Object '485V83KBEXPI7' (ROUT) of type 'Routine' is not avble in D Version

Hi,
when i am installing BI Content Activation for InfoObject catalog 0MMPUR_CHA0,
InfoObject catalog remains Inactive and showing below error.
Object '485V83KBEXPI7VUNBAQ0D9UCR' (ROUT) of type 'Routine' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '485V83KBEXPI7VUNBAQ0D9UCR' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.

If you see so, then Goto BI Content in RSA1. Select Object Types>>> Infooject Catalog>> type ur Object name there. and transfer selections. When this object will come on ur rght panel, u can see it is in 3.5 version. Now click install now. this will get it in your rsa1 Modeling section. Then go there and say 'Migrate'.
Hope this helps.

Similar Messages

Object 'AJS9H7GM38PGOU5HYFHLSBTTB' (ROUT) of type 'Routine' is not availabl

Hi,
I have a query in BI which shows the following error after dropping the same in Transport Connection bar in R.H.S panel.
Object 'AJS9H7GM38PGOU5HYFHLSBTTB' (ROUT) of type 'Routine' is not available in version 'A
Object 'AHNJBVI0PUYSJNYXQRS2Y06NJ' (ROUT) of type 'Routine' is not available in version 'A
Object '8ASNUKY1YQJZ8B85VEJPS1DPR' (ROUT) of type 'Routine' is not available in version 'A
Object '88NXP8ZGLCTB351LNQU6XPQJZ' (ROUT) of type 'Routine' is not available in version 'A
But after collecting the query and query elements, I can see the afore mentioned 4 query elements are not getting collected under the transport req but the Req itself shows the status GREEN (after collection).
After releasing the req when I am trying to move it to PRD, the system is throwing error. I am unable to import the query in PRD.
Now can any one suggest me for the next step.
Also I want to know how and where I can search for those elements in BI system?
Thanks in advance.
Edited by: Ajanta Dutta on Jul 20, 2010 2:50 PM

Hi,
I will answer your questions one by one.
During the initial transport, system was showing that: there are few elements which has been locked by other TR Request. I unlocked the task and the request using SE03 and then again tried to collect the query and query elements in a new TR Request. I have checked option Only Necessary Objects in Grouping, Collection mode: collect automatically, Display: Hierarchy
But I cannot find those 4 query elements under query elements list. System is unable to collect those 4 query elements under the TR Request. These 4 elements are of type ROUTINE and not in Active version, as you can see from the message itself.
Rest query elements are getting collected under the TR Request. Only those 4 query elements are missing. Now pls suggest me how to proceed. How and where can I find those query elements (Routines)? Coz the tech name for those query elements are specific to query itself. I have no idea where to search for those 4 elements.
Object 'AJS9H7GM38PGOU5HYFHLSBTTB' (ROUT) of type 'Routine' is not available in version 'A
Object 'AHNJBVI0PUYSJNYXQRS2Y06NJ' (ROUT) of type 'Routine' is not available in version 'A
Object '8ASNUKY1YQJZ8B85VEJPS1DPR' (ROUT) of type 'Routine' is not available in version 'A
Object '88NXP8ZGLCTB351LNQU6XPQJZ' (ROUT) of type 'Routine' is not available in version 'A
Thank you.
Edited by: Ajanta Dutta on Jul 21, 2010 9:18 AM
Edited by: Ajanta Dutta on Jul 21, 2010 9:21 AM

Object '43TH...' (ROUT) of type 'Routine' is not available in version 'A'

Hello all,
I having this situation, first let me tell you that we have transported the queries from dev to qa and then we had to open the qa system to modify our queries. There were a lot of modifications done to the queries in QA and so now I am trying to transport the queries back to Dev so that we can transport it again via normal route.
When I am trying to collect the query in QA I am getting a lot of errors something like this:
<b>Object '43TH...' (ROUT) of type 'Routine' is not available in version 'A'</b>
You wanted to generate an object with the name '43TH...' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
<b>Object '43TH...' (RSFO) of type 'BW Formula' is not available in version 'A'</b>
You wanted to generate an object with the name '43TH..' (in transport request RSFO) of type 'BW Formula' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Can someone tell me why is it erroring out and where can I look to fix it.
Thanks,
Raj

Raj,
Can you please check the formula you mentioned in the Table RSZCALC Table, Provide ELTUID = "43TH...". check the Version whether it is 'A' or 'D'.
If it is not available in 'A' Version, then check the Formula creation.
Probably, it may help you.
Regards,
Nagesh Ganisetti.
Assign points if it helps.

Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

Hi Gurus,
Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
The process chain contains processes for:
- starting the process chain
- executing infopackage (for loading data to 0figl_o10),
- ACR (activate data in 0figl_o10)
- delete index 0figl_c10
- DTP loading data from 0figl_o14 to 0figl_c10
- executing infopackage 80FIGL_O10
- creating index in 0figl_c10
- building DB statistics
- rolling up aggregates in 0figl_c10
- deleting of requests from the changelog 0figl_o10
- deleting of requests from PSA (0fi_gl_10)
How to find what cause that error.
Regards,
Leszek

Hi,
A SAP consultant told me to ignore that error.
Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
The problem is described in sap note: 883745.
Regards, Leszek

Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in versn D.

Hi friends ,
I am getting below error while doing the BI Content Activation.Please guide me for possible solution :this is for two three infoobjects.Do in need to reconfigure the system??
Object '0DB87SIC1' (IOBJ) of type 'InfoObject' is not available in version
'D'
    Message no. RSO252
Diagnosis
    You wanted to generate an object with the name '0DB87SIC1' (in transport
    request IOBJ) of type 'InfoObject' (TLOGO). This is, however, not
    available in the BW Repository database. It does not exist in the
    requested version D. If the version is 'D' then it is possible that an
    error arose during the delivery or installation. If the version is 'A'
    then the Object was either not created or not activated.
System Response
    The object was not taken into account in the next stage of processing.

hi,
This is not an error but while installing bunch of infoobjects, it will say which one of them it doesnot have in the system could be the problem in patches.Could be very old.
Hence better you create a infobject equivalent of the object you require and use it and goahead.
Thanks
Kumar

'Routine' is not available in version 'A'

Hi,
We are transporting process chain to QA system. At the time of collecting the objects for making transport request, gives following errors.
Object '3RWUNFJ34X9ZGLXAL6VWXBPBA' (ROUT) of type 'Routine' is not available in version 'A'
Above object is not found in the Business content and BW Repository as well?
Also searched with Update rules and transfer rules, i didn't find this object?
Could you help to fix this issue?
Thanks

hi
I am having a similar issue saying that the "UPDR DK....." could not be found, when I try to do the "simulate install".
I see the object in BCT (but the symbol is white) and I find that also in Metadata repository as well (it is green there)..
How can I activate it?. (or make it work?)
Thanks for the help.
Esan

Unable to Transport Querys Object (ELEM) of type 'Query' is not available in version 'A'

Hi,
We need to transport some querys from production BW 7.3.1SP7 to synch with Dev. I know, I know but had no choice but to created querys in PBW due to no data in DEV...
In RSA1, we collect query and get errors for every object (ckf,rkf, vars etc) and when changing dsiplay from hiearchy to list, there are no objects included under the query element.
Opened the system in SCC4 for automatic recording of changes and changes to repository and cross clinet customization allowed and changed the client role to Test.
Tried opening and resaving the query in query designer.
Query is active in table RSRREPDIR
Checked SCN and OSS have yet to find a solution
http://scn.sap.com/thread/1758171
http://scn.sap.com/thread/1623756
Here are the error details
Object '4T3M5JI7050ENPG6G336XWYNK' (ELEM) of type 'Query' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '4T3M5JI7050ENPG6G336XWYNK' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Thank you so much for your time!
Lee Lewis

This is an SAP BUG which is corrected by this note:
> 1762785 - Object '!XYZ...' (ELEM) of type Query is not available.
> 1816332 - Object 'XYZ...' (ELEM) cannot be collected (RSO296)
Lee Lewis

Document type ZD does not allow you to assign to object MARA

hi ppl,
I have created a Z document type.but its not allowing me to assign in mm02.what might be the problem..? its throwing an error message Document type ZD does not allow you to assign to object MARA.

