Ocfs2 problem with heartbeating

I'm trying to setup 2 SUSE10 boxes with iscsi and ocfs2. I installed and configured ocfs2-1.1.1 and the tools for that version. I am able to start ocfs2 and mount the fs. But on 1 of the nodes, the /var/log/messages is showing this:
Mar 21 19:46:28 test-san2 kernel: (15083,0):o2hb_do_disk_heartbeat:819 ERROR: Device "sda1": another node is heartbeating in our slot!
Mar 21 19:46:30 test-san2 kernel: (15083,0):o2hb_do_disk_heartbeat:819 ERROR: Device "sda1": another node is heartbeating in our slot!
and it keeps going, every 2 seconds. My cluster.conf has different IP addresses and node numbers. Not sure how its conflicting. And when I startup the cluster and ocfs2 I get this in my /var/log/messages, so they don't look like they are conflict too.
Mar 21 19:52:35 test-san1 kernel: ocfs2: Mounting device (8,17) on (node 2, slot 1)
Mar 21 19:24:31 test-san2 kernel: ocfs2: Mounting device (8,1) on (node 1, slot 0)
If anyone has an idea where to start with dealing with this issue, please tell me. Thanks

Hi,
actually i have the same problem.
I`m running OCFS2 on 2 debian GNU/Linux Boxes with iSCSI.
The Cluster-Config is the same on all nodes:
node:
ip_port = 7777
ip_address = 10.0.0.1
number = 1
name = xenserv-lin-01
cluster = xen
node:
ip_port = 7777
ip_address = 10.0.0.2
number = 2
name = xenserv-lin-02
cluster = xen
cluster:
node_count = 2
name = xen
After starting the cluster and mounting the Block-Device the following Erros occours:
(4072,0):o2hb_do_disk_heartbeat:822 ERROR: Device "md0": another node is heartbeating in our slot!
(3943,0):o2net_connect_expired:1432 ERROR: no connection established with node 2 after 10 seconds, giving up and returning errors.
Do you have any ideas?
Kind regards,
Sebastian

Similar Messages

  • OCFS2 problem with Redhat Linux Update 1

    Hi all,
    I get the following error when I tried to mount the ocfs2 partition:
    ===============
    [root@linux1 log]# mount -t ocfs2 -o datavolume /dev/sda1 /u02/oradata/orcl
    mount.ocfs2: No such device while mounting /dev/sda1 on /u02/oradata/orcl
    ================
    in the /var/log/messages:
    ============================================
    Mar 19 19:17:48 linux1 modprobe: FATAL: Error inserting ocfs2 (/lib/modules/2.6.
    9-11.EL/kernel/fs/ocfs2/ocfs2.ko): Unknown symbol in module, or unknown paramete
    r (see dmesg)
    Mar 19 19:17:48 linux1 kernel: ocfs2: Unknown symbol generic_drop_inode
    ===========================================
    My kernel version is:
    ===================
    [root@linux2 etc]# uname -r
    2.6.9-11.EL
    ==================
    My installed OCFS2 version is:
    ====================
    [root@linux2 etc]# rpm -qa |grep ocfs2
    ocfs2-tools-1.2.0-1
    ocfs2console-1.2.0-1
    ocfs2-2.6.9-11.0.0.10.3.EL-1.0.4-1
    =======================
    I don't think i have the right ocfs2 kernel for my verion of Linux. I can't seem to find ocfs2 for 2.6.9-11 in http://oss.oracle.com/projects/ocfs2/files/
    Questions:
    1) Do I need to update my Linux?
    2) Where can I find ocfs2 for 2.6.9-11?
    Thanks,

    Does not mean that Apple's proprietary EFI is what RHEL expects to see. I run UEFI on PC and Windows 8. Won't work on Mac Pro.
    you  need to pull other drives out during install.
    You don't 'use Boot Camp for Linux or non-Windows.
    I''d pick up one of the newer WD 10K VRs while at it - 250GB $152 200MB/s
    People have run Windows Server 2008 and run VMs under it, or run multiple VMs on Mac Pro and been happy -
    But start wtih a hard drive for RH and format it from the installer, and pull everything else.

  • Hello. I have a problem with OEL 6.5 and ocfs2. When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.

    Hello.
    I have a problem with OEL 6.5 and ocfs2.
    When I mount ocfs2 with mount -a command all ocfs2 partitions mount and work, but when I reboot no ocfs2 partitions auto mount. No error messages in log. I use DAS FC and iSCSI FC.
