Number range object for characterstic DATE does not exist

When I am trying to load data from ODS to cube getting below error message.
"Number range object for characterstic ZEXTDATE(Source extract date) does not exist".
In update rules we are trying to convert this date Infoobject(Char) into Key figure.
If anyone had exp with similar issue please reply.
Thanks in advance
Vani

Hi Vani,
Is ZEXTDATE Characteristic have any data in it? Can you check once.
Veerendra.

Similar Messages

Stock for required data does not exist during repack of product

Hello,
I have the given situation, during the packing of a product (which is unpacked) in the Work Center I get the following error message:
"Stock for required data does not exist
Message no. /SCWM/L3104"
After a debugging session we have found the cause as being the field FLGAVQ (Indicator: Handling Unit Contains an Available Quantity) in the structure /SCWM/S_HUHDR_INT. My question is if somebody knows from where this mark comes and if you stumbled on the same problem and if so how did you manage?
All the best,
Claudiu Maxim

Hello Sridhar,
Thanks for the response, the packing operation in our case is done in the SCM EWM environment in the specific Work Center. The transaction with which we pack is /SCWM/PACK - Packing - General. Do you have a solution for this problem with regards to the EWM environment?
All the best,
Claudiu Maxim

ODS Activation Failure due to Number range object for characteristic ZTXLEV

Hi
I am having problem regrdng ODs actvtn failure,I am gettng Error mssge as Number Range Object for Char ZTXLEVAIN doesn't Exist
can anyone help me
thanks
KINDLY SEND MAIL TO [email protected]
srinivas

HI,
check this
Error calling number range object 0MATERIAL for dimension D4 ( )

Number Range Object for a Infoobject

Hi Gurus,
Can anyone explain me what is the significance of Number Range Object for a perticular infoobject and what do you mean by Buffering of those Number Range Object...
Your help will be appreciated..
Thanks a lot in advance..
Thanks,
Shalaka.

Hai Shalaka,
The number range buffer is used to increase performance when assigning
numbers. Instead of fetching the numbers each time from the database,
a single access to the buffer suffices. Only when the buffer is empty,
is it refilled from the database (table NRIV).
Use of the buffer has the following benefits:
· Accessing the main memory is a thousand times quicker than accessing
the database. Speed is particularly important for applications that
assign numbers frequently.
· Database accesses are always subject to the database transaction
mechanism. Once an application has assigned a number for one user, a
second user cannot assign a number until the first user has executed a
commit operation on the database. The application blocks further
assignment, and the second user has to wait, until the commit has been
executed.
· The number range buffer can also prevent deadlock situations, which
may arise from assigning different numbers in a different order.
Since the SAP kernel accesses table NRIV directly for the number range
buffer, the structure of the table must never be changed. This also
applies when adding new fields.
We can set number range buffering inSNRO t code.
Loading Master data - The number ranges buffer for the SID's resides
on the application server and reduces DB server accesses. If you set
e.g. the number range buffer for one InfoObject to 500, the system
will keep 500 sequential numbers in the memory and need not access the
database.
#####>>> whenever master data loading is done system creates SIDs, &
to create SIDs system look into a specific table, check the latest
number & generate the next no in the series, so to check this latest
no for every time ( every record) system needs to go back to database
table & generate the next no in series. when I do the buffering I
provide the whole series to system at application level so it need not
to go back to table to check the latest no & generate the next one. It
just picks up the next in available on application server.
>>>####
Please refer - SAPnote 130253
Loading Transcation data - The number range buffer for the dimension
ID's resides on the application server and reduces DB server accesses.
For example, if you set the number range buffer for one dimension to
500, the system will keep 500 sequential numbers in memory and need
not access the database
If you load a significant volume of transaction data (e.g., initial
load), increase the number range buffer. If possible, reset it to its
original state after the load in order to minimize unnecessary memory
allocation
Hope this information helps u....
Asign points if helpfull
regards
KP

