Replication issue in ABAP to ABAP scenario

Hello,
I have a ABAP to ABAP replication scenario where I am replicating custom and standard tables like MDMA but found below issue.
The replication current action is struck in "Replication (Initial Load)" with Initial load is getting done but not replicating data afterwards.
Also, the tables is keep on switching between "Failed" and "In process" status. I checked the system is sufficient number of jobs.
I found below error message after checking the show error log.
I restarted the replication many times and even created the configuration but no luck.
Please enlighten me to fix this issue...
Regards

Hi Tobi,
I removed all the records from target table and replicated again but same result.
Initial load is getting done but not replicating data afterwards. And the table is keep on switching between "Failed" and "In process" status.
Regards

Similar Messages

Acknowledgement for AsynThird-party-- SOAP-- PI-- ABAP proxy-- ECC scenario

Can someone please provide me a step-by-step for Third-party>SOAP>PI>ABAP proxy>ECC scenario.
Third-part system is sending an Asynchronous HTTPS message to PI which is then routed to the ECC system to do some processing. I have read many blong and all SAP Docu available on this subject, but i am still confused.
I understand that ABAP Proxies supports acknowledgement, but what needs to be done in the third-party system to be able to receive acknowledgements. Is there any special config. that needs to be done in Sender SOAP adapter?
What diff. needs to be done in ABAP proxy to be able to send acknowledgement messages, any config. in XI receiver adapter?
I will appreciate any guidance.
Thanks,
Saurabh

HI
Third party application need to have the synchronus communication enabled. If not then you need to get a wrapper develop for this kind of communication
For proxy development
Just go through these links:
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
ABAP Server Proxies (Inbound Proxy)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
OutBound Proxy (Client Proxy)
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
Outbound Proxy (Client Proxy)
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation

Whats the difference between ABAP stack, ABAP+Java stack and Java stack

Hello,
I have a nagging doubt about the difference between the ABAP stack, ABAP+Java stack & the Java only stack. I believe that the method of applying the kernel for all the 3 types is different.
Also can we apply the ABAP support packs through JSPM.
Please put some light on this.
Thank you

Hi Zaheer
ABAP Stack
AS ABAP is used to provide the ABAP foundation of SAP NetWeaver.
Part of AS ABAP is the Search Engine Service (SES), which enables users to search for
business objects using Search and Classification (TREX). SES accesses Search and
Classification (TREX) functions through the Search and Classification (TREX) ABAP
client. SES replicates the business objects from the ABAP application to Search and
Classification (TREX), so that it can apply Search and Classification (TREX) search
functions to them. When a user enters a search query, the Search and Classification
(TREX) system responds to it, not the database for the ABAP application. For more
information, see the document Installation Guide SAP NetWeaver TREX Single Hosts /
Multiple Host.
Java stack
AS Java is used to provide the Java foundation of SAP NetWeaver. Among the key
capabilities of AS Java are:
J2EE Engine a J2EE 1.3-compliant application server for running enterprise
applications. In addition to the pure J2EE standard technologies, the J2EE
Engine implements complementary technologies, such as Web Dynpro or Web
Services, that are targeted at supporting large-scale, real-business application
development projects.
SAP Composite Application Framework Core (CAF Core) is a service-oriented
architecture for building and deploying composite applications. It enables
modeling of different service types entity services that represent a domain
model, application services that implement business logic, and external
services that offer connectivity to back-end services by means of remote
function calls (RFCs) or Web services. Usage type AS Java comprises the CAF
Core runtime environment, while design time tools are part of the SAP
NetWeaver Developer Studio.
Web Dynpro is the user interface technology for developing professional
business applications for mobile as well as for desktop clients. Web Dynpro
applications can easily be integrated into SAP NetWeaver Enterprise Portal,
providing a unified layout for the end user as well as enhanced navigation
support. Web Dynpro also allows, for example, the development of interactive
forms using the Adobe document services.
Adobe document services is a set of runtime services that provide a range of
form and document creation and manipulation functions such as:
Converting XML form templates (created using Adobe LiveCycle Designer)
to PDF and various print formats
Setting Adobe Reader rights to enable users to fill in and annotate forms,
save and print them locally, and include digital signatures for authentication
using the free Adobe Reader software
Extracting data from SAP applications into Interactive Forms and transferring form data
back into SAP applications using XML
ABAP + Java Stack
Contains both functionalities.
I hope this helps
Regards
Chen