    fstab:
    UUID=32130a0b-2e15-4067-9e65-62b7b3e53c72 /some/4 ocfs2 _netdev,defaults 0 0
    #UUID=af522894-c51e-45d6-bce8-c0206322d7ab /some/9 ocfs2 _netdev,defaults 0 0
    UUID=1126b3d2-09aa-4be0-8826-0b2a590ab995 /some/3 ocfs2 _netdev,defaults 0 0
    #UUID=9ea9113d-edcf-47ca-9c64-c0d4e18149c1 /some/8 ocfs2 _netdev,defaults 0 0
    UUID=a368f830-0808-4832-b294-d2d1bf909813 /some/5 ocfs2 _netdev,defaults 0 0
    UUID=ee816860-5a95-493c-8559-9d528e557a6d /some/6 ocfs2 _netdev,defaults 0 0
    UUID=3f87634f-7dbf-46ba-a84c-e8606b40acfe /some/7 ocfs2 _netdev,defaults 0 0
    UUID=5def16d7-1f58-4691-9d46-f3fa72b74890 /some/1 ocfs2 _netdev,defaults 0 0
    UUID=0e682b5a-8d75-40d1-8983-fa39dd5a0e54 /some/2 ocfs2 _netdev,defaults 0 0

    What is the output of:
    # chkconfig --list o2cb
    # chkconfig --list ocfs2
    # cat /etc/ocfs2/cluster.conf

  • Problem with Configuring Tomcat for running jsp web applications..Plz HELP

    I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
    to connect to the database. I have placed my project folder called
    tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
    a collection of html pages,jsp pages and images of my project. Also I created a
    WEB-INF folderand in that I have lib folder which contains catalina-root.jar
    , classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
    file which looks like this
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!--
    Copyright 2004 The Apache Software Foundation
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    -->
    <web-app>
    <resource-ref>
    <description>Oracle Datasource example</description>
    <res-ref-name>jdbc/gdn</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    </resource-ref>
    </web-app>
    My Server.xml file in Tomcat\conf folder is as follows
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN">
    <!-- Comment these entries out to disable JMX MBeans support used for the
    administration web application -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved"
    factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
    pathname="conf/tomcat-users.xml" />
    <Resource name="jdbc/gdn" auth="Container"
    type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
    url="jdbc:odbc:gdn"
    username="system" password="tiger" maxActive="20" maxIdle="10"
    maxWait="-1"/>
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Catalina">
    <!-- A "Connector" represents an endpoint by which requests are received
    and responses are returned. Each Connector passes requests on to the
    associated "Container" (normally an Engine) for processing.
    By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
    You can also enable an SSL HTTP/1.1 Connector on port 8443 by
    following the instructions below and uncommenting the second Connector
    entry. SSL support requires the following steps (see the SSL Config
    HOWTO in the Tomcat 5 documentation bundle for more detailed
    instructions):
    * If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
    later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
    * Execute:
    %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
    $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
    with a password value of "changeit" for both the certificate and
    the keystore itself.
    By default, DNS lookups are enabled when a web application calls
    request.getRemoteHost(). This can have an adverse impact on
    performance, so you can disable it by setting the
    "enableLookups" attribute to "false". When DNS lookups are disabled,
    request.getRemoteHost() will return the String version of the
    IP address of the remote client.
    -->
    <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
    <Connector
    port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" redirectPort="8443" acceptCount="100"
    connectionTimeout="20000" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to 0 -->
         <!-- Note : To use gzip compression you could set the following properties :
                   compression="on"
                   compressionMinSize="2048"
                   noCompressionUserAgents="gozilla, traviata"
                   compressableMimeType="text/html,text/xml"
         -->
    <!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector port="8443"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" disableUploadTimeout="true"
    acceptCount="100" scheme="https" secure="true"
    clientAuth="false" sslProtocol="TLS" />
    -->
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009"
    enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector port="8082"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" acceptCount="100" connectionTimeout="20000"
    proxyPort="80" disableUploadTimeout="true" />
    -->
    <!-- An Engine represents the entry point (within Catalina) that processes
    every request. The Engine implementation for Tomcat stand alone
    analyzes the HTTP headers included with the request, and passes them
    on to the appropriate Host (virtual host). -->
    <!-- You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
    -->
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Catalina" defaultHost="localhost">
    <!-- The request dumper valve dumps useful debugging information about
    the request headers and cookies that were received, and the response
    headers and cookies that were sent, for all requests received by
    this instance of Tomcat. If you care only about requests to a
    particular virtual host, or a particular application, nest this
    element inside the corresponding <Host> or <Context> entry instead.
    For a similar mechanism that is portable to all Servlet 2.4
    containers, check out the "RequestDumperFilter" Filter in the
    example application (the source for this filter may be found in
    "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
    Request dumping is disabled by default. Uncomment the following
    element to enable it. -->
    <!--
    <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
    -->
    <!-- Because this Realm is here, an instance will be shared globally -->
    <!-- This Realm uses the UserDatabase configured in the global JNDI
    resources under the key "UserDatabase". Any edits
    that are performed against this UserDatabase are immediately
    available for use by the Realm. -->
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    resourceName="UserDatabase"/>
    <!-- Comment out the old realm but leave here for now in case we
    need to go back quickly -->
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <!-- Replace the above Realm with one of the following to get a Realm
    stored in a database and accessed via JDBC -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="org.gjt.mm.mysql.Driver"
    connectionURL="jdbc:mysql://localhost/authority"
    connectionName="test" connectionPassword="test"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
    connectionName="scott" connectionPassword="tiger"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="sun.jdbc.odbc.JdbcOdbcDriver"
    connectionURL="jdbc:odbc:CATALINA"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!-- Define the default virtual host
    Note: XML Schema validation will not work with Xerces 2.2.
    -->
    <Host name="localhost" appBase="webapps"
    unpackWARs="true" autoDeploy="true"
    xmlValidation="false" xmlNamespaceAware="false">
    <!-- Defines a cluster for this node,
    By defining this element, means that every manager will be changed.
    So when running a cluster, only make sure that you have webapps in there
    that need to be clustered and remove the other ones.
