Implementation class ZCL_*****************does not exist
Hi ,
I implemented BADI - ME_PROCESS_PO_CUST ,tested in development system,worked well.
When I moved it to Test system I am geting the below error.Is there any thing I need to do while transporting the implementation..
Implementation class ZCL_IM_ME_PROCESS does not exist
Message no. ENHANCEMENT363.
Can any body temm me what sould I do now.
Regards
Rammohan.
Hi,
Are you sure the you have transported the class ZCL_IM_ME_PROCESS ?
Check in SE24 --> Goto --> Object Directory entry --> Lock overview.
May be the class was saved in a different request and you did not transport it
Regards
Similar Messages
-
Object class name does not exist in IDM
Hi Team
We are process of Integrating GRC 10.1 to Enterprise Portal.Followed accordingly as per the SAP Note No. 1977781.
While running the Schema Job, we get a message Schema Imported Suxcessfully. While running the Job : GRAC_REPOSITORY_SYNC_JOB, the job
shows successful, but a Warning Message : User Adaptor Empty in SLG1 T.code.
I have checked the Path suffix,connectors,data source and all are maintained but no sure about this warning message.
Secondly,I tried for test creation of user on Portal via GRC 10.1.I am getting below error
"Object class name does not exist in IDM" Please see log below
Request gets closed stating Auto Provisioning failed.Please advice if someone has faced same issue and the steps taken to rectify it.
Thanks
NiteshHi Nitesh,
We worked on this issue for quiet sometime with SAP to get this finally fixed You can check all below mentioned notes.
First Check:
Please check the Note: 1915763 - Error Provisioning from GRC 10 to SAP Portal while adding or removing a role in Change Account request type.
This Note says that if your LDAP set as data source is read-only in Portal, then you need to change it to Modifiable in order to allow create or change user belonging to LDAP.
We have set the UME correctly and no longer read-only. But our access requests still used to fail with the following messages.
"Object class name does not exist in IDM".
Second Check:
Kindly ensure the field mapping for portal is done in IMG settings properly.
If it is fine please check below note 2033714 - AC10.0: error in SGL1 "Object class name does not exist in IDM".
This note is only to check if you have made any mistake with your portal mapping and doesn't address the correct issue.
Third Check:
Finally after implementing SAP note 1941250 - UAM: Truncated parameters provisioned on changing users from Access Request
our issue got fixed.
Regards,
Madhu. -
Post Goods Issue - error : Class type does not exist - Message no. VK662
Hi,
I am trying to do Post Goods Issue and getting this error: Class type does not exist
When double click on the error, it shows it is a message no vk662.
Any help to resolve it is appreciated. Thanks in advance.
-SriSri
There is a problem in batch determination.
The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
Display the batch from the delivery item using MSC3N and go into the Classification tab. You should have a class of class type 22. See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
Hope this helps. -
Class OracleXMLStore does not exist error
I get keep getting this error but don't know why
ORA-29540 class OracleXMLStore does not exist
Did anyone else get this error. When I try and run the
oraclexmlsqltest.sql script I get this error. I installed the
XML Sql utility and configured my class paths. I am using Oracle
8.1.5 and Java 1.2.2
Any help is appricated
Thanks
nullI got the same thing, but found that some of the paths in the
env.bat were not correct for my system. After I edited this
file and ran it, I reloaded the classes. It worked fine after
that.
Minh Pham (guest) wrote:
: Hi Murali,
: I ran into the same problem as Arpan. I tried with different
: versions of JDK (1.2.1, 1.2.2, and 1.1.5). Following your
: suggestion, I installed JDK 1.1.8 (there is a JDK 1.1.7B-- I
: didn't want to install a beta version of the JDK). The same
: exact problem still persists.
: My next questions are:
: 1. How do you test to see if all the classes loaded
correctly?
: I ran the env.bat and oraclexmlsqlload.bat files, but I don't
: exactly whether these files loaded the classes correctly.
