OCCI VS2005 InstantClient 11_1_0_7 - really close, help appreciated

OK, I have an OCCI app written in VC++8 (DevStudio 2005).
I have downloaded InstantClient 11_1_0_7 Basic plus the SDK.
The program compiles and links, and I am linking against the oraocci11.lib in instantclient_11_1/sdk/lib/msvc/vc8
Note that with this version of the SDK, there is no "debug" version of oraocci11.lib, as there was under 10_3, so I am using the
same one for Release and Debug. For the Debug build, I exclude msvcrt.lib from the default link libraries.
I copy oci.dll, orannzsbb11.dll, and oraocci11.dll from the top-level instantclient directory to the directory with my executable.
Now, if I take the oraocci11.dll from the top-level instantclient directory, and use it, my program runs, and it can createEnvironment,
but then I get the error ORA-24960: the attribute OCI_ATTR_USERNAME is greater than the maximum allowable length of 255.
Searching around suggests that I'm using the wrong DLLs (VC++7) when I get this error.
If I instead take the oraocci11.dll and oraocci11.dll.manifest from the instantclient_11_1/vc8 directory, the program will not start,
I get a Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly.
I get the same errors on the Release and Debug builds.
Any help appreciated!

They say "Using a 32bit DG4ODBC on a 64bit Windows operating system is NOT certified." but we do it extensively and it works just fine. You need to install a 32-bit home and create a listener for the 32-bit gateway. Only downside (aside from maintaining 2 homes) is that if you need to file an SR, you must prove that you're able to reproduce the problem when the gateway is running on a 32-bit OS. We keep a little 32-bit server around for this purpose and point our gateways to that box to reproduce issues for SR's.
If you want to run "certified" all the time, you could leave the gateways running in Production on a 32-bit OS, but it runs considerably slower this way, and all because Oracle won't support your SR's. You have to decide if you really think you'll hit an issue that wouldn't reproduce on the true 32-bit OS and decide if it's worth the risk. We've made our decision...
Good luck!

Similar Messages

  • My iPhone 5c is stuck onto zoom I cannot get into phone as buttons too large for pass code to press and hence lockdown after several attempts can't get access to settings tried turning off and on and also took sim out and back any help appreciated

    mmy I phone 5 c is stuck on large close up (zoom)
    i therefore can't get into the phone as the pass code to get in is difficult to get everytime you get two numbers I you can't get the other two
    so this has caused the lockdowns ..many times... I am now waiting to try again in 23 minutes but same thing will happen again as all the numbers are not displayed on the screen
    i I don't know if I have done anything as it was all working fine up to last night and been like this ever since
    i I have taken out the sim and put back
    aany help appreciated thanks

    There are two ways to turn off Zoom:
    1. Connect to iTunes. Go to the iPhone summary pane and click the "Configure Universal Access" button. Then turn Zoom off.
    2. Double-tap the phone's screen with three fingers. Then go to Settings -> General -> Accessibility -> Zoom and tap the Zoom On/Off switch.

  • SLOW Mac Book Pro  help appreciated.

    Hello friends. I was searching the forums for help to understand why my Mac Book Pro is suddenly so slow... I found and ran etreCheck... so I'll copy and paste it here... the one item in read was that time machine is not configured.... anyway, here you go:
    Problem description:
    A few weeks ago, my Macbook pro started running slow… the spinning icon just keeps spinning… it takes so much longer to restart my computer now… 10+ minutes… more than 1/2 of my hard drive is free…
    This problem is more evident when I go to close a webpage or program or when I sync Itunes.
    Thanks, G
    EtreCheck version: 2.0.6 (91)
    Report generated October 21, 2014 at 10:55:29 PM EDT
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 512 MB
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: one day 2:8:7
    Disk Information: ℹ️
      Hitachi HTS545050B9A302 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 426.00 GB (185.29 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 73.25 GB (36.67 GB free)
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Logitech USB Receiver
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Launch Agents: ℹ️
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] net.sourceforge.MonolingualHelper.plist Support
    User Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [running] com.spotify.webhelper.plist Support
      [loaded] com.valvesoftware.steamclean.plist Support
    User Login Items: ℹ️
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      TuneupMyMac UNKNOWNHidden (missing value)
      Mac Game Store Helper Application (/Users/[redacted]/Library/Application Support/MacGameStore.com/Helper/Mac Game Store Helper.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Safari Extensions: ℹ️
      My eBay Manager
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          4% mdworker
          4% mds
          2% WindowServer
          0% ocspd
          0% Last.fm Scrobbler
    Top Processes by Memory: ℹ️
      241 MB Safari
      90 MB Finder
      77 MB WindowServer
      69 MB Last.fm Scrobbler
      60 MB com.apple.WebKit.Networking
    Virtual Memory Information: ℹ️
      798 MB Free RAM
      1.50 GB Active RAM
      454 MB Inactive RAM
      1.06 GB Wired RAM
      1.31 GB Page-ins
      45 MB Page-outs