    A cluster has the following parameters:
    className = the fully qualified name of the cluster class
    name = a descriptive name for your cluster, can be anything
    mcastAddr = the multicast address, has to be the same for all the nodes
    mcastPort = the multicast port, has to be the same for all the nodes
    mcastBindAddr = bind the multicast socket to a specific address
    mcastTTL = the multicast TTL if you want to limit your broadcast
    mcastSoTimeout = the multicast readtimeout
    mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
    mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
    tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
    tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
    in case of multiple ethernet cards.
    auto means that address becomes
    InetAddress.getLocalHost().getHostAddress()
    tcpListenPort = the tcp listen port
    tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
    has a wakup bug in java.nio. Set to 0 for no timeout
    printToScreen = true means that managers will also print to std.out
    expireSessionsOnShutdown = true means that
    useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
    false means to replicate the session after each request.
    false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
    <%
    HashMap map = (HashMap)session.getAttribute("map");
    map.put("key","value");
    %>
    replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
    * Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
    * Synchronous means that the thread that executes the request, is also the
    thread the replicates the data to the other nodes, and will not return until all
    nodes have received the information.
    * Asynchronous means that there is a specific 'sender' thread for each cluster node,
    so the request thread will queue the replication request into a "smart" queue,
    and then return to the client.
    The "smart" queue is a queue where when a session is added to the queue, and the same session
    already exists in the queue from a previous request, that session will be replaced
    in the queue instead of replicating two requests. This almost never happens, unless there is a
    large network delay.
    -->
    <!--
    When configuring for clustering, you also add in a valve to catch all the requests
    coming in, at the end of the request, the session may or may not be replicated.
    A session is replicated if and only if all the conditions are met:
    1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
    2. a session exists (has been created)
    3. the request is not trapped by the "filter" attribute
    The filter attribute is to filter out requests that could not modify the session,
    hence we don't replicate the session after the end of this request.
    The filter is negative, ie, anything you put in the filter, you mean to filter out,
    ie, no replication will be done on requests that match one of the filters.
    The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
    filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
    ending with .gif and .js are intercepted.
    The deployer element can be used to deploy apps cluster wide.
    Currently the deployment only deploys/undeploys to working members in the cluster
    so no WARs are copied upons startup of a broken node.
    The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
    When a new war file is added the war gets deployed to the local instance,
    and then deployed to the other instances in the cluster.
    When a war file is deleted from the watchDir the war is undeployed locally
    and cluster wide
    -->
    <!--
    <Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
    managerClassName="org.apache.catalina.cluster.session.DeltaManager"
    expireSessionsOnShutdown="false"
    useDirtyFlag="true"
    notifyListenersOnReplication="true">
    <Membership
    className="org.apache.catalina.cluster.mcast.McastService"
    mcastAddr="228.0.0.4"
    mcastPort="45564"
    mcastFrequency="500"
    mcastDropTime="3000"/>
    <Receiver
    className="org.apache.catalina.cluster.tcp.ReplicationListener"
    tcpListenAddress="auto"
    tcpListenPort="4001"
    tcpSelectorTimeout="100"
    tcpThreadCount="6"/>
    <Sender
    className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
    replicationMode="pooled"
    ackTimeout="15000"/>
    <Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
    filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
    <Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
    tempDir="/tmp/war-temp/"
    deployDir="/tmp/war-deploy/"
    watchDir="/tmp/war-listen/"
    watchEnabled="false"/>
    </Cluster>
    -->
    <!-- Normally, users must authenticate themselves to each web app
    individually. Uncomment the following entry if you would like
    a user to be authenticated the first time they encounter a
    resource protected by a security constraint, and then have that
    user identity maintained across all web applications contained
    in this virtual host. -->
    <!--
    <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.AccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    This access log implementation is optimized for maximum performance,
    but is hardcoded to support only the "common" and "combined" patterns.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
    </Host>
    </Engine>
    </Service>
    </Server>
    I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
    My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
    in a browser. Here I accept a username and password from the user and then do the validation in
    a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
    accordingly. However when I enter the username and password and click Go in the homepage, nothing is
    displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
    WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
    WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
    IS IT POSSIBLE?WHY WILL THIS HAPPEN?
    I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
    Is there any other thing that I need to set in classpath? Should I have my project as a
    WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

    I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
    to connect to the database. I have placed my project folder called
    tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
    a collection of html pages,jsp pages and images of my project. Also I created a
    WEB-INF folderand in that I have lib folder which contains catalina-root.jar
    , classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
    file which looks like this
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!--
    Copyright 2004 The Apache Software Foundation
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
    -->
    <web-app>
    <resource-ref>
    <description>Oracle Datasource example</description>
    <res-ref-name>jdbc/gdn</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    </resource-ref>
    </web-app>
    My Server.xml file in Tomcat\conf folder is as follows
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN">
    <!-- Comment these entries out to disable JMX MBeans support used for the
    administration web application -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved"
    factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
    pathname="conf/tomcat-users.xml" />
    <Resource name="jdbc/gdn" auth="Container"
    type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
    url="jdbc:odbc:gdn"
    username="system" password="tiger" maxActive="20" maxIdle="10"
    maxWait="-1"/>
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Catalina">
    <!-- A "Connector" represents an endpoint by which requests are received
    and responses are returned. Each Connector passes requests on to the
    associated "Container" (normally an Engine) for processing.
