Obtain message id in receiver

Hello,
generally I'm trying to find out what is a message id for a message sent to given adapter. That is, there is custom adapter which works as receiver/outbound. However, I don't know how to get a message id of the sent message...
Maybe on receiver side something else should be done to get sent message?

You can try this code in one of your Java modules of the custom adapter:
String constant;
java.util.Map map;
map = container.getTransformationParameters();
constant = (String) map.get(StreamTransformationConstants.MESSAGE_ID);
return constant;
Regards,
Ravi

Similar Messages

How can i remove the phone number from the text messages that i receive in the notification center

how can i remove the phone number from the text messages that i receive in the notification center?

You choose whether to see text messages in Notification Center or not. If you elect to see them, they will display the phone number (unless they are from a contact in your contacts list).
You can choose not to see them at Settings > Notification Center > Messages.

When i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it

when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help

Hello Todd:
I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
I hope that this works for you, Todd! ~ Brian

E-mail messages sent, are received not in the paragraph-form as sent, but

Dear Friends,
E-mail messages sent, are received not in the paragraph-form as sent, but are broken-up into small segments, one line finely printed, the next line may appear with just two or three words printed on it, then the next line will show a few words at the end of it, while the next line appears as the start of another paragraph, and so on and on and on. So that the original message, although sent in the one paragraph-form, winds up being received as several paragraphs, each broken up into several segments. My contacting Apple has produced no solution thus far. I am new at this computer business and would greatly appreciate any help you can give me on this score. Thanking you in advance for your interest and kind help.
Yours Truly,
GMS.

Dear Friends,
E-mail messages sent, are received not in the paragraph-form as sent, but are broken-up into small segments, one line finely printed, the next line may appear with two or three words printed on it, then the next line will show a few words at the end of it, while the next line appears as the start of another paragraph, and so on and on and on. So that the original message, although sent in the one paragraph-form, winds up being received as several paragraphs, each broken up into several segments. My contacting Apple has produced no solution thus far. I am new at this computer
business and would greatly appreciate any help you can give me on this score. Thanking you in advance for your interest and kind help.
Yours Truly,
Broduff.

Handling Fault Messages for JDBC Receiver (Syn Inbound)

Dear Freinds,
Can we handle fault messages for JDBC Receiver which is synchronous.
OB Proxy Syn <> IB JDBC Syn
1. How to handle the same ? Please give some examples.
2. Should we use Stored Procedures at Oracle side to handle the fault messages and send back as response to the Proxy Response. Will it work.
Thanks & Regards
K.Ramesh

Dear Friend,
I have 2 interfaces where Proxy is OB & JDBC is IB. In the first interface both sender and Receiver are synchronous and in the second one it is Async.
In the first interface i have to send one field from R/3 table along with Native SQL query string to XI and the response of the SELECT query is sent back to the sender.
Assume if no fields are selected based on the field sent then proper error message has to be sent instead of the response message.
In the second interface i will be using UPDATE query at Asyn JDBC receiver.
How to do this if you are having JDBC Receiver.
I saw in many blogs where they had mentioned that we cannot handle fault messages in the Receiver JDBC.
KIindly explain.
Thanks
K.Ramesh

I am not getting all my txt messages when I look at settings- messages- send and receive my phone number is not checked... how can I change it?

I am not receiving all my txt messages, I think it is because in Setting -> messages -> send and receive, my cell phone number doesnt have a check next to hit. Im not able to check it. any ideas?

Old phone is off and number is fully ported? SIM card new and installed/seated properly? All Apple credentials disabled if coming from iPhone?

How to configure message header in receiver http adapter?

Hi all
I need the outgoing message payload from receiver http adapter to backend system with below form.
POST http://222.222.33.22 /HTTP1.0
content-type:application/x-www-form-urlencoded
USERID=xxxxxx&PASSWORD=xxxx&SRCID=10&CDDATE=20070601...........................................................................
×POST http://222.222.33.22 /HTTP1.0
○content-type:application/x-www-form-urlencoded
○USERID=xxxxxx&PASSWORD=xxxx&SRCID=10&CDDATE=20070601...........................................................................
Is there a parameter to enable POST method as a part of message header outputing?
thanks in advance.