Mapping issue in idoc to JDBC scenario

mapping issue in idoc to JDBC scenario
source structure
E1KNB1M
BUKRS = 1000
E1KNB1M
BUKRS= 9000
E1KNB1M
BUKRS= 2000
THE NODE E1KNB1M is repeated many times and the field BUKRS is also repeated with E1KNB1M as above
TARGET field : ISFRANCHISE
if any where value of BUKRS =9000 we have to pass Y to the target filed, else N
if BUKRS = 9000   THEN ISFRANCHISE= Y
               ELSE
            ISFRANCHISE=N
I've done the mapping as below
BUKRS = 9000--> IF THEN Y ELSE N--
> ISFRANCHISE
BUT everry time the target value is N only
pl suggest
rgds
mojib

mapped like this
BUKRS--->SORT---->
                                             EQUALS --------IF---THEN    Y
9000------------------------>                                               ----------------->ISFRANCHISE
                                                              ELSE   N
context of BUKRS set to parent node
its worked
thanks to all for valuable suggestions
rgds
mojib

ABAP and ABAP Objects

Hi ,
What is the exact difference between ABAP and ABAP Objects?

Hi,
Look at:
<a href="/people/dirk.feeken/blog/2007/07/06/abap-trial-version-for-newbies-part-17--your-first-abap-object Trial Version for Newbies: Part 17 - Your first ABAP Object</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1591ec90-0201-0010-3ba8-cdcd500b17cf">ABAP Code Sample for Objects</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2503f09c-0801-0010-dc89-80bab376e4b8">Object Oriented ABAP - Local and Global classes</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47">ABAP Code Sample to Learn Basic Concept of Object-Oriented Programming</a>
<a href="https://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/37c5db90-0201-0010-3a9b-d0a5288f3c15">Eight Reasons Why Every ABAP Developer Should Give ABAP Objects a Second Look</a>
<a href="https://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3e59b790-0201-0010-88aa-bc8a7f95f6fb">Why use ABAP Objects</a>
<a href="https://media.sdn.sap.com/public/eclasses/teched04/ABAP151_files/Default.htm#nopreload=1">ABAP Objects for Java Developers</a>
Regards.
Marcelo Ramos

