OBIEE Line Missing from Line View

Hi:
OBIEE 11.1.1.6
When creating a line view from two rows of data points, OBIEE will not draw lines between data points when the data points are unbalanced. Here is an example. Let's say product 1 has sales for Jan, Feb, March, April, May and June. And product 2 has sales for only Jan, March, and May. When I create a line view, OBIEE will plot the data points for product 1 and draw a line connecting the data points. But for product 2, OBIEE will show the data points but will not draw a line connecting the data points.
Has anyone seen this before? Any solutions?
Thanks.

Hi Steve,
Please run get-oabvirtualdirectory |fl to ensure the URL (Internal URL and External URL) for OAB has been configured. If the URL is not configured, you can use Set-OABVirtualDirectory command to set the URL for them
Set-OABVirtualDirectory
http://technet.microsoft.com/en-us/library/bb124707.aspx
After that, please restart the computer which has Outlook client installed and test the issue again.
Mike

Similar Messages

Column name missing from a View

I tried to create a view based on another view but the column header is missing from the view.
The view was create with the following statement:
create view TEST.MDQ_VU_TEST2 (FXT_BANKCODE, FXT_FCY, FXT_FXINDICATOR, SUMFXT_FXFCYAMT, SUMFXT_FXLCYAMT, CASESTMT) as
SELECT MDQ_VU_POS.FXT_BANKCODE,
MDQ_VU_POS.FXT_FCY,
MDQ_VU_POS.FXT_FXINDICATOR,
MDQ_VU_POS.SUMFXT_FXFCYAMT,
MDQ_VU_POS.SUMFXT_FXLCYAMT,
ROUND( CASE WHEN (MDQ_VU_POS.CCY_BASE_CURRENCY = '1')
            THEN CASE WHEN (MDQ_VU_POS.SUMFXT_FXFCYAMT = 0)
                      THEN MDQ_VU_POS.SUMFXT_FXFCYAMT
                      ELSE MDQ_VU_POS.SUMFXT_FXLCYAMT / MDQ_VU_POS.SUMFXT_FXFCYAMT
                 END
            WHEN (MDQ_VU_POS.CCY_BASE_CURRENCY <> '1')
            THEN CASE WHEN (MDQ_VU_POS.SUMFXT_FXLCYAMT = 0)
                      THEN MDQ_VU_POS.SUMFXT_FXLCYAMT
                      ELSE MDQ_VU_POS.SUMFXT_FXFCYAMT / MDQ_VU_POS.SUMFXT_FXLCYAMT
                 END
            ELSE 0
       END, MDQ_VU_POS.CCY_FXDECIMAL_PLACES) CASESTMT
FROM TEST.MDQ_VU_POS;The view is created successfully, but the last column name does not appear as show below
View TEST.MDQ_VU_TEST2:
Columns:
    FXT_BANKCODE                    VARCHAR2 (12) INLINE NOT NULL
    FXT_FCY                         VARCHAR2 (3) INLINE NOT NULL
    FXT_FXINDICATOR                 VARCHAR2 (1) INLINE NOT NULL
    SUMFXT_FXFCYAMT                 NUMBER NOT NULL
    SUMFXT_FXLCYAMT                 NUMBER NOT NULL
                                    NUMBER NOT NULLAnyone knows why TimesTen unable to get the alias name for that particular column ?
Thanks is advance.
Regards,
Gary

Thanks Gary - I tried it on 11.2.2.2.0 64bit on Linux x86/64 but it again succeeded for me. That's probably due to my mocked up base table versus your real world definition.
Would you be able to open an SR so we can investigate this properly? We'd need:
ttCapture off the instance (so we get the correct DSN definition)
base table and indexes SQL definition - a ttSchema taken off the datastore would suffice.
Thanks.

Text missing from vertical view- Ibooks Author product

I made a book in ibooks author. In the horizontal view, it looks perfect. In the vertical view, large chunks of text are missing from the book semi at-random. If I attempt to insert the missing chunks of text into the vertical view, then when I switch back over to the horizontal view, I just get repetition where the text shows up twice. That means it is impossible to make the book look good both horizontally & vertically. Any idea how to solve?

Remember, layout in landscape and edit content in portrait.
Check in both.
If you like, you can disable Portrait in the Inspector.
For details on working w/iBA, see the built in Help and
Publishing With iBooks Author
http://shop.oreilly.com/product/0636920025597.do

Image missing from design view

Hi. In DW CS4 on XP.
I have an image that is missing in my design view from DW. It shows up in the live view, but when I select it I cannot get the option to change the image.
I do not want to change the image in the code. It is not loading my new picture under the same filename for some reason.
I have all the visual aids shown except the first 2 listed: CSS layout backgrounds & box models.
I tired selecting all over the table this page is designed in. I cannot seem to select that picture missing. Right now it is a missing link & usually I am able to click the missing link box. I even tried opening it up in DW 8, but I am not even able to select the box, but at least I see it.
Please help if you can.
Thanks.

