MRP run for ARP materials based on MRP type, which creates purchase requisition.. What is happening is when we run MRP; it is creating new purchase requisition for the old sales order (1000000010) for the quantity 10. But old sales order (1000000010) is already having purchase order (4500000110) to fulfill. So we donu2019t want to create new purchase requisition for the old sales orders. It should create purchase requisition only for new sales orders.
Please advise
Thanks in advance
Srinivas

Mangesh,
If the components are Inhouse production then you can think of using collective orders by assigning special procurement key 52. If raw material exists then your requirement cannot be met..as i think your scenario is of assembly processing. The idea of assembly processing is that component materials will always be available and only assembly will be done based on Sale Order.
Regards,
Prasobh

Can I use a substitute for the Sample Clock?

I have three different analog inputs coming from one device (PCI-6221). Two inputs are running at the same sample rate while the third needs a faster sample rate and a trigger. I have these seperated as two seperate tasks but my problem is they both use the sample clock. Can I use a substitute for the sample clock on the third channel?
I am running LabVIEW 8.2 on Windows XP.
Thanks in advance for your help.
Ron Deavers, CLD

Hi programmindragon,
I understand you are trying to
configure your PCI-6221 to sample on multiple channels, while having
different rates and triggers for the channels. Unfortunately, you can
only configure one analog input task to run at once and all the channels in
the task must share the same configurations, including the sample clock
and trigger. This is due to the fact that all the channels are
multiplexed to a single amplifier and ADC on the device. Thus, you will
not be able to configure the two inputs at one rate and use a different
clock rate and trigger for the third input. Is it possible to sample at the
maximum rate on all channels and decimate the data that you don't need on the certain
channels, as well as share the same type of triggering? Hopefully you will be able to run your application with the same configuration across multiple channels, otherwise you may need multiple DAQ devices. Please let me know if you have any further questions related to this issue.
Regards,
Daniel S.
National Instruments

In the Apps "Pages" is there a tutorial for the Business Cards Templet?

In the Apps "Pages" is there a tutorial for the Business Card Templet?

Peter I see you are humble, as my self. I don't see a way to easily fill all the individual cards on the templet. Pages '09 version 4.1 (923)
I first started using Business Card Templets with Microsoft Publisher back in 2000. Initially I filled out a business card and was given a choice to print 8 or 10 cards to a page. Since then I have been out of the loop due to illness, Pages '09 give me the choice to print 8 and 10 cards to a page but I'm missing the initial step. laughing about it but confused too

Where can I find the script for the sample table?

Hi,
Where can I find the script for the sample tables, like emp, dept, ... ?
Regards,
Rosaline

http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/appdev.817/a77069/preface.htm#420431
Hi,
Where can I find the script for the sample tables, like emp, dept, ... ?
Regards,
Rosaline

How to Create Interactive report lists for the gross sales, credit ....

How to Create Interactive report lists for the gross sales, credit returns, and gross weight for the customer for the current year and comparing the same with that of the previous year for the same period.....
plz tell me steps to accomplish this....plz ...give me the detail description..plz......many many thnx in advance...

Hi raja,
Display a checkbox , customer number on the basic list and also set a GUI STATUS on the basic list.....
Select the customer by checking the checkbox and click on the button you create in the GUI status....
Write the desired code to be displayed in
AT USER-COMMAND even checking the sy-ucomm....
so this would make you to into interactive list...
Hope this would help you.
Regards
Narin Nandivada

Delivery from Project for the Assembly: sales order item

Hi,
When I create a sales order lets say for material "A".
And I want to deliver this component from sales order. With Production order.
I have attached the material "A" in Project to an activity with a positive quantity, in MD04 I am unable to see the planned order for that.
Project is released and it has created a order reservation but i am unable to convert it into the Planned order how it can be achieved.
Material is not relevent for the MRP.
Please suggest some solution.