10.9: Server Replication Issue

Hi ther guys,
I have seen several posts about this replication issue since 2012, i have 2 fresh install systems 10.9 Server app 3.0.2 on both boxes DNS shows correctly setup but im totaly lost on where to continue.
Is there anyone out there that already resolved this?
domaintest2:~ admin$ sudo slapconfig -createreplica 192.168.2.17 diradmin
Password:
2014-01-08 01:05:11 +0000 slapconfig -createreplica
diradmin's Password:
2014-01-08 01:05:22 +0000 1 Creating computer record for replica
2014-01-08 01:05:26 +0000 command: /usr/sbin/slapconfig -delkeychain /LDAPv3/127.0.0.1 domaintest2.int$
2014-01-08 01:05:26 +0000 Added computer password to keychain
2014-01-08 01:05:26 +0000 Adding ldap and host service principals
Unable to obtain kerberos princ, using CRAM-MD5: -2
Unable to obtain kerberos princ, using CRAM-MD5: -2
2014-01-08 01:05:26 +0000 2 Creating ldap replicator user
2014-01-08 01:05:26 +0000 _ldap_replicator exists from previous replica - migrating
2014-01-08 01:05:26 +0000 NSString *_getReplicatorPasswordWithNode(ODNode *): no syncrepl attribute found in results
2014-01-08 01:05:26 +0000 Unable to get replicator password, recreating replicator
2014-01-08 01:05:27 +0000 GetLastServerID: Error creating DSLDAPContainer: 77014 Can't contact LDAP server (-1)
2014-01-08 01:05:27 +0000 ServerID for this replica 1
2014-01-08 01:05:27 +0000 SetLastServerID: Unable to create DSLDAPContainer: 77014 Can't contact LDAP server (-1)
2014-01-08 01:05:27 +0000 Error setting last server id
2014-01-08 01:05:28 +0000 command: /usr/bin/sntp -s time.apple.com.
2014-01-08 01:05:29 +0000 3 Updating local replica configuration
2014-01-08 01:05:29 +0000 4 Gathering replication data from the master
2014-01-08 01:05:29 +0000 5 Copying master database to new replica
2014-01-08 01:05:29 +0000 Removed directory at path /var/db/openldap/openldap-data.
2014-01-08 01:05:29 +0000 Starting LDAP server (slapd)
2014-01-08 01:05:30 +0000 slapd started
2014-01-08 01:05:30 +0000 Stopping LDAP server (slapd)
2014-01-08 01:05:31 +0000 command: /usr/sbin/slaptest -f /etc/openldap/slapd.conf -F /etc/openldap/slapd.d
2014-01-08 01:05:31 +0000 command: /usr/sbin/slapadd -c -w -l /var/db/openldap/openldap-data/backup.ldif
2014-01-08 01:05:31 +0000 command: /usr/sbin/slapadd -c -w -b cn=authdata -l /var/db/openldap/authdata/authdata.ldif
2014-01-08 01:05:31 +0000
2014-01-08 01:05:31 +0000 52cca45b slapd is running in import mode - only use if importing large data
52cca45b bdb_monitor_db_open: monitoring disabled; configure monitor database to enable
2014-01-08 01:05:31 +0000 6 Starting new replica
2014-01-08 01:05:31 +0000 Starting LDAP server (slapd)
2014-01-08 01:05:31 +0000 slapd started
2014-01-08 01:05:31 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2014-01-08 01:05:31 +0000 command: /usr/bin/ldapsearch -x -LLL -H ldapi://%2Fvar%2Frun%2Fldapi -b cn=config -s base olcServerID
2014-01-08 01:05:31 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2014-01-08 01:05:31 +0000 Starting password server
2014-01-08 01:05:37 +0000 CFStringRef CopyHostGUID(DSLDAPContainerRef, CFStringRef): Could not get query results
2014-01-08 01:05:37 +0000 FATAL : Could not retrieve HOST GUID for parent
2014-01-08 01:05:37 +0000 FATAL : Could not retrieve HOST GUID for parent (error = 78)
2014-01-08 01:05:37 +0000 Deleting Cert Authority related data
2014-01-08 01:05:37 +0000 No intCAIdentity, not removing int CA from keychain
2014-01-08 01:05:37 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertd.plist
2014-01-08 01:05:37 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertd-helper.plist
2014-01-08 01:05:37 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertadmin.plist
2014-01-08 01:05:37 +0000 Updating ldapreplicas on primary master
2014-01-08 01:05:37 +0000 Unable to create ODNode for domaintest1.int: 2100 Connection failed to the directory server.
2014-01-08 01:05:37 +0000 Primary master node is nil!
2014-01-08 01:05:37 +0000 Unable to locate ldapreplicas record: 0 (null)
2014-01-08 01:05:37 +0000 Error setting read ldap replicas array: 0 (null)
2014-01-08 01:05:37 +0000 Error setting write ldap replicas array: 0 (null)
2014-01-08 01:05:37 +0000 ODRecord *_getODRecord(ODNode *, NSString *, NSString *, NSArray *): ODNodeRef parameter error
2014-01-08 01:05:37 +0000 int _removeReplicaFromConfigRecord(ODNode *, NSString *): ODRecord not found
2014-01-08 01:05:37 +0000 Error synchronizing ldapreplicas: 0 (null)
2014-01-08 01:05:37 +0000 Removing self from the database
2014-01-08 01:05:37 +0000 Warning: An error occurred while re-enabling GSSAPI.
2014-01-08 01:05:38 +0000 Stopping LDAP server (slapd)
2014-01-08 01:05:39 +0000 Stopping password server
2014-01-08 01:05:39 +0000 Removed all service principals from keytab for realm DOMAINTEST1.INT
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/__db.001.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/__db.002.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/__db.003.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/__db.004.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/__db.005.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/__db.006.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/altSecurityIdentities.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/apple-config-realname.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/apple-generateduid.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/apple-group-memberguid.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/apple-group-nestedgroup.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/apple-group-realname.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/cn.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/DB_CONFIG.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/dn2id.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/entryCSN.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/entryUUID.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/gidNumber.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/givenName.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/id2entry.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/ipHostNumber.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000001.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/macAddress.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/memberUid.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/objectClass.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/ou.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/sn.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/uid.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/openldap-data/uidNumber.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/__db.001.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/__db.002.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/__db.003.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/__db.004.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/__db.005.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/__db.006.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/alock.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/authdata.ldif.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/authGUID.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/DB_CONFIG.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/dn2id.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/draft-krbPrincipalAliases.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/draft-krbPrincipalName.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/entryCSN.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/entryUUID.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/id2entry.bdb.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/log.0000000001.
2014-01-08 01:05:39 +0000 Removed file at path /var/db/openldap/authdata/objectClass.bdb.
2014-01-08 01:05:39 +0000 Removed directory at path /var/db/openldap/authdata.
2014-01-08 01:05:39 +0000 Removed file at path /etc/openldap/slapd_macosxserver.conf.
2014-01-08 01:05:39 +0000 Removed file at path /etc/openldap/slapd.conf.
2014-01-08 01:05:39 +0000 Removed directory at path /etc/openldap/slapd.d/cn=config.
2014-01-08 01:05:39 +0000 Removed file at path /etc/openldap/slapd.d/cn=config.ldif.
2014-01-08 01:05:39 +0000 Removed directory at path /etc/openldap/slapd.d.
2014-01-08 01:05:39 +0000 Removed directory at path /etc/openldap/slapd.d.backup/cn=config.
2014-01-08 01:05:39 +0000 Removed file at path /etc/openldap/slapd.d.backup/cn=config.ldif.
2014-01-08 01:05:39 +0000 Removed directory at path /etc/openldap/slapd.d.backup.
2014-01-08 01:05:39 +0000 Stopping password server
2014-01-08 01:05:39 +0000 Removed file at path /etc/ntp_opendirectory.conf.
2014-01-08 01:05:39 +0000 Removed file at path /Library/Preferences/com.apple.openldap.plist.