    By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
    You can also enable an SSL HTTP/1.1 Connector on port 8443 by
    following the instructions below and uncommenting the second Connector
    entry. SSL support requires the following steps (see the SSL Config
    HOWTO in the Tomcat 5 documentation bundle for more detailed
    instructions):
    * If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
    later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
    * Execute:
    %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
    $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
    with a password value of "changeit" for both the certificate and
    the keystore itself.
    By default, DNS lookups are enabled when a web application calls
    request.getRemoteHost(). This can have an adverse impact on
    performance, so you can disable it by setting the
    "enableLookups" attribute to "false". When DNS lookups are disabled,
    request.getRemoteHost() will return the String version of the
    IP address of the remote client.
    -->
    <!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
    <Connector
    port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" redirectPort="8443" acceptCount="100"
    connectionTimeout="20000" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to 0 -->
         <!-- Note : To use gzip compression you could set the following properties :
                   compression="on"
                   compressionMinSize="2048"
                   noCompressionUserAgents="gozilla, traviata"
                   compressableMimeType="text/html,text/xml"
         -->
    <!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector port="8443"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" disableUploadTimeout="true"
    acceptCount="100" scheme="https" secure="true"
    clientAuth="false" sslProtocol="TLS" />
    -->
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <Connector port="8009"
    enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector port="8082"
    maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
    enableLookups="false" acceptCount="100" connectionTimeout="20000"
    proxyPort="80" disableUploadTimeout="true" />
    -->
    <!-- An Engine represents the entry point (within Catalina) that processes
    every request. The Engine implementation for Tomcat stand alone
    analyzes the HTTP headers included with the request, and passes them
    on to the appropriate Host (virtual host). -->
    <!-- You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
    -->
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Catalina" defaultHost="localhost">
    <!-- The request dumper valve dumps useful debugging information about
    the request headers and cookies that were received, and the response
    headers and cookies that were sent, for all requests received by
    this instance of Tomcat. If you care only about requests to a
    particular virtual host, or a particular application, nest this
    element inside the corresponding <Host> or <Context> entry instead.
    For a similar mechanism that is portable to all Servlet 2.4
    containers, check out the "RequestDumperFilter" Filter in the
    example application (the source for this filter may be found in
    "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
    Request dumping is disabled by default. Uncomment the following
    element to enable it. -->
    <!--
    <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
    -->
    <!-- Because this Realm is here, an instance will be shared globally -->
    <!-- This Realm uses the UserDatabase configured in the global JNDI
    resources under the key "UserDatabase". Any edits
    that are performed against this UserDatabase are immediately
    available for use by the Realm. -->
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    resourceName="UserDatabase"/>
    <!-- Comment out the old realm but leave here for now in case we
    need to go back quickly -->
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <!-- Replace the above Realm with one of the following to get a Realm
    stored in a database and accessed via JDBC -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="org.gjt.mm.mysql.Driver"
    connectionURL="jdbc:mysql://localhost/authority"
    connectionName="test" connectionPassword="test"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
    connectionName="scott" connectionPassword="tiger"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm"
    driverName="sun.jdbc.odbc.JdbcOdbcDriver"
    connectionURL="jdbc:odbc:CATALINA"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!-- Define the default virtual host
    Note: XML Schema validation will not work with Xerces 2.2.
    -->
    <Host name="localhost" appBase="webapps"
    unpackWARs="true" autoDeploy="true"
    xmlValidation="false" xmlNamespaceAware="false">
    <!-- Defines a cluster for this node,
    By defining this element, means that every manager will be changed.
    So when running a cluster, only make sure that you have webapps in there
    that need to be clustered and remove the other ones.
    A cluster has the following parameters:
    className = the fully qualified name of the cluster class
    name = a descriptive name for your cluster, can be anything
    mcastAddr = the multicast address, has to be the same for all the nodes
    mcastPort = the multicast port, has to be the same for all the nodes
    mcastBindAddr = bind the multicast socket to a specific address
    mcastTTL = the multicast TTL if you want to limit your broadcast
    mcastSoTimeout = the multicast readtimeout
    mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
    mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
    tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
    tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
    in case of multiple ethernet cards.
    auto means that address becomes
    InetAddress.getLocalHost().getHostAddress()
    tcpListenPort = the tcp listen port
    tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
    has a wakup bug in java.nio. Set to 0 for no timeout
    printToScreen = true means that managers will also print to std.out
    expireSessionsOnShutdown = true means that
    useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
    false means to replicate the session after each request.
    false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
    <%
    HashMap map = (HashMap)session.getAttribute("map");
    map.put("key","value");
    %>
    replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
    * Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
    * Synchronous means that the thread that executes the request, is also the
    thread the replicates the data to the other nodes, and will not return until all
    nodes have received the information.
    * Asynchronous means that there is a specific 'sender' thread for each cluster node,
    so the request thread will queue the replication request into a "smart" queue,
    and then return to the client.
    The "smart" queue is a queue where when a session is added to the queue, and the same session
    already exists in the queue from a previous request, that session will be replaced
    in the queue instead of replicating two requests. This almost never happens, unless there is a
    large network delay.
    -->
    <!--
    When configuring for clustering, you also add in a valve to catch all the requests
    coming in, at the end of the request, the session may or may not be replicated.
    A session is replicated if and only if all the conditions are met:
    1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
    2. a session exists (has been created)
    3. the request is not trapped by the "filter" attribute
    The filter attribute is to filter out requests that could not modify the session,
    hence we don't replicate the session after the end of this request.
