OBIEE - How to make one presentation variable dependent on the other

Hi,
I have the following requirement. In a prompt say there are two columns acting as filters:
Columnfilter1 Columnfilter2
Now the columnfilter2 is constrained based on columnfilter1.
The user wants that, upon logging only the columnfilter1 should have default value set and not columnfilter2. And the report should run in the following way:
If only columnfilter1 is entered at the prompt and not columnfilter2. Therefore it should give values for all the columnfilter2 values wrt columnfilter1.
and
if both the prompts are entered, then the report should filter on both the columnfilters.
I dont know how to set the above to conditions in the report.Please let me know how should i proceed.
Thanks

Hi,
Thanks for the reply.. I think i did not pose question properly.. In my report I have the following requirement:
Column1 Prompt Column2 Prompt
Where column2 prompt depends on the column1 prompt such that there is a hierarchy, column1 (parent) --> column2 (child)
Now, if in my report i need to display measures by comparing column1 and column2 prompts with parallel set of column1 and column2 values of another hierarchy.
now, if column1 prompt is chosen and no column2 prompts are chosen then, then alll values of column2 are considered. Now I want to put a condition of comparison when all values are considered and a different condition of comparison when a specific value for column2 prompt is entered. How do i do that?? I thought of using default value in the condition statement. But its not working. Maybe I am implementing it wrong.
Could you let me know how to achieve the above?
Let me know if you need any other details.
Thanks,

Similar Messages

How to use one NIC for everything and the other to allow ssh from

Hello,
I have two internet connexion at home:
- a cable connection (CABLEBOX) that i use for all of my devices as it's the fastest. All my computers are connected to it using ethernet or wifi.
- an adsl connection (ADSLBOX) that is connect to the second network card of one of my computers (MEDIABOX) only and that i want to use only to ssh that same device from the outside
I want that specific computer to use its:
- NIC1 to connect to the LAN and to the internet. Routing is enabled on CABLEBOX.
- NIC2 to connect to that device from the outside using ssh. ssh-D should also work through NIC2 as i need to be able to use that computer as a proxy on some occasions. Routing is enabled on ADSLBOX and it's set to port forward the port 22 to MEDIABOX.
Once this will be working i'd like to also route ftp connections to specific ips by NIC2.
No firewall is set on MEDIABOX yet, i'll do it later on.
I know basics on how to set routing rules, how to assign a specific LAN to a network card but i have a hard time on deciding which rules i should set...
Can someone guide me?
Thanks in advance
Last edited by parpagnas (2013-12-03 18:31:31)

A possible solution might be this.
On ADSLBOX and CABLEBOX configure different subnets for the LAN, e.g.
ADSLBOX: 192.168.1.0/24
CABLEBOX: 192.168.2.0/24
The MEDIABOX gets these static IPs:
ADSL-LAN: 192.168.1.2
CABLE-LAN: 192.168.2.2
On the MEDIABOX, configure the two network interfaces using two routing tables.
The ADSL-LAN routing table
ip route add 192.168.1.0/24 dev eth0 src 192.168.1.2 table 1
ip route add default via 192.168.1.1 table 1
The CABLE-LAN routing table
ip route add 192.168.2.0/24 dev eth1 src 192.168.2.2 table 2
ip route add default via 192.168.2.1 table 2
The main routing table
ip route add 192.168.1.0/24 dev eth0 src 192.168.1.2
ip route add 192.168.2.0/24 dev eth1 src 192.168.2.2
# use the CABLE-LAN gateway as default, so general internet traffic from MEDIABOX runs over CABLEBOX
ip route add default via 192.168.2.1
define the lookup rules
ip rule add from 192.168.1.2 table 1
ip rule add from 192.168.2.2 table 2
To test the setup:
ip route show
ip route show table 1
ip route show table 2
I don't know how to persist something like this in ArchLinux using netctl. Might require to write a special systemd unit for it. Above is a working example from a RedHat box at my company.
Last edited by teekay (2013-12-04 07:42:22)

I have 2 pages up I can't see how to exit one page and still have the other page up I have to close an re click on the icon

I do not see a way to close one page. I may have 3or4 different pages up but I cannot close one page with out having to close fire fox entirely. I have to go back to your icon and start all over. Thanks Dave In Austin Texas

Set the pref <b>browser.tabs.closeWindowWithLastTab</b> to false on the about:config page to prevent closing the last tab from closing the browser and make a close button appear if only one tab is open.
*http://kb.mozillazine.org/about:config
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How to make one dvd from several camcoder dvd's

How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's?

How to make one dvd from several camcoder dvd's. I got a dvd camcoder, to be able to play them into DVD player I had to finalize my disks. Now I got several DVD's whith short files and terrible custom camera menu. I'd like to make it more presentable.
The main problem is I dont want to recode my vob files. So Final Cut and other editing soft is bad idea.
Is there any soft on mac I could reauthor my DVD's?

HT5796 I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

Slide duration - How to make one slide have a different duration to another slide?

Slide duration - How to make one slide have a different duration to another slide?
EG So one slide has 2 seconds, another 4 another 6
All I can see is how to make all slides have the same duration
Any help very much appreciated!
Brian

Slide durations are not changeable on a slide-by-slide basis.

How to make a short clip out of the original one ?

Some days ago, I asked a question on editing a clip in this forum. The responder asked me to provide a few seconds of the clip for his examination. But I got stuck. I didn't know how to make a clip of a few seconds out of the original clip and that it had the exact same format and properties as the original clip.
Neither Premier nor After Effect have an ouput option such as "same as original source" .
So, my question is how to make a short clip out of the original one with everything the same properties as the original one.
Thanks in advance.

