Object Replication / Many objects

What is the best approach to introduce a new object to replicate to a group after a previous object has been replicated? Imagine, peer A shared object A to the group using addhaveObjects(0, chunks(A)) and all peers successfully replicated that object. Next, peer B wants to share another object B to the same group. By just doing addhaveObjects(0, chunks(B)) this won't do anything as all lower indices (e.g. 0 - 10) have been "used" for the replication of object A already - at least that is what I expect to happen.
So is the best practice to create a new group for the new replication and notify all peers in the current group to join that group? Or should B just start at index chunks(A)+1 for the new object B, i.e. addhaveObjects(chunks(A)+, chunks(A) + 1 + chunks(B))?
Dirk.

Hello
Your last guess is the best, "Or should B just start at index chunks(A)+1", except that the object replication space needs not be contiguous so you may start each object at a round value, say objectIndex*1024.
As a note, it may be hard for the "seed" to know when all data it sent has been replicated amongst all; also, some peers may join later. There's nothing wrong, however, with different peers seeding different pieces of content at the same time, just make sure everybody shares all the received chunks.
Good luck

Similar Messages

Replication issue in ABAP to ABAP scenario

Hello,
I have a ABAP to ABAP replication scenario where I am replicating custom and standard tables like MDMA but found below issue.
The replication current action is struck in "Replication (Initial Load)" with Initial load is getting done but not replicating data afterwards.
Also, the tables is keep on switching between "Failed" and "In process" status. I checked the system is sufficient number of jobs.
I found below error message after checking the show error log.
I restarted the replication many times and even created the configuration but no luck.
Please enlighten me to fix this issue...
Regards

Hi Tobi,
I removed all the records from target table and replicated again but same result.
Initial load is getting done but not replicating data afterwards. And the table is keep on switching between "Failed" and "In process" status.
Regards

Transactional Replication Stalled.

Hi,
We are having a Transactional replication issue where the Data does not get replicated and the log Just keeps grawing.
Last week we had an accidental load 15 Million records, on one of the T replication enabled Db's .Then the replication stopped working i mean i look at the replication monitor it says NO transactions to replicate but we have a lot difference
with the DATA.I also see that the logfile file for the DB is growing.
1.I did a few things like stopping the log reader and restarting.
2.Reinitialize the Snapshot ,the snapshot is taken but is not being applied to the subscriber .No error msg that i can see.
So had to drop the replication entirely , shrink the log and recreate it adding few bunches of articles, creating a snapshot for them wait until they are applied and then add the other articles which worked fine for few days , and DB replication
stopped again and log started growing.This time it is also effecting other replications this time too.
I am running out of options can some one plz help!
THanks,
Jack

That message means the log reader agent is going through the log reading commands from it. If your ETL operation does large batch operations replication many not be able to keep up. You might need to break these batches up into smaller batches - batchsize
works well here.
Another thing to consider is to do your ETL operation on both sides. This works well if the only source of changes occurs from the ETL process - then you would not publish these tables.
If not - think about use MaxCmdsInTran - you can set this to something like 10,000 which means that if you do a million row update - the log reader agent will start to read the commands out of the log for every 10,000 changes and replicate them to the subscriber
- before the transaction is committed on the publisher.
This is a command that you can put in your log reader agent profile so you can turn it off when the ETL process is done and replicated.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Public Folders on Microsoft Exchange

Is there a way to access public folders on Microsoft Exchange. This can be any version of ColdFusion and any version of Exchange. Right now I have CF9 and Exchange 2007, but we are looking to upgrade to CF10 and Exchange 2013.

UPDATE: (WORKING)
I tried Mihir's suggestion to change the ownership to the SERVERNAME$ for the objects within the CN=Microsoft Exchange System Objects container. I could not check the actual owner on any new folders as they will not appear in this container until they are
mail enabled. (Of which I cannot mail enable them)
On trying to change the owner from SYSTEM which is what it is on seemingly all objects, whilst I could select the Exchange server from the list, the setting would not take. (The SERVERNAME$ never appears in the list of possible owners after selecting it)
Instead I tested giving the Exchange Server (SERVERNAME$) full control permission on one of the objects/Public Folders. (Via ADSIEdit) This immediately allowed me to change as properties for the folder to include Send-As. (At last!!)
To fully resolve all permission issues, noting the Exchange server is a member of the Exchange Trusted Subsystem Group, I gave this group full control permissions on the CN=Microsoft Exchange System Objects folder and this resolved ALL permission issues
to include being able to create new folders, mail enable them etc.
No reboots/logoff etc were required, the settings are taken immediately. (Mileage may vary with replication)
Many thanks for getting me on the right track.