We're having the exact same issue, also between two 10.9 servers - any luck finding a resolution?

Active directory SYSVOL replication issues

Hello.
I have 2 domain controllers, both of them on the same site DC1 & DC2. I have added a new site with a DC3. When I have added DC3 to the domain, I have realized, SYSVOL was not initialized correctly. I went back to DC1 and found out, there's following
error in the event viewer:
Error: 4012 on DC1
The DFS Replication service stopped replication on the folder with the following local path: C:\Windows\SYSVOL\domain. This server has been disconnected from other partners for 99 days, which is longer than the time allowed by the MaxOfflineTimeInDays parameter
(60). DFS Replication considers the data in this folder to be stale, and this server will not replicate the folder until this error is corrected.
Error: 2213 on DC2
The DFS Replication service stopped replication on volume C:. This occurs when a DFSR JET database is not shut down cleanly and Auto Recovery is disabled. To resolve this issue, back up the files in the affected replicated folders, and then use the ResumeReplication
WMI method to resume replication.
This indicates a DFS replication issue between DC1 & DC2 and probably this would be the reason, why the SYSVOL was not properly initialized on DC3.
How can I restore correct DFS replication between DC1 & DC2? I've read
this article, but it's not clear to me, which of the 2 domain controllers has a good version of SYSVOL + I can not find a decent step-by-step article for reconnecting Windows 2012 domain controller.
Any idea, how I can proceed further here?