May be I haven't made myself clear
Sorry, but I think that I am still not following you.
I want to export and render the short clip to a new file which I want to have everything the same as the original clip. Just like I cut off a few seconds off it and that few seconds becomes an independent file.
OK, you have your original source file. It is complete and is also unaltered. If you want a "Copy" of it, just use Windows Explorer, or similar to make that Copy. If you want a separate file of your edited version of that source file (as it appears in the Timeline), use the WAB (Work Area Bar) to include just that edited instance of the source footage, and Export just the WAB. This will give you a separate file with the edits in it.
I still feel that neither is what you want. If you can step me through, maybe with screen-caps, what you have and what you wish to end up with, I can see the operation more clearly.
Good luck,
Hunt

How to make keynote presentation run automatically

how to make keynote presentation run automatically

Keynote can enter play mode when the file is opened:
Inspector > Document > Automatically play on opening

HT4642 ios numbers:how to make cell height variable with auto line brake setting ?

ipad numbers; How to make cell height variable with auto line break setting?

That's strange. I responded earlier and the whole message got trashed. Hence the test post before retyping the entire thing again.
Thanks for the reply.
The video clip is a single screen capture video clip. This is what I've found by playing around with this more.
The original clip resolution is greater than 640x480. If I use QT Pro to convert the original clip to 640x480 and then use either Flip4Mac or PE7, then the resolution looks good.
Just trying to figure out if should keep all workflow on the MacOS side. There are several different version of Flip4Mac. $49 gives me 640x480, but if I ever want to make it slightly larger then I would need to go with the $99 or HD version.
I also tried to export to AVI with QT Pro and the import with Windows MovieMaker but it didn't work really good. I liked the simplicity (since PE7 hogs a lot of resources especially through VMWare).

Hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

Soory, no, it is not possible. You can only combine multiple copies of the same book into one order.
Regards
Léonie

Populate a bind variable depending on the previous page.

Hi,
How do you populate a bind variable depending on the previous page (where the user is “branching from”)?
Example.
Page 10 has a report:
Select Value1_Desc
From Table
Where Value1_ID = :P10_VALUE1_ID
Page 5 can branch to page 10 and pass along the Value1_Desc from P5_VALUE1_ID into :P10_VALUE1_ID.
Page 8 can also branch to page 10 with an item value based on the same field, passing Value1_ID from P8_VALUE1_ID into :P10_VALUE1_ID.
Is there a way to make the report in page 10 accept the proper bind variable value depending on the previous page?
Thanks
Matt

Matt,
Page 5 can branch to page 10 and pass along the Value1_Desc from P5_VALUE1_ID into :P10_VALUE1_ID.Page 5 can branch to page 10 and pass along the VALUE1_ID from P5_VALUE1_ID into :P10_VALUE1_ID.
The normal method is to have the branch pass the value in the URL, e.g., the branch from page 5 would specify:
f?p=&APP_ID.:10:&SESSION.::NO::P10_VALUE1_ID:&P5_VALUE1_ID.
Scott

How do I get my iPad and IPhone synced where if I delete an email off one it is deleted off the other device?

How do I get my iPad and IPhone synced where if I delete an email off one it is deleted off the other device? I can get all the Apps and music from one to the other but why won't the emails I delete off one not delete off the other? Is there anyway where I can make this happen?

As James says, make sure that you are using the IMAP servers for your email. You will need to check the help pages for your email provider to get the correct settings in all your devices. POP really doesn't fit the needs of todays mutiple access, always on internet, so you are better off moving to IMAP.

I have 2 photo albums on my iPhone that i want to delete. One is called "Photo Library" the other is called "iPhonePics". I cannot delete any of the photos in either album. How do I delete the photos and/or the albums?

I have 2 photo albums on my iPhone that i want to delete. One is called "Photo Library" the other is called "iPhonePics". I cannot delete any of the photos in either album. How do I delete the photos and/or the albums?

You can uncheck multiple songs by selecting all the songs you want to uncheck, then right-click and choose "uncheck selection". Also, make sure that you have checked "Sync only checked songs and videos" on the Summary tab of your iTunes sync settings or the sync process will ignore your selections.
You can remove all the photos from your camera roll using Preview on your Mac. Connect your phone to your Mac, open Preview, go to File>Import from iPhone. When your photos appear in Preview, select the photos you want to delete, then click on the icon at the bottom showing the red circle with the diagonal line through it (see image below), then click Delete.
To remove photos from the Photo Stream album on your phone you'll have to either reset Photo Stream (deleting all the photos from iCloud) or turn off Photo Stream on your phone.

How to make frieght charges fixed irrespective of the qty

hello sap gurus
how to make frieght charges fixed irrespective of the qty
my client

Hi Deepak,
This is not possible in the standard.
Condition types (with calculation type 'B' "Fixed amount", FRB1 for example) are always posted dependent on the quantity in SAP standard functionality.
The calculation is made as follows:
FRB1 (Fixed amount) = (Condition amount * GR Quantity) / PO Quantity
The problem here is that it is unclear how the posting logic should work especially if you have partial goods receipts or return deliveries.
For example, if you order 10 pieces with 10 GRs of 1 piece each:
should the system now post this condition with the full amount with every GR?
Should it post it only with the first GR?
And how should it be when you create a document to cancel a GR?
So the system always posts with regards to the quantity.
Best regards,
Esther.

How can I get ALL of my Google Calendars to show on the iCal on my iPhone? I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.

https://www.google.com/calendar/iphoneselect

OBIEE - How to make one presentation variable dependent on the other

Similar Messages

Maybe you are looking for