Public access issues

Hello everyone,
I am very new to all this and just took the iTunes U readiness seminar last month.
We have just gotten our transfer script up on a test machine and so we have administrator access. We have not gotten authentication up and running yet. We have it set up in several different languages Perl, Python, and Java. But I think that we are going to go with the Perl. We also have access via woolamaloo.
We opened up the All@urn:mace:itunesu:com:sites:<ourdomain> to download in the edit access area and we do have public access to the site. I threw up some test sections and put courses in them, made sure that the courses had download access for All but when I go to the public site I do not see any sections or courses.
I thought that maybe I had to add content to one of the courses so I tried to upload some m4v's but every time I was just redirected to the iTunesU page and my content was not there. I thought that perhaps I had to wait awhile for it to upload but I did it this morning and it is still not there.
Any help would be appreciated, thanks.
Autumm

UPDATE: (WORKING)
I tried Mihir's suggestion to change the ownership to the SERVERNAME$ for the objects within the CN=Microsoft Exchange System Objects container. I could not check the actual owner on any new folders as they will not appear in this container until they are
mail enabled. (Of which I cannot mail enable them)
On trying to change the owner from SYSTEM which is what it is on seemingly all objects, whilst I could select the Exchange server from the list, the setting would not take. (The SERVERNAME$ never appears in the list of possible owners after selecting it)
Instead I tested giving the Exchange Server (SERVERNAME$) full control permission on one of the objects/Public Folders. (Via ADSIEdit) This immediately allowed me to change as properties for the folder to include Send-As. (At last!!)
To fully resolve all permission issues, noting the Exchange server is a member of the Exchange Trusted Subsystem Group, I gave this group full control permissions on the CN=Microsoft Exchange System Objects folder and this resolved ALL permission issues
to include being able to create new folders, mail enable them etc.
No reboots/logoff etc were required, the settings are taken immediately. (Mileage may vary with replication)
Many thanks for getting me on the right track.

CRM 2007 - Replication Objects & developments

Dear all
We are on CRM 5.0 and in the process of migrating to CRM2007. Our business process is such that we have many replication objects (BPs from CRM to ECC6, Sales transactions from CRM to ECC, Material, pricing from ECC to CRM) that flow back and forth via middleware.
Now the question is during or after the upgrade, do we need to do something different to make sure this works seamlessly as it does for us now? Or do we need to do initial and delta loads again?
Also regarding JAVA and ABAB development items, I am assuming we can just update these components to CRM2007 via technical master guide.
In IC Win client, we have done a lot of enhancements including inbox searches, new EEWB fields. Would we need to develop these all over?
Please send your replies and thoughts.
Regards
Jai

Jai,
If your middleware is "vanilla" then you should not have to do anything except for the upgrade guide post-processing steps. Just make sure to "turn off" the middleware before the upgrade(clear out all open queues on ERP, deregister queues on ERP, clear out all queues in CRM, clean up middleware history) According to the upgrade guide you may need to regnerate your adapter objects.
Yes just follow the master/upgrade guides to upgrade those components as normal.
All your Winclient screen enhancements need to be migrated to the CRM webclient screens. However you won't need to recreate any of the fields on the underlying database. All the UI level enhancements will need to be reimplemented manually.
Take care,
Stephen

What are replications objects and subscriptions???

Hello All,
I am working with CRM 5.0
I want to know what are replications objects and subscriptions and how it is work with sites and BDocs? The process is not clear to me and how is the relationship between them?
Regards
Jacopo Francois

Hello Jacopo,
The CRM Middleware course material CR500/CR540/CR550 details out the concepts of a Replication Obj,Publication and Subscription.
Let me try and illustrate this concept with a real-world example. This is normally the example I provide whenever I train employees.
What do you do when you want to subscribe for SAP Netweaver magazine published from SAP Press?
1) SAP Press publises a number of SAP magazines. So, first you select the publication of your choice. Your publication = "SAP Netweaver".
2) Next, you have to subscribe for it in the website by furnishing your credit card details, shipping address and the duration of your subscription. So, that becomes your subscription. So, a publication can have many subscriptions (sent by many people)
The replication object is just the abstraction which collects all the publications and their corresponding subcriptions and relates them a particular Bdoc type. Normally, the name of a replication object = Name of the Bdoc type. E.g. BUPA_MAIN. Replication objects can be bulk objects or simple intelligent objects depending on whether mass data or filtered data is desired. Naturally, there will not be any subscriptions for a bulk replication object.
Now, once you have created a site and have done its configuration, you can associate the site to a number of replication objects depending on what type of data would the site be interested in.
Hope you are now able to figure out the meaning of these MW terms and understand the relationship between them.
Please reward with points if this helps!
Thanks,
Sudipta.