Here's a complete documentation with resolution of my issue. I have created this documentation for my own purposes in our WIKI, so I will paste it here (I hope, it will help somebody else in the future):
The Problem
We have bought a new server for our domain. This server (NEWDC01) was promoted to be a domain
controller in the DOMAIN. After the promotion, I have added a single computer to the domain. When I have logged on the client to the domain, I realized, this computer is not using the new domain controller (NEWDC01)
for authentication, but DC02 domain controller instead. This is not intended. Local clients should use local domain controllers for authentication (assuming, the Active directory sites & services are configured properly). Further investigation revealed,
there are some replication errors on OLDDC01 & OLDDC02 servers. First I need to solve these replication errors. Then I can
add the NEWDC01 server to domain properly.
Analysis
There are several errors related to DFSR replication on both domain controllers:
Error: 4012 on OLDDC01
The DFS Replication service stopped replication on the folder with the following local path: C:\Windows\SYSVOL\domain.
This server has been disconnected from other partners for 99 days, which is longer than the time allowed by the MaxOfflineTimeInDays parameter (60). DFS Replication considers the data in this folder to be stale, and this server will not replicate the folder
until this error is corrected.
Error: 2213 on OLDDC02
The DFS Replication service stopped replication on volume C:. This occurs when a DFSR JET database
is not shut down cleanly and Auto Recovery is disabled. To resolve this issue, back up the files in the affected replicated folders, and then use the ResumeReplication WMI method to resume replication.
In order to have active directory in a healthy condition, one must ensure, there’s a successful
replication between existing domain controllers up and running. If the replication does not work correctly, you can expect bunch of issues.
group policies and logon scripts are not applied correctly, or as intended
when you want to add a new domain controller to the domain, it will not work as expected (although, you will not see any specific errors after the
server is promoted to be a domain controller)
Active directory backup
I have scheduled an AD backup on OLDDC01 server using the ‘Windows Backup’ solution to make sure,
I can restore the AD / SYSVOL, in case something goes wrong. The backup is scheduled to be executed every day.
Active directory restore
In this particular case, I will talk only about SYSVOL restore. As indicated above, we must get
rid of the DFSR event viewer errors which you can find in event viewer. One of them is indicating, that the JET database was not shut down cleanly and autorecovery was disabled. The other error indicates, the SYSVOL volume is no longer replicated. I am not
sure, what is the reason, why the AD’s in the domain stopped to replicate. Probably it was an unclean server shutdown. The DFSR service stopped to replicate the SYSVOL share and I was not aware about that. When the replication did not run for more than ~99
days, the SYSVOL share was excluded from the DFSR replications.
Find out the most accurate SYSVOL share in the domain
I have compared the content of the SYSVOL directories on both OLDDC01 and OLDDC02 servers: C:\Windows\SYSVOL\domain\Policies.
Both directories have 37 subdirectories. Each subdirectory corresponds to one group policy. This means, that the content is approximately the same, thus I can’t tell, which version is most recent. I do most of the GPO changes on OLDDC01, so I made a conclusion,
that this server contains the most recent version of the SYSVOL share.
There are 2 types of SYSVOL restores, you can do:
Authoritative restore
Non-authoritative restore
Non-authoritative restore
This is a more simple kind of a restore. You can perform this kind of restore, when you are sure,
that one of the domain controllers is authoritative (e.g. you presume, the SYSVOL share is intact and working properly). If you can identify such a working server, you can perform non-authoritative restore of the active directory on a broken domain controller.
Authoritative restore
In this case, you can designate a specific domain controller to be authoritative. You set a special
flag on this server, which will prohibit to overwrite it’s state from another domain controllers, when the replication is enabled on the server again. After you designate one server to be authoritative, you need to update all the another domain controllers
using the non-authoritative procedure.
In this article, you can find, how to perform authoritative vs. non authoritative AD resotre:
http://support.microsoft.com/kb/2218556.
In my case, I was not sure, which of the domain controllers had a more recent copy of AD, so I
have decided to make OLDDC01 authoritative (check the link above). Once this has been done, I have made a non-authoritative update on OLDDC02 server.
Everything was almost ready. The last step, I needed to execute was, I needed to fix the ‘JET’
event viewer error on SRVBK1. In the event log entry on the bottom, you can find following:
Recovery Steps
1. Back up the files in all replicated folders on the volume. Failure to do
so may result in data loss due to unexpected conflict resolution during the recovery of the replicated folders.
2. To resume the replication for this volume, use the WMI method ResumeReplication
of the DfsrVolumeConfig class. For example, from an elevated command prompt, type the following command:
wmic /namespace:\\root\microsoftdfs path dfsrVolumeConfig
where volumeGuid="D37A9FC3-8B1D-11E2-93E8-806E6F6E6963" call ResumeReplication
For more information, see http://support.microsoft.com/kb/2663685.
Final words
After I have executed this command, the replication was again started between OLDDC01 and OLDDC02
servers. After I have started up the NEWDC01 server, I have realized, it has automatically replicated the contents of the SYSVOL share - almost immediately after the server was started up. I have again tried to login with the local client into DOMAIN domain
and now I see, that local client is using local Domain controller for authentication.
Everything seems to be OK now.