The parameters available in HTTP adapter for message header are:
HeaderFieldFive     http://sap.com/xi/XI/System/HTTP
HeaderFieldFour     http://sap.com/xi/XI/System/HTTP
HeaderFieldOne     http://sap.com/xi/XI/System/HTTP
HeaderFieldSix     http://sap.com/xi/XI/System/HTTP
HeaderFieldThree     http://sap.com/xi/XI/System/HTTP
HeaderFieldTwo     http://sap.com/xi/XI/System/HTTP
HTTPDest     http://sap.com/xi/XI/System/HTTP
TargetURL     http://sap.com/xi/XI/System/HTTP
URLParamFive     http://sap.com/xi/XI/System/HTTP
URLParamFour     http://sap.com/xi/XI/System/HTTP
URLParamOne     http://sap.com/xi/XI/System/HTTP
URLParamSix     http://sap.com/xi/XI/System/HTTP
URLParamThree     http://sap.com/xi/XI/System/HTTP
URLParamTwo     http://sap.com/xi/XI/System/HTTP

SMS messages do not appear in the Messages list, although the BlackBerry smartphone indicates that SMS messages have been received

The BlackBerry smartphone shows notification that a SMS message has been received, but the SMS message does not appear in the Messages list or the SMS and MMS list

Hi!
Do you have an icon for SMS and MMS messages?
To find the messages in the mean time from the main message queue do a search:
Options>search setup up the options as follows it will show all unopened messages.
Service=ALL SERVICES
folder: ALL FOLDERS
show: ONLY UNREAD
type=ALL
Thanks,
Bifocals
Here is the icon I'm referring to:
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Instant messages are not received

Instant messages can't be received to contacts that are online. The status for these contacts is changing until the message is not received (offline-online although the contact is always online). When the contact writes your smth, the message is delivered. It happens on the latest skype version and on the beta version too. I also tried to remove the skype and clean up the register and install the beta version only after that.

Lync is aware of active conversations. This is how it works:
You are signed in to three different endpoints (let's say A,B & C)
someone sends you an IM, you'll get a notification on each endpoint
You decide to answer on endpoint B
Each consecutive IM between those 2 endpoints will only be send to endpoint B.
Only when someone in the conversation closes the IM (or it timed out) and the other party sends a new IM, a new popup toast is shown on all devices.
In point 4 it's very normal that Lync only sends to endpoint B since it know's you're active there. I would consider it annoying if a conversation I already had is also opened on a different endpoint. You would close it anyway.... If you want to continue
the conversation, you go to Outlook conversation history (in your Exchange mailbox) and continue the conversation from there so the other party gets contextual information.
Once the conversation is closed or timed out (point 5), Lync is not sure on which device you are so it send a new toast to every signed in endpoint. It could be that you changed PC or switched to mobile in between.
That's how it works and this behavior cannot be changed. I actually think it works fantastic.
Certified IT Professional Lync Server 2010 / Exchange 2007 -
http://www.uwictpartner.be
If you think my post is the answer to your question, please mark it as answer so future visitors can easily find it.
My Lync 2013 deployment doesn't work like that. If I'm signed in on three devices (my work PC, my phone, and my home PC), I never know which of the 3 a new IM will come in on. It seems to randomly choose it.

How can I view the text messages sent and received from my phone?how can I view the past text messages sent to my phone

How can I view the text messages sent and received on one of the other phones on my plan?

You would have to view them on the other phone.

When is a message considered as received when using Near Field Communication?

Hi there!
I'm using Near Field Communication(NFC) in my app(it's a game) and I just want to send very simple messages so the regular NFC tap suffices.
I've read the documentation and went through the proximity sample and I understand what I've to do to make this work, so no problems so far.
The thing I'm struggeling with is the following: I would like to send a message using NFC to a particular player in my game.
Two players are connected to each other and only those two should be supposed to be able to send messages to each other using NFC.
These messages do not contain any secret information so I can use the "Windows." format as tag to subscribe to and send messages with.
I came up with the idea to subscribe for a tag that's basically your userId and publish messages with a tag that consists out of your opponents user_id. All of that works fine the thing is, I use the MessageTransmitedHandler and MessageReceivedHandler, the
one is raised when you've succesfully transmited the message and the other one when you've received a message.
These callback functions make sure that you only send a message once and receive it once by using the StopPublishingMessage and StopSubscribingForMessage functions. And here's the catch, I only want to call these functions if you actually "consume"
the message you receive! And stop publishing a message when the correct opponent received it.(This is to make sure that if multiple users are in the same room for example that only the one's related to each other can tap each other's devices).
Right now the callback function will always stop publishing the message, or subscribing to a message even if you tapped the wrong user.
I'm not 100% sure but I do believe this is because the callback function is called no matter if the other device really "consumed' the message.
So my question is, is there a way to determine if the opposing side actually "consumed' the message? If there's no built in function for this(which I think there isn't after I went through the documentation) do you guys have any idea how I could achieve
the behaviour I want?
I hope my message isn't too confusing, if it's feel free to indicate that and I'll try to clarify those parts.
Thanks in advance!
My best regards
Jan