You need to enable object linking to mara on your new document type. Go to Tcode DC10, select the document type and then go to the object links area. Create a new object link for your document type.

Conversion of a data object of type "C" to type "l" is not supported

Experts:
i have below code in my FM; defined as remote-enabled module.
when i execute i get the error analysis as:
You attempted to move one data object to another.
This is not possible here because the conversion of a data object
of type "C" to type "l" is not supported.
This at the line    move <FS2> TO <wwa_mdm_name_value_pair>-VALUE .
what are the steps to debug this? Thanks!
DATA: tt_mdm_name_value_pair_table TYPE mdm_name_value_pair_table.
FIELD-SYMBOLS : <wwa_mdm_name_value_pair> LIKE LINE OF tt_mdm_name_value_pair_table.
FIELD-SYMBOLS <FS1> TYPE ANY.
FIELD-SYMBOLS <FS2> TYPE any.
data:st_mdm_name_value_pair type mdm_name_value_pair.
assign st_mdm_name_value_pair to <wwa_mdm_name_value_pair>.
assign st_mdm_name_value_pair-code to <FS1>.
assign st_mdm_name_value_pair-value to <FS2>.
clear wa_ZSTRESULT.
loop at T_UPDATE into wa_ZSTRESULT.
    assign wa_ZSTRESULT-field to <FS1>.
    <wwa_mdm_name_value_pair>-CODE = <FS1>.
    assign wa_ZSTRESULT-VALUE to <FS2>.
    move <FS2> TO <wwa_mdm_name_value_pair>-VALUE .
    append <wwa_mdm_name_value_pair> to tt_mdm_name_value_pair_table.
endloop.

resolved using GET REFERENCE.. code looks as below: Thanks!
DATA: tt_mdm_name_value_pair_table TYPE mdm_name_value_pair_table.
FIELD-SYMBOLS : <wwa_mdm_name_value_pair> TYPE LINE OF mdm_name_value_pair_table.
FIELD-SYMBOLS <FS1> TYPE ANY.
FIELD-SYMBOLS <FS2> TYPE DATA.
TYPES t_dref TYPE REF TO DATA.
DATA dref TYPE REF TO DATA.
DATA: TT_UPDATE TYPE ZTYRESULT.
FIELD-SYMBOLS : <WA_UPDATE> LIKE LINE OF TT_UPDATE.
data:   st_mdm_name_value_pair type mdm_name_value_pair.
assign st_mdm_name_value_pair to <wwa_mdm_name_value_pair>.
assign st_mdm_name_value_pair-code to <FS1>.
assign st_mdm_name_value_pair-value to <FS2>.
clear wa_ZSTRESULT.
TT_UPDATE = T_UPDATE.
loop at TT_UPDATE assigning <WA_UPDATE>.
    assign <WA_UPDATE>-FIELD to <FS1>.
    <wwa_mdm_name_value_pair>-CODE = <FS1>.
    assign <WA_UPDATE>-VALUE to <FS2>.
    GET REFERENCE OF <WA_UPDATE>-VALUE INTO dref.
*    MOVE dref TO <wwa_mdm_name_value_pair>-VALUE.
    <wwa_mdm_name_value_pair>-VALUE = dref.
    append <wwa_mdm_name_value_pair> to tt_mdm_name_value_pair_table.
endloop.

Object ZPAK does not exist in objekt version A for object type Infopackage

Hi,
I've transported Info packages to Quality, but in STMS of Qua I've got warning that Info package doesn't exist in object version A. Also I'm unable to see this info package in RSA1 tcode too. I'm working on BI 7.3 environment. The below error messages I've got when I tried to activate the process chain in RSPC for that particular Info package.
Process variant LOADING ZPAK_4AHP0TXLG506DKX1302Q8R9SW does not exist in version A
InfoPackage no longer exists in object version A in table RSLDPIO
DS from QS does not exist in A version; cannot load
Variant 'ZPAK_4AHP0TXLG506DKX1302Q8R9SW' of process type 'LOADING' not found in A version
Type "Complete Deletion of Data Target Contents" process cannot follow process "Execute InfoPackage" variant ZPAK_4AHP0TXLG506DK

First you need transport info pack form dev to bw quality.
Later you can transport your process chain.
As my guess your not listening what i said at your previous threads.
You need to follow the sequences.
if your info pack(trigger it once) was exist at bw quality then again retransport your chain to bw q.