    no replies in a week... thought I'd bump this... really need help...
    teachergoOct 21, 2014 8:04 PM
    Hello friends. I was searching the forums for help to understand why my Mac Book Pro is suddenly so slow... I found and ran etreCheck... so I'll copy and paste it here... the one item in read was that time machine is not configured.... anyway, here you go:
    Problem description:
    A few weeks ago, my Macbook pro started running slow… the spinning icon just keeps spinning… it takes so much longer to restart my computer now… 10+ minutes… more than 1/2 of my hard drive is free…
    This problem is more evident when I go to close a webpage or program or when I sync Itunes.
    Thanks, G
    EtreCheck version: 2.0.6 (91)
    Report generated October 21, 2014 at 10:55:29 PM EDT
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2.2 GHz Intel Core i7 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6750M - VRAM: 512 MB
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: one day 2:8:7
    Disk Information: ℹ️
      Hitachi HTS545050B9A302 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 426.00 GB (185.29 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      BOOTCAMP (disk0s4) /Volumes/BOOTCAMP : 73.25 GB (36.67 GB free)
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Logitech USB Receiver
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Launch Agents: ℹ️
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] net.sourceforge.MonolingualHelper.plist Support
    User Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [running] com.spotify.webhelper.plist Support
      [loaded] com.valvesoftware.steamclean.plist Support
    User Login Items: ℹ️
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      TuneupMyMac UNKNOWNHidden (missing value)
      Mac Game Store Helper Application (/Users/[redacted]/Library/Application Support/MacGameStore.com/Helper/Mac Game Store Helper.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Safari Extensions: ℹ️
      My eBay Manager
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          4% mdworker
          4% mds
          2% WindowServer
          0% ocspd
          0% Last.fm Scrobbler
    Top Processes by Memory: ℹ️
      241 MB Safari
      90 MB Finder
      77 MB WindowServer
      69 MB Last.fm Scrobbler
      60 MB com.apple.WebKit.Networking
    Virtual Memory Information: ℹ️
      798 MB Free RAM
      1.50 GB Active RAM
      454 MB Inactive RAM
      1.06 GB Wired RAM
      1.31 GB Page-ins
      45 MB Page-outs
    MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)

  • 'Easy Set-up' Option - Problem with edit canvas/windows - really need help!

    Hello Everyone. . .
    Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
    I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
    When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
    Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
    I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
    Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
    Any help on all this will be very much appreciated!

    Hello Everyone. . .
    Have a problem that i really need help with, i have tried so many different things to sort this - but with no sucess.
    I usually work in High Definition and i have recently done a small project for someone in DV. When changing to work in DV, i selected the DV setup from the 'Easy Setup' menu. I have now changed back to HD and there are a few things different with Final Cut that i can't shift!
    When i move a clip from the capture bin into the edit window, the clip no longer fills that window like it always used to and there are lines at the top and the bottom of the clip - almost like it is in widescreen.
    Editing like this wasn't too much of a problem, but when i came to compress and do a final render of the whole film - there was the same black lines on the top and bottom of the film.
    I can't figure out how to get the setting back to how they were, and have the clips fill the edit windows and fix the end render/compress.
    Any ideas from anyone on what i am experiancing with all this? And. . . how to fix this problem?
    Any help on all this will be very much appreciated!

