OBIEE reports from qa to prod

Hi,
can anyone pls tell me the steps to move reports from qa to production??
Thanks in advance!

Hi,
You can move your reports from qa to prod, just go to your qa (C:\OracleBI\xmlp\XMLP) location and from there copy the reports folder and again paste to your prod one in same location (C:\OracleBI\xmlp\XMLP).
Regards,
Omid

Similar Messages

  • How to call an OBIEE report from EBS

    Hi,
    I'm trying to call an OBIEE report from an EBS menu.
    I have setup the following form function calling SSWA jsp type function
    Web HTML
    OracleOasis.jsp?mode=OBIEE&function=Go&Path=/shared/APA%20Real%20Time/AR/AR02%20Revenue%20by%20Account%20Report&Action=Prompt
    When I click the menu item OBIEE returns the following;
    No Columns
    The request cannot be performed because it contains no columns.
    Can anyone please enlighten me on how to do this correctly
    Thanks
    Phil
    Edited by: user462334 on 28/07/2010 21:50

    Hi Phil,
    I did some further investigation. The syntax to your Oracle BI Answers should be as follows;
    OracleOasis.jsp?mode=OBIEE&function=Go&parameters=Path~/shared/APA%20Real%20Time/AR/AR02%20Revenue%20by%20Account%20Report
    Check the following for more details;
    http://obibb.wordpress.com/2010/08/05/integrating-oracle-ebs-and-oracle-bi-ee-links/
    Cheers
    Daan Bakboord
    http://obibb.wordpress.com/

  • Open OBIEE report from web application

    Experts, I want to open OBIEE report from a web application. I have a question regarding the security here. Say I login as 'USER1' in web application, I would have to pass 'USER1' in nquser parameter. Correct? Also, this report has access to 'Sales Group' users only. So, does 'USER1' in web application need to be assigned to 'Sales Group'? Or, any user in the web application can open this report as long as I pass nquser in the GOURL.
    thx,
    parag

    You don't need to specify group details.
    When the report hits OBIEE, it will determine the permissions based on the nquser.
    Hope it helps.

  • OBIEE: REPORT FROM 2 FACTS WITH ONE SHARED AND ONE UNSHARED DIM; POSSIBLE??

    Hi All,
    We have a typical scenario to build a report from 2 subject areas(ideally from 2 facts)
    Here is the Scenario: Creating a report which based on two facts(2 Subject Area's) and one common dimension and one unshared dimension.
    Example
    ======
    Dimension Date is common between Fact Transaction and Fact Credits.
    Dimension Credit Type is applicable only for Fact Credit.
    We have to build a report with the below mentioned attributes/metrics
    Dim Date. Attribute (*Common Dimension*)
    Fact.Transaction.Metric
    Fact. Credit .Metric
    Dim.Credit Type. Attribute (*Unshared Dimension*)
    Is this is possible in OBIEE..?
    Thanks,
    Govardhana

    Yes, you must use measure levels. Set the column level of each measure from the Transaction Fact to Total for the Credit Type dim.

  • OBIEE report from multiple facts at different levels

    Currently we need to develop a report with columns from 3 different facts surrounded with conformed and non conformed dimensions at different levels.
    After setting the hierarchial levels and putting the facts into single logical table with different sources OBIEE is generating 2 different queries and does a full outer join.
    I would like to know how we can do a left outer join instead of full outer join between the 2 queries based on a common column?
    Thanks in advance.

    Hi Vinod,
    The scenario provided in the link above doesnt match to my issue.
    We need to develop a report from multiple fact tables at different levels with conformed & non conformed dimension columns.
    I have 7 dimensions D1, D2, D3, D4, D5, D6 and D7 & two fact F1 and F2 tables.
    F1 is tied to dimensions D1,D2,D3,D4,d5
    F2 is tied to dimensions D3,D4,D5, D6 and D7.
    In my report I have columns from D1, D2, D3, D4, D5, D6, D7, F1 and F2.
    So OBIEE generates 2 queries with columns from D1,D2,D3,D4,d5 & F1 measure and another query with D3,D4,D5, D6, D7 and F2 measure.
    and then does a cross fact join out of box between 2 queries.
    But I need to do a left outer join between the 2 queries on a common column instead of cross fact join. I would like to know how we can achive this.
    Thanks.