Value Mapping Replication - Issue - Authorization Error

Hi all,
I am trying to do value mapping replication of the data from a table in ECC system using an outbound proxy on ECC and ASync Inbound interface on XI - valuemappingreplication.
Steps followed:
1. Created Table Stucture and did write a report to extract the data from the table in ECC to send the data through Outbound proxy.
2.Followed this blog - Value Mapping replication
When tried to execute the scenario after all the steps in the above blog, we have an error in sxmb_moni saying that the authentication failed. I used pisuper, pidiruser in the receiver communication channel
3.Generated a Java Proxy for the valuemappingreplication interface.
4.Tried to deploy the .jar from the above step using SDM, I was not able to deploy it.
reg
Edited by: naveen chitluri on Jul 16, 2008 12:55 PM

All,
For the value mapping replication,
I have tried to send the message to URL directly for RWB, Test Message in the Component Monitoring http://server:50400/MessagingSystem/receive/JPR/XI.
I am getting an error saying that:
Delivery of the message to the application using connection JPR failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered: com.sap.aii.proxy.xiruntime.core.XmlRecoverableException: Interface urn:flatfile:to:flatfile#MI_EMP_FILE_ASYNC_OUT not registered
Can anyone throw some light on this.
reg

Pros & Cons for consuming web services in ABAP using ABAP PROXY

Hi,
Other then performence is there any other disadvantages like security,etc for consuming web services in ABAP using ABAP proxy?
I really appreciate if some one provide the more details(Pros & Cons ) regarding cosuming web services and I also want to know is there any other way to consume web services in ABAP.
Thanks.

<i> is there any other way to consume web services in ABAP</i>
you can use cl_http_client class to make your program to act as http client and post the soap message too webservice. This way you dont need to generate proxy, but you should know the soap message format.
Regards
Raja

Help regarding ABAP and ABAP Objects

Dear all,
I am very new in abap and abap objects. But i have some expr. in other language..specialy development. Right now i am working for srm module...So i want to move my self into abap object and specialy in workflow...Please provide me help regarding this...along with the starting point for this.
Best Regards
Vijay Patil

hi
Object Oriented prg
A programming technique in which solutions reflect real world objects
What are objects ?
An object is an instantiation of a class. E.g. If Animal is a class, A cat
can be an object of that class .
With respect to code, Object refers to a set of services ( methods /
attributes ) and can contain data
What are classes ?
A class defines the properties of an object. A class can be instantiated
as many number of times
Advantages of Object Orientated approach
Easier to understand when the system is complex
Easy to make changes
Encapsulation - Can restrict the visibility of the data ( Restrict the access to the data )
Polymorphism - Identically named methods behave differently in different classes
Inheritance - You can use an existing class to define a new class
Polymorphism and inheritance lead to code reuse
Have a look at these good links for OO ABAP-
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
Hope this helps
if it helped, you can acknowledge the same by rewarding
regards
ankit

ABAP or ABAP+JAVA in Solman Installation?

