Objects in a cube: Does it matter whether selected from ODS or infocatalogu

Hi,
Objects in a cube: Does it matter whether selected from ODS or infocatalogue?
When creating a cube, you have the option to select the char and key figures directly from ODSes feeding the cube or from the infocatalogue where the objects originally existed.
Does it make a different, which of these 2 places you select the objects from for the cube?
Thanks

hi Amanda,
it makes no difference, it doesn't matter.
the ods/infoobject catalog just serve as template where we can choose infoobjects to be included in infocube.
later in bi 7.0, we can directly type in infoobject technical name, like in ODS.
hope this helps.

Similar Messages

In Yahoo Mail, when composing an email I get an "Asking to leave this page" panel; it does not matter whether i choose stay or leave, the panel pops up again....and again...the only way out is to Force Quite Firefox and start all over...help please...

In Yahoo Mail, when composing an email I get an "Asking to leave this page" panel; it does not matter whether i choose stay or leave, the panel pops up again....and again...the only way out is to Force Quite Firefox and start all over...help please...

Thanks for responding....but isn't your potential solution designed for Windows users? I have a Mac.
If it does apply to Mac, I am also hoping for something simpler as this could take weeks to isolate the problem and it would be more efficient to use another browser for mail
Also, I should have added, this problem occurs only occasionally and seemingly only when I am taking some time to compose a message

After an update a week or two ago my iphone5 began to go off the correct time. This happens at night. It does not matter whether it is on the charger or not. I have OS6.0.1(10A525), Verizon network, a white 16Gig iPhone.

So again...I have a 16G white iphone 5. It kept good time when I first got it. Then after an update to the ios about 2 weeks ago... it started to lose time at night. It's set for 10AM and doesn't go off until about 30 to 40 minutes later. It only seems to lose time at night. It doesn't matter whether it is being charged or not. I have the white iphone 5, 6.0.1 (10A525), 16G, Verizon network, Washington state. I have had Verizon coverage for aver 10 years and never had this problem before the latest upgrade to my iphone5.
I did remove the other world clocks thinking that might help but it did not.
Any suggestions?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

SSMS is not listing table and views objects though the objects are listed when I execute TSql string "SELECT * FROM sys.Tables"

I have a db, call it xyz.mdb
It suddenly is that SSMS is not listing the table objects nor the Views. SELECT * FROM sys.Tables and SELECT * FROM sys.Views work very fine. But when I click on the tables node, on Objects Explorer, Only the Systems Tables and File Tables folders
show.
Other DBs on same SQL instance do not show same problem. They are all working very fine.
I have backed up and restored this db on other computers and the behaviour is the same. Incidentally right-clicking the db and clicking Properties throws up this error message.
-------------------------------------------------------------------------Error!
Cannot show requested dialog.
Property Size is not available for Database '[Pliny E DB - NOA 2014]'. This property may not exist for this object, or may not be retrievable due to insufficient access rights. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.0.3000.0+((SQL11_PCU_Main).121019-1325+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.PropertyCannotBeRetrievedExceptionText&EvtID=Size&LinkId=20476
--------------------------------------------------------------------------------End>
When I try to Refrresh the Tables node on Object Explorer, I get this other:
------------------------------Error!
SQL Server detected a logical consistency-based I/O error: incorrect checksum (expected: 0x9090d9b7; actual: 0x909001b4). It occurred during a read of page (1:1173) in database ID 21 at offset 0x0000000092a000 in file 'c:\Databases\Clients\NOA\Pliny E DB -
NOA 2014.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check
(DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. (Microsoft SQL Server, Error: 824)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=824&LinkId=20476
------------------------------End>
The Help link of course is not valid any more.
Many thanks
Vie
@Abuja
Vie

Your database is corrupted and you need to run.
DBCC CHECKDB
You already have a backup so do it...
This link will provide you with more information:
http://msdn.microsoft.com/en-us/library/ms176064.aspx

I have the newest update for the iphone 4s i can do everything on it except doenload apps. It does nt matter whether im on wifi ir 3g. The apps will show up and then say unable to doenload at this time? Any fixes yall have in mind? Thanks

Need help guys

Hello Hella80,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
You may want to review the information under the heading "How to reset."
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Detail region does not refresh when selecting from a drop-down list in master region

