Ocfs2 mounting problem

I am just installing a 2 nodes RAC. I cannot mount the ocfs2 filesystem. At startup and at command line, the mount command shows errores. Eventhough the ocfs2console mounts the same partition succesfully!
[root@rac1 ~]# mkfs.ocfs2 -b 4K -C 32K -N 4 -L /crs1 /dev/sde1
mkfs.ocfs2 1.2.1
Overwriting existing ocfs2 partition.
Proceed (y/N): y
Filesystem label=/crs1
Block size=4096 (bits=12)
Cluster size=32768 (bits=15)
Volume size=1073512448 (32761 clusters) (262088 blocks)
2 cluster groups (tail covers 505 clusters, rest cover 32256 clusters)
Journal size=16777216
Initial number of node slots: 4
Creating bitmaps: done
Initializing superblock: done
Writing system files: done
Writing superblock: done
Formatting Journals: done
Writing lost+found: done
mkfs.ocfs2 successful
[root@rac1 ~]# mount -t ocfs2 -o datavolume,nointr /dev/sde /crs1
ocfs2_hb_ctl: Bad magic number in superblock while reading uuid
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not
permitted"
[root@rac1 ~]# /etc/rc.d/init.d/o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking cluster ocfs2: Online
Checking heartbeat: Not active

Hi, the same problem is here
[root@node1 ~]# mounted.ocfs2 -d
Device FS UUID Label
/dev/sdb1 ocfs2 456a44f0-1b41-4a42-b2d2-3538aa003e50 /u03
[root@node1 ~]# service ocfs2 start
Starting Oracle Cluster File System (OCFS2) ocfs2_hb_ctl: Bad magic number in inode while reading uuid
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted"
[FAILED]
but it is ok on node2.
anybody have some idea?

Similar Messages

Ocfs2 mount problem due to datavolume option.

hi,
i am trying to install oracle rac on fedora core 6 through iscsi.
when i try to mount,
mount.ocfs2: Invalid argument while mounting /dev/mapper/rac-crs on /mnt/crs. Check 'dmesg' for more information on this error.
error log in dmesg,
ocfs2: Unmounting device (253,11) on (node 255)
(27354,0):ocfs2_parse_options:753 ERROR: Unrecognized mount option "datavolume" or missing value
version of ocfs2:
[root@server ~]# rpm -qa | grep ocfs
ocfs2console-1.2.2-1
ocfs2-tools-devel-1.2.2-1
ocfs2-2.6.9-42.EL-1.2.4-2
ocfs2-tools-1.2.2-1
i googled and found this datavolume option was taken from 1.2 but also it is quite needed for voting disk.I saw the dates of threads discussing this problem and it is almost 7 to 8 months back.
how to make it work? is any new version available now? or how to fix it?
thanks for any response.
regards,
Nirmal Tom.V

Hi,
What parameter you use to mount ocfs2 filesystem??, they must be
/dev/sdb1 /u02 ocfs2 _netdev,datavolume,nointr 0 0
Regards
Angel

Coping iso file and mounting problem

Hi
I am using Windows 8.1 Update Enterprise 64 bit and Windows ADK.
I noticed that, if I select the "Environment of the deployment tools and creations images" and I click on the "Run as Administrator" item of his Pop-Up menu and I mount on a iso image of windows 8.1 Update, when I run the command
robocopy <Drive_Letter>:\"<Windows_Files_Path>" /e
to copy all its files in a directory and the command
dism /Mount-Image /ImageFile:"<Windows_Files_Path>"\install.wim /Index:<Image_Index> /MountDir:"<Mount_Directory_Path>"
to mount an image volume, this error appears:
Error: 0xc1510111
Not have permission to mount and modify this image.
However, if I copy these files through the "file explorer" window, the mounting of this volume image is working properly. How come?
Thanks
Bye
Balubeto