    The filter is negative, ie, anything you put in the filter, you mean to filter out,
    ie, no replication will be done on requests that match one of the filters.
    The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
    filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
    ending with .gif and .js are intercepted.
    The deployer element can be used to deploy apps cluster wide.
    Currently the deployment only deploys/undeploys to working members in the cluster
    so no WARs are copied upons startup of a broken node.
    The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
    When a new war file is added the war gets deployed to the local instance,
    and then deployed to the other instances in the cluster.
    When a war file is deleted from the watchDir the war is undeployed locally
    and cluster wide
    -->
    <!--
    <Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
    managerClassName="org.apache.catalina.cluster.session.DeltaManager"
    expireSessionsOnShutdown="false"
    useDirtyFlag="true"
    notifyListenersOnReplication="true">
    <Membership
    className="org.apache.catalina.cluster.mcast.McastService"
    mcastAddr="228.0.0.4"
    mcastPort="45564"
    mcastFrequency="500"
    mcastDropTime="3000"/>
    <Receiver
    className="org.apache.catalina.cluster.tcp.ReplicationListener"
    tcpListenAddress="auto"
    tcpListenPort="4001"
    tcpSelectorTimeout="100"
    tcpThreadCount="6"/>
    <Sender
    className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
    replicationMode="pooled"
    ackTimeout="15000"/>
    <Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
    filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
    <Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
    tempDir="/tmp/war-temp/"
    deployDir="/tmp/war-deploy/"
    watchDir="/tmp/war-listen/"
    watchEnabled="false"/>
    </Cluster>
    -->
    <!-- Normally, users must authenticate themselves to each web app
    individually. Uncomment the following entry if you would like
    a user to be authenticated the first time they encounter a
    resource protected by a security constraint, and then have that
    user identity maintained across all web applications contained
    in this virtual host. -->
    <!--
    <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.AccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    This access log implementation is optimized for maximum performance,
    but is hardcoded to support only the "common" and "combined" patterns.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
    </Host>
    </Engine>
    </Service>
    </Server>
    I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
    My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
    in a browser. Here I accept a username and password from the user and then do the validation in
    a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
    accordingly. However when I enter the username and password and click Go in the homepage, nothing is
    displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
    WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
    WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
    IS IT POSSIBLE?WHY WILL THIS HAPPEN?
    I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
    Is there any other thing that I need to set in classpath? Should I have my project as a
    WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

  • [SOLVED]Asus UX32VD, problems with ACPI and Intel video driver

    1. The bigger problem seems to be Intel video driver:
    When xf86-video-intel is installed, screen stays black after booting. By adding "nomodeset" to grub doesn't help. If I don't start gdm while booting, I can boot to command line with "nomodeset".  From command line I tried "startx", but X doesn't start, probably because "nomodeset" has disabled KMS and I've understood that Intel driver needs KMS for GNOME.
    When xf86-video-vesa is installed instead of intel driver, screen is still black. By adding "nomodeset" to grub, I can see only mouse at gdm. If rebooting computer without gdm, I can start gnome from command line with startx and it works nice.
    In both setups I can connect to laptop with ssh when screen is black. With ssh I checked screen brightness, but it was maximum.
    Intel driver version: xf86-video-intel 2.20.1-3
    2. The problem with ACPI is found from dmesg, I don't think this effects to graphics problem, because with vesa driver and "acpi=off" set to grub I can start Gnome with startx. I don't even know if it effects at all on my system, dmesg shows error which effects to displayport( intel_dp_i2c_aux_ch error) these maybe related to each others:
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120320/psparse-536)
    [ 2.738789] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    [ 2.741836] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
    There is log files while booting with Intel driver and gdm set to start at boot in rc.conf, the screen is black, but got logs with ssh:
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
    [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040005000 - 00000000c97be000 (usable)
    [ 0.000000] BIOS-e820: 00000000c97be000 - 00000000c9dbf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000c9dbf000 - 00000000c9dc2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9dc2000 - 00000000c9dd7000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9dd7000 - 00000000c9ddd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ddd000 - 00000000c9ddf000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ddf000 - 00000000c9de4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9de4000 - 00000000c9f3d000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f3d000 - 00000000c9f41000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f41000 - 00000000c9f8b000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f8b000 - 00000000c9f92000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9f92000 - 00000000c9f94000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9f94000 - 00000000c9fb2000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb2000 - 00000000c9fb5000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fb5000 - 00000000c9fb7000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fb7000 - 00000000c9fce000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fce000 - 00000000c9fd4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fd4000 - 00000000c9fdc000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fdc000 - 00000000c9fdd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fdd000 - 00000000c9fec000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9fec000 - 00000000c9fed000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9fed000 - 00000000c9ff8000 (usable)