I would have said "Try renaming the folder containing the images in Rh's Project Manager. That sometimes fixes the problem. You can revert to the old name afterwards."
Keeping all the images, and / or topics, in the root is never a good idea. It can slow things down and it's messy.
You can move the images you can see but obviously you cannot move the others. Try moving a topic that has one of the images to a different folder and see if that refreshes. Also try deleting the CPD file and reopening Rh.
Backup first.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

My mail subfolders are missing from the viewing pane, but available from inbox drop down menu. How do I get them back in the viewpane?

After a restart, all of my mail subfolders are gone from the side view pane. I can pull them down individually from the 'inbox' drop down menu. How do I get them back into the sidebar so I can sort mail out of the inbox?

No anti virus software running as far as I am aware, as in I didn't launch any before reinstating the search email function.
I was running a folder repair function on my inbox (which seemed to complete successfully for the emails in the inbox) when I noticed the majority of the mail folders had disappeared.

Topics missing from link view and topic references

I am using RoboHelp X5 and have come across situations where
I have a URL, and all of the topics that link to it do not display
in link view, in the Show Topics References option, or in the
External Topics report. I want to know if there is an easy way to
correct this so I can see every topic that links to a particular
URL.
For example, I have a link to www.adobe.com that is
referenced in the TOC and 5 different RoboHelp topics. After I
initially set up all the links, all 5 topics show in link view from
www.adobe.com. In topic references, the TOC also appears. Then a
few days or weeks later, I try to view the links again, and some or
all of them no longer appear. If I display the link in link view or
right click and select Topic References, it may only show me the
reference to the TOC. If I remove it from the TOC, it no longer
appears as a URL at all. But it is still actually used in 5 topics.
Also, if I know it is linked from topic A, I could go in and edit
topic A and save. Then www.adobe.com will show up as a link in the
URL list again, and topic A will appear again in link
view/references. But I don't necessary know all of the topics that
link to it, and if I am trying to remove it from the entire
project, or change the URL, that becomes a problem.
I hope this makes sense and if anyone can help, I would
appreciate it!
Chris

Repair the broken links, create a zipped backup of the project, then delete the CPD file before reopening.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Export and Print icons missing from report viewer

I'm currently embedding crystal within a wicket application in which I'm making use of the getHtmlContent() method to retrieve the report's HTML. For whatever reason, I'm not able to get either the export or print icons (on the top left side of the viewer). Is this because I'm using the getHtmlContent() method or do I have something misconfigured somewhere? Setting the setHasExportButton(true) and setHasPrintButton(true) on the report viewer object has no effect.
If I run the same report using the generated JSP outside of my application (within tomcat), I see the export/print buttons. I notice the JSP makes use of the processHttpRequest() method. Any help will be greatly appreciated.
Thanks!
Louis

Hi Louis
- The getHtmlContent() method handles the user's request to generate the HTML for the report and returns the HTML as a String.
Note: Either the getHtmlContent method or the processHttpRequest method can be used to handle the user's request to generate the HTML for the report, depending on how you write your JSP. If the viewer's content is displayed more than once, then the getHtmlContent method is more efficient, because the request is processed once and the resulting HTML string can be used multiple times. In this case, you must set the content type of the HTML, as recommended in the table. Additionally, using getHtmlContent sets setOwnPage to false and disables exporting and printing.
- The setOwnPage(true) and processHttpRequest() method should be used if you want the export and print button to appear in the report viewed through Crystal Report Viewer.
Following is the snippet of code which shows you how to use these 2 methods.
//Get the IReportSource object from sesion and pass it to the viewer
     IReportSource reportSource = (IReportSource)session.getAttribute("reportSource");
Create the viewer and render the report -
     //create the CrystalReportViewer object
     CrystalReportViewer oCrystalReportViewer = new CrystalReportViewer();
     //set the reportsource property of the viewer
     oCrystalReportViewer.setReportSource(reportSource);
     //set viewer attributes
     oCrystalReportViewer.setOwnPage(true);
     oCrystalReportViewer.setOwnForm(true);
     //set the CrystalReportViewer print mode
     //oCrystalReportViewer.setPrintMode(CrPrintMode.ACTIVEX);
     oCrystalReportViewer.setPrintMode(CrPrintMode.PDF);
     //process the report
     oCrystalReportViewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
Hope this helps you .
Thanks
Soni

"This window only" option missing from Show View Options

Hi,
When trying to create a background image for a disk image for distribution, the radio button for "This window only" is missing. I read instructions on the web on how to set the background image, make the file invisible in the Terminal. It will work on the 10.6 system that created it, but will not show on another computer. (Mac OS does not matter)
I eventually had to do this on an old system with Tiger 10.4 . There when looking at View Options, the radio button is there labeled 'This window only' . I created the disk image and voila' it will keep the background image for any other computer.
So my question is - Is there a keyboard combination to set this? This option is missing in 10.5 and 10.6 . This is really frustrating.
TIA

I'm experiencing the same problem. However, I don't think it's defaulting to an arbitrary colour. Rather, it seems to be defaulting to the exact opposite colour (than whatever colour was selected) in the spectrum.
For example, if I set the background colour of a folder to red, it instead defaults to green (and vice versa). This is consistent for all opposing colours.
I hadn't clued into Crayons being different — thanks!
BlackBook Mac OS X (10.4.9) 2GB memory. 120GB hard drive.