Object Replication Manager - Errors 6004

Hello everyone.
I'm seeing these errors in SMS_OBJECT_REPLICATION_MANAGER component.
I have seen many posts with the same issue reported, but none with answer that would help me correct this in my environment, like here:
http://social.technet.microsoft.com/Forums/en-US/3f0cc0ed-5fd9-4860-aabd-e40e8f62053f/sms-object-replication-manager-failed-to-process-sms-object-changes?forum=configmgradminconsole
These errors do not go away. Instead, they keep piling up.
I looked at replication logs for more details but there is really nothing relevant there.
Does anyone have any suggestions where else could be the issue?
Thanks you for your help.

Hi,
My fault, the steps in the blog below should work.
"SCCM and components:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ SMS \ Tracing \ ENABLED = 1 – (REG_DWORD – General SCCM turn on Logging)
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ SMS \ Tracing \ xxxxxxx \ Enabled = 1 – (REG_DWORD – The Role SCCM’de If you change the compositions according to him)
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ SMS \ Tracing \ xxxxxxx \ MaxFileSize = 3000000 – (REG_DWORD – 3 MB large – NAL and Debug Logging for growth with more than it is worth)
Important components to be linked to SQL for SQL logging, open the key: HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ SMS \ Tracing \ Sqlenabled = 1 – (REG_DWORD) "
SCCM ConfigMgr 2012 How to Turn On Verbose SQL NAL logging
(Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice.
Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while creating MV replication group object

Hi,
I am getting error while creating replication group object. I tried to create using OEM and SQLPlus
OEM error
This error while creating M.V. rep. group object
There is a table or view named SCOTT.EMP.
It must be dropped before a materialized view can be created.
In SQLPLUS
SQL> CONNECT MVIEWADMIN/MVIEWADMIN@SWEET
Connected.
SQL>
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
3 gname => 'SCOTT',
4 sname => 'KARTHIK',
5 oname => 'emp_mv',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema KARTHIK does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 2
Please not already I have created KARTHIK schema.

Arthik,
I think I know what may have happened.
As I can see you are trying to create support for an updateable materialized view.
You have to make sure the name of the schema that owns the materialized view is the same as the schema owner of the master table (at master site).
From the code you have shown, I bet the owner of table EMP is SCOTT.
From the other hand, you want to create materialized view EMP_MV under schema KARTHIK that refers to table SCOTT.EMP at master site.
According to the documentation, the schema name used in DBMS_REPCAT.CREATE_MVIEW_REPOBJECT must be same as the schema that owns the master table.
Please check the documentation at the link below
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrcatpac.htm#i109228
I tried to reproduce your example in my environment, and I got exactly the same error which actually confirms my assumption that the reason for the error is the fact that you tried to create the materialized view in a schema with different name than the one where master table exists.
I'll skip some of the steps that I used to create the replication environment.
I have two databases, DB1.world and DB2.world
On DB2.world I will generate replication support for table EMP which belongs to user SCOTT
SQL> conn scott/*****@DB2.world
Connected.
SQL>create materialized view log on EMP with primary key;
Materialized view log created.
SQL>
SQL>conn repadmin/*****@DB2.world
Connected.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPGROUP(
3         gname => 'GROUPA',
4         qualifier => '',
5         group_comment => '');
6*   END;
PL/SQL procedure successfully completed.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
3         gname => 'GROUPA',
4         type => 'TABLE',
5         oname => 'EMP',
6         sname => 'SCOTT',
7         copy_rows => TRUE,
8         use_existing_object => TRUE);
9*   END;
10 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2       DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT(
3         sname => 'SCOTT',
4         oname => 'EMP',
5         type => 'TABLE',
6         min_communication => TRUE);
7    END;
8 /
PL/SQL procedure successfully completed.
SQL>execute DBMS_REPCAT.RESUME_MASTER_ACTIVITY(gname => 'GROUPA');
PL/SQL procedure successfully completed.
SQL> select status from dba_repgroup;
STATUS
NORMAL                                                                          Now let's create updateable materialized view at DB1. Before that I want to let you know that I created one sample in DB1 user named MYUSER. MVIEWADMIN is Materialized View administrator.
SQL>conn mviewadmin/****@DB1.world
Connected.
SQL>   BEGIN
2       DBMS_REFRESH.MAKE(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => '',
5         next_date => SYSDATE,
6         interval => '/*1:Hr*/ sysdate + 1/24',
7         push_deferred_rpc => TRUE,
8         refresh_after_errors => TRUE,
9         parallelism => 1);
10    END;
11 /
PL/SQL procedure successfully completed.
SQL>   BEGIN
3       DBMS_REPCAT.CREATE_SNAPSHOT_REPGROUP(
5         gname => 'GROUPA',
7         master => 'DB2.wolrd',
9         propagation_mode => 'ASYNCHRONOUS');
11    END;
12 /
PL/SQL procedure successfully completed.
SQL>conn myuser/*****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW MYUSER.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'MYUSER.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'MYUSER',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema MYUSER does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 3 I reproduced exactly the same error message.
So the problem is clearly in the schema name that owns the materialized view.
Now lets see if what would happen if I create the MV under schema SCOTT which has the same name as the schema on DB2.world where the master table exists.
SQL>conn scott/****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW SCOTT.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'SCOTT.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'SCOTT',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
PL/SQL procedure successfully completed.As you can see everything works fine when the name of the schema owner of the MV at DB1.world is the same as the schema owner of the master table at DB2.world .
-- Mihajlo
Message was edited by:
tekicora