    [ 0.000000] BIOS-e820: 00000000c9ff8000 - 00000000c9ffd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000c9ffd000 - 00000000ca01c000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca01c000 - 00000000ca01e000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca01e000 - 00000000ca032000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca032000 - 00000000ca033000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca033000 - 00000000ca045000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca045000 - 00000000ca06b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca06b000 - 00000000ca07f000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca07f000 - 00000000ca080000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca080000 - 00000000ca081000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca081000 - 00000000ca083000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca083000 - 00000000ca084000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca084000 - 00000000ca089000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca089000 - 00000000ca0a1000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca0a1000 - 00000000ca645000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ca645000 - 00000000ca8c5000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca8c5000 - 00000000ca8ca000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000ca8ca000 - 00000000ca8cb000 (usable)
    [ 0.000000] BIOS-e820: 00000000ca8cb000 - 00000000ca90e000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000ca90e000 - 00000000cad1d000 (usable)
    [ 0.000000] BIOS-e820: 00000000cad1d000 - 00000000caff4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000caff4000 - 00000000cb000000 (usable)
    [ 0.000000] BIOS-e820: 00000000cbc00000 - 00000000cfe00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000012f200000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by American Megatrends
    [ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
    [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
    [ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
    [ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a46000) (376MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037a46000-0x0000000037d1b000) (2MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037d1b000-0x0000000040004000) (130MB)
    [ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ea0f000) (1258MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000008ea0f000-0x00000000be4b2000) (762MB)
    [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000be4b2000-0x00000000be7b3000) (3MB)
    [ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x00000000be7b3000-0x00000000be7d2000) (0MB)
    [ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000be7d2000-0x00000000be7f1000) (0MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000be7f1000-0x00000000be808000) (0MB)
    [ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be808000-0x00000000be810000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000be810000-0x00000000be9c4000) (1MB)
    [ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000be9c4000-0x00000000be9ca000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000be9ca000-0x00000000bea2f000) (0MB)
    [ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bea2f000-0x00000000beb59000) (1MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beb59000-0x00000000beb5b000) (0MB)
    [ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000beb5b000-0x00000000bed30000) (1MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000bed30000-0x00000000c8613000) (152MB)
    [ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000c8613000-0x00000000c8617000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000c8617000-0x00000000c90e1000) (10MB)
    [ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000c90e1000-0x00000000c9789000) (6MB)
    [ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000c9789000-0x00000000c9794000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000c9794000-0x00000000c97be000) (0MB)
    [ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000c97be000-0x00000000c9dbf000) (6MB)
    [ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x00000000c9dbf000-0x00000000c9dc2000) (0MB)
    [ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000c9dc2000-0x00000000c9dd7000) (0MB)
    [ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000c9dd7000-0x00000000c9ddd000) (0MB)
    [ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000c9ddd000-0x00000000c9ddf000) (0MB)
    [ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000c9ddf000-0x00000000c9de4000) (0MB)
    [ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000c9de4000-0x00000000c9f3d000) (1MB)
    [ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000c9f3d000-0x00000000c9f41000) (0MB)
    [ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000c9f41000-0x00000000c9f8b000) (0MB)
    [ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000c9f8b000-0x00000000c9f92000) (0MB)
    [ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000c9f92000-0x00000000c9f94000) (0MB)
    [ 0.000000] efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000c9f94000-0x00000000c9fa1000) (0MB)
    [ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000c9fa1000-0x00000000c9fb2000) (0MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000c9fb2000-0x00000000c9fb5000) (0MB)
    [ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000c9fb5000-0x00000000c9fb7000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000c9fb7000-0x00000000c9fce000) (0MB)
    [ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000c9fce000-0x00000000c9fd4000) (0MB)
    [ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000c9fd4000-0x00000000c9fdc000) (0MB)
    [ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000c9fdc000-0x00000000c9fdd000) (0MB)
    [ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000c9fdd000-0x00000000c9fec000) (0MB)
    [ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000c9fec000-0x00000000c9fed000) (0MB)
    [ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000c9fed000-0x00000000c9ff8000) (0MB)
    [ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000c9ff8000-0x00000000c9ffd000) (0MB)
    [ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000c9ffd000-0x00000000ca01c000) (0MB)
    [ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca01c000-0x00000000ca01e000) (0MB)
    [ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000ca01e000-0x00000000ca032000) (0MB)
    [ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca032000-0x00000000ca033000) (0MB)
    [ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000ca033000-0x00000000ca045000) (0MB)
    [ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca045000-0x00000000ca06b000) (0MB)
    [ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000ca06b000-0x00000000ca07f000) (0MB)
    [ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca07f000-0x00000000ca080000) (0MB)
    [ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000ca080000-0x00000000ca081000) (0MB)
    [ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca081000-0x00000000ca083000) (0MB)
    [ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000ca083000-0x00000000ca084000) (0MB)
    [ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000ca084000-0x00000000ca089000) (0MB)
    [ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000ca089000-0x00000000ca0a1000) (0MB)
    [ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000ca0a1000-0x00000000ca101000) (0MB)
    [ 0.000000] efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca101000-0x00000000ca11b000) (0MB)
    [ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000ca11b000-0x00000000ca120000) (0MB)
    [ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000ca120000-0x00000000ca126000) (0MB)
    [ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000ca126000-0x00000000ca128000) (0MB)
    [ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000ca128000-0x00000000ca145000) (0MB)
    [ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000ca145000-0x00000000ca272000) (1MB)
    [ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000ca272000-0x00000000ca5da000) (3MB)