: 2. Is JDK 1.1.8 supported?
: 3. Is there anymore documentation available? I followed all
the
: steps prescribed in the online documentation, but I still felt
: something is missing.
: Thanks for your help.
: Minh
: Oracle XML Team wrote:
: : Hi Arpan,
: : The problem could be that the classes did not get loaded
: : correctly. One reason could be that you are using Java 1.2
: : whereas the supported versions for 8.1.5 is JDK 1.7.
: : Two things,
: : Did u run oraclexmlsqlload.csh (or .bat for windows)
first?
: : Cause this is the one that loads all the classes (the
: : oraclexmlsql.jar and xmlparser.jar into the database).
: : Second, if u did, did the loadjava commands in
: : oraclexmlsqlload.csh load sucessfully? If not please recheck
: the
: : JDK version and load these again.
: : All oraclexmlsqltest.sql does is to check if these things
: got
: : loaded successfully.
: : Thx
: : Murali
: : Arpan Desai (guest) wrote:
: : : I get keep getting this error but don't know why
: : : ORA-29540 class OracleXMLStore does not exist
: : : Did anyone else get this error. When I try and run the
: : : oraclexmlsqltest.sql script I get this error. I installed
: the
: : : XML Sql utility and configured my class paths. I am using
: : Oracle
: : : 8.1.5 and Java 1.2.2
: : : Any help is appricated
: : : Thanks
: : Oracle Technology Network
: : http://technet.oracle.com
null -
Class DbwsProxy does not exist when connecting to WEB SERVICE
Hi,
I am trying to connect to the OC4J sample web service using the Oracle supplied method specified in this document.
http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm
We of course use a 10g DB.
The DBWS Callout Utilities were successfully installed by our systems team.
When I run the sample script for the PL/SQL Dynamic Invocation Interface (DII)
I get this error:
ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist
ORA-06512: at "SYS.UTL_DBWS", line 178
ORA-06512: at "ABS.CHANNA_TEST_PLSQL_DII", line 14
ORA-06512: at line 1
Why is this??
Any help would be grately appreciated?
Is there any grans/permissions we have to give?
Thanks & Regards,
Channa.Be certain to "propagate permissions" for the shared volume. Under Manage Devices, look for hardware, "Server" then the tab on the right, storage, gear icon at bottom.
This will change the permissions for all files, folders and sub folders. -
Add HW Inventory class that does not exist in a default inventoried class
Hello all,
I am trying to find a way to create a new class to supersede the win32_logicaldisk class. We are looking to add the VolumeDirty flag since it does not exist in the current SMS_logicaldisk class. However I cant seem to find a good way to do this. Has anyone
done something like this before? Adding new classes doesn't seem to be difficult, but since this is a default WMI class that is being inventoried, I don't want to make any modifications to it as I know I will regret it down the road. I was thinking maybe creating
a configuration item and inventorying it that way? Thoughts? Or is this even possible? Thanks in advance!
ScottI do similar things--create a new I-Made-It-Up class to pull in something that the default doesn't. I understand and agree with not modifying default classes--it perhaps would never be a problem--but if (perhaps maybe) some future upgrade or cumulative
update failed to install because you modified a default class, it could be a sad sad day. :)
If you want me to just write the mof edit for you, let me know. Otherwise for a sample of how to do that; look at the mof edits for 'making up my own' SQL inventory:
http://mnscug.org/blogs/sherry-kissinger/328-installed-sql05-sql08-sql12-sql14-version-information-via-configmgr-hardware-inventory
Essentially, you make up a configuration.mof edit; making a 'copy of' what you really want out of win32_logicaldisk, but you dump it into a cm_scott_x_awesomeness (or whatever you want to call it), and you put that at the bottom of configuration.mof
on your server.