  • Really need help with MSI R7970-2PMD3GD5/OC:(

    Greetings to all,
    I really need help with my brand new MSI R7970-2PMD3GD5/OC. I've purchased it two days ago and I didn't really have time to test the card until yesterday. The card is I think way to hot for my "liking". It idles at 56c-60c, at full load in Heaven benchmark 3.0 in 1920x1080, extreme tessellation and 8xAA card reaches 95c-97c. Stock cloacks are 1010Mhz/1375Mhz and stock voltage is 1,174v. Case is being cooled by two Noctua NF-P12 fans. Also I tried lowering the voltage and "underclocking" the card to a standard 925Mhz in small increments, but it doesn't help at all. Each and every time it results in BSOD and dx dll errors and complete system failures. Replacing the card wouldn't be a problem if I lived in a "normal" country that has access to a steady supply. Retailer that sold me a card told me that only 5 cards total have been imported from the launch day and told me that i bought the "last" card in my country. They could order a replacement but it would take them more then a month to do so.:( Ohhh and one more thing I don't overclock, everything in my case is at their default values.
    Recently, I read that "Amd released" a bios update for a standard reference boards that turns them into a "GHZ editions". Also lot of users report a lower voltage requirements and lower temps with that "boost bios". As I understand this card pcb is not Amd's reference board design, I could be wrong it's not that uncommon.. So I didn't want to risk warranty by flashing it to a position 1. Will MSI release the boost bios for this model of card? I am humbly asking MSI staff on how to proceed regarding this problem. I would be immensely grateful for any help you could provide.

    Quote from: Svet on 24-August-12, 18:13:26
    what PC case you use exactly?
    have you tried to open PC case side door and to retest?
    Hi,
    it's open case. If i close it the temps get even worse:(
    They get better for other components, but not for gpu. Two Noctua NF-P12's are cooling the case, first one is positioned above gpu, left side next to cpu. Other is right beneath the gpu, right side of case. Just under the hdd section of the case. I tested each and every component with my backup card nv 8500gt. They function within the specified parameters. I'm getting somewhat worried.
    П.С. Поздрав Свет
    да ли сте ви са наших простора да не куцам на енглеском?

  • Really need help (motor control using labview)

    hi all readers,
    im new beginner. really need help for my project. i've been assigned to monitor/control motor using labview 8.5 (using NI DAQmx). the problem is, the techinician told me that i cant use 3phase motor with this card. things that i need to displayed using labview is :
    torque
    power
    current
    voltage
    speed
    really appreciated if readers can help me with this:
    wut type of motor shud i use that compatible with NI DAQmx
    thanks a lot.

    Hi fauziana,
    NI data acquisition devices are primarily designed to take measurements, so it's a good idea to measure the signals that you have mentioned with a DAQ device.
    You also can use DAQ devices for control tasks, but for reliable and deterministic control behavioryou typically need to use a real-time operating system (not Windows!). If you want to learn more about the pros and cons of using DAQ devices for motion control tasks, please refer to these threads. Still for standard motion control tasks it's much more efficient in terms of development time, to use a dedicated motion control device for the motion control part of your application.
    In general the control part is independant from the motor type, as these devices only generate control signals (+/- 10 V). There are many power drives available, that accept this type of control signal and you should select your motor according to the requirements of your application.
    For a more detailed system consulting, please contact your local NI branch. To select the products that fit best to your application requirements a face to face discussion is much more efficient than a discussion forum thread, because there are a lot of parameters that need to be taken into consideration. If you tell me in which country you are living, I can provide appropriate contact data to you.
    Thanks and kind regards,
    Jochen Klier
    National Instruments

  • All Web Dynpros are down... I really need help.