Hi,
Please run project MRP (MD51), selecting option 3 (planned orders) against create P.req. field under MRP control parameters tab.
Planned orders will be created automatically & u can see in MD04 also.
Thanks
Kishore

Partner redetermination in CRM for the replicated Sales contract from ECC

Hello Friends,
We are facing a typical issue, Our sales process is, we are creating Sales contract in ECC and replicating it in CRM. Problem area is we want to determine the Employee with the Territory ID in the CRM. Issue is the User will not be aware, who is the Employee responsible for the particular Sold to Party at the time of creation in ECC.
Config details:
1. Partner function related to Contracts are
    Sold to Party
    Ship to Party
    Bill to
    Payer
    Employee Responsible
    Employee _ Territory
2. Sales Contract is created in ECC and replicates in to CRM
3. Created Z partrner function for Employee_Territory and access seq assigned is 0030:Preeceding docyment>Territory>User
4. All the Partner function in ECC are determined through the Source as Sold to, except Employee_Terrritory, which is manual
5. Partner function value is manually maintained for Employee_territory in ECC sales contract
6. When replicated to CRM, I want this Employee_Territory to be redetermined based on the Territory attributes like Business partner Zip code
Kindly let me know, how to achieve it through configuration or if there is any BADI which requires minimum development.
Thanks,
Anup Bansal

Hey!
You can use badi COM_PARTNER_DETERM to determine partnter function based on Determination Sources.
You might also use user-defined callback function to realize your business requirement based on event handle technology.

2 pricing procedures for the same sales area

Hi Gurus.,
              My client requirement is the client requires 2 pricing procedures for the combination of Same sales areaDEocument Pricing procedurecustomer pricing procedure in OVKK
He doesnt want to use new sales area or new document pricing procedure or new customer pricing procedure,I know that in standard SAP it is not possible.
Can any of the gurus throw some light on this.Some work around is required here,So can u please say the required changes in Standard functionality.
Thanks & Regards
Narayana
Message was edited by:
        manam narayana
Message was edited by:
        manam narayana
Message was edited by:
        manam narayana

Hi Gurus.,
               First of all thank you very much for giving me so tremendous response, But my client requirement is,
              He has one customer and for that customer when raising an order ,for some orders Tax shouldnot caliculate and for some orders Tax should be caliculated,
        For example : If he gives price 100,Then the base price should be 100,For some orders he gives price as 130 rs which is inclusive of tax like 110 should be the base price and 20 rs tax should get caliculated
           So i have tried in the pricing procedures and we have standard pricing procedure RVAA01 & RVAB01 ,In which RVAB01 is the price inclusive of tax procedure,We can assighn different pricing procedures if any of the combination in OVKK is changed,But he dont want to change the combination in OVKK.
        So client asks now when he raise an order he decides how the price should be caliculated, i.e the price may be he give price or price inclusive tax,of which the pricing procedure should automatically split the tax and price accordingly,He is asking in the way like when we raise a sales order we should do like a pop up box should appear asking which pricing procedure should be selected,So on selecting the pricing procedure the order should caliculate based on the selected pricing procedure
Thanks & Regards
Narayana

Is there a tutorial for the iMovies App for the iPhone?

I cannot figure out all of the features and things that are not there that make to have. In other words, it's not all intuitive. Does anyone have some good tutorial for us to use? Also, is this app it? I mean, are there other features or plug-in's or extensions that I can buy to get more transitions, themes, etc.? How do I fade the audio on the music and get more that 1 song track on there? Can I add a specific song to each video clip? Is there a way to put some text in the middle of clip or just at the end without having a completely different clip? Maybe I am asking too much, but any help would be appreciated. Thanks.