Then your to-be-imported.mof into default client, hardware inventory, classes... import (if you're old skool, the sms_def.mof piece of it) will be a .mof file to inventory cm_scott_x_awesomeness
Just be careful to name what you really want to see in v_gs_NameThatView inside the quotes SMS_Group_Name and SMS_Class_ID. You'll be living with that table and view name forever, so maybe, perhaps, calling it Scott_X_Awesomeness just might not be
the best name ever (although it sounds great right now, at review time w/the boss maybe not so much).
Standardize. Simplify. Automate. -
ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist
Hi ,
We are getting below error while executing webservice from PL/SQL block. Please help what would be wrong in below code. Thanks in advance.
ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist
ORA-06512: at "SYS.UTL_DBWS", line 318
ORA-06512: at "FUSION.ADD_NUMBERS", line 21
29540. 00000 - "class %s does not exist"
*Cause: Java method execution failed to find a class with the indicated name.
*Action: Correct the name or add the missing Java class.
PL/SQL Code
CREATE OR REPLACE FUNCTION add_numbers (username IN VARCHAR, password IN VARCHAR)
RETURN NUMBER
AS
l_service SYS.UTL_DBWS.service;
l_call SYS.UTL_DBWS.call;
l_wsdl_url VARCHAR2(32767);
l_namespace VARCHAR2(32767);
l_service_qname SYS.UTL_DBWS.qname;
l_port_qname SYS.UTL_DBWS.qname;
l_operation_qname SYS.UTL_DBWS.qname;
l_xmltype_in SYS.XMLTYPE;
l_xmltype_out SYS.XMLTYPE;
l_return NUMBER;
returnVal BOOLEAN;
boolean_type_qname sys.utl_dbws.QNAME;
string_type_qname sys.utl_dbws.QNAME;
BEGIN
sys.UTL_DBWS.SET_PROPERTY(l_call,'USERNAME','fusion');
sys.UTL_DBWS.SET_PROPERTY(l_call,'PASSWORD','fusion');
l_wsdl_url := 'http://adcdab06.us.oracle.com:10217/xmlpserver/services/PublicReportWSSService?wsdl';
l_namespace := 'http://xmlns.oracle.com/oxp/service/PublicReportService/';
l_service_qname := SYS.UTL_DBWS.to_qname(l_namespace, 'PublicReportWSSServiceService');
l_port_qname := SYS.UTL_DBWS.to_qname(l_namespace, 'PublicReportWSSService');
l_operation_qname := SYS.UTL_DBWS.to_qname(l_namespace, 'validateLogin');
l_service := SYS.UTL_DBWS.create_service (URIFACTORY.getURI(l_wsdl_url),l_service_qname);
l_call := SYS.UTL_DBWS.create_call (l_service,l_port_qname,l_operation_qname);
sys.utl_dbws.set_target_endpoint_address(l_call, 'http://adcdab06.us.oracle.com:10217/xmlpserver/services/PublicReportWSSService');
boolean_type_qname :=sys.utl_dbws.to_qname ('http://www.w3.org/2001/XMLSchema', 'boolean');
string_type_qname :=sys.utl_dbws.to_qname ('http://www.w3.org/2001/XMLSchema', 'string');
sys.utl_dbws.add_parameter(l_call, 'BI_Admin', string_type_qname, 'ParameterMode.IN');
sys.utl_dbws.add_parameter(l_call, 'Welcome1', string_type_qname, 'ParameterMode.IN');
-- sys.utl_dbws.add_parameter (l_call,returnVal,boolean_type_qname,'ParameterMode.OUT');
sys.utl_dbws.set_return_type (l_call, string_type_qname);
-- utl_dbws.add_parameter(l_call_, 'ubiNum', string_type_qname, 'ParameterMode.IN');
--sys.utl_dbws.add_parameter(l_call, 'TEST', string_type_qname, 'ParameterMode.IN');
--l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
--<validateLogin xmlns="' || l_namespace || '">
--<validateLoginInput>' || p_int_1 || '</validateLoginInput>
--</validateLogin>');
l_xmltype_out := SYS.UTL_DBWS.invoke(call_Handle => l_call, request => l_xmltype_in);
SYS.UTL_DBWS.release_call (call_handle => l_call);
SYS.UTL_DBWS.release_service (service_handle => l_service);
dbms_output.put_line('WS Executed successfully...');
-- l_return := l_xmltype_out.extract('//return/text()').getNumberVal();
RETURN 11;
END;
/Check if this helps:
ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist -
ZL_BT115H_S_DETAILS_CN00 does not exists after EEWB enhancements
Hi Gurus,
I have enhanced the component view BT115H_SLSO/details initially, after some days, I have added two Zfields to BTADMINH using EEWB. while opening the Context node BTADMINH in the view BT115H_SLSO, the following error message is being displayed: Object type ZL_BT115H_S_DETAILS_CN00 does not exist.