    Hi. I really need help because our portal has serious problems since yesterday. All of them seem to be related to missing Jar files.
    After installing several SCA files using SDM (Software Deployment Manager) yesterday, all Web Dynpros stopped working (even SAP Dynpros such as User Management).
    I've been looking for solutions all day and can't find anything. Any help would be greatly appreciated. Here are the errors I get:
    All homemode Dynpros show the following error:
      java.lang.NoClassDefFoundError
        at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnectionUnMapped(SystemLandscapeFactory.java:168)
        at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnectionUnMapped(SystemLandscapeFactory.java:178)
        at com.sap.tc.webdynpro.services.sal.sl.core.SystemLandscapeInternal.getJCOClientConnectionUnMapped(SystemLandscapeInternal.java:62)
        at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker$1.fillSldConnection(DataTypeBroker.java:77)
        at com.sap.dictionary.runtime.ProviderFactory.internalResolveLogicalNameToJCODestination(ProviderFactory.java:437)
        ... 61 more
    For SAP's Dynpros, I get the following error:
       java.lang.NoSuchMethodError: com.sap.portal.activitydatacollector.ICollectorHook.isActive()Z
        at com.sap.portal.activityreport.ActivityReportHookInterface.updateADCAfterInteraction(ActivityReportHookInterface.java:176)
        at com.sap.portal.activityreport.ActivityReportHookInterface.onAfterInteraction(ActivityReportHookInterface.java:145)
        at com.sap.portal.activityreport.wdp.InternalActivityReportHookInterface.onAfterInteraction(InternalActivityReportHookInterface.java:128)
        at com.sap.portal.activityreport.wdp.InternalActivityReportHookInterface$External.onAfterInteraction(InternalActivityReportHookInterface.java:167)
        at com.sap.portal.pb.hook.PortalHooksManager.updateHooks(PortalHooksManager.java:58)
        ... 34 more

    I do have access to it.
    Here are two examples of errors/warnings we got a lot during the upgrade:
    Caused by: com.sap.engine.frame.core.locking.LockException: Cannot lock [2010112417061085000000portail......................3814850, DEPLOY_LOCK_AREA, sap.com/com.sap.lcr, X]; it is in use by the same owner. In case of lock mode "R" the lock propagation failed, because the optimistic lock is gone.
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Already started operation with application sap.com/com.sap.lcr in the cluster. No other operation with this application is allowed at the moment..
    Another thing that could help you understand my problem: when I log into Portal and go to Content Admin / Web Dynpro / Main JCO destinations, even if my destination's status is set to OK (green light), I get this Java error if I click on "test":
       java.lang.NoClassDefFoundError
        at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.getJCOClientConnection (SystemLandscapeFactory.java:150)
        at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.getJCOClientConnection(WDSystemLandscape.java:30)
        at com.sap.tc.webdynpro.tools.explorer.JCOConnectionsDetails.onActionTestConnection(JCOConnectionsDetails.java:226)
        at com.sap.tc.webdynpro.tools.explorer.wdp.InternalJCOConnectionsDetails.wdInvokeEventHandler(InternalJCOConnectionsDetails.java:303)
        at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
        ... 28 more
    Thanks again.
    Edited by: Mathieu St-Gelais on Nov 29, 2010 3:13 PM

  • HT4623 "Software update" (words)don't appear when I press settings/general.should appear below "about"on my iPad 2 version4.3.5(8l.1) tenable me to update to ios6 any help appreciated

    In "settings/general" the words SOFTWARE UPDATE don,t appear below ABOUT or anywhere under GENERAL to enable me to update to ios6 . Any help appreciated.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

    When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
    Here's the cycle:
    I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
    Click Restore
    Extracting software…
    Preparing iPad for restore
    Waiting for iPad…
    Verifying iPad restore with Apple…
    (empty bar under the Apple logo…does not show any activity)
    “The iPad “iPad” could not be restored. An unknown error occurred (9).”
    Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
    I swapped out the USB cable to a new cable and get the same results.
    I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
    I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
    I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
    It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
    So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
    Any advice would be appreciated.
    Thanks!

    Hello jaybearden,
    Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
    Resolve iOS update and restore errors - Apple Support
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My iPad has to be really really close to the router for it to have internet. How can I make it so I can go around the house with it?

