OBIEE Pre-Builts Loading one year at a time

Hi,
We are in a situation where we need to load one year at a time into the BAW (warehouse). I have seen this done before where the initial load was a full load and only went forward one year. Each subsequent load was for a complete year until we were current. After that, it was simply incremental loads with the standard prune days of 30.
Does anyone have any detail as to how to do this?
Regards

Is the issue a performance issue (ETLs running for too long)? The problem is that if you do Year by year..and you want to do a "incremental" load for each year, that would be even more of a load..since you are not allowing for BULK load (where the tables get truncated). Either you can truncate and do BULK or incrmental..which may be an even heavier load. I think you are assuming that this approach will somehow help you from a hardware limitation standpoint..do you know for sure that it will?
If you really do want to do it, as I mentioned, you can edit the INITIAL and END parameters. It would help if you clarify the Hardware limitation...I think there are better ways to handle this than to do what you are doing.

Similar Messages

Loading data one year at a time

Hi,
We have a situation where we need to load data one year at a time. I saw this done a few years ago but do not remember the details.
What I am thinking is that we could initially run a full load with the following parameters:
$$ANALYSIS_START: 1/1/2006
$$ANALYSIS_START_WID: 1/1/2006
$$INITIAL_EXTRACT_DATE: 1/1/2006
$$ANALYSIS_END_WID: 1/1/2006
And this should give us one year. What I am not sure about is how to load each subsequent year???
Regards

Is the issue a performance issue (ETLs running for too long)? The problem is that if you do Year by year..and you want to do a "incremental" load for each year, that would be even more of a load..since you are not allowing for BULK load (where the tables get truncated). Either you can truncate and do BULK or incrmental..which may be an even heavier load. I think you are assuming that this approach will somehow help you from a hardware limitation standpoint..do you know for sure that it will?
If you really do want to do it, as I mentioned, you can edit the INITIAL and END parameters. It would help if you clarify the Hardware limitation...I think there are better ways to handle this than to do what you are doing.

Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

Hi, Tom.
FYI: You've not stated which of your listed Macs is having the problem. However, the following may help in any case:
1. Did you install Front Row using the Front Row hack on a Mac that did not ship from the factory with Front Row installed? If so, See my "Uninstalling the Front Row hack" FAQ. This has been known to cause a variety of problems, including the menu bar (Clock, Spotlight) issues you noted.
2. If you did not install the Front Row Hack, an incompatible or corrupted Startup or Login Item may be partly to blame for the problems with the menu bar. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
3. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
4. Re: Safari and Mail, if not sorted by any of the above, see also:• "Safari: Blank icon after installing Security Update 2006-002 v1.0."
• My my "Multiple applications quit unexpectedly or fail to launch" FAQ
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Can FDM handle more than one year at a time?

Hi,
I'm trying to load a multi-load file through FDM with the target being an Essbase cube and the source being a text file. The file is for 36 months which crosses 3 years. The problem is Oracle support is saying FDM can only handle one calendar year at a time and we need to load 3 separate files.
The file imports and validates ok. And the export only pushes data to the first year '2010' but it doesn't error out.
Any ideas?

If you use an excel file as the source, you can load all 36 periods.
You can also modify the adaptor to support this action but I would caution you that doing so will cause support to no longer support your application without requiring you to import a non customized adaptor. This also has consequences for when upgrading.
Let me add, FDM support is the best in the business. I have never had a situation where what they told me was incorrect. What you are trying to accomplish would be a custom solution that should be implemented by an experienced FDM resource that understands the impact of the customization.
Edited by: TonyScalese on May 6, 2010 3:10 PM

Add one year to date/time field

Hi All.
In my form I have date/time field DATE with format MM/DD/YYYY. Add I would like when user selected according date in that field, the other field should display date on one year late then user selected in field DATE. I mean. If user install 8/27/2010 on DATE field in other field will display date 8/27/2011.
Thanks.

Hi Paul,
Thanks for replay. In your example you used CLICK event. Is it possible to get date on other field without click button? For instance, if user just press TAB key on keyboard.
Thanks.

Can I purchase Creative Cloud subscriptions for longer than one year at a time?

I work in the design department of a large business, currently using Creative Suite 6 (Design Standard edition, which includes PS and AI).
I'd like to get the some of the new CC features, but my manager won't commit to a turnkey month-to-month or even annual rental of Creative Cloud apps (it's a pain for our department's purchaser to have to do orders more than once a year). That said, if they could take care of, say, two years at once, I might get the software. Is this an option? I'm one of only a few folks who use Adobe software (it's not a design business; we're just part of a small design department, and all software purchases need to go through this person, after which they're reimbursed). I'm not interested in any of the extra storage or central administration options that come with the higher priced business subscription.
Thanks!

http://www.adobe.com/au/products/creativecloud/faq.html
Are there any unique benefits that come with my paid membership?
Yes, as a member of Creative Cloud, you get many benefits that you do not get when you purchase a traditional shrinkwrapped product:
Access to both the Mac OS and Windows® versions of the desktop applications and the ability to install them on your primary computer and one backup computer. So, if you have a Mac at home and a PC at work, you can install your applications on both as long as they are not running at the same time. See the product license agreements page for more information.