Exception [type: SIGSEGV, Address not mapped to object]

Hi,
I'm working on an Oracle Database 11g Release 11.1.0.6.0 - 64bit Production With the Real Application Clusters option.
I'm trying to execute the below:
      SELECT /*+ CURSOR_SHARING_EXACT */
             vc.id_vehicle, gr.geoRouteId, g.name, round(g.length) length_, gr.active,
             g.id_user id_user_georoute_owner, gr.grBindUserId id_user_bind_owner,
             (SELECT count(*) FROM dual WHERE XMLEXISTS('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM") = 1) alm_out
        FROM configurator.t_vehicle_configuration vc, dispatch.v_georoute g,
             xmltable('$XML/vehicleconf/GeoRoute/geoRoute[@active="1"]'
               passing vc.x_configuration AS "XML"
               columns geoRouteId   number path '@id',
                       active       number path '@active',
                       grBindUserId number path '@id_user',
                       geoRouteUser xmltype path 'user'
             ) gr
       WHERE vc.id_vehicle = 453
         AND g.id_georoute = gr.geoRouteId;but after few seconds I got the error in the object.
The alert log says:
+Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x38] [PC:0x483CEFD, evahtr()+495]+
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB2/trace/EVODB2_ora_13769.trc (incident=301686):
+ORA-07445: exception encountered: core dump [evahtr()+495] [SIGSEGV] [ADDR:0x38] [PC:0x483CEFD] [Address not mapped to object] []+
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB2/incident/incdir_301686/EVODB2_ora_13769_i301686.trc
The trace doesn't say more:
+ORA-07445: exception encountered: core dump [evahtr()+495] [SIGSEGV] [ADDR:0x38] [PC:0x483CEFD] [Address not mapped to object] []+
+========= Dump for incident 301686 (ORA 7445 [evahtr()+495]) ========+
----- Beginning of Customized Incident Dump(s) -----
+Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x38] [PC:0x483CEFD, evahtr()+495]+
The strange stuff is that if I remove the
(SELECT count(*) FROM dual WHERE XMLEXISTS('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM") = 1) alm_out
from the query, there is no problem.
Do you have any suggestion?
Thanks in advance,
Samuel

The strange stuff is that if I remove the
(SELECT count(*) FROM dual WHERE XMLEXISTS('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM") = 1) alm_out
from the query, there is no problem.That's probably because you're not using XMLExists correctly.
The function returns a boolean value so you don't need to test for 1 or 0 as we had to with existsNode function before :
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28369/xdb04cre.htm#sthref360
It's also probably better to use a CASE expression instead of a subquery :
SELECT /*+ CURSOR_SHARING_EXACT */
       vc.id_vehicle
     , gr.geoRouteId
     , g.name
     , round(g.length) length_
     , gr.active
     , g.id_user id_user_georoute_owner
     , gr.grBindUserId id_user_bind_owner
     , case when XMLExists('$XML_ALM/user/alarmwhen[@direction="out"]' passing gr.geoRouteUser AS "XML_ALM")
            then 1
            else 0
       end as alm_out
FROM configurator.t_vehicle_configuration vc
   , dispatch.v_georoute g
   , xmltable('$XML/vehicleconf/GeoRoute/geoRoute[@active="1"]'
               passing vc.x_configuration AS "XML"
               columns geoRouteId   number path '@id',
                       active       number path '@active',
                       grBindUserId number path '@id_user',
                       geoRouteUser xmltype path 'user'
     ) gr
WHERE vc.id_vehicle = 453
AND g.id_georoute = gr.geoRouteId
;Even better, you can test the condition directly in the COLUMNS clause with fn:exists XPath function.
For example, something like this :
SQL> with sample_data as (
2    select xmltype('<root>
3 <row><item>1</item><other id="a"/><other id="x"/></row>
4 <row><item>2</item><other id="b"/></row>
5 <row><item>3</item><other id="b"/></row>
6 </root>') doc
7    from dual
8 )
9 select x.*
10 from sample_data t
11     , xmltable(
12         '/root/row'
13         passing t.doc
14         columns item number path 'item',
15                 flag number path 'exists(other[@id="x"])'
16       ) x
17 ;
      ITEM       FLAG
         1          1
         2          0
         3          0

