Obsolete control data in eCATT

Hello All,
I am getting the error message
'<b> Control data is obsolete, rerecord (VERBS-NAME: CreateObject CATT: <none>
Callno: 000001)'</b> while executing the eCATT script. Could any one clarify what could be the possible reasons. I recorded the transaction using TCD mode.
Thank you in advance.
--Venkat

Hello Venkat
I cannot tell you the error cause yet I have experienced this error message too while recording a simple dialog transaction (like CG3Y).
I am not sure if this is a bug in eCATT (at SAP release 6.40) or somehow releated to the SAPGUI release (patch level) on the presentation server (i.e. the local PC).
Perhaps you could overcome this recurring problem using a different recording pattern.
Regards
Uwe

Similar Messages

CATT ECC6.0 Control data is obsolete

The catt I use was created in 4.6c. Since the upgrade at ECC6.0, it displays the message after each running :
"Control data is obsolete, rerecord (VERBS-NAME: CREATEOBJECT CATT: create)
Error ATT377 in application transaction IW24
Message no. TT350
Can you please tell me why does this error occur and how to correct it.
Please suggest what should be done to avoid this error.
Your suggestions will be of great help for me.
Abdes.
Edited by: RACHID ABDESSAMAD on Nov 26, 2008 3:11 PM
Edited by: RACHID ABDESSAMAD on Nov 26, 2008 3:23 PM

HI Rachid,
I would assume you are using TCD command to record your transaction. Sometimes due to some controls like ALV, a TCD command would fail in the eCATT. Hence there are two options:
1. Rerecord your transaction with TCD. This might solve your problem, but it can also happen that it does not help at all because of those controls on the UI.
2. Record your transaction use SAPGUI command. SAPGUI command can handle controls much better. Hence your problem should be solved completely.
Additionally, for option 1, if you have got such an error and your data can still be created correctly, then you can use MESSAGE...ENDMESSAGE to 'allow' the error message of 'ATT 377 Control Data is obsolete'. But in this case, it would be necessary to check in the database to make sure that the data is really created. Otherwise, your eCATT would run with green traffic light, but actually there is an error.
Kind Regards, Qian

Control data is obsolete, rerecord (VERBS-NAME: CreateObject CATT

Hello experts,
To create factory calendar holiday(t-code SCAL), I use t-code secatt for the purpose.
But when running the test configuration script, I face the following error
Error in eCATT command TCD SCAL
Message no. ECATT507
Control data is obsolete, rerecord (VERBS-NAME: CreateObject CATT: <none> Callno: 000001)
Message no. TT377
I use a tab separated text file with numbering of records.
I read on this forum some topics about the error but it doesn't solve the issue.
Please suggest what should be done to avoid this error
Thanks in advance for your reply.

thanks AP for your reply.
I have deleted and I have recreated the file with new recording but the error still ramains.
Can anybody assist to solve the issue ?
Thanks in advance.

Error in SECATT - ATT 377 Control data is obsolete, rerecord (&1&2&3)

Hello,
I get an error while running a TCD REC secatt, in the log of the test configuration , there are red errors "ATT 377 Control data is obsolete, rerecord (&1&2&3)", although the secatt was sucessfully done (meaning i should get green light...).
I've implemented Note #965439, in order to solve this error.
but the error still occurs.
Any ideas...?

thanks AP for your reply.
I have deleted and I have recreated the file with new recording but the error still ramains.
Can anybody assist to solve the issue ?
Thanks in advance.

How to modify changes of table control data in PAI

I have a table control where the columns are brought by dict fields.I am able to bring data into table control through an itab.
Now what i want is whenever user edits data in table control and clicks on save button the corresponding changes should be made in database.
For this according to my understanding we need to (in PAI) modify the changes in itab from the table control and then in SY-UCOMM of SAVE button we need to update in database table using itab.
For this , I am not able to write code for modifying the changes in itab from table control. Here is my code below.Please tell me how to do this.
PROCESS BEFORE OUTPUT.
MODULE FILL_DATA.
LOOP AT ITAB INTO ZEMPLOYEE_MASTER WITH CONTROL EMPTABLE CURSOR
EMPTABLE-CURRENT_LINE.
ENDLOOP.
MODULE STATUS_0001.
PROCESS AFTER INPUT.
LOOP AT ITAB.
   MODULE MODIFY_ITAB.
ENDLOOP.
MODULE USER_COMMAND_0001.
REPORT ZDATA_FORM1.
TABLES: ZEMPLOYEE_MASTER.
CONTROLS EMPTABLE TYPE TABLEVIEW USING SCREEN 0001.
data: begin of itab occurs 0,
       emp_no like zemployee_master-emp_no,
       name like zemployee_master-name,
       city like zemployee_master-city,
      end of itab,
      rowno TYPE I VALUE 1.
*&      Module STATUS_0001 OUTPUT
*       text
MODULE STATUS_0001 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0001 OUTPUT
*&      Module USER_COMMAND_0001 INPUT
*       text
MODULE USER_COMMAND_0001 INPUT.
MESSAGE 'Inside INPUT' TYPE 'I'.
CASE SY-UCOMM.
   WHEN 'SAVE'.
     UPDATE zemployee_master.
   WHEN 'EXIT'.
     LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0001 INPUT
*&      Module fill_data OUTPUT
*       text
MODULE fill_data OUTPUT.
select emp_no name city from zemployee_master into TABLE itab ORDER BY emp_no.
Describe table itab lines EMPTABLE-LINES.
ENDMODULE.                 " fill_data OUTPUT
*&      Module modify_itab INPUT
*       text
MODULE modify_itab INPUT.
* MODIFY itab from zemployee_master index
* MESSAGE 'Inside modify_itab' TYPE 'I'.
ENDMODULE.                 " modify_itab INPUT

