Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in versn D.

Hi friends ,
I am getting below error while doing the BI Content Activation.Please guide me for possible solution :this is for two three infoobjects.Do in need to reconfigure the system??
Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version
'D'
    Message no. RSO252
Diagnosis
    You wanted to generate an object with the name '0DB87SIC1' (in transport
    request IOBJ) of type 'InfoObject' (TLOGO). This is, however, not
    available in the BW Repository database. It does not exist in the
    requested version D. If the version is 'D' then it is possible that an
    error arose during the delivery or installation. If the version is 'A'
    then the Object was either not created or not activated.
System Response
    The object was not taken into account in the next stage of processing.

hi,
This is not an error but while installing bunch of infoobjects, it will say which one of them it doesnot have in the system could be the problem in patches.Could be very old.
Hence better you create a infobject equivalent of the object you require and use it and goahead.
Thanks
Kumar

Similar Messages

  • Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

    Hi Gurus,
    Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
    The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
    The process chain contains processes for:
    - starting the process chain
    - executing infopackage (for loading data to 0figl_o10),
    - ACR (activate data in 0figl_o10)
    - delete index 0figl_c10
    - DTP loading data from 0figl_o14 to 0figl_c10    
    - executing infopackage 80FIGL_O10
    - creating index in 0figl_c10
    - building DB statistics
    - rolling up aggregates in 0figl_c10
    - deleting of requests from the changelog 0figl_o10
    - deleting of requests from PSA (0fi_gl_10)
    How to find what cause that error.
    Regards,
    Leszek

    Hi,
    A SAP consultant told me to ignore that error. 
    Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
    The problem is described in sap note: 883745.
    Regards, Leszek  

  • Object '485V83KBEXPI7' (ROUT) of type 'Routine' is not avble in D Version

    Hi,
    when i am installing BI Content Activation for InfoObject catalog 0MMPUR_CHA0,
    InfoObject catalog remains Inactive and showing below error.
    Object '485V83KBEXPI7VUNBAQ0D9UCR' (ROUT) of type 'Routine' is not available in version 'D'
    Message no. RSO252
    Diagnosis
    You wanted to generate an object with the name '485V83KBEXPI7VUNBAQ0D9UCR' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    System Response
    The object was not taken into account in the next stage of processing.

    If you see so, then Goto BI Content in RSA1. Select Object Types>>> Infooject Catalog>> type ur Object name there. and transfer selections. When this object will come on ur rght panel, u can see it is in 3.5 version. Now click install now. this will get it in your rsa1 Modeling section. Then go there and say 'Migrate'.
    Hope this helps.

  • Unable to Transport Querys Object (ELEM) of type 'Query' is not available in version 'A'

    Hi,
    We need to transport some querys from production BW 7.3.1SP7 to synch with Dev.  I know, I know but had no choice but to created querys in PBW due to no data in DEV...
    In RSA1, we collect query and get errors for every object (ckf,rkf, vars etc) and when changing dsiplay from hiearchy to list, there are no objects included under the query element. 
    Opened the system in SCC4 for automatic recording of changes and changes to repository and cross clinet customization allowed and changed the client role to Test.
    Tried opening and resaving the query in query designer.
    Query is active in table RSRREPDIR
    Checked SCN and OSS have yet to find a solution
    http://scn.sap.com/thread/1758171
    http://scn.sap.com/thread/1623756
    Here are the error details
    Object '4T3M5JI7050ENPG6G336XWYNK' (ELEM) of type 'Query' is not available in version 'A'
    Message no. RSO252
    Diagnosis
    You wanted to generate an object with the name '4T3M5JI7050ENPG6G336XWYNK' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    System Response
    The object was not taken into account in the next stage of processing.
    Thank you so much for your time!
    Lee Lewis

    This is an SAP BUG which is corrected by this note:
    > 1762785 - Object '!XYZ...' (ELEM) of type Query is not available.
    > 1816332 - Object 'XYZ...' (ELEM) cannot be collected (RSO296)
    Lee Lewis

  • Object 'AJS9H7GM38PGOU5HYFHLSBTTB' (ROUT) of type 'Routine' is not availabl

    Hi,
    I have a query in BI which shows the following error after dropping the same in Transport Connection bar in R.H.S panel.
    Object 'AJS9H7GM38PGOU5HYFHLSBTTB' (ROUT) of type 'Routine' is not available in version 'A
    Object 'AHNJBVI0PUYSJNYXQRS2Y06NJ' (ROUT) of type 'Routine' is not available in version 'A
    Object '8ASNUKY1YQJZ8B85VEJPS1DPR' (ROUT) of type 'Routine' is not available in version 'A
    Object '88NXP8ZGLCTB351LNQU6XPQJZ' (ROUT) of type 'Routine' is not available in version 'A
    But after collecting the query and query elements, I can see the afore mentioned 4 query elements are not getting collected under the transport req but the Req itself shows the status GREEN (after collection).
    After releasing the req when I am trying to move it to PRD, the system is throwing error. I am unable to import the query in PRD.
    Now can any one suggest me for the next step.
    Also I want to know how and where I can search for those elements in BI system?
    Thanks in advance.
    Edited by: Ajanta Dutta on Jul 20, 2010 2:50 PM