After Effects Text missing from project view (yet renders)

I am new to the CC but have played with Adobe in earlier versions (mostly CS3). I have purchased some project files from videoden to give me a starting point (I learn best when playing with something that already works, picking it apart and rebuilding). Only problem is, the text is never visible when I work.
When I open the project it says: "the project must be converted from version 9.0 (windows). The original file will remain unchanged" There are no font dependency issues reported. When I open a text layer I can see a rectangle, but not the letters. I read on the forum that the cache can cause problems. I emptied it, rebooted and started over, still same problem.
So it is the project that is corrupt, right? Wrong. Even when I make my own, add Arial (or some generic font like that all systems have) it wont show up on screen either. And even the project I was having problems with, when I render it the fonts appear properly.
Is there some view that does not show fonts in text areas?
I am running 8gm ram, win 7, Lenovo, with After Effects CC

Show us screenshots of your Timeline panel, Character panel, and Composition panel.

Time missing from clip view

Im trying to edit a video for work and i have already gone through and marked time segments to reject clips from becasue of speaking errors. The issue is that in this new version of iMovie i cant figure out a way to view the clip time so i can easily select that area and reject the time frames that i already have.
Has anyone found a way to bring the clip time HH:MM:SS back into the new iMovie?

Settings > General > Reset > Rest all settings.
This won't effect your data.

Meta Chain is missing from Log view

Dear Experts,
I have a strange problem in Process Chains. In the Planning view a Meta Chain was linked to other one but when I execute the PC and goto the Log view one Meta Chain is missing.
What could be the problem?
Best solution weighs.....
Cheers,

Please check whether the meta chain trigger option is selected or not.i think its happening meta chain trigger option is not selected, so only first chain is running and the subsequent chain doesnt get triggered.thats why in the log view its showing only one chain.
Regards
Prasad

Days missing from list view if no event entered in iCal

if i have no event entered on a particular day, the list view of iCal doesn't display the day. how can i still see the day in list view?

The List view reveals the day/days with an event scheduled only. If there isn't an event scheduled for a particular day, that day will not be shown when using List view.
The List view is a list of scheduled events only.

A lot of characters missing from "Character Viewer" .. can I get them?

Most musical symbols show an empty box.
Other categories too...
Could I've erased them? With CleanMyMac maybe?

Character Viewer isn't doing what I want it to do, can somebody help me?
Here's the issue: I have a font installed called Anastasia, which contains musical symbols. I would like to be able to bring up its whole character set on the screen so I can pick which character to insert in my document. It seems to me that this is what Character Viewer is intended to do; however, I can find no way to view the character set for this particular font, Anastasia. The "Muscial Symbols" collection brings up a limited set of symbols, such as notes, but it's an incomplete set and it does not show Anastasia as one of the available font variations. This font is definitely installed and at least one of my installed apps uses it routinely. But it doesn't seem to be accessible through Character Viewer. What am I doing wrong?
Thanks!

Stop with the right-click answers. Reload is still missing from my View menu.

Please stop with the "right-click" solutions. I don't have a mouse that does a "right-click."
Also, this forum is so hard to use I can't even find my original post so I am starting another one.
How do I get the "reload" function back into my View menu? Please do NOT tell me to "right-click," that is of no use to me.

Hi again pvitari, <br />Sorry you still have problems. Possibly you do not have the option as previously, but you do have workable options to reload webpages using mouse clicks.
*Please confirm or explain ?
<img src="https://support.cdn.mozilla.net/media/uploads/gallery/images/2012-01-03-13-00-12-3d6b4e.png">
*Do you not have a curved blue arrow on the end of the address bar as shown in the above image ?
Your icons may not look exactly like that and will possibly depend on any customising you may have done. The arrow is only available when appropriate and could be: a cross to stop loading, or an arrow to navigate to a site.
See the article
*[[Customize navigation buttons like back, home, bookmarks and reload]]
#Do you have the curved blue arrow that you are able to click with a mouse to reload your webpage ?
#Does F5 work to reload ?
*Possibly if you attach a screenshot it will help us understand what you see <br /> [[How do I create a screenshot of my problem?]] <br /> [[How to make screenshots]]

Re: Smart Albums View Keyword option is missing from the view option How can it be turned on?

How can I use the keyword option in the view menu for my smart albums?

You do not use the view menu - you create a new smart album (or edit and existign one) and use the Keyword criteria as yoou wish
LN

Import and Backup button missing from "library" view, I am trying to import hmtl bookmarks

I have just clean installed latest Ubuntu 11.04 which comes with firefox 4.
I have old bookmarks from previous install I want to import.
When I click on Bookmarks - Show all Bookmarks, the Import and Backup button does not show.
How can I import my saved bookmarks?

You may need to look a bit higher to the Ubuntu menu bar.
You can also try to disable the Ubuntu Firefox Modifications extension.

OBIEE Line Missing from Line View

Similar Messages

Maybe you are looking for