ZSAPLINK for Object type = CLAS is not working

Dear Experts,
ZSAPLINK for Object type = CLAS is not working. On executing by selecting Export Object to Slinkee with Object type = CLAS and class name, It is giving the dump which is shown in below snapshots. Pls guide me how to resolve this error.
Thanks
KH

From the screenshot, It seems that the object _renderer did not point to any memory location.
You can verify this by putting a breakpoint in method IF_IXML~CREATE_RENDERER of class CL_IXML
If the return value RVAL is initial, this mean there something wrong with the kernel module abkm_iXML_CreateRenderer. If it is, you will have to check with your Basis team to apply some kernel patches.
Hope it helps. Cheers!

Error: Object "MFModule" of type ApplicationModule is not found !!

Hi all ,,,
Am facing a problem in my "MFApplication" that I developed using oracle jdeveloper 11g R2
all the screens is developed as a page fragments task flows and they are shown in an oracle dynamic shell tabs starting page
All the task flows are tuned to "always begin new transaction" from the task flow property and all the buttons are immediate true
but sometimes when I press the save button to save an html form record I get this message:
"Object "MFModule" of type ApplicationModule is not found !!"
can you help me ,,,
Edited by: Mohd Ramadan on Mar 31, 2013 4:40 AM

yes I've tested it
and it runs alone ok
Edited by: Mohd Ramadan on Mar 31, 2013 5:24 AM

Object type 'EBAN' is not defined

Hi All,
I have a developed a custom workflow for PR release.
but the workflow is not triggering.
When i checked in SWU3 configuration, check event linkages, i found that the error message Object type 'EBAN' is not defined.
Can someone tell me what it means and how can i fix it?
Thanks and regards,
Raj

Hi PK,
r u using ReleaseStrategy, did u try simulate it, get help from MM consultant, check whether its working perfect.
If tht works fine, switch on ur SWEL (first go to SWELS and click SwitchOn).
Create a PR and chk SWEL, see if ur object BUS2105 is triggered ?
Aditya

Class type 022 is not defined for object for BATMAS

Hi Experts,
while creaitng the LSMW for batch classification,I faced the error during IDOC processing as "Class type 022 is not defined for object".I am using
Business Object      BUS1001002
Method               SAVEREPLICA
Message Type         BATMAS
Basic Type           BATMAS03
Pleas guide how to resolve the error.
Also ,as I intend to make LSMW for batch classifications.Is this the correct way.
Please guide on this also.
Regards.

Hello Jass,
Symptom
The BATMAS03 basis type (message type BATMAS) /FB BAPI_BATCH_REPLICATE cannot transfer any classification information. Please review note 1070634.
First Option :
You should first transfer the batmas and then the clfmas idoc.
Second Option :
You could create the batch together with classification. Normally the problem is the missing CUOBJ_BM in table MCH1. It is not necessary in all situations that the field have to be filled, but it can be in some cases (And it is better to store the right information in the corresponding fields). Especially when you transfer batch/classification information in other system the field have to be filled.
The way to create the batch TOGETHER with classification by using BATMAS IDOC is to set the following parameters correctly :-
set E1BPBATCHCTRL-DOCLASSIFY to X and fill the segments with relevant classification information
E1BP3060_ALLOCATION
E1BP3060_VALUATION_CHAR
E1BP3060_VALUATION_CURR
E1BP3060_VALUATION_NUM
In this case the field mch1-cuobj_bm should be filled with correct CUOBJ. You can also use function module BAPI_BATCH_SAVE_REPLICA to create batches together with classification.
Hope this information helps
Regards
Amber

Object '485V83KBEXPI7' (ROUT) of type 'Routine' is not avble in D Version

Similar Messages

Maybe you are looking for