I am unable to reproduce the issue above:
E:\>dism /mount-image /imagefile:e:\release\Captures.001\Win2008R2Sp1.wim /index:1 /mountdir:c:\mount
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Mounting image
[==========================100.0%==========================]
The operation completed successfully.
E:\>robocopy e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT e:\mount\test zti*.log /njh /ndl
100% New File 226728 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIApplications.log
100% New File 1228 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIApplyGPOPack.log
100% New File 10283 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIAppVerify.log
100% New File 29169 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIBackup.log
100% New File 2101 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIBDE.log
100% New File 36103 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIConfigure.log
100% New File 34934 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIDiskpart.log
100% New File 1027 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIDomainJoin.log
100% New File 41428 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIDrivers.log
100% New File 93591 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIGather.log
100% New File 2619 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIGroups.log
100% New File 2898 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTINextPhase.log
100% New File 3875 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIOSRole.log
100% New File 740 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIOSRolePS.log
100% New File 2350 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIPatches.log
100% New File 4180 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ztiRunCommandHidden.log
100% New File 1215 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTITatoo.log
100% New File 1855 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIValidate.log
100% New File 190933 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIWindowsUpdate.log
100% New File 1436 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIWinRE.log
100% New File 40631 e:\release\Captures.001\Create\WIN2008R2SP1\MININT-E5LVCNT\ZTIYellowBang.log
Total Copied Skipped Mismatch FAILED Extras
Dirs : 1 0 0 0 0 0
Files : 21 21 0 0 0 0
Bytes : 712.2 k 712.2 k 0 0 0 0
Times : 0:00:00 0:00:00 0:00:00 0:00:00
Speed : 5209457 Bytes/sec.
Speed : 298.087 MegaBytes/min.
Ended : Tuesday, September 23, 2014 11:13:46 AM
E:\>dism /unmount-wim /mountdir:c:\mount /commit
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image File : e:\release\Captures.001\Win2008R2Sp1.wim
Image Index : 1
Saving image
[==========================100.0%==========================]
Unmounting image
[==========================100.0%==========================]
The operation completed successfully.
Additionally I can see that the original question asked was copied from this post 2 years ago:
http://www.eightforums.com/installation-setup/54246-coping-iso-file-mounting-problem.html
is this really your problem?
Really, this is not a MDT related question. perhaps a general Windows Setup forum would be a better place to ask this question.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

10.5.8 disk mounting problem

I updated to 10.5.8 and decided I would download the photoshop elements trial off Adobe's website. It was at 365 MB of 1.27 GB and it suddenly came up "mounting failed" I am currently trying to download it again, but my internet connection is slow so it will be awhile before I see if it happens again at 365 MB. Has anyone else had disk mounting problems in 10.5.8?

Speaking as someone who works a lot with PSE, I would say the odds are very high that this is an Adobe problem rather than a 10.5.8 problem. Wait a while and try the download again.

Mounting problem, mount: unknown filesystem type 'vfat'

Can't mount vfat partition.
Mounting problem, mount: unknown filesystem type 'vfat'

takavar wrote:sorry for the necromancy, but this is the top result on Google search with no answer.
I am going to close this thread because (a) the thread is more than two years old, abd (b) may or may not be related to your problem.
Please open a new thread detailing your problem. Define what is "Solved" by rebooting. Does the drive mount during a reboot? Tell us how you are trying to mount the drive, and provide us your /etc/fstab. You may want to share the the output of sudo fdisk -l /dev/sda
If you still think it relevant. provide a link back to this thread.
Thanks

Narrowing down "iPod won't mount" problem

Regarding the "iPod won't mount" problem that has been posted a number of times: is anyone having this problem with a USB connection or just with a Firewire connection?
I'm using Firewire and can't get my iPod to mount. I don't have a USB connector for the iPod and I thought I'd do a little research on the problem before I go buy a USB connector.

My 4th generation Ipod would not mount with the firewire but worked fine with USB.