  • Accessing OBIEE report  from mobile browser or tablet

    HI
    jdev 11.1.1.5
    we have OBIEE reports embeded in adf jspx page .
    can we access this report from mobile browser or tablet ?
    I think we can access OBIEE report using OBIEE client application for Iphone.
    but is it possible to access the same from mobile browser?(embeded in adf application)

    chk this
    http://blogs.forrester.com/boris_evelson/10-07-07-oracle_obiee_11g_launch_we_are_back
    Mobile BI apps delivered to iPhone/iPad, BlackBerry, Android and Windows Mobile devices

  • How to use the repository; uploading reports from DEV to PROD...

    Hello...
    I'm fairly new to CR-XIr2 (SP3) but have worked with Crystal Reports since v6.0.  I'm trying to figure out how to create a dynamic parameter list that someone can select an item from, which will get sent as an input parameter to the SQL Server 2005 stored proc that populates the report.  I'm also trying to figure out if there's an easy way to copy reports from a DEV environment into PROD.  We have BOE.
    Basically, I would like to find out resources online or in books on how to use the BOE repository for dynamic and/or cascading parameters (i.e. pulling a list of text values & their associated IDs from a lookup table that won't be used in the report), images (i.e. corporate logo), etc..  What complicates things for us is that IT is now requiring us to use a DEV environmentit was really easy when we had unlimited access in PROD!  We also need to put together a process where reports & other repository objects that are copied from DEV to PROD access the correct db, etc.  (Crystal Report in DEV accesses DEV db/repository/etc.when copied to PROD it accesses PROD db/repository/etc.)
    Anyway, I'm just looking for info on where to begin--whether it be a book, a BO/SAP knowledge base article, in-class training from a specific company, etc.  Thanks!

    Hey Markian,
    Can you let me know the process you have followed to migrate from Dev to Prod.
    We can migrate all the reports and objects and database fields through migrate wizard where you can import all the objects, reports and database fields and users to production enterprise.
    Just follow the above scenario and let us know if you are facing any error.
    Try  publish the reports using import wizard and run it in the crystal designer.
    Regards,
    Naveen.

  • Security Issue while calling a OBIEE report from SOAP UI

    I created a sample report in OBIEE and am trying to run the report from SOAP UI
    I am using the ReportService WSDL and runReport operation for the same.
    I am getting following error  failed: due to java.lang.SecurityException: Security violation: ~weblogic/Drafts/test.xdo, user: weblogic, permission: 0<
    The user weblogic is the default use and i have assigned all the groups.
    Again in application roles under the Application Strip in Obi i have assigned user weblogic to all the roles.
    Still i am not able to call this web service and is failing with the above mentioned message.
    Am i missing anything?

    Just in case the error message might help you to identify the issue.
    <soapenv:Fault>
             <faultcode>soapenv:Server.userException</faultcode>
             <faultstring>oracle.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport for reportAbsolutePath [~weblogic/_temp/Salary Report.xdo] failed: due to java.lang.SecurityException: Security violation: ~weblogic/_temp/Salary Report.xdo, user: weblogic, permission: 0</faultstring>
             <detail>
                <oracle.xdo.webservice.exception.OperationFailedException/>
                <ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">MachineName</ns1:hostname>
             </detail>
          </soapenv:Fault>

  • How to migrate xml report from test to prod?

    Hi,
    We are using BIP 10.1.3.2 standalone. I've one simple question for migrating report from test enviornment to production.
    Is there any standard method for migration?
    Like in Discoverer we can simply export report and import it in prod environment.
    Thanks...

    Thanks for your reply. That's one describes for EBS version of BIP. I'm looking for standalone version of BIP enterprise.

  • OBIEE Reporting from  CUBE

    Hi,
    I am Creating a Report from a cube,I have Few Calculated Columns so i have Used Combined Similar Request.I get the below Error:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Syntax error in input MDX query on line 7 at token 'filter' (HY000)
    I wont getting this Error If I add Filters to Individual Subject Area's but the Values I get will be Wrong.I am Calculation Direct Margin (Total-Cash Expense) etc...Any Work around ???

    just in case check this http://oraclebizint.wordpress.com/2008/04/28/oracle-bi-ee-101332-handling-sort-order-in-hyperion-essbase-931-evaluate-and-mdx/

  • Transport WEBI report from QA to PROD

    Hello expert,
             I create a webi report in QA,  how can I transport this webi into production, do I have to create the same webi report in production, or  I have some approach to change the datasource for this QA webi report ?
    Many Thanks,

    Hi!
    look at the LCM
    http://www.sdn.sap.com/irj/boc/index?rid=/webcontent/uuid/1064e133-ae9c-2b10-c3a7-fb7b1a313dfb [original link is broken]