while opening the link to create the sales order in Web UI, the following Exceptions occured:
CX_SY_CREATE_OBJECT_ERROR - The object could not be created: The class ZL_BT115H_S_DETAILS_CN00 does not exist.
Method: CL_BSP_MODEL=>CREATE
Source Text Row: 12
Initialization of view BT115H_SLSO/Details failed
An exception has occurred Exception Class CX_SY_CREATE_OBJECT_ERROR - The object could not be created: The class ZL_BT115H_S_DETAILS_CN00 does not exist.
Method: CL_BSP_MODEL=>CREATE
Source Text Row: 12
Cannot display view BT115H_SLSO/DetailsVS
An exception has occurred Exception Class CX_SY_CREATE_OBJECT_ERROR - The object could not be created: The class ZL_BT115H_S_DETAILS_CN00 does not exist.
Method: CL_BSP_MODEL=>CREATE
Source Text Row: 12
Initialization of view BT115H_SLSO/DetailsVS failed
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View BT115H_SLSO/Details could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 162
Cannot display view BT115H_SLSO/SOHOverView
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View BT115H_SLSO/Details could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 162
Cannot display window MainWindow.
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View BT115H_SLSO/DetailsVS could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 162
Any idea of why this exception is occured.
Did anyone faced the same issue? if yes,please share me the solution.
Thanks and Regards,
S ReddyHi Suchita,
Thanks for your quick response.
Actually we have not done any enhancements to the BTADMINH context node. we have enhaced the CRMD_ORDERADM_H table using the EEWB fields. After this I have checked the component BT115H_SLSO/view to provide the value help for the fields, the Zclass was automatically assinged to the Context and Page attribute remained same for BTADMINH.
I have checked in the SE24, the class does not exists. I have created a copy of CL_BT115H_S_DETAILS_CN00 as ZL_BT115H_S_DETAILS_CN00 and assigned to BTADMINH and Page attributes of the same view. After I have opened the Web UI, the following exceptions are occured:
Context generation failed in view BT115H_SLSO/Details
An exception has occurred Exception Class CX_SY_MOVE_CAST_ERROR - Source type \CLASS=ZL_BT115H_S_DETAILS_CN00 is not compatible, for the purposes of assignment, with target type \CLASS=CL_BT115H_S_DETAILS_CN00
Method: ZL_BT115H_S_DETAILS_CTXT=>CREATE_BTADMINH
Source Text Row: 13
Initialization of view BT115H_SLSO/Details failed
An exception has occurred Exception Class CX_SY_MOVE_CAST_ERROR - Source type \CLASS=ZL_BT115H_S_DETAILS_CN00 is not compatible, for the purposes of assignment, with target type \CLASS=CL_BT115H_S_DETAILS_CN00
Method: ZL_BT115H_S_DETAILS_CTXT=>CREATE_BTADMINH
Source Text Row: 13
Cannot display view BT115H_SLSO/DetailsVS
An exception has occurred Exception Class CX_SY_MOVE_CAST_ERROR - Source type \CLASS=ZL_BT115H_S_DETAILS_CN00 is not compatible, for the purposes of assignment, with target type \CLASS=CL_BT115H_S_DETAILS_CN00
Method: ZL_BT115H_S_DETAILS_CTXT=>CREATE_BTADMINH
Source Text Row: 13
Initialization of view BT115H_SLSO/DetailsVS failed
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View BT115H_SLSO/Details could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 162
Cannot display view BT115H_SLSO/SOHOverView
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View BT115H_SLSO/Details could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 162
Cannot display window MainWindow.