I am using DW CS3 and have updated to version 1.6.1 of Spry. Using an XML dataset, I am able to create a Spry table as the master region that links to a detail region that displays a small JPG graphic. It works fine in this format (clicking on a row displays the correct graphic). However, my table has 80 rows and requires the user to do too much scrolling. So I changed the master region to a drop-down repeat list, but the graphic does not change when a new selection is made in the drop down list. Listed below is the code produced when I used the insert Spry Repeat List. I got the same results when adding a spry:setrow="dsChartNurse". I also tried -- onclick="dsChartNurse.setCurrentRow('{ds_RowID}');" -- which again made no difference.
When I removed children from the spry:repeat, the master region displayed as a two column list of all 80 items in a drop-down list format.
<div spry:region="dsChartNurse">
       <select name="select" spry:repeatchildren="dsChartNurse">
         <option value="{name}">{name}</option>
       </select>
</div>
<div id="image" spry:detailregion="dsChartNurse">
   <img src="{dataimage}" align="center" style="margin:50px 0 0 0"width="320" height="164" />
</div>
Thanks so much to anyone who can help correct my code in order to have a drop-down list display information correctly in the detail region.

Thanks for the quick reply. I did solve the problem I was having by changing from onclick to onchange in the master region. But, now I have another problem with, of course, IE. I just put in online at http://www.minursemap.org/ageDistNurse.html. When opened in IE, the drop down list displays the last entry, but the image is for the first in the list. Thanks again for your help.

Add-ons window does not appear when selected from Tools/Addons unless new tab opened first

Addons window does not open when Tools/Addons selected, unless New Tab (blank) selected first. Is there a fix, or is this a bug
== This happened ==
Every time Firefox opened
== upgraded to 3.0

This is an issue with one of your add-ons, Mr Tech Toolkit, it is a known problem but I know of no fix, though there are some workarounds.
In the Mr Tech Toolkit options, on the "Manager Hacks > Behaviour" section, you will have "Select Window Target" set to "New Tab". A workaround is to change it to "New Window"
Another workaround is to use a bookmark to open the add-ons manager in a tab. Create a bookmark with the following location:
chrome://mozapps/content/extensions/extensions.xul

Why does my ipod download selections from my library twice?

When downloading selections from my ipod some of the selections were downloaded twice. When I look in my devices menu it is only there once. I have even deleted the selections from my devices menu but it still remains on my ipod twice.

Maybe your Internet Service Provider shuts down some server at 9pm every day.

Does this mean whether the IPOD's battery or hard drive is dead?

Hi there,
My IPOD Photo when plugged into the AC adapter charger, will show the same three screens again and again
(1) Black Screen with Apple Logo
(2) Sad IPOD icon
(3) Battery icon (looks like a low-battery icon) with exclamation point
I have tried the 5Rs procedure on this site to put the IPOD in disk mode but to no avail.
This IPOD is only 2 years old and has been in great condition. Does the above mean that its hard drive or battery is dead? Or both?
Thanks

Does the above mean that its hard drive or battery is dead? Or both?
It could either be
a. The battery is dead (normally it should work around 18 months), the low battery level caused the Head of the HD of your iPod get frozen.
b. The iPod does not get charged at all due to hardware/software problem.
Have a read of the following
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

ODS objects and Info-cubes

Could someone clarify my understanding of the difference between ODS and basic cubes?
My understanding is that the ODS is updated from R/3 and is a flat structure, or a basic database which is write-optimised. The data in the ODS is then updated into the info-cube at a more summarised level.
The info-cube provides enhanced reporting capability because it is structured as a star-schema which introduces additional dimenions (via the dimension tables) to enrich the contents of the fact table.
Does the ODS update both fact table and dimension table in the star schema?
Many thanks,
Frederick