    [ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000ca5da000-0x00000000ca5e0000) (0MB)
    [ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000ca5e0000-0x00000000ca645000) (0MB)
    [ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000ca645000-0x00000000ca702000) (0MB)
    [ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000ca702000-0x00000000ca8ad000) (1MB)
    [ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000ca8ad000-0x00000000ca8b1000) (0MB)
    [ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000ca8b1000-0x00000000ca8c5000) (0MB)
    [ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000ca8c5000-0x00000000ca8c9000) (0MB)
    [ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000ca8c9000-0x00000000ca8ca000) (0MB)
    [ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ca8ca000-0x00000000ca8cb000) (0MB)
    [ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000ca8cb000-0x00000000ca90e000) (0MB)
    [ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ca90e000-0x00000000caa58000) (1MB)
    [ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000caa58000-0x00000000cacee000) (2MB)
    [ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000cacee000-0x00000000cacf3000) (0MB)
    [ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000cacf3000-0x00000000cacf7000) (0MB)
    [ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000cacf7000-0x00000000cad04000) (0MB)
    [ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000cad04000-0x00000000cad16000) (0MB)
    [ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000cad16000-0x00000000cad1d000) (0MB)
    [ 0.000000] efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000cad1d000-0x00000000caff4000) (2MB)
    [ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000caff4000-0x00000000cb000000) (0MB)
    [ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x0000000100000000-0x000000012f200000) (754MB)
    [ 0.000000] efi: mem99: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
    [ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
    [ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
    [ 0.000000] efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x12f200 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FE0000000 write-back
    [ 0.000000] 2 base 120000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
    [ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
    [ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
    [ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
    [ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000cbc00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
    [ 0.000000] 0000000000 - 00cb000000 page 2M
    [ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000012f200000
    [ 0.000000] 0100000000 - 012f200000 page 2M
    [ 0.000000] kernel direct mapping tables up to 12f200000 @ c978e000-c9794000
    [ 0.000000] RAMDISK: 37a46000 - 37d1b000
    [ 0.000000] ACPI: RSDP 00000000ca894000 00024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 00000000ca894088 00094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ca8a83b8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ca8941b8 141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000ca8c2f80 00040
    [ 0.000000] ACPI: APIC 00000000ca8a84b0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ca8a8528 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 00000000ca8a8570 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: MCFG 00000000ca8a8638 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000ca8a8678 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a90b8 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9d60 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ca8a9df8 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000ca8aa718 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
    [ 0.000000] ACPI: HPET 00000000ca8aa890 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ca8aa8c8 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ca8ab150 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMAR 00000000ca8abbe8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000012f200000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000012f200000
    [ 0.000000] NODE_DATA [000000012f1fc000 - 000000012f1fffff]
    [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0012f200
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040004
    [ 0.000000] 0: 0x00040005 -> 0x000c97be
    [ 0.000000] 0: 0x000c9dc2 -> 0x000c9dd7
    [ 0.000000] 0: 0x000c9ddd -> 0x000c9ddf
    [ 0.000000] 0: 0x000c9de4 -> 0x000c9f3d
    [ 0.000000] 0: 0x000c9f41 -> 0x000c9f8b
    [ 0.000000] 0: 0x000c9f92 -> 0x000c9f94
    [ 0.000000] 0: 0x000c9fb2 -> 0x000c9fb5
    [ 0.000000] 0: 0x000c9fb7 -> 0x000c9fce
    [ 0.000000] 0: 0x000c9fd4 -> 0x000c9fdc
    [ 0.000000] 0: 0x000c9fdd -> 0x000c9fec
    [ 0.000000] 0: 0x000c9fed -> 0x000c9ff8
    [ 0.000000] 0: 0x000c9ffd -> 0x000ca01c
    [ 0.000000] 0: 0x000ca01e -> 0x000ca032
    [ 0.000000] 0: 0x000ca033 -> 0x000ca045
    [ 0.000000] 0: 0x000ca06b -> 0x000ca07f
    [ 0.000000] 0: 0x000ca080 -> 0x000ca081
    [ 0.000000] 0: 0x000ca083 -> 0x000ca084
    [ 0.000000] 0: 0x000ca089 -> 0x000ca0a1
    [ 0.000000] 0: 0x000ca8ca -> 0x000ca8cb
    [ 0.000000] 0: 0x000ca90e -> 0x000cad1d
    [ 0.000000] 0: 0x000caff4 -> 0x000cb000
    [ 0.000000] 0: 0x00100000 -> 0x0012f200
    [ 0.000000] On node 0 totalpages: 1019347
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 11 pages reserved
    [ 0.000000] DMA zone: 3908 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 806020 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3016 pages used for memmap
    [ 0.000000] Normal zone: 190008 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    [ 0.000000] PM: Registered nosave memory: 00000000c97be000 - 00000000c9dbf000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dbf000 - 00000000c9dc2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9dd7000 - 00000000c9ddd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ddf000 - 00000000c9de4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f3d000 - 00000000c9f41000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f8b000 - 00000000c9f92000
    [ 0.000000] PM: Registered nosave memory: 00000000c9f94000 - 00000000c9fb2000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fb5000 - 00000000c9fb7000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fce000 - 00000000c9fd4000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fdc000 - 00000000c9fdd000
    [ 0.000000] PM: Registered nosave memory: 00000000c9fec000 - 00000000c9fed000
    [ 0.000000] PM: Registered nosave memory: 00000000c9ff8000 - 00000000c9ffd000
    [ 0.000000] PM: Registered nosave memory: 00000000ca01c000 - 00000000ca01e000
    [ 0.000000] PM: Registered nosave memory: 00000000ca032000 - 00000000ca033000
    [ 0.000000] PM: Registered nosave memory: 00000000ca045000 - 00000000ca06b000
    [ 0.000000] PM: Registered nosave memory: 00000000ca07f000 - 00000000ca080000
    [ 0.000000] PM: Registered nosave memory: 00000000ca081000 - 00000000ca083000
    [ 0.000000] PM: Registered nosave memory: 00000000ca084000 - 00000000ca089000
    [ 0.000000] PM: Registered nosave memory: 00000000ca0a1000 - 00000000ca645000
    [ 0.000000] PM: Registered nosave memory: 00000000ca645000 - 00000000ca8c5000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8c5000 - 00000000ca8ca000