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View BT115H_SLSO/DetailsVS could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 162
Thanks and Regards,
S Reddy -
Class CL_RSR_QUERY_VARIABLES does not exit anymore
Dear all,
Class CL_RSR_QUERY_VARIABLES does not exist anymore in NW04s. Does anybody know what is the new class that substitutes it?
Thanks and regards,
Flavia SanchezHi Michael,
I am the guy responsible for this development.
The class is used in a function module to execute a BW Query and return a xml string within a BSP application. The result table of the query is used within the BSP application logic to fill the graphical presentation layer that consitutes the front end of the BSP application.
Here is the statement within the FM where the class is used:
DATA: wf_query_var TYPE REF TO cl_rsr_query_variables .
Here is the call to the FM within the BSP application (Even Handler: OnInputProcessing):
CALL FUNCTION 'Z_RMZ_BW_SEM_NGRM_EXE_QRY'
EXPORTING
QUERY_NAME = rpt_tech_id
IMPORTING
XML_OUT = xml_out
REF_RESULT_TAB = res_tab
TABLES
QUERY_VARIABLES = var
RETURN = breturn
META = meta
EXCEPTIONS
BAD_VALUE_COMBINATION = 1
USER_NOT_AUTHORIZED = 2
UNKNOWN_ERROR = 3
QUERY_NOT_FOUND = 4
OTHERS = 5.
If this class does not exist with this name in NW then I assume it must exist as another object since this is THE class for programming with query variables.
Thanks for your support.
Greetings,
Martin -
ChaRM class java.io.IOException:The file does not exist on the filesystem
Hi All,
We are implementing ChaRM with Portal. While deploying we are running into following issue.
Deployable-Id:/usr/sap/trans/data/GPSK90001B/sktp14_20100806_095633.epa
Returncode:'12'
class java.io.IOException:The file (/usr/sap/trans/data/GPSK90001B/sktp14_20100806_095633.epa) does not exist on the filesystem.
Any suggestion.
Regards,
SmitaWe resolved this issue by sharing the trans file across SolMan and Portal system.
-
Country implementation 40 does not exist for category IT and type 2001
Dear Experts,
I am getting the following error
"Country implementation 40 does not exist for category IT and type 2001".
when I tried to create a leave request. I think the HR Ess configuration is complete.
Kindly, give your valuable inputs, hence I can try & resolve this issue, as I am stuck with this for quite sometime.
Your inputs will be really valuable.
Thanks
BalaAfter suffering this same problem and not finding any help or information ANYWHERE, I debugged the process and found that the error is caused by a missing entry in view V_BLPTYPECOUNTRY.
I created a new entry in the view with a blank molga and the error goes away.
The entry I added was:
Category = IT
Data Typ = 2001
Ctry Grouping = (blank)
Class = CL_PT_BLP_IT2001
I hope that this can help anyone having the same problem in the future. -
Enhancement object does not exist for enhancement implementation
Hi Experts,
When i tried activating my implementation, i got the sujected error. any kind of inputs will be very helpful. This is an existing implementation and was last changed in October, I just wanted to added few more changes to that.
Here is the long description of the problem.
Diagnosis
An enhancement implementation xxxxxxxxx was delivered to customers, but the enhanced object YYYYYYYYYY does not exist in the system. The corresponding record does not exist in Table .
This can have different reasons:
The enhanced program object YYYYYYYYYY belongs to a different software component than the enhancement and this software component was not relevant for delivery.