Hi Frederick,
If that doesn't solve your concern... then go ahead
1.ODS is a two dimensional object
2.ODS is a datastore where you can store data at a very granular level.
3.Technically there is the option to overwrite or add single records.
4.ODS can be used for detailed level of reporting( same as in r/3),
(cube can be used for aggregate level of reporting.)
5.ODS are used to consolidate data
1.Whereas cube is a based on multidimensional modeling which facilitates reporting on diff dimensions.
2.The data is stored in an aggregated form unlike ODS and have no overwriting capability.
3. Reporting and analysis can be done on multidimensions unlike on ODS
4. InfoCubes are optimized for reporting
5. There are options to improve performance like aggregates and compression.
5. It is not possible to replace single records, all records sent to InfoCube will be added up.
You may get a doubt why first load to ODS and then to Infocube, the strategy of adding ODS
in dataflow is termed as addtion of EDW(Enterprise Datawarehouse) layer which will allow
us to retrieve data within BW if at all some thing goes wrong & we lose data from InfoCube.
We can get the data from ODS itselft into cube without going to the source sytem again.
Please search SDN & you will get a lot of docs on this:
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=infocubeODSdifferences&adv=false&sortby=cm_rnd_rankvalue
Re: ods vs infocube
ODS and Infocube..
Difference between InfoCube and ODS Object
ODS and Cube
use of ODS
Cheers,
Habeeb

Number range object for characterstic DATE does not exist

When I am trying to load data from ODS to cube getting below error message.
"Number range object for characterstic ZEXTDATE(Source extract date) does not exist".
In update rules we are trying to convert this date Infoobject(Char) into Key figure.
If anyone had exp with similar issue please reply.
Thanks in advance
Vani

Hi Vani,
Is ZEXTDATE Characteristic have any data in it? Can you check once.
Veerendra.

How to assign authorization objects to a cube

Hello,
My cube includes 0profit_ctr which is marked as authorization relevant. Still in RSSM my cube is not included in the list of infocubes for an authorization object (zprofit) linked to 0profit_ctr. I'm therefore not able to enable that authorization object for my cube. I have a few ODSs which are included in the list. Why is my cube missing? Is there something I must do to include it, or is it a bug?
When checking the infocube for authorization objects in RSSM this list is empty as well. I don't see any option to add authorization objects in that list.
I have read the following document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b849e690-0201-0010-9b88-c00cca40736f
I'm using BW 3.5.
Regards,
Christoffer

Hi Christoffer,
In RSSM you will find a button "Update Check Status ( Authorization Objects, Info providers) ". After this update you should find your cube in the list.
Jaya

Adding new info object to a cube.

Hi Friends,
This is a BI SYSTEM, we have a cube with existing data in it. Now we need to add a new info object to the dimension of the cube.
Now we can add the info object to the cube in 2 ways.
1. remodeling the cube
2. select the cube in RSA1 , RIGHT CLICK, IN CHANGE MODE add the info object to the dimension of the cube.
now my question is why we have the concept of remodeling, when we were able to add the info objects to the dimensions of the cube in the change mode.
kindly explain me in detail.
thanks.
Please search the forum
Edited by: Pravender on Mar 16, 2011 2:58 PM

Hi Soumya,
If you go by option 2 of adding Infoobject in Cube by going in change mode and adding the respective Infoobject in Dimension,
Then you have to delete Data first from the Infocube in order to add infoobject by this option. Otherwise it won't allow you to add infoobject.
But by remodelling option you can add the infoobject in dimension without deleting any data from Cube. But this option has its own limitations too.
Please refer the following link for Remodelling Concept:-
http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/content.htm
Hope it helps.
Regards,
Hardik

Cube does not get refreshed after maitainence

Hi
I have a cube in a schema that was existing.
I have added new data to the fact table that is mapped to the cube.
I maintained the cube by using the complete refresh option in the analytical workspace manager.
After maintaining the cube and selecting from the cube view I do not see the new data that I have added.
I have even tried dropping and recreating the cube but still it does not work.
I have also tried adding the clean step for all measures and yet it does not work.
Creating the cube with a different view name is a solution but that is not what I want. I want to be able to refresh the same view.
Please advise / suggest
Edited by: CelestialCitizen on Sep 4, 2011 9:53 PM

Hi All
The above is a false alarm.
Basically it turned out that one of the keys in the fact table was not a leaf node in the dimension.
After rectifying that all works fine now.

[Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
After some checking I found out that the latest added node was giving problems.
VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
In the other there were no VM's on the node so suspending went fine.
What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
A reboot resolves the problem, but only for about a week.
I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
No waiting at all.
The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

Hi,
Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
disabled the HP NIC team service from services and restarted the WMI service.
The related third party information:
Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Objects in a cube: Does it matter whether selected from ODS or infocatalogu

Similar Messages

Maybe you are looking for