Hi,
We are going to implement Solution Manager 7 (SR3).
1. I would like to ask whats the best installation variant in installing solution manager? (ABAP or ABAP+ JAVA)
2. What are the additional capabilities of SolMan if we install ABAP+JAVA and not ABAP only?
We are planning on using solution manager for:
- Central Administration
- Change request management
- Root Cause Analysis
- Delivery of SAP support service
Thanks,
Roel

Dear
Solution Manager has to have ABAP+JAVA stack so your choice is easy.
Solution Manager Java Stack offers additional functionality as well as tools.
For example Solution Manager Diagnostics.
Kind regards
Tom

AD replication issue. had 1722 error after running repadmin

Hi,
I got 1722 error ( The RPC server is unavailable) when I run repadmin /replsummary. The result points that one source DSA is having 1722 error and the problem DC is the DC I run repadmin command from.
Do it make sense. Why DC itself cannot rpc to itself?
Thanks
Qing

I would start with what is mentioned in this Wiki article: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
That should be a good start for troubleshooting.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Replication issue between lync 2010 FE and lync 2013 FE

Hello
I face any issue in my lync server's .
I was in the last steps in the migration process from lync 2010 to 2013 enterprise edition .
where CMS was moved already to 2013 , and later on many time I checked the replication and it was fine , then I deleted the CMS DB FROM 2010 FE and I checked the replication and it was fine .
later on I proceed to delete the archiving server and monitoring server and it was fine .
later on I proceed to
Reset call admission control
Prevent sessions for services
Stop Lync Server 2010 services
Remove a Front End Server from a pool
I just I face this replication issue after I start the process to delete the lync 2010 pool which im stuck on it now .
one more thing while I was trying to delete the 2010 front end pool , I got the error .
Error: An error occurred: "System.InvalidOperationException" "Cannot publish topology changes. Conference directories still exist on a pool that would be deleted. Remove the conference directories before continuing."
so I moved the conference directories from 2010 pool to the 2013 pool successfully.
but later on when I check the replication I notice the replication issue ?
Get-CsManagementStoreReplicationStatus
UpToDate           : False         """""""""""""""""""it is already shutdown
ReplicaFqdn        : HQ-EDGE01.mydom
LastStatusReport   :
LastUpdateCreation : 3/23/2015 11:22:17 AM
ProductVersion     :
UpToDate           : True
ReplicaFqdn        : HQ-LYNC2013-FE.mydom
LastStatusReport   : 3/19/2015 5:21:27 PM
LastUpdateCreation : 3/19/2015 5:21:25 PM
ProductVersion     : 5.0.8308.556
UpToDate           : False
ReplicaFqdn        : HQ-LYNC-FE-01.mydom
LastStatusReport   : 3/19/2015 11:38:25 AM
LastUpdateCreation : 3/23/2015 11:52:17 AM
ProductVersion     : 4.0.7577.0
then I run the
I run Invoke-CsManagementStoreReplication
Get-CsManagementStoreReplicationStatus
UpToDate           : False     """""""""""""""""""it is already shutdown """"""""""""""""""
ReplicaFqdn        : HQ-EDGE01.mydomain
LastStatusReport   :
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     :
UpToDate           : True
ReplicaFqdn        : HQ-LYNC2013-FE.mydomain
LastStatusReport   : 3/23/2015 10:18:26 PM
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     : 5.0.8308.556
UpToDate           : False
ReplicaFqdn        : HQ-LYNC-FE-01.mydomain
LastStatusReport   : 3/19/2015 11:38:25 AM
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     : 4.0.7577.0
====================
Get-CsManagementStoreReplicationStatus
UpToDate           : False """"""""""""""" it is already down """""""""""""""""""""
ReplicaFqdn        : HQ-EDGE01.mydomain
LastStatusReport   :
LastUpdateCreation : 3/23/2015 10:53:23 PM
ProductVersion     :
UpToDate           : True
ReplicaFqdn        : HQ-LYNC2013-FE.mydomain
LastStatusReport   : 3/23/2015 10:18:26 PM
LastUpdateCreation : 3/23/2015 10:18:22 PM
ProductVersion     : 5.0.8308.556
UpToDate           : False
ReplicaFqdn        : HQ-LYNC-FE-01.mydomain
LastStatusReport   : 3/19/2015 11:38:25 AM
LastUpdateCreation : 3/23/2015 10:53:23 PM
ProductVersion     : 4.0.7577.0
why LastUpdateCreation : 3/23/2015 10:53:23 PM from the lync 2010 pool ????
I'm not doing any change on 2010 pool now (I just try to delete it ) , all the change it is on 2013 pool .
for edge server 2013 I shut down the server since there is another configuration issue there (so replication to edge server not the issue now since it is down).
my question is this will affect my lync 2013 since it is the production now ? is this un completed steps for removing the 2010 pool affect my production.
is the replication issue affects my 2013 pool ?
Kind Regards
MK