How to find out the Number range object for Incident number

How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanya

HI, an example.
data: vl_num type i,
 vl_char(6) type c,
 vl_qty type INRI-QUANTITY,
 vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
 NR_RANGE_NR = '01'
 OBJECT = 'ZRG0000001'
 QUANTITY = '1'
SUBOBJECT = ' '
TOYEAR = '0000'
IGNORE_BUFFER = ' '
IMPORTING
 NUMBER = vl_num
 QUANTITY = vl_qty
 RETURNCODE = vl_rc
EXCEPTIONS
 INTERVAL_NOT_FOUND = 1
 NUMBER_RANGE_NOT_INTERN = 2
 OBJECT_NOT_FOUND = 3
 QUANTITY_IS_0 = 4
 QUANTITY_IS_NOT_1 = 5
 INTERVAL_OVERFLOW = 6
 BUFFER_OVERFLOW = 7
 OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard

Maintain number range object for excise grp

Hi Gurus,
During stock transfer, while doing Goods receipt I am getting the below error
"Maintain number range object for object J_1IRG23D, year 2010, excise group"
Could anyone please tell me the trans code for maintaining no range for excise group...
Thanks,
Raja

Go to J1I9 T Code for a particular object object J_1IRG23D, execute and then give the excise group and maintain the number series.
Regards,
Nagesh
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM

Error in MIGO :Number range object for object J_1IINTNUM, year 2010, excise

Dear Experts,
While posting MIGO, System throws below error :
Mainintain number range object for object J_1IINTNUM, year 2010, excise
Maiintain number range object for object J_1IRG23A1, year 2010, excise
Maintain number range object for object J_1IRG23A2, year 2010, excise
Actually we are posting the MIGO for the fiscal year 2009, still i am getting error why ?
regards
rajakarthik.

check the posting date what u r puting , it should be on or before 31/03/2010
i think this is only the issue dont looks like any other issue
or do one thing just o\go in SNRO and for J_1IINTNUM object put 9999 year and the number range
and try to post your transaction in 2009
hope this helps
Edited by: Umakant Bhangale on Apr 1, 2010 10:22 AM

Maintain number range object for object J_1IRG23C1, year 2008, excise

Dear All,
I am doing the purchase cycle for Assets, while doing GR i am getting the below error, pls guide me
Maintain number range object for object J_1IRG23C1, year 2008, excise
Maintain number range object for object J_1IRG23C2, year 2008, excise
B/regds,
CB

Dear CB,
Use Transaction "SNUM", and give the object name as "J_1IRG23C1" and maintain number range for the financial year.
Do the same procedure for Object "J_1IRG23C2" and maintain the number range.
Hope this helps.
Njoy SAP
-Saravanaganesh

Maintain number range object for object J_1IINTNUM

Dear,
While doing GRN i am getting this error:
Maintain number range object for object J_1IINTNUM, year 2009, excise group
Maintain number range object for object J_1IRG23A1, year 2009, excise group E1
Maintain number range object for object J_1IRG23A2, year 2009, excise group E1
What i did is:
1) I maintained NR for Objects J_1IINTNUM, J_1IRG23A1,J_1IRG23A2 in J1I9 Tcode.
Still i am getting the same error in MIGO.
Regards
Utsav
Edited by: Utsav.agra on Nov 18, 2009 12:24 PM

Dear Pankaj,
thanks actually i wans maintaining number as 1 instead of 01.
Thanks
Utsav

Maintain number range object for object J_1IRG23A1, year 2007, excise

Hi All,
I have configured CIN in ECC 5.0. When i am doing MIGO getting errror that "Maintain number range object for object J_1IRG23A1, year 2007, " and
Maintain number range object for object J_1IRG23A2, year 2007, excise group 10
but i have already maintained number range for such object.
please guide me.
Regards,
Ravindra

Hi,
Which Number u given,
No year From number to number
01 2007 1 10000
I think u allready given,this is for checking.
Raghu

Number range Object for Production order Number range profile.