Many db objects error after Upgrate EBS 12.1.1 to EBS 12.1.3

Hi,
recently we have upgraded our EBS from 12.1.1 to 12.1.3 and there are almost 777 invalid objects after recompiling using adadmin.
I tried to recompile INVALID objects using utlrp.sql but I am getting below error.
SQL> @utlrp.sql
SELECT dbms_registry_sys.time_stamp('utlrp_bgn') as timestamp from dual
ERROR at line 1:
ORA-00904: "DBMS_REGISTRY_SYS"."TIME_STAMP": invalid identifier
DOC> The following PL/SQL block invokes UTL_RECOMP to recompile invalid
DOC> objects in the database. Recompilation time is proportional to the
DOC> number of invalid objects in the database, so this command may take
DOC> a long time to execute on a database with a large number of invalid
DOC> objects.
DOC>
DOC> Use the following queries to track recompilation progress:
DOC>
DOC> 1. Query returning the number of invalid objects remaining. This
DOC> number should decrease with time.
DOC> SELECT COUNT(*) FROM obj$ WHERE status IN (4, 5, 6);
DOC>
DOC> 2. Query returning the number of objects compiled so far. This number
DOC> should increase with time.
DOC> SELECT COUNT(*) FROM UTL_RECOMP_COMPILED;
DOC>
DOC> This script automatically chooses serial or parallel recompilation
DOC> based on the number of CPUs available (parameter cpu_count) multiplied
DOC> by the number of threads per CPU (parameter parallel_threads_per_cpu).
DOC> On RAC, this number is added across all RAC nodes.
DOC>
DOC> UTL_RECOMP uses DBMS_SCHEDULER to create jobs for parallel
DOC> recompilation. Jobs are created without instance affinity so that they
DOC> can migrate across RAC nodes. Use the following queries to verify
DOC> whether UTL_RECOMP jobs are being created and run correctly:
DOC>
DOC> 1. Query showing jobs created by UTL_RECOMP
DOC> SELECT job_name FROM dba_scheduler_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>
DOC> 2. Query showing UTL_RECOMP jobs that are running
DOC> SELECT job_name FROM dba_scheduler_running_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>#
DECLARE
ERROR at line 1:
ORA-04067: not executed, package body "APPS.UTL_RECOMP" does not exist
ORA-06508: PL/SQL: could not find program unit being called: "APPS.UTL_RECOMP"
ORA-06512: at line 4
SELECT dbms_registry_sys.time_stamp('utlrp_end') as timestamp from dual
ERROR at line 1:
ORA-00904: "DBMS_REGISTRY_SYS"."TIME_STAMP": invalid identifier
PL/SQL procedure successfully completed.
DOC> The following query reports the number of objects that have compiled
DOC> with errors (objects that compile with errors have status set to 3 in
DOC> obj$). If the number is higher than expected, please examine the error
DOC> messages reported with each object (using SHOW ERRORS) to see if they
DOC> point to system misconfiguration or resource constraints that must be
DOC> fixed before attempting to recompile these objects.
DOC>#
select COUNT(*) "OBJECTS WITH ERRORS" from obj$ where status = 3
ERROR at line 1:
ORA-00942: table or view does not exist
DOC> The following query reports the number of errors caught during
DOC> recompilation. If this number is non-zero, please query the error
DOC> messages in the table UTL_RECOMP_ERRORS to see if any of these errors
DOC> are due to misconfiguration or resource constraints that must be
DOC> fixed before objects can compile successfully.
DOC>#
select COUNT(*) "ERRORS DURING RECOMPILATION" from utl_recomp_errors
ERROR at line 1:
ORA-00942: table or view does not exist
DECLARE
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at line 31
BEGIN dbms_registry_sys.validate_components; END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_REGISTRY_SYS.VALIDATE_COMPONENTS' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Please advise for further.
Thanks in advance,
Nish