An error occurred during system setup so that the enhanced object YYYYYYYYYY was not imported.
The enhancement implementation xxxxxxxxx is obsolete and the enhanced object YYYYYYYYYY has meanwhile been deleted or copied. As a result, there could be enhancement implementations in the system that have not been adjusted or that have incurred an error during deletion or renaming.
Procedure
Contact your system administrator and try to clarify the problem - if necessary, with SAP's help.Hi Reddy,
1) Please go through the enhance implementation of that. 2) Check whether any thing activation is missing.3) Check the implementation class. It is better to understand if you explain for which badi you are using.
Regards,
Madhu. -
Object Custom Program Name of class RE and language EN does not exist
Hi All,
We are getting this bbelow error while running a custome program ,
Object <Custom Program Name> of class RE and language EN does not exist
Do any one has faced this similar issue earlier.
Regards,
SenHi,
How did you resolve this problem ?
Re: Object <Custom Program Name> of class RE and language EN does not exist.
I am also encountering the same issue when I am executing the report.
Regards,
SSR. -
Class oracle/jpub/runtime/dbws/DbwsProxy does not exists on 10g Rel2
I trying using UTL_DBWS with samle from url http://www.freelists.org/archives/oracle-l/03-2005/msg00670.html in 10g Rel2 but I take error: class oracle/jpub/runtime/dbws/DbwsProxy does not exists .What I do incorrect?
However, using web service in Oracle rdms very hard...May be exists simply example for dummies?Not really for dummies, but it may be a good way to get started:
Oracle Database Programming Using Java and Web Services, by Kuassi Mensah.
You have also the following resouces on OTN: Database Web Services.
-- Eric -
ORA-29829: implementation type does not exist
Hello,
I get ORA-29829: implementation type does not exist when creating an external table in
Oracle 10g 10.2.0.3.0. Anyone knows why this happens?
Wrote file afiedt.buf
1 CREATE TABLE tim
2 ORGANIZATION EXTERNAL
3 (
4 TYPE ORACLE_DATA_PUMP
5 DEFAULT DIRECTORY tim_dir
6 LOCATION ('tim.dmp')
7 )
8* AS SELECT * FROM dba_tables
AB0318@ditoa1> /
CREATE TABLE tim
ERROR at line 1:
ORA-29829: implementation type does not exist
AB0318@ditoa1> select * from V$OPTION;
PARAMETER VALUE
================================================================ ===================================
Objects TRUE
Regards,
TimORA-29829: implementation type does not exist
Cause: The implementation type specified with USING clause could not be found.
Action: Check to see if the type exists and the user has EXECUTE privilege on this type.
Maybe you are looking for
-
What is the best way to handle .mod files in premiere pro cs4?
I recently got a JVC Everio GZ-MG130u and as I'm sure many of you are aware, it saves footage in the .mod format. I have googled this and found quite a few different solutions, but I'm just wondering if anything has changed since some of these soluti
-
Enabling Hebrew as a language choice
Hey all, I have some Israeli songs and all the information is in Hebrew. I'd like to see hebrew characters on iTunes rather than aeioeiaai type stuff. Does anyone know how to make this possible? Hebrew is not a choice on the language pulldown in pref
-
10.4.9 Update Problem
Hi Guys, I have had a problem updating to 10.4.9 that I thought you all might be able to help me with. Now I am not running what you would call a "Standard" system, so let me get the system specs out of the way. - PowerMac G4 AGP 500Mhz with Sonnet E
-
Control recipe cretaion if the process inst categories assigned in Order
Hi, As i understand you can assign the process instruction category either in o10c or in process order- opertion - phase, it self. my doubt is if it is assigned in phase of the order, there is no fileds like general scope, filter etc which is there i
-
How can i manually update my ipod 4g now i have 4.1 but i wanna update to 6.1.3
how can i manually update my ipod 4g now i have 4.1 but i wanna update to 6.1.3 please help me its very urgent