Hi
In the following module of your code
MODULE modify_itab INPUT.
MODIFY itab from zemployee_master index tc-current_line " Where TC is the name of the Table control on the Screen
ENDMODULE.
Table control data gets refreshed on *enter*
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2165e990-0201-0010-5cbb-b5c2ad436140
Cheerz
Ramchander Rao.K

Keynote storing obsolete format data, and possible connection to crashes

An “Ah ha!” moment with Keynote leading to a question about how it stores information regarding themes and fonts, and whether this is a bug in Keynote and/or if there is something that end users can do as a work-around. These points came to my attention today when I exported from Keynote to PowerPoint to share a (very inferior ) version of my presentation with a colleague. Note that the Keynote file I exported from has not exhibited any problems related to error messages or crashes.
(1) Prior to making the export, I changed all slides to Keynote’s standard out-of-the-box “Gradient” theme since I had used Keynote Theme Park animated “Global Cool” theme (www.keynotethemepark.com). However, even though no slide any longer contained the KTP theme, in doing the export Keynote created a media folder of movies that contained the animated KTP theme. So Keynote is apparently storing obsolete file data and not cleaning up its house after the file is changed.
(2) Prior to making the export, I changed all slides to use only fonts that I knew to be on my colleague’s PC. However, when I looked under the “Contents” tab of the resulting Powerpoint file’s “Properties” info, I discovered that Powerpoint was listing all the fonts that had been in the original Keynote file but that I had long since changed to Arial and Arial Narrow. Checking through the Powerpoint file slide by slide confirmed that the original fonts do not appear. Again, it appears that Keynote is storing obsolete information.
MY QUESTION: I am wondering if what I discovered today about Keynote’s “elephant memory” is indicating a bug of some sort, and if so, is there a reasonable work-around for end users that will enable us to avoid having files bloated with obsolete data.
Also, I am wondering if this storing of obsolete file data could be related to the ”missing file” error reports and Keynote crashes that others have noted in this forum and that I addressed in my previous post. The solution I had discovered was a file level work-around, but the question remained as to what had brought it on.
BTW, this is with Keynote 3.0.0 because I reinstalled Keynote recently thinking that this procedure might resolve the crashing problem described in my previous post to this forum; the reinstall didn’t, but the problem was solved at a file level in the manner described in my previous post. Now that I finally have time tonight to upgrade again to Keynote 3.02, when I run Software Update expecting to see the Keynote 3.02 upgrade listed, it’s not there. Hmmmmm.… I know I can get it from Apple’s download site but since the site lists two downloads (3.0.1v2 and 3.0.2), I thought it’d be better to let software update manage this process. Now I’m not so sure.

Thanks, dook and Kyn. Not only does that seem to resolve the issues, but deleting unused master slides dramatically drops the size of the exported presentation (e.g. to 20%).
I wish the Apple Keynote team would provide a way to more intelligently delete unused themes so as to make it easier to email presentations. It seems to me that theere should be a setting available in the export process where one could do this. The only way I could see to do it was one master slide at a time. Please tell me if I am missing something here.
I also wish we could export just a range of slides, e.g. from # to #, or slides selected in the Navigator/sorter/organizer.

Data Origin Types not filled in the tab "Control Data" of BP interface

Hello experts,
I have loaded the clients from ECC6.0 to CRM 4.0.
Before I have loaded the clients I have maintained the data origin type for the BP in spro -> cross application components -> SAP Business Partner -> Business partner -> Basic settings -> Data Origin -> Maintain Data Origin Type.
After I have done the load initial of clients, the field "Data Origin" is empty in the tab "Control Data" in BP interface. If I do F4 in the field appear the configuration that I did in spro appear.
For this field will appear filled I'll need to do more configurations in spro?
Best regards,
Mary

Hi Mary,
The middleware does not fill this field in BP master data. You can maintain data origin type in SPRO, however the mBdoc does not use this customizing in order to fill this field.
Please try to use the BADI CRM_DATAEXCHG_BADI in order to fill this field during master data download.
It hope it helps.
Regards,
Gabriel Santana

Hi In ALE ,IDOC HOW CONTROL DATA IS TRANSFERRED

Hi Experts,
Hi In ALE ,IDOC HOW CONTROL DATA IS TRANSFERRED .
Thanks & Regards
Bhaskar Rao.M

Hi Bhaskar Rao,
Good Check out the following documentation.
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1230385,00.html
Some good links on ALE/IDOC
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
Please check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Also check this links for additional information.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
Good Luck and thanks
AK

Control data for storage type is missing Message no. L3006

Dear Mates
i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
Control data for storage type is missing
Message no. L3006
i have explored every thread regarding the same issue and also implemented some measures like
-> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
-> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
but still i am getting the same message in LT03
can you please help me out on this.