950358 wrote:
Thanks Husain,
I have run utlrp.sql but still there 777 invalid objects available in my system.
Please advise.
Thanks,
NishWhat is the error you get when you compile those objects?
How many invalid objects you have under each schema?
Please see old threads for the invalid objects MOS docs (after R12 upgrade and generic ones).
https://forums.oracle.com/forums/search.jspa?threadID=&q=Invalid+AND+Objects+AND+12.1.3&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Invalid+AND+Objects+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How many users do you have using Busines Objects Enterprise?

Post Author: hcso
CA Forum: Deployment
How many people did you first roll it out to and was it a difficult process? I'm guessing there was training and documentation made available?
Using:
Business Objects Enterprise Release 2 SP2
SQL Server 2000 Data Mart
IIS
.NET framework installed
Crystal Reports XI R2
Active Directory authentication
Windows Server 2003 virtual machine
Service Pack 2
Intel 3 GHz
1.02 GB RAM
15 G hard drive
Thank you!

The sparsebundle will expand in size as required.. there is not set size.. when the hard disk is full then each TM should start deleting old backups. If you want to set a size for each backup then you will need to create a disk image.. but really TM can be left to look after this itself.
http://pondini.org/TM/33.html

Many to Many with Custom Objects 4 and up

Hello,
Pls. I need to define a new CO4 that will have a many to many relationship with Contact.
From OD help pg.775 I understand that I should use another CO (f.ex. CO5) to be the intersection. Help file indicates how to rename the objects...and put them in the related info. section... but I don´t know what FIELDS (if any) I should define in the intersection CO5.
Pls. Anyone could help ?
Txs. a lot.
Antonio

Yes. You have to define them in CO5 Layout.
You should see Name, Contact and Custom Object 04 (you may have renamed it). Not the Id field.
Then when you add THE CO5 layout to Contact Related section, you can add new association between Contact and CO4.
Don't forgot to enable the Access Profiles in Contact, CO4 and CO5.

How many of these objects should I be able to insert per second?

I'm inserting these objects using default (not POF) serialization with putAll(myMap). I receive about 4000 new quotes per second to put in the cache. I try coalescing them to various degrees but my other apps are still slowing down when these inserts are taking place. The applications are listening to the cache where these inserts are going using CQCs. The apps may also be doing get()s on the cache. What is the ideal size for the putAll? If I chop up myMap into batches of 100 or 200 objects then it increases the responsiveness of other apps but slows down the overall time to complete the putAll. Maybe I need a different cache topology? Currently I have 3 storage enabled cluster nodes and 3 proxy nodes. The quotes go to a distributed-scheme cache. I have tried both having the quote inserting app use Extend and becoming a TCMP cluster member. Similar issues either way.
Thanks,
Andrew
import java.io.Serializable;
public class Quote implements Serializable {
    public char type;
    public String symbol;
    public char exch;
    public float bid = 0;
    public float ask = 0;
    public int bidSize = 0;
    public int askSize = 0;
    public int hour = 0;
    public int minute = 0;
    public int second = 0;
    public float last = 0;
    public long volume = 0;
    public char fastMarket; //askSource for NBBO
    public long sequence = 0;
    public int lastTradeSize = 0;
    public String toString() {
        return "type='" + type + "'\tsymbol='" + symbol + "'\texch='" + exch + "'\tbid=" +
                bid + "\task=" + ask +
                "\tsize=" + bidSize + "x" + askSize + "\tlast=" + lastTradeSize + " @ " + last +
                "\tvolume=" + volume + "\t" +
                hour + ":" + (minute<10?"0":"") + minute + ":" + (second<10?"0":"") + second + "\tsequence=" + sequence;
    public boolean equals(Object object) {
        if (this == object) {
            return true;
        if ( !(object instanceof Quote) ) {
            return false;
        final Quote other = (Quote)object;
        if (!(symbol == null ? other.symbol == null : symbol.equals(other.symbol))) {
            return false;
        if (exch != other.exch) {
            return false;
        return true;
    public int hashCode() {
        final int PRIME = 37;
        int result = 1;
        result = PRIME * result + ((symbol == null) ? 0 : symbol.hashCode());
        result = PRIME * result + (int)exch;
        return result;
    public Object clone() throws CloneNotSupportedException {
        Quote q = new Quote();
        q.type=this.type;
        q.symbol=this.symbol;
        q.exch=this.exch;
        q.bid=this.bid;
        q.ask = this.ask;
        q.bidSize = this.bidSize;
        q.askSize = this.askSize;
        q.hour = this.hour;
        q.minute = this.minute;
        q.second = this.second;
        q.last = this.last;
        q.volume = this.volume;
        q.fastMarket = this.fastMarket;
        q.sequence = this.sequence;
        q.lastTradeSize = this.lastTradeSize;
        return q;
}