Hi ffriends,
 Can anybody tell me how to maintain the Serial Number Range for production order serial no.
 I working on automatic serail no generation for production order.I have one serial no range profile which I am assigning to material in material master but I don't know the number range object for that profile.
 Or can anybody tell me how we attach serail no profile to a serial no range object.?
 Please it is urgently required..........
Regards,
Rajesh Akarte

hi rajesh
in the serial number profile there are certain business procedures which will create the serial no ,kindly check whether for your procedure you have assinged whether serial number to be arranged or not
slecect the serial number profile in sutomization field( which you have specified in Material master) and select the serialization procedure and check whether the PPRL procedure is assinged,also check the serial no usage assigned
for detailed process have a look here
http://help.sap.com/saphelp_47x200/helpdata/en/3c/abc38a413911d1893d0000e8323c4f/frameset.htm
regards
thyagarajan

Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. Bo

Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

Maintain number range object for object J_1IINTNUM, year 2009, excise group

Hi SAP Guru !
Plz tell me the solutions quickly, Even after mantaining the required Objects in "J1I9" , when I am going to post GR , once again it is saying that ........
1 - >   Maintain number range object for object J_1IINTNUM, year 2009, excise group
       Message no. "4F159" .
2 - > Maintain number range object for object J_1IRG23A1, year 2009, excise group 21
       Message no. 4F159
3 - > Maintain number range object for object J_1IRG23A2, year 2009, excise group 21
        Message no. 4F159
Regards,
San

dear sir
while maintain number range , in the number column, it should be 01. other than 01, you will get same error.
so please check it should be 01 in the number column and year and number range interval .
regards
jrp

Error "Account assignment 00 for purchase document does not exist " when u

Hai,
I am encountering the following problem when posting a PO based Invoice using BAPI_INCOMINGINVOICE_CREATE.
The error says " account assignment 00 for purchasing document does not exist".
The scenario is very simple. I need to raise an Invoice against a PO. the PO has a single line item of quantity 10 net price 10. Tax code is U2 ( 7% tax).
I am passing the following at header level.
Invoice_indicator ( as 'X'),company code,doc date , posting date, gross amount (107, currency USD, calc tax indicator as 'X'.
At line item i am passing Invoice document item 000001, po number , po item number, tax code(U2) item amount (100),
Does this error has got any thing to relate configuration matters?
Regards,
Upender

Hi Upender,
In some cases, depending on the type of PO / Posting,
you might have to populate the accounting data itab and pass in the BAPI parameter.
you can select the accounting data from EKKN for the PO.
Again it depends on the PO category, wether you need to populate Qty & Unit in accounting data.
Further, the accounting data should be exactly the same as there in EKKN ( all the fields except Qty & Unit ).
Thanks,
Ram

ORA-04043: object SYS.DELTA$SESSION does not exist

Dear Friends
after I import my data by using the follwoing import script :
IMP JCC/P_MANUF FILE =JCC.DMP FULL
and at the end give this message import has been imported succesfully without warning
then when I use this script :
SQL> SELECT TNAME FROM TAB
2 WHERE TNAME LIKE 'USER_SESSION'
3 /
TNAME
USER_SESSION
The table USER_SESSION is exist but when I try to desplay the structure of the USER_SESSION by using this :
SQL> DESC USER_SESSION
ERROR:
ORA-04043: object SYS.DELTA$SESSION does not exist
and when I try to use the select statment as the following
SELECT * FROM USER_SESSION
ERROR at line 1:
ORA-00980: synonym translation is no longer valid
Waiting for your valuable answer.
Best regards
Jamil Alshaibani

SQL> select * from V$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Linux: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL> !uname -a
Linux KAD-VMWARE 2.6.9-55.ELsmp #1 SMP Fri Apr 20 16:36:54 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
SQL> sho user
USER is "SYS"
SQL> select object_type,status from dba_objects where object_name = 'K_DRWDWN_GRP' and OWNER = 'SYS';
no rows selected
Is any thing wrong with my dictionary? please let me know if i missed anything?
Edited by: sanora600 on Oct 16, 2010 12:34 AM

Number range object for characterstic DATE does not exist

Similar Messages

Maybe you are looking for