Please take a look at the following links and see if they will help at all.
Error on creating a TO - Control data for storage type is missing
"control data for storage type is missing"
Kind Regards,
Jason

"control data for storage type is missing"

Hi Guys
I am trying to create a goods receipt for an inbound delivery.
I created the inbound delivery VL31N - sucessfully
But when trying to create a putaway LT0F - error
control data for storage type is missing. msg no. L3006
Do i maiantain this control data for storage type in the Material master?
is there anything Im doing wrong?
Can someone help please.
Thanks in advance for the help.
Ahmad Yahya

Hi,
Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
Regards,
Prabu

Control data in VENDOR MASTER..?

hi gurus
Can can anybody explain me about the how many views are there in vendor master like (material master-28 views).
In Control data , what is the use of --- GR based IV..?
Please explain me clearly
Thanks in advance
sap-mm

Hi,
We can do MIRO(Invoice before GR) by deselecting the GR based IV block.
We normally use it in case of Import process where we have to clear planned delivery cost(Customs duty,transportation charges) & then do the GR.
But in domestic procurement, if we do IV without GR, we will not be able to get proper PO history.
Hope this will solve your query.
Reward if useful.
Regards,
Piyush

Price Control Date as GR Date in Purchase Order?

Hello Friends.
We have a requirement where we need to take the price at the time of GR. I have tried to set the Price control date as GR date (5) in Purchase order, Info Record and even in Vendor Master. Unfortunately, it is always taking the price as P.O. price and it is not taking the price which changes between P.O. Release and GR date.
I made several P.O.'s and did GR for the same with less quantity. Then i made changes in the Inforecords and again did GR for the same P.O. It took the price from the P.O. only. Albeit I set the Price determination date as GR Date in P.O., Inforecord and vendor master too. We have requirement of not changing the P.O. once it is created and we dont want to change the price in P.O. once we do one GR for a particular P.O.. We need to re-determine the price at the time of GR without changing the price in P.O. as it require several authorizations.
I need to know if I am missing any setting in P.O., Info-record, Vendor master or any changes required in customizing. Or I need to install any enhancement package for the same.
This is a very critical requirement and hence request MM consultants to provide their valuable inputs.
Regards
Gurcharan

how did you test? did you always create new POs after your changes in master data? Or did you just expect that the existing PO would automatically get to know about such changes?
Was the existing PO price found from the info record? Can you proof that from the analysis in the condition tab?

How to Add 15 Days to the current Date in eCATT

Hello eCATT Guru's,
How to add 15 days to the current date in eCATT.
I have changed the Date format to mm/dd/yyyy.
now i want to add 15 days to the sy-datum.
How to do that.do any one know?
Thanks in Advance,
Raj

Check out this link -
http://help.sap.com/saphelp_46c/helpdata/en/d7/e21a50408e11d1896b0000e8322d00/frameset.htm
It gives details about DATE variables in CATT. Hope this will help you out.
ashish
Reward points if you find this helpful.
Message was edited by: Ashish Gundawar

T.code FS00: changing the SORT KEY in the 'Control data'

Hi All,
I need to change the SORT KEY in the 'Control data' of a G/L master data.
Is there a SAP standard program by which the field 'Assignment' is updated.
Thanks
Gandalf

Sorry,
i did't mean updating a field ...
I meant:
is there a program which changes the content of the field 'Assignment' according to the new content of the field 'Sort key'?
Thanks

How to add new row in KL02 trx - Activity type control data

Hi guys.
I am not a FI-CO consultant, but I want to add a row since KL02 transaction within a cost center, with a new fiscal year. When you access KL02 (change activity type), you set the activity type, then press Master Data and the basic screen appears. If you press the Display planning control button, you will see the "Display Activity Type Control Data" List. I wanna add a row for a specific cost center here, because the cost center I refer has not 2011 as fiscal year. I tried to use, since basic screen of KL02, use the Change planning control button, but when I set my cost center and 2011 as fiscal year, the Save button is inactive. Furthermore, I tried to press the Period screen and a message appeared "No data has been entered yet". So I dont know how to add one row for a cost center in the Planning control (Activity type control data) list of the KL02 transaction, specifically for an activity type. Do you know? Thanks in advance

Hi,
The list of cost centers in which the activity type is planned is given in KL02 under planning data. In order to add a new cost center to this, you need to enter the activity type in transaction KP26 for a particular year.
Goto transaction KP26
Give version - 0
from period 1 to 12
year - 2011
cost center - mention the cost center
Activity type - mention activity type
goto overview screen F5 and add the plan price for the activity in the cost center. This step will automatically add new row in the activity type control data.
Hope this helps.
Thanks,
Ram

Obsolete control data in eCATT

Similar Messages

Maybe you are looking for