Well, firstly, I surprised you are using "float" objects in a financial object, but that's a different debate... :)
Second, why aren't you using pof? Much more compact from my testing; better performance too.
I've inserted similar objects (but with BigDecimal for the numeric types) and seen insert rates in the 30-40,000 / second (single machine, one node). Obviously you take a whack when you start the second node (backup's being maintained, plus that node is probably on a separate server, so you are introducing network latency.) Still, I would have thought 10-20,000/second would be easily doable.
What are the thread counts on the service's you are using?; I've found this to be quite a choke point on high-throughput caches. What stats are you getting back from JMX for the Coherence components?; what stats from the server (CPU, Memory, swap, etc)?; What spec of machines are you using? Which JVM are you using? How is the JVM configured? What's are the GC times looking like? Are you CQC queries using indexes? Are your get()'s using indexes, or just using keys? Have you instrumented your own code to get some stats from it? Are you doing excessive logging? So many variables here... Very difficult to say what the problem is with so little info./insight into your system.
Also, maybe look at using a multi-threaded "feeder" client program for your trades. That's what I do (as well as upping the thread-count on the cache service thread) and it seems to run fine (with smaller batch sizes per thread, say 50.) We "push" as well as fully "process" trades (into Positions) at a rate of about 7-10,000 / sec on a 4 server set-up (two cache storage nodes / server; two proxies / server.) Machines are dual socket, quad-core 3GHz Xeons. The clients use CQC and get()'s, similar to your set-up.
Steve

Recent loss of embedded QT movies on many page for IE7 using ActiveX object

I have many pages that allow you to select from 4 video formats including QT .mov. An example is at http://www.cwdjr.net/video4/cancanL.php . The QT object uses ActiveX when on IE only(I use Windows conditional comments) and an ordinary object for most other browsers. Until sometime very recently all of these pages worked when you select the QT file. Now QT works on none of them. I suspected the problem might be due to a very recent Windows XP update which is a large one including .NET updates and other things(K8951847) X 86. I was able to restore to a day before this update, but this did not solve the problem. Of course some portions of some updates can not be removed be restoring to an earlier time, so the result does not prove the update was not at fault.
The involved pages are mostly written in php on the server, so you will not be able to see very much by viewing the source code. To make the problem more simple to view, I made a test page for QT only and with the ActiveX object only. Thus this test page can not be viewed on most browsers that do not support ActiveX. The test page is at http://www.cwdjr.info/broadbandMedia/formatsAX/qtmovtest2.php . Since I serve pages as valid xhtml 1.1 using the correct mime type application xhtml+xml, no IE browser can view the page, since no IE browser can support xhtml served properly. Thus I have a php include at the very top for header exchange between the browser and server. If this says the page does not support the mime type for xhtml, then php using regular expressions, etc is used to rewrite the page as html 4.01 strict for the outmoded browser. Thus don't be surprised if you find some pages in xhtml and others in html when you check properties.
The ActiveX object used for QT on the test page is below:
QT MOV
(CLICK ABOVE LINK IF NO PLAYER)
<object classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" width="400" height="295" codebase="http://www.apple.com/qtactivex/qtplugin.cab">
<param name="autoplay" value="true" />
<param name="controller" value="true" />
<param name="kioskmode" value="true" />
<param name="src" value="http://www.cwdjr.info/movie/cancan.mov" />
</object>
Once the page comes up on IE7, it is rather slow to respond. Then it gives:
"Web site wants to install the following ActiveX control: 'Quick Time' from 'Apple Inc'".
If you do try to install, nothing happens. In contrast to my regular pages, I added the code show above just before the start of the object. Clicking this on will bring up the QT video, but of course it is not embedded on the desired page. This may work as a temporary fix for IE. I likely can hide it from other browsers by enclosing it in Microsoft conditional comments.
I would be interested if anyone else has had such a problem recently or any ideas concerning this strange response on IE7. I am talking about viewing the page on the server. Since this is a php page it can be viewed locally only if you have a server installed on your computer and I do not. The pages with the first url example given above have operated well on IE7, Firefox, Opera, Safari for Windows, Flock, K-Meleon, Google Chrome and SeaMonkey. There are a few players that have some issues with some of the formats, but this and the fact that some players may not be installed is the reason for offering the video in 4 formats. I sometimes offer high broadband versions as well as low broadband versions.
It seems I spend more time correcting IE issues than for all of the other mentioned browsers combined.