Can we expand OCFS2 mount point Size by adding additional LUN?

can we expand OCFS2 mount point Size by adding additional LUN?

Looks like it should be possible....see if this helps:
extract from:http://oss.oracle.com/projects/ocfs2/dist/documentation/ocfs2_faq.html
# Can OCFS2 file systems be grown in size?
Yes, you can grow an OCFS2 file system using tunefs.ocfs2. It should be noted that the tool will only resize the file system and not the underlying partition. You can use fdisk(8) (or any appropriate tool for your disk array) to resize the partition.
# What do I need to know to use fdisk(8) to resize the partition?
To grow a partition using fdisk(8), you will have to delete it and recreate it with a larger size. When recreating it, ensure you specify the same starting disk cylinder as before and a ending disk cylinder that is greater than the existing one. Otherwise, not only will the resize operation fail, but you may lose your entire file system. Backup your data before performing this task.
HTH
Thanks
Chandra

Yosemite 10.10.1: Finder/CIFS mount problem: wrong folder count/folders not shown @samba shares

Hello to all,
we have several MacBook Pro (15" MBP Retina 2012/13"MBP Retina 2014) running. After upgrading to Yosemite 10.10.1 we had one nightmare after the other.
Most problems could be solved with 3rd party software upgrades but there are several problems with the operating system itselve which can not really be called a professional productive system at the moment...
Ok., one thing after the other...here is one of our biggest problems:
After upgrading from Mavericks or Mountain Lion to Yosemite 10.10.1 the CIFS/SMB mounts to our samba 3.x servers, running on Ubuntu Linux LTS 12.04 makes trouble. We could mount the server shares but after browsing with the Finder the beach ball occures and the Finder hangs forever. Sometimes we could not refresh the Finder, killing the process ended in a complete hang-up of the system which ended in a switch off death blow. This is not amusing because we have 30Tb of customer data there, which has to be worked out.
We heard about the SMB3 protocol which will be used per default in Yosemite and so we decided after some testings to upgrate our Ubuntu servers to the latest LSF 14.04. release with samba 4.1.6 installed. There was no message from Apple for this SMB protocol release upgrade, never heard something related to Yosemite (Why?).
Ok, after these server upgrades and disabling most of the Spotlight functions the performance to the CIFS shares was a little bit better as before but now we have another problem with the Finder...if you browse to the shares there are folders missing which have lots of files in it. For example there is a folder with 60 subfolders and 3562 files on the first level in it, the Finder shows 220 files and 15 folders. The Terminal shows a different count with "find . -maxdepth 1 -type d | wc -l" or "find . -maxdepth 1 -type f | wc -l" but there is also a difference to the original file and folder count. It doesn`t matter if the clients are connected via WiFi or Gigabit Ethernet. We have no access problems. We have the same behavior if we set the files and folders to 0777 permissions on the servers. The deletion of the preferences files of the users on the MacBooks does not solve the problem. If we use the "Go To Folder" option and type the path to a folder which is not shown in the Finder you get an result or not. But it is also possible that the result is not correct and there are also still files or subfolders missing.
In my opinion this is a timeout problem and a "special SMB3 protocol interpretation" which is buggy. We have one hint found in /var/log/system.log:
"Jan 23 14:35:49 wsosx33.clients.getcom.de KernelEventAgent[69]: tid 54485244 type 'smbfs', mounted on '/Volumes/customersdata2015', from '//x144067:@srvlxp013.servers.getcom.de/customersdata2015', not responding"
We had no problems with Mavericks at all, we still have no problems with Windows 7 Pro/Ultimate, Windows 2008R2 (native or virtual) or Linux Mint 17/17.1 clients, neither with samba 3.x nor with our actual environment and different newer samba releases.
We believe that this is a big bug in Yosemite, but we cannot go back to Mavericks because of incompatible TimeCapsule backups. Our workarround at the moment is that we have installed Linux Mint on our MacBooks to get 80% of our daily jobs done, rest has to be done with Windows 7 installed over virtualbox @Linux.
We have no clue at the moment how to solve this problem, the samba logs do not give any hint. The access from other operating systems is perfect and very fast, but not with Yosemite. We checked different tips found in the internet but nothing helped.
Does anybody has another idea to get Yosemite working or should we keep Linux Mint until Apple will provide a CIFS/SMB patch and going on with our workaround solution, which is productive at the moment ??? Our staff is not amused and wants one solution and not this workaround with two operating system. We have to decide wether we wait until Apple will get this fixed or we have to switch to Microsoft Windows (which is a No Go for me, but I will not be asked...).
Thanks in advance
C.