Thanks for the good info. I think I was hoping for a few more features, even though it is pretty nice for a phone app. It would be nice to some additional granularity of control and more options for themes and transitions. Maybe, Apple will consider that as another version/pro version of iMovies/or add-on... hint, hint... wink, wink... nudge, nudge... know what I mean, know what I mean, eh?!?! Yes, that was a reference to Monty Python!
Message was edited by: riversen

EDI Config steps for the IC sales invoice to post invoice receipts

Hi experts,
I need to setup EDI in which the Intercompany sales invoice in company A auto triggers the incoming invoice receipt posting in company B.
My scenario is as below:
1. Company C places a PO to Company B
2. Company B creates a sales order for Company C in which the delivering plant assigned belongs
to Company A.
3. Company A ships the parts directly to Company C
4. Company A bills intercompany B
5. Sales invoice created in step should auto create the incoming invoice receipt at Company B
6. Company B then bills Company C
I need to setup the above mentioned in step no:5.
Could you send me the configuration steps to establish the above?
Thanks for your great help !
Regards,
Pri

Hi Prakash,
Thanks for your reply. Since there is no PO in this step which are the only required steps for me to
proceed with?
We already have the steps in our system which works fine for PO based invoice receipts.
With the steps to be there already in the system, when I try to post the intercompany billing & if I add
RD04 manually for now for my testing, it says
"No entry in Outbound table not found"
"No Partner profile (Outbound parameter) could be found using the following key,
//SI3300 / KU / RE / INVOIC / FI
I do not know where this Partner type RE comes from. Do you have any idea?
Regards,
Pri

Fiding valid idoc for the given sales document

hi,
Please send me the code for the 'finding whether valid IDOC exists for a given sales document'..
It is very urgent.....................
Thanks in advance............

If you are not familiar about manual steps check below..or else you can read directly from EDIDS table, just straight forward selection.
VA02 or VA03
>From menu>click System
-->Click service for object
-->Click Relationship
-->You will see idoc number in case if order created from idoc
Thanks,
Narayan

How to enable the edit option for the sample downloaded portlets

Hi,
I had downloaded some samples from the portal studia site. Here is the folowing URL
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/GUIDELINES.PARAMETER.PASSING.HTML
This is related to passing the parameters between the portlets on the same page.
I'm able to install the samples and evnerunning them. But the funniest thing is i'm unable to edit the portlet.
Can Any shoot some answers for How to pass the parameters between the portlets.
I had also tried as Sharmila said in the following URL...
<A
href="http://forums.oracle.com/forums/message.jsp?id=1180583&gid=469632"
target=_new>Re: session state security
</A>
Guys and Gals .. I'm in neck depth trouble .. Please Do Rescue me ASAP.....
Thanks inadvance,
Sudheer Ravikanti.
[email protected]

Hi,
I think easiest way is re-create your report , so wizard do things for you.
Other vise you need create "search bar" region and items manually and edit report where clause.
You can first set your old report condition to never and create new report with same select.
When you are sure that new report working ok, you delete old report.
Br, Jari

Documentation on APIs for the Service Contracts.

Hi,
Can anyone please, point out some documentation for the Public APIs provided under the Service Contracts for R12.
Though I can look at the source code of the APIs, I cannot figure out what parameter is used for what, due to lack of proper comments in the PL/SQL code.
Any pointers would be of great help.
Thanks in Advance,
Vijay

Please review the following notes/docs, it may be helpful:
Note: 421170.1 - R12 Oracle Service Contracts And Integration Repository Access
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=421170.1
Oracle Integration Repository User's Guide
http://download.oracle.com/docs/cd/B40089_09/current/acrobat/120irepug.pdf

Count deliveries for the same sale sorder

Hello
I would like to use the query to count how many deliveries have been made for the sales order
I have the following but it gives me an error message because I do not know how to use the function count
COUNT T0.BaseEntry FROM ORDR T0, DLN1 T1 WHERE (T0.DocEntry = T1.DocEntry) AND T1.BaseRef = $[$38.44.11.Number]

thanks for your prompt reply
I found the answer and you confirm this
SELECT COUNT (T1.BaseEntry) FROM ORDR T0, DLN1 T1 WHERE (T0.DocEntry = T1.DocEntry) AND T1.BaseRef = $[$38.44.11.Number]
If you remember I need to number the back order when I have the result in that query will be used in the delivery note process table ORDR.
Then when the result is 1 it will be numbered as A
When the result is 2 it will be B and so on

OBIEE - Documentation or tutorial for the Sample Sales example

Similar Messages

Maybe you are looking for