Thanks for the reference. I use nearly no JS anymore, since it often causes problems with true xhtml served properly even when you use external script files. Often one can use php script on the server and avoid these problems. When one serves as true xhtml using the correct mime type of application/xhtml+xml, the page is parsed with a very strict xml parser rather than a loose-as-a-goose html parser. (If one serves a page written in xhtml code as mime text/html, as is incorrectly done perhaps 99% of the time, you are using only html, not xhtml, and are fooling only yourself. The page is parsed as html instead of xhtml.) The xml parser has to be very strict to account for any possible xml content. Even a single, or even several, errors often will not prevent a html page from showing, but even a single error on an xhtml page served properly will often get an error report from the xml parser rather than a view of the page. One of the most laughable examples of misunderstanding of this issue is the home page of Microsoft. It claims to be xhtml. However it is served as text/html and thus would be better written in html 4.01 in the first place. Moreover, if you validate the page as xhtml at w3c, you find hundreds of xhtml errors. If Microsoft served their home page properly as application/xhtml+xml it of course would not work on any IE browser, at least through IE7, since none of these IE browsers can handle true xhtml. In addition the page likely would not show up on any browser if served as true xhtml until all of the hundreds of xml and other errors on the page were corrected. Instead, one likely would get a very long error report rather than a view of the page.
Back to JS, document.write will not work in properly served xhtml, because it easily could produce code with XML errors. For instance it might produce code that contains an unclosed tag, which is a major xml error that can cause an xml device to malfunction. The xml parser thus rightly finds document.write as an error and prevents viewing of the page. However one often can generate the same code as document.write would produce on a browser with php on the server. The finished code is what gets downloaded to the browser, so the xml parser can check everything in the finished code rather than quess what a JS document.write might produce. And don't think you can sweep document.write under the rug by using an external JS file. The very strict xml parser finds it.
Of course embed has never been a w3c tag, but rather is a bad hangover from the browser war era, a gift of Netscape. No page that includes embed can validate as w3c xhtml or xml of any flavor, at least through xhtml 1.1. However the page may work, despite the error, if server as text/html.
All I know is that something has happened recently that has caused my problem to surface. It likely has to do with some change in the XP OS or IE browser. I have tried viewing several pages written by others that use many types of code for .mov, and all of them I have viewed that use an ActiveX embed for the benefit of IE now have the problem I mentioned. If anyone else with XP and nearly all updates, including the very recent one I mentioned, and the most recent version of QT has had this problem, I could be more confident that the problem comes from an external source. If not, it is still possible the sudden change could be something concerning a specific issue that has developed in my computer.
Again, thanks for the JS reference. Some of this likely can translate into php so I can compare how the JS and php server script I am using relate.