    Hi,
    I will answer your questions one by one.
    During the initial transport, system was showing that: there are few elements which has been locked by other TR Request. I unlocked the task and the request using SE03 and then again tried to collect the query and query elements in a new TR Request. I have checked option Only Necessary Objects in Grouping, Collection mode: collect automatically, Display: Hierarchy
    But I cannot find those 4 query elements under query elements list. System is unable to collect those 4 query elements under the TR Request. These 4 elements are of type ROUTINE and not in Active version, as you can see from the message itself.
    Rest query elements are getting collected under the TR Request. Only those 4 query elements are missing. Now pls suggest me how to proceed. How and where can I find those query elements (Routines)? Coz the tech name for those query elements are specific to query itself. I have no idea where to search for those 4 elements.
    Object 'AJS9H7GM38PGOU5HYFHLSBTTB' (ROUT) of type 'Routine' is not available in version 'A
    Object 'AHNJBVI0PUYSJNYXQRS2Y06NJ' (ROUT) of type 'Routine' is not available in version 'A
    Object '8ASNUKY1YQJZ8B85VEJPS1DPR' (ROUT) of type 'Routine' is not available in version 'A
    Object '88NXP8ZGLCTB351LNQU6XPQJZ' (ROUT) of type 'Routine' is not available in version 'A
    Thank you.
    Edited by: Ajanta Dutta on Jul 21, 2010 9:18 AM
    Edited by: Ajanta Dutta on Jul 21, 2010 9:21 AM

  • Object '43TH...' (ROUT) of type 'Routine' is not available in version 'A'

    Hello all,
    I having this situation, first let me tell you that we have transported the queries from dev to qa and then we had to open the qa system to modify our queries. There were a lot of modifications done to the queries in QA and so now I am trying to transport the queries back to Dev so that we can transport it again via normal route.
    When I am trying to collect the query in QA I am getting a lot of errors something like this:
    <b>Object '43TH...' (ROUT) of type 'Routine' is not available in version 'A'</b>
    You wanted to generate an object with the name '43TH...' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    <b>Object '43TH...' (RSFO) of type 'BW Formula' is not available in version 'A'</b>
    You wanted to generate an object with the name '43TH..' (in transport request RSFO) of type 'BW Formula' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    Can someone tell me why is it erroring out and where can I look to fix it.
    Thanks,
    Raj

    Raj,  
        Can you please check the formula you mentioned in the Table RSZCALC Table, Provide ELTUID = "43TH...". check the Version whether it is 'A' or 'D'.
    If it is not available in 'A' Version, then check the Formula creation.
    Probably, it may help you.
    Regards,
    Nagesh Ganisetti.
    Assign points if it helps.

  • The currency translation type 0MEANDAILY is not available in the system

    While executing certain queries for CRM Sales I am getting this error "The currency translation type 0MEANDAILY is not available in the system" I have looked and haven't found this info object in the Business content.
    Any help?
    Thanks
    Arunava

    Dinesh,
       If I do a transfer Global setting from RSA1 on my CRM system  there are four to choose from
      1> Currency
      2> unit of measurement
      3> Fiscal year variant
      4> Factory calander
      Which should be chosen..?? for the 0MEANDAILY . From Anurag's post it's evident that this is a part of the BC and being an info object it's not populated by transferring Global data. Please explain
    Anurag,
      Can you please be a little more specific .. I am in the rsa1--> bc    Then what.. How do I search? I searched against the infoobjects and this is not available
    Thanks
    Aruava

  • Currency translation type 0CMCALDAY is not available in the system

    Hi,
    When I run the query, I am getting following error message
    "Abort the currency translation type 0CMCALDAY is not available in the system"
    I couldn't find 0cmcalday object in BC too. How can I install in this obj in BW??
    Thanks,
    SK

    Problem solved
    It is located under Currency Conversion types, in the BC

  • WARNING: Type 'SByte' is not available in the public API. Onyx development?

    Hello i'm getting the warning WARNING: Type 'SByte' is not available in the public API.
    and various other warnings.The problem is that i don't see any code.
    Any thoughts?BTW is onyx still under development?
    ps:I know that nobody is going to reply so i wonder why i keep asking.

    The vSphere client uses some hidden API's. If you perform an action in the vSphere client that uses a hidden API, Onyx will report the "WARNING: Type 'xxx' is not available in the public API." message. This unfortunately limits what you can do with PowerCLI. Some know hidden API's are for tags, cluster EVC mode and for Storage Profiles.
    I don't know if Onyx is still under development. Maybe some from VMware can answer this question?