Hi William,
thank you for your response.
As you can read in my post I talked about CIFS/SMB.
It makes no difference if we mount the share over CIFS or SMB.
Folders with lots of files will not be shown even if we use SMB3 or an older protocol.
As mentioned I believe this is a timeout problem.
Does anybody know how the CIFS/SMB timeout setting in Yosemite could be changed?
Kind regards
C.

Mountain Lion Server: Network users Home directory mount problems

I am having several problems with my server after a latest name change of the server via Server.app. (A first name change made problems, after that I have been trying to repair, changing the name a few times more. With latest name change, I also changed the server name itself from Foo to Bar while changing domain name from domain.com to bar.domain.com after which I repaired DNS so it covers the whole domain.com domain).
The users in the Network directory think their home directory is on afp://domain.com/Users, but the server is now called bar.domain.com. /Network/Servers/bar.domain.com does not exist on the server. Client machines (with mobile home directories) are now able to sync, because I added an A record for domain.com to DNS (not nice, but does the job, or more specifically that job). Also on the clients, I can go to a SHARED folder in Finder with the name Bar and go to Users and see al the home directories there. But:
bash-3.2# ls -l /Network/Servers/
total 4
dr-xr-xr-x 2 root wheel 1 Apr 14 11:14 domain.com
dr-xr-xr-x 2 root wheel 1 Apr 14 11:14 foo.domain.com
bash-3.2# ls -l /Network/Servers/*
/Network/Servers/domain.com:
total 2
dr-xr-xr-x 2 root wheel 1 Apr 14 11:14 Users
/Network/Servers/foo.domain.com:
total 2
dr-xr-xr-x 2 root wheel 1 Apr 14 11:14 Users
bash-3.2# ls -l /Network/Servers/*/Users
/Network/Servers/domain.com/Users:
ls: Users: Input/output error
/Network/Servers/foo.domain.com/Users:
ls: Users: Input/output error
So, on the server looking for folder ~user does not work. It wants to go to afp://domain.com/Users/user but that is unreachable.
Any tips on what I can do except do a clean rebuild of the server (again)?
(One of the obvious problems is that the Realm of OD is still called foo.domain.com, the origin of my problems has been that the first name change from foo.domain.com to domain.com (ill-advised, I know) failed — partly).
What I'd like to know is:
- where is it determined which servers end up in /Network/Servers?

Som additional info:
Other machines can mount afp://foo.domain.com/, afp://domain.com/ and afp://bar.domain.com/, but the server itself cannot mount them via Finder.

IPod Shuffle mount problem in 10.4.3 ??

My iPod Shuffle was last updated on my girlfriends iBook (10.4.2), when I try to mount it on my PowerBook (10.4.3) the yellow lamp just blinks, but it dosn´t show i finder, iTunes or system.log
The system update to 10.4.3 is the only diference from when it worked, I wonder if that is the problem.
Anders
PowerBook Mac OS X (10.4.3)

The problem was "solved" when shortly after the iPod stopped the charging and when the power was used up, died completly.
So now its back in the shop... ill properly get a new one.
Anders Thorseth