    My iPad has to be really really close to the router for it to have internet. How can I make it so I can go around the house with it? My iPad has been like this for a couple of months, and it has really irritated me. My friend came over and he had to download iTunes for something on the computer. He needed my iPad, he tried it and it wasn't really near the router.

    I'd begin by reviewing the following:
    http://support.apple.com/kb/TS1398

  • I have attempted to upgrade os4 to os7. icloud has taken an old expiered email address for which i do not know the password. It will not recognise my current email and password with itunes.  Any help appreciated

    I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
    I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up. 
    Desperately need help please... Any help appreciated
    Thankyou

    If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

  • I can no longer attach files to my outgoing Hotmail emails.  I only receive a message that an  error has occurred. Help appreciated.

    I can no longer attach files to my outgoing Hotmail emails.  I only receive a message where I would expect the Upload to appear that an  error has occurred.
    I am using a MacBook Pro with Retina, 2 Ghz Intel Core i7, OS X 10.9.4
    I have no difficulty attaching files to the outgoing Hotmails on the same account using my iPhone.
    Help appreciated.

    Thanks for this - not an immediate solution I fear but will keep unplugging stuff and restarting stuff.
    To try and be clearer about the problem - I have in the last managed to send attachments successfully.  Now  I can send and receive plain email messages but get the error message when I try to attach an existing file to an email - not just a particular file but it would appear all files are being treated in the same way. 
    An experiment to send a mail to which an attachment has failed to upload got the following message alongside the SEND button
    Files with errors will be removed from the email and not sent.
    - but the mail alone was sent and received successfully.  Thanks for any pointers you can give me. 

  • I was trying to sync my 120GB iPod Classic earlier and it said it couldn't sync as the iPod disk could not be "read" or "written to". I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

    I was trying to sync my 120GB iPod Classic earlier, and it said it couldn't sync as the iPod disk could not be "read" or "written to." I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

    Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location.  Select the location of your on external hard drive. 

  • HT1320 I have a new IPod Touch 5G, 32 gb and suddenly it will not turn on, and will not restore using UTunes.  Any help appreciated.

    I have tried many times to restore my  new IPod Touch 5G in I Tunes and it will not allow me to do it.  My Ipod will not turn on at all even when on a fresh charge.  Only displays the arrow leading up to ITunes logo.  I have tried the method of holding the home button and on button and this does not work.  Any help appreciated.
    My I Pod was working fine until the day I updated the software to 6.0.1.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • TS1717 Trying to download iTunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

    Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

    I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
    The root cause for this was failing to use the UTILITY designed for this very purpose.
    I edited the virtual directory settings in IIS and was able to put the correct path in.
    You still need to use the UTILITY.. to fix all the other stuff you're still missing.
    In the %ProgramFiles%\Update Services\Tools folder...
    WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
    This problem was caused by moving the WSUS updates to a different local drive.
    No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Maybe you are looking for

  • Report with Subreport - Summary Table On First or Last Page

    Post Author: andbort CA Forum: General All- My apologies in advance for the long post. I would like to know if something can be done in a single report instead of having to spread it across two reports. I will use generic (Xtreme sample database) fie

  • WDS service will not start

    this is a server 2008 sp2 and WDS roles was added after sp2 it worked at first but then just stoped working i restarted the service and it just times out and refues to start the DCHP is on another server i have wdsutil /uninitialize-server wdsutil /i

  • No Flash Sound on YouTube

    HP Pavilion Entertainment PC dv9700 Service Tag dv9910us Window 7 Ultimate 32-bit.  Get no Flash sound on YouTube or CNN.  Get good sound from YouTube videos saved to hard drive by Realplayer.   Then the saved YouTube video plays everywhere: Windows

  • Detect displays not working on macbook pro

    My external monitor no longer works with my MacBookPro.  I know the monitor works because I also use it with my old G4.  Could it be the miniVGA cable that's defective?  Also, the "detect display" command doesn't work

  • Why does iMovie stop working after a set number of photos?

    I have struggled through 3 Photo Storys so far using iMovie, only to be thrwated by the same problem every time!  There are hundreds of photos to add, to give you an idea I'm at 11 minutes 44 seconds with 1 second transitions and 4 second photos. At