Load one tab at a time

can it done that when i open several pages in new tabs at once firefox will load them one at a time and one after another. And that way it will finish loading them all???

Some extensions that you can look at:
* BarTab: https://addons.mozilla.org/firefox/addon/bartab/
* Load Tabs Progressively: https://addons.mozilla.org/firefox/addon/load-tabs-progressively/
* Reload Tabs Progressively: https://addons.mozilla.org/firefox/addon/reload-tabs-progressively/
* Restore Control: https://addons.mozilla.org/firefox/addon/restore-control/

How can I load one photo at a time from Documents into the Firefox Photo Album. Using Vista ome Basic

I really cannot see exactly where to start

select the head with one of Photoshop's selection tools
When doing this, I find it quite helpful to create an intermediate image with a transparent background that contains only the head to be pasted into the second image. First I paste the head onto this transparent background, scale it, rotate it or skew it to make it fit into the other image, adjust the lighting, then select it.
To be able to paste the head seemlessly into the second image (and without aliasing effects), I make the border of the selection soft (⌥⌘D); my Photoshop has a german interface, so I am not sure about the english localization, this command must be something like "selection -> modify selection -> soft border".
I would not bother to get the lighting and color excactly right in Photoshop, that is far easier with the "dodge" and "burn" brushes and color adjustments in Aperture.
To do this completely in Aperture, you would have first to combine both images into one (for example by creating a book page), then use the retouche->clone tool to stamp the head from one image to the other. I use this occasionally to stamp a face into a flower bud or for similar effects. However, for this to work you need a plain background and nearly circular shapes to be pasted.
Léonie

Firefox 15.0.1 runs so slow on Mac OS 10.7.4, Why? I am only able to load one tab at a time, and usually end of using Safari which I like more and more. Any hel

This has really gotten back since I update to 15.0.1. I can't even get some sites to load. I have added nothing else. I don't have spyware, or any other similar programs.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Is it possible to load One Track at a time to ipad??

Is it possible? -- It seems to only want to load EVERYTHING in my itunes. Somewhere it says something about chekcing things.... but they are all checked alreadt and when I uncheck they dissappear... ?? Very important, thanks.

You can, see the 'syncing manually' section on this page : http://support.apple.com/kb/HT1351

I did the Acrobat Standard subscription (one-year), and each time I try to open a PDF file, I get the "provide a serial number." What am I to do?

I did the subscription 3 days ago and got an order number confirmation...but I can't open any PDF files on my computer. If there is something I am supposed to download...I can't find the link anywhere.

Uninstall Reader. Use the Microsoft Installer Cleanup Tool. They try re-installing Reader 9.2

Loading One Game Level At a Time

HI,
I have seen in some games where instead of loading the whole game at the beginning of the game, they load one level, with the preloader on the screen, then when that level is over, another level is loaded, with the preloader on the screen, etc. I've been trying to find a tutorial or some information on how to do this online but couldn't find anything. I have a game that takes a long time to load when loading it all at the beginning of the game, so I'd like to load it level by level. Can anyone tell me how to do this, or where I could find info. on how to do this? Thanks a lot...

Getting all into one SWF is the opposite of what you're trying to do.
If you have everything in one SWF then it loads the entire thing when the game is loaded.
If you want it to load one level at a time using seperate SWF's it will only load the main game at the start and other levels when requested.

Loading the pre-built Oracle_BI_DW_Base repository

Hello everyone:
One step in the OBIEE Applications installations guide is to load the pre-built Oracle_BI_DW_Base. I don´t understand why do i have to do this?
I´m kind of newbie with OBIEE App, i ´d really appreciate the help
Cheers.

See Just Need BI APPS for an Apresentation...!!!
No data = no reports. You can't report off of nothing...well ok, you can but it won't make a whole lot of sense. I.e. none.
Cheers,
C.

Does OBIEE come with pre-built ETL for EnterpriseOne?

Hi All,
I'm currently trying to integrate OBIEE with EnterpriseOne and was wondering if there are any pre-built ETL for EnterpriseOne. Does OBIEE come ship with any pre-built EnterpriseOne dashboards, if so where can I find these. Thanks for the guidance.

Hi,
OBIEE doesn't comes with pre-built ETLs. Its BI Applications which have pre-built ETLs to build OBAW. But one need to install these BI Applications on top of OBIEE.
Hope this clarified your doubt.
Thanks,

What products have with my one year's pre-paid subscription?

Hi,
Very confusing and not very clear on what I products I actually have for my one year Creative Cloud Photography subscription.
Have I missed something during the purchasing procedure?
I had issues with loading Photoshop CC 2014, which are now solved. However, when I go to use Lightroom 5, it leads me to believe that I only have a trial copy with an initial number of 20 days, then it looks I will have to purchase it.
Have I actually got Lightroom 5 with my package?
Could you advise please?
My order number was AD002313761 UK
Regards
-Keith Abnett-

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

OBIEE Pre-Builts Loading one year at a time

Similar Messages

Maybe you are looking for