Mounting problems after upgrade to iTunes 7.6.1

This house has two Mac laptops, both running the latest 10.4.11.
1. After the install yesterday of iTunes 7.6.1 (9), the iBook would not mount applications downloaded as disk images. This I repaired by removing two 'now' unacceptable fonts in the System Collection. However, it now fails to verify most CDs it writes, which are Taiyo Yuden CD-R 52x. (An earlier sporatic problem, I believe Apple had attributed to its failure to stabilize the Firewire bus sufficiently before using it.)
2. Yesterday I installed iTunes on a G4 PowerBook at the same time. Before the install it had never written a coaster, using Verbatim and Taiyo Yuden media. An hour before installing it, I had archived 1/3 of the drive to Taiyo Yuden DVD-R 16x discs (TYG03), which the drive can write to. (Caution: using these discs on some older drives will damage them!)
After the install of iTunes, file-system check, permission fix, reboot, the G4 will burn no DVD. It creates the disc image, then reads the first track of the disc and (before writing a thing),
DVDSpanner: Burn started, Sun Feb 24 22:37:09 2008
DVDSpanner: Burning to DVD-R media with DAO strategy in TSSTcorp CD/DVDW SH-S182M LA00 via FireWire.
DVDSpanner: Requested burn speed was 47x, actual burn speed is 18x.
DVDSpanner: Burn underrun protection is supported, and enabled.
DVDSpanner: Burn failed, Sun Feb 24 22:37:16 2008
DVDSpanner: Burn sense: 5/24/00 Illegal Request, Invalid field in CDB
DVDSpanner: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Does anyone know what a CDB is?
I suspect iTunes the cause because of the fact that both computers failed only & just after iTunes was installed, iTunes writes to optical media, 10.4.9 damaged the LaCie driver, and problems 1 and 2 may both be classed as problems mounting devices.
Any kludges or suggestions? Thanks!
Bruce

No need to all respond at once, I've fixed the computer; though this doesn't solve the problem, if it existed; and now makes that moot.
All the various applications, but Toast apparently, use the same 'device driver' and consequent log file. LaCie's 'disc recording support' driver is now dated February 15, 2008 (on its website only). So, though it looks the same to me, I had an excuse to upgrade to the same one installed earlier. All works now.
This is a sad application of the professional's last maxim: 'When all seems lost, re-install.' So, I'm marking this solved, though this form of solution is the least desirable: it may be only temporary; and now one can't tell.
Thanks to all who thought about it.
Bruce

Mounting problem with Solaris 10

Hi everybody !
I am new in Solaris admin (come from HP !)
here is my problem :
i have to create a FS (would be only data in it) that would be shared by 2 zones working on a fail-over principe.
So i create this FS directly under the global zone.
But i can't find in the Man pages the options of mount that tell the 2 zones to have their entries alternatively on this new FS
waiting for your advices, thanks in advance.
Titine.

You don;t need to mount the FS by NFS unless your talking about zones on two different machines.
Two zones on the same machine can import the same filesystem with no problems.
But I'm unclear as to what your trying to achieve. Two zones on the same machines provides no real failover because if the machine goes down so do both zones.
Your best option is to have the FS on one machine and NFS export it to 2 other machines.
Theres no real advantage to using zones here of course. But you can if you prefer.
Of course the machine hosting the FS is still a single point of failure unless you use a SAN and HA-NFS.

Ocfs2 a problem in my cluster

I'm working in a cluster and when I try to use(start) ocfs2 the service report:
"Starting cluster ocfs2: Failed
cluster ocfs2 created
node 1 added
node 2 added
o2cbt_cbtl: Configuration error discovered while populating cluster ocfs2. None of it's nodes where considered local...bla bla bla
Stopping cluster ocfs2:OK"
THNX FOR YOUR HELP AND SORRY

I face the same problem!!!!
wait for the solution.