  • Migration of Web Analysis Report thru LCM (from QA to Prod )

    Hi All,
    When we tried to migrate Web Analyasis Report from QA to Prod using LCM, Security is wiping out in Prod after migration of that WA Report. Can anyone suggest how to retain the security of report after migration in Prod environment.
    thanks in advance

    Hi Vijay,
    I have checked migration utility inversion 9.x basically this migration utility is compatible for reports from version 7.x to 9.x and it is not supported for reports from 9.x to 11.x ....
    So i have finally fallowed a procedure.
    I have exported the reports from 9.x and imported in 11.x .
    Then after exporting i have pointed database connections to new 11.x version server.
    Now I was facing a issue when i open a reports in read only mode (i.e as a business user) iam getting a screen where it asks for database details ( I have assigned business user read access to essbase)
    Basically this reports are pointing to my old essbase server i.e version 9.x server.
    Please let me if iam missing something while exporting and importing reports.
    Thanks,
    Ram.

  • Catalog Migration from Dev to Prod

    Hello,
    Certain users of our system are unable to login to OBIEE after we migrate to Prod. Getting the below error
    access denied for user to path /users/*USERNAME*/_portal/dashboard layout
    USERNAME is the userid used to login to obiee
    In our Prod, Users have access to Answers and hence they save their reports under My Folders.
    While we migrate the new set of dashboards and reports from Dev to prod, we overwrite the System, System.atr, Shared, Shared.atr files of Prod with the corresponding files from Dev. Thus retaining the Users and Users.atr files of Prod.
    Security: All are users/pwd are stored in the RPD
    Is there something wrong with the migration procedure or is it a bug?
    Any help would be appreciated.
    Thanks,
    Joe

    +2) Why did you migrate the "System, System.atr" ? Try without this one, but just the "shared" folders and files.+
    System, System.atr are migrated since this folder stores the Privileges and data formatting etc. These configurations need to be migrated to prod as well.
    However I tried what you suggested and USERNAME is able to login and see the dashboards. But the Privileges and data formatting changes in Dev didnt get into Prod
    There is a Security folder under System. Do you know what it is used for. Should I try to retain this folder in Prod?I don't really know.
    The object permissions (like report permissions) are supposed to be in ATR file (i think so...), but there are other permissions and security things everywhere.
    But i appears to be a clue to solve your problem.
    +3) Do you have a backup of the previous Prod webcatalog ? If so, try to copy the USERNAME/_portal content into the new one.+
    This might work, but I really need to identify what is the root cause for this since we have migrations bi-weekly and this issue might pop-up again for a different userOf course. I just suggested that to see if if the /username/_portal were really different, despite you didn't upgrade them.

  • Linking to an OBIEE report without showing the user and password

    Hi!
    we are trying to access to an obiee report from an external portal (coded with php).
    The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
    http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
    But this url is expossing OBIEE's user and password.
    In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
    The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
    I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
    but we couldn't use this aproach due to security issues.
    Thanks!
    Nuria

    Hi!
    We have finally done this (and it works!)
    <?php
    $urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
    $ch = curl_init($urlInforme);
    $ckfile = tempnam ("./", "CURLCOOKIE");
    $ch = curl_init ($urlInforme);
    curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
    curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
    $output = curl_exec ($ch);
    $ch = curl_init ($urlInforme);
    curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
    curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
    $fp = fopen("salida.pdf", "w");
    curl_setopt($ch, CURLOPT_FILE, $fp);
    $output = curl_exec ($ch);
    curl_close($ch);
    fclose($fp);

  • Copying a report from one environment to another

    Hi,
    I need to copy a report from QA to PROD. I saved the report in local drive from Desktop, connected to PROD and then tried to open the it in PROD. But I am getting an error message from "Visual C++" saying "Abnormal Program Termination".
    I am using Discoverer 10g Rel 1.
    Have anyone experienced this error ?
    Please help.
    Yogini

    Hi,
    Thanks for the reply. I found that the business area was missing a join as compared to the QA business area. After adding the join, it is not giving me any errors, but returns no data.
    The query returns data in Toad. -- So I have access to the database views
    I am not getting any errors in Discoverer -- so I have access to the folders too.
    I confirmed that the folder is shared with the proper responsibility.
    Still I dont see any data.
    Any idea/suggestions are appreciated.
    Yogini

Maybe you are looking for