Proximity is a great way for users on tow devices to share your app experience and data. You can establish a connection between two peer apps at one time as I know. This quickstart describe it in detail,
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh465205.aspx. If one user want to communicate with a third user, his app need to connect to that one first.
If I'm not mistaken this sets up a WiFi or Bleutooth connection, I'm not really looking for that since the message I wish to send is really really short and NFC is perfect for it. It seems like a hassle to me to set up such a peer to peer connection just to
be able to identify if the message has been received by the correct user.

Issues with processing messages on one receive port causes problems on all the receive ports that are on the same handler

Greetings,
An integrator installed biztalk in our environment to process the hl7 message flow between their source application(s) and several receiving applications. We've had problems with this set-up for a while now because some receiving applications sometimes have
problems processing the messages. Be it either because there's problems with the server that processes the messages of a certain port or because there's problems with the software/daemon/service that needs to process these messages.
The main problem with this, is that the receiving end of this isn't under our control nor under control of the integrator, but when one receive port isn't processing their messages for a while it causes a problem with all the receive ports that are on the
same handler. So other receive ports start noticing a slow-down of their incoming messages until after a while nothing gets through anymore.
What is the best practice to prevent these kind of problems? Should we just create a handler for every receive port? Because that seems a bit overkill.
Thanks in advance.

What do you mean exactly with this question?
"Can you provide some more detail like BizTalk the receiver? "
The adapters are mainly file and MLLP, the MLLP adapters are already seperated from the file adapters (a handler for MLLP and a handler for file).
The problem with all the receive ports is that when one receive port isn't processing its messages (usually caused by the software processing the messages) the other receive ports on the same handler receive their messages/files a lot slower. If for any
reason the problem isn't fixed soon, the other receive ports on the same handler actually stop receiving any messages at all.
Isolating the receive port that causes the problems like la Cour suggested can work, but next time it might be another port that experiences this issue. So we are looking for a way to make sure the whole message flow isn't hindered by one port (whichever
port) that can't process its messages. Or rather by one receiving software that can't process its messages.

TS4268 I,am unable to send photos via messages but can receive them

I,am unable to sent photos in messages but can receive them. Help

The SIM question/issue is separate from all of the others. Your iPhone will not access the cellular newtwork until you install a new SIM. The current SIM has been deactivated and is now useless. Get a new SIM, install it (or have it installed), then have your carrier grant the iPhone access to the cellualr network.

HT1414 Why do I get 'This message has no content' with some e-mails on my iPad when the same messages can be received on my MacBook Pro without any problem, and how can I fix it?

Why do I get - 'This message has no content' - with some e-mails on my iPad when the same messages can be received on my Mac Book Pro without any problem and how can I fix it?

Is this a POP (POP3) email account? If so, you MacBook Pro may be retrieving the email and deleting it off the server before your phone can. Another possibility is that both your Mac and your phone are trying to retrieving it at the same time, and the POP server, which will only allow a single email client connection at a time, is locking out your phone resulting in the "has not been downloaded from the server" error.

To whom this may concern, I'm having troubles with uploading Flash Files Online throught Adobe Flash Professional and I would to correct the Error Messages I've received as an indication that I need to correct them in order to test a Flash and Shockwave F

To whom this may concern, I'm having troubles with uploading Flash Files Online throught Adobe Flash Professional and I would to correct the Error Messages I've received as an indication that I need to correct them in order to test a Flash and Shockwave Files I have stored into the Software of Flash!. Could you please help me get this matter resolved? Gerard Hargrove.

what exactly are you trying to do and attach a screenshot of the error message, if it's in english.

Obtain message id in receiver

Similar Messages

Maybe you are looking for