[SOLVED] kde 4.6 and Udisks mounting problems with Dolphin

Hello,
I have a problem with Dolphin in KDE 4.6 where it displays my non-Arch partitions (a / and /home used for Opensuse) as well as a CD-Rom or usb if inserted, but registers an error when I click on the device/partition icon. Specifically, I get the following error displayed at the bottom of Dolphin:
An error occurred while accessing Hard Drive, the system responded: org.freedesktop.UDisks.Error.Failed: Error creating mount point: No such file or directory.
Because of this error, I am unable to mount usb pendrives, access CDs, or access the non-Arch partitions. I'm not sure if this is a KDE error or if it related to Arch as I never encountered this error running KDE 4.6 in Opensuse.
My daemons running in /etc/rc.conf
DAEMONS=(syslog-ng dbus networkmanager netfs crond alsa kdm)
My /etc/fstab
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
/dev/sda1 / ext4 defaults,noatime 0 1
/dev/sda5 swap swap defaults 0 0
/dev/sda6 /home ext4 defaults,noatime 0 1
tmpfs /tmp tmpfs defaults,nodev,nosuid,mode=1777 0 0
tmpfs /var/lock tmpfs defaults,nodev,nosuid,noexec,mode=1777,size=10M 0 0
tmpfs /var/run tmpfs defaults,nodev,nosuid,noexec,mode=0755,size=10M 0 0
Now, I don't have hal running as a daemon as I have read that it is no longer needed in KDE 4.6. Similarly, I don't have my CD-Rom drive mounted as I read in the udev wiki that Udisks automatically mounts devices and partitions. The wiki also indicates that Udisks is supposed to require little configuration.
I've searched the forum and Google, and I have not been able to find any information documenting a Dolphin and UDisks mounting error in KDE 4.6.
I installed KDE through the # pacman -S kde command, but is there some other package that I need to install in order to get Udisks working properly?
Thanks.
Last edited by Bordee (2011-03-24 16:09:25)

When I enter $ groups in a terminal I get the following
sys adm disk lp wheel games video audio optical storage power users
So I'm definitely part of the storage group.
I think I found a solution. I created a /data mountpoint in fstab and a /data folder in my root directory. Now, I'm able to mount and access the contents of the /home partition from Opensuse. The reason I wanted to do this was to access music and photos and transfer them onto my Arch /home partition.
I uncommented the cdrom, dvd, and fd0 devices in fstab and I created /media/cd, /media/dvd, and /media/fl. After inputting a # mount -a, my CDROM drive reads properly as does my USB.
So once again, thank, you for pointing me in the right direction.
One final thought. I was under the impression from reading the UDisks information that it automatically detected and mounted other partitions and devices without them being explicitly mounted in fstab. Was the assumption wrong? In other words, for UDisks and Dolphin to work together properly in KDE 4.6, do all of the devices that appear have to first be mounted in fstab?

Oracle XE mount problems

This is brand new installation on 64bit windows xp. The database version is whatever is the latest (as of today).
Installation seems fine, have not seen any error. Then I wanted to connect via SQL developer and got this error:
Test failed: Listener refused the connection with the following error:
ORA-12528, TNS:listener: all appropriate instances are blocking new connections
OK then I went to SQL plus:
SQL*Plus: Release 11.2.0.2.0 Production on Sre Avg 27 11:58:23 2014
Copyright (c) 1982, 2014, Oracle. All rights reserved.
SQL> connect / as sysdba
Connected.
SQL> select * from hr.employees;
select * from hr.employees
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
SQL> select status from v$instance;
STATUS
STARTED
SQL> select name from v$dabase;
select name from v$dabase
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
SQL> alter database open
2 ;
alter database open
ERROR at line 1:
ORA-01507: database not mounted
SQL> alter database mount;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying control file, check alert log for more info
SQL>
Did anyone experience similar problem?

>> Not sure if that was the problem though
But it is a good possible suspect. My (x86, not x64) oraclexe folder takes up about 1.1GiB, although part of that is archivelog files. Can't recall the exact amount of space consumed right at install time but 1GiB of freespace is cutting it very close indeed.

Ocfs2 mounting problem

Similar Messages

Maybe you are looking for