  • With PS 7  create new  Place two objects on the new file  then you may cut copy and paste Cs2  create new  place two object on the new file Cut is not available how does one cut and paste in new file

    With PS 7
    create new
    Place two objects on the new file
    then you may cut copy and paste
    Cs2
    create new
    place two object on the new file
    Cut is not available how does one cut and paste in new file

    If your using File>Place then photoshop cs2 creates what's known as Smart Objects, which photoshop 7 didn't have.
    In photoshop cs2 you can rasterize the smart objects and that should make the Cut function available.
    Select both placed layers, right click on the area to the right of the tumbnail and select Rasterize Layers.
    If in photoshop cs2 you to Help>Photoshop Help and look under Layers>Smart Objects, that should give you a good overview of what smart objects are.

  • Condition type VPRS  is not available in ke24

    Dear Experts,
    My clients wants to analyze cogs in transaction code ke24. I can see a overview of stratification costs, however the cogs value is not available. I made the assignment between condition type(VPRS) and value field in KE4I. but it didn't work. May you help me??
    Thanks
    Marcel

    HI Marcel,
    Please check KE4W if the value field is reset here. Also please check note 20254 which explains which value should be transfered to CO-PA from SD.
    Regards.
    Abhisek

  • New InfoObject is not available in the report in the QA system

    hai
    i transported one report to QA system .
    then i changed <b>one InfoObejct</b> in the InfoCube & report in the DEVB. Then i transported that report & infocube to the QA system.
    But when i try to open the report in the QA system then it says that new InfoObject is not avialable in the report in QA system .
    So pls tell me wt i have to do .....
    i ll assing the points
    rizwan

    hai
    I included in the new InfoObject in the master data infoObject . And this master data infoobject is avialble in the InfoCube .
    This InfoCube also transported to UBW also. Even though im not getting this InfoObject in the report in the UBW report.
    So tell me wht i have to do ...
    Rizwan

  • Using 'Calendar' control type in prompt - not available

    Hi All,
    I am trying to setup a simple from and to date prompt that can be used in my reports to set the to and from date range for filtering the fact data that is returned. Following a number of blogs and articles on this it seems pretty straightforward. I have setup two static presentation variables on the rpd (startdate and enddate respectively) and I have started to create the prompt in answers that will be used by a number of different reports.
    My issue is that, all the articles I have seen indicate the use of the 'Calendar' control type when setting up the prompt. I however only have the following control type options for the prompt *(Edit Box, Drop Down List, Multi-Select)*. I do not see Calendar. Does this need to be initialized in any way to make it available .. ie move the calendar.js file somewhere so I can use the calendar control?
    example instructions: http://obiee101.blogspot.com/2009/03/obiee-between-dates-prompt.html
    Thanks,
    K

    Figured it out. The fields I was using in the prompts were character fields representing dates 'YYYY-MM-DD'. In order for the Calendar control option to become visible the fields selected as part of the prompts need to be of date or timestamp data type.
    Thanks,
    K
    Edited by: user_K on Apr 20, 2010 12:47 PM

  • !!URGENT!! Type Pool DMUT not available in 45B

    Dears,
    Please can you suggest a solution for this. The type- pool/group DMUT does not exist in SAP version 45B. I want to use a FM ( coded in v5.0) which uses this type-pool.
    Is there any other type-pool/group which could be used as an alternative in older versions of SAP.

    If this is a standard function module, this may not exist in earleir version. Are you plannign to copy this from 5.0?
    In this case create the type pool along with the function module.

  • Proxy object from "Enterprise Service" in SE80 is not available?

    Hi all,
              We are currently working on SAP CRM, the component version is SAP CRM ABAP 6.0 (SAP CRM 2007).
    Previously the component version was SAP CRM 5.0, so as you can understand it has been upgraded from 5.0 to 6.0.
    Now when we use the transaction code SE80 and try to create a "proxy object" from "Enterprise Service" in the context menu, this feature is no more available.
    Initially it was available in SAP CRM 5.0.
    Can anyone tell me What is missing in the current version SAP CRM ABAP 6.0 ? Do we need to install any Add-on?

    Yes...I got it...

Maybe you are looking for

  • How do I add a video effect to multiple clips in my timeline at once?

    How do I add a video effect to multiple clips in my timeline at once?

  • Next Meet-the-expert session: Composition tools in practice

    Composition Experts,<br> If you'd like to learn how BearingPoint Inc. uses the SAP Composition tools in their BAMS (Business Acquisition Management Solution) project, invest one hour and take part in the next Meet-the-expert session on Apr 11th, 5 -

  • Need help restoring a Library to its correct location

    I accidentally moved a folder named Library and now several programs are missing all of their data. Specifically Address Book, Mail, and Stickies. Also, Safari is missing all of its Bookmarks. When I moved this Library folder, I noticed that the icon

  • How to finalise a DVD ?

    Hi all, I have a DVD that was (mostly) created on a Sony DVD recorder. The camera was plugged directly into the unit, play was pressed on the camera and record was pressed on the unit. This was done twice. After doing that, we could play the DVD back

  • ITunes Library generic icon after transfer.

    Just upgraded to a new Mac and transfered my iTunes music and Library files manually. Everything works perfectly. I maintained Playcounts, Playlists, Last Played Dates. One small thing that's bugging me though is that the iTunes Library file has a wh