Too many objects match the primary key oracle.jbo.Key

Hi OAF Gurus,
Currently we are implementing R12 Upgrade , for this we have deployed all the custom OAF Application related files on to the the respective JAVA_TOP folder.
We have a custom municipal postal application which tracks the Postal Details.
The page runs perfectly fine without any error in 11i instance, but the same is erroring out In R12.
In R12 it shows an error as Too many objects match the primary key oracle.jbo.Key[112010 2014-10-01]
here 112010 is nothing but the postal code id and 2014-10-01 is the Effective Start Date
We have a custom table as xxad_postal_codes_f (Date Track table)which contains the postal_code_id and effective_start_date (primary key is combination of postal_code_id and effective_start_date ).
The Table already contains a row for postal_code_id = 112010 and Effective_Start_date = Sysdate.
Now we want to update the entry for the same postal code with the Id being same as 112010 and Effective_Start_date as 2014-10-01 through custom PostCodeChangePG
at the time of save we are getting an error as Too many objects match the primary key oracle.jbo.Key[112010 2014-10-01]
The table doesn't contain any of the data mentioned ([112010 2014-10-01]) at the time of insertion, hence there should not be any duplication of primary key but still we are getting the error.
Please let us know how can we handle this..?
Below is the code which is getting called on Click of Save button of PostCodeChangePG
if (pageContext.getParameter("Apply") != null)
      PCodeCoWorkerBase coWorker = getCoWorker(pageContext, webBean);
          coWorker.processApply();
Code in PCodeCoWorkerBase
    public void processApply()
      String postalCodeId = UIHelper.getRequiredParameter(pageContext, "postalCodeId");
      Date startDate = UIHelper.getRequiredDateParameter(pageContext , "EffectiveStartDate");
     Serializable[] postalCodeData = (Serializable[]) applicationModule.invokeMethod( "insertPostalCodeMajorChange", params, paramTypes );
      finalizeTransactionAndRedirect( postalCodeData );
Code in Application Module
public Serializable[] insertPostalCodeMajorChange ( String postalCodeId, Date date )
    PCodeAmWorker amWorker = new PCodeAmWorker(this);
    return amWorker.insertMajorChange( postalCodeId, DateHelper.convertClientToServerDate( getOADBTransaction(), date )
Code in PCodeAmWorker
public Serializable[] insertMajorChange ( String postalCodeId, Date date )
    // Get the view objects we need from the application module
    OAViewObject viewObject = (OAViewObject) applicationModule.getPCodesVO();
    PCodesVORowImpl currentRow = (PCodesVORowImpl) viewObject.getCurrentRow();
    currentRow.validate();
    currentRow.setEffectiveStartDate(date);
    currentRow.setComment1(currentRow.getNewComment());
// Create a new row based on the current row
PCodesVORowImpl newRow = (PCodesVORowImpl) viewObject.createAndInitRow(currentRow); //This is failing out and gives the error
// Get the new effective start date as entered by the user
Date effectiveStartDate = currentRow.getEffectiveStartDate();
    // Calculate the previous period's effective end date
    Date previousEffectiveEndDate = DateHelper.addDays(effectiveStartDate, -1);
    // Refresh the current row (the one changed by the UI) with the data it had at the beginning of the transaction
    currentRow.refresh(Row.REFRESH_UNDO_CHANGES);
    // The current row will now represent data for the the previous period set the effective end date for the previous period
    currentRow.setEffectiveEndDate(previousEffectiveEndDate);
    // Insert the newly created row that now represents the new period
    viewObject.insertRow(newRow);
    applicationModule.apply();
    return generateResult(newRow);
PCodesVO() is based on PostalCodeEO
below is the code from PostalCodeEOImpl
public void create(AttributeList attributeList)
    // NOTE: This call will set attribute values if the entity object is created with a call to vo.createAndInitRow(..)
    super.create(attributeList);
    if (getPostalCodeId() == null)
      setPostalCodeId(getOADBTransaction().getSequenceValue("XXAD_POSTAL_CODES_S"));
    if (getEffectiveStartDate() == null)
      setEffectiveStartDate(getOADBTransaction().getCurrentDBDate());
After diagnosing the issue we found that the error is on the code of AMworker file while creating a new row PCodesVORowImpl newRow = (PCodesVORowImpl) viewObject.createAndInitRow(currentRow);
we tried so many things such as clearing entity cache, VO cache, validating for duplicate primary key but still not able to resolved this.
Please advice how to insert a new row on the PCodesVORowImpl without any exception.
Thanks,
Pallavi

Hi ,
One question here , if you are udating a existing record then why you are trying to create a new row
PCodesVORowImpl newRow = (PCodesVORowImpl) viewObject.createAndInitRow(currentRow);
Thanks
Pratap

Object Replication / Many objects

Similar Messages

Maybe you are looking for