Hi,
From your description above, did you mean before deleting the Lync Server 2010 Pool from topology, you found the replication of Lync 2010 FE Server not update to date?
If it is the case, based on my knowledge, there is no affect for Lync Server 2013 Pool. Please double check if Lync Server 2013 Pool work normally, and Lync users in Lync 2013 Pool can use all Lync function without issues. Then you can delete Lync 2010 Pool
from Topology and publish it. After finish it, please re-run step 2 on Lync Server 2013 FE Servers.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

DC Replication issue

Hello Team,
We have built a new Domain Controller in our environment with OS 2003 Server.
While checking for replication from an existing server (using the command repadmin /replsummary) I get and an as below:
1753 - NLHAAAHDC002
(NLHAAAHDC002 is the DC name that is built new)
Also if I run the same command on the new server (NLHAAAHDC002) I get the error that as below:
"'repadmin' is not recognized as an internal or external command,
operable program or batch file".
An urgent response is appreciated.
Regards,
Suman Rout

Hi Suman,
Please refer the below link on Microsoft KB article for Troubleshooting steps - DC Replication issue,
http://support.microsoft.com/kb/2089874/en-us
Regards,
Gopi
JiJi
Technologies

Message flow in SAP PI 7.31 JAVA only for ABAP Proxy synchronous scenario with Oracle DB

Dear Experts,
I am working on a synchronous scenario Sender ABAP Proxy <===> SAP PI 7.31 JAVA only <===> Oracle Database.I have successfully
configured all the proxy configurations as well both Sender SOAP and JDBC receiver channels are showing no error when pinged from
Cc monitoring in NWA.
1.During testing at Tx SPROXY , I am triggering a message and after 5 minutes I receive an PARSING error message with 2 messages in ECC
local IE i.e. Tx SXMB_MONI.
Note : In NWA , I can see only 1 message that too in cancelled status.
2.Seeing the trace of the messages I assume that the messages have not moved from sender ECC system. I am still confused with flow of message
from the Message Audit log. Audit log of error messages.Could any one share the full Audit log of a successful message generated in SAP PI 7.31 JAVA only.
3.I observed that the QIN Scheduler status in ECC is in INACTIVE status. There is no queue id for 2 messages generated in ECC. Does
it should in ACTIVE status in Tx SMQR..
Regards
Rebecca

Hi Thomas,
Valuable inputs..
1. Since I don't have any audit log for successful message, would you be able to share referring to the
below screenshot whether the message was put into receiver JDBC adapter and JDBC adapter tried to retrieve the Select response from Oracle Database.
2.I have done some setting in Advance mode of the receiver JDBC to increase the time out and other parameters as per SAP note but still the issue is same. If you perhaps have some experience in such scenarios, please share some input so that I can ask the Oracle Database administrator exactly what is required from our side.
3.Regarding the slow response from Oracle , there was some suggestion that the datatype of the request and response should match the column name of the Oracle database. I did that.. Do you have any more suggestion that may be hampering the generation of the response message from the Oracle like SAP note or document.
Regards
Rebecca

Replication issue in ABAP to ABAP scenario

Similar Messages

Maybe you are looking for