    [ 0.000000] PM: Registered nosave memory: 00000000ca8cb000 - 00000000ca90e000
    [ 0.000000] PM: Registered nosave memory: 00000000cad1d000 - 00000000caff4000
    [ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cbc00000
    [ 0.000000] PM: Registered nosave memory: 00000000cbc00000 - 00000000cfe00000
    [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
    [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:28200000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ee00000 s82880 r8192 d23616 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999936
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3751436k/4966400k available (4538k kernel code, 889012k absent, 325952k reserved, 4307k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 1696.208 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.76 BogoMIPS (lpj=5654026)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000028] init_memory_mapping: 00000000cbc00000-00000000cfe00000
    [ 0.000032] 00cbc00000 - 00cfe00000 page 2M
    [ 0.151118] Security Framework initialized
    [ 0.151124] AppArmor: AppArmor disabled by boot time parameter
    [ 0.151478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.153001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.153673] Mount-cache hash table entries: 256
    [ 0.153885] Initializing cgroup subsys cpuacct
    [ 0.153888] Initializing cgroup subsys memory
    [ 0.153897] Initializing cgroup subsys devices
    [ 0.153899] Initializing cgroup subsys freezer
    [ 0.153901] Initializing cgroup subsys net_cls
    [ 0.153903] Initializing cgroup subsys blkio
    [ 0.153938] CPU: Physical Processor ID: 0
    [ 0.153940] CPU: Processor Core ID: 0
    [ 0.153946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.153947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.154505] mce: CPU supports 7 MCE banks
    [ 0.154520] CPU0: Thermal monitoring enabled (TM1)
    [ 0.154528] using mwait in idle threads.
    [ 0.155909] ACPI: Core revision 20120320
    [ 0.173638] ftrace: allocating 17828 entries in 70 pages
    [ 0.187014] DMAR: Host address width 36
    [ 0.187017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.187030] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.187033] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.187044] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.187046] DMAR: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
    [ 0.187049] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
    [ 0.187125] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.187127] HPET id 0 under DRHD base 0xfed91000
    [ 0.187335] Enabled IRQ remapping in x2apic mode
    [ 0.187337] Enabling x2apic
    [ 0.187339] Enabled x2apic
    [ 0.187348] Switched APIC routing to cluster x2apic.
    [ 0.187829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.220796] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
    [ 0.325329] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.325337] ... version: 3
    [ 0.325338] ... bit width: 48
    [ 0.325340] ... generic registers: 4
    [ 0.325342] ... value mask: 0000ffffffffffff
    [ 0.325343] ... max period: 000000007fffffff
    [ 0.325345] ... fixed-purpose events: 3
    [ 0.325347] ... event mask: 000000070000000f
    [ 0.345395] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.365318] Booting Node 0, Processors #1
    [ 0.379062] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.391966] #2
    [ 0.405760] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.418597] #3 Ok.
    [ 0.432328] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.432363] Brought up 4 CPUs
    [ 0.432366] Total of 4 processors activated (13575.06 BogoMIPS).
    [ 0.436881] devtmpfs: initialized
    [ 0.438137] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
    [ 0.438244] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
    [ 0.438288] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
    [ 0.439159] NET: Registered protocol family 16
    [ 0.439285] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.439288] ACPI: bus type pci registered
    [ 0.439359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.439363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.488790] PCI: Using configuration type 1 for base access
    [ 0.489423] bio: create slab <bio-0> at 0
    [ 0.489488] ACPI: Added _OSI(Module Device)
    [ 0.489490] ACPI: Added _OSI(Processor Device)
    [ 0.489492] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.489494] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.492750] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.496137] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.598886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.599592] ACPI: SSDT 00000000ca5f2018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600414] ACPI: Dynamic OEM Table Load:
    [ 0.600417] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.600767] ACPI: SSDT 00000000ca5f3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601622] ACPI: Dynamic OEM Table Load:
    [ 0.601626] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.601797] ACPI: SSDT 00000000ca5f4c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.602615] ACPI: Dynamic OEM Table Load:
    [ 0.602618] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.603483] ACPI: Interpreter enabled
    [ 0.603488] ACPI: (supports S0 S3 S4 S5)
    [ 0.603522] ACPI: Using IOAPIC for interrupt routing
    [ 0.709320] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.709614] ACPI: No dock devices found.
    [ 0.709618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.710040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.710623] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.710626] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.710629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.710632] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.710634] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.710637] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.710639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.710643] pci_root PNP0A08:00: host bridge window [mem 0xcfe00000-0xfeafffff]
    [ 0.710683] PCI host bridge to bus 0000:00
    [ 0.710686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.710688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.710691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.710693] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.710696] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.710698] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.710701] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.710703] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
    [ 0.710714] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.710765] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.710808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.710842] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.710857] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.710866] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.710873] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
    [ 0.710919] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.710933] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.711023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.711053] pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
    [ 0.711145] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.711176] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.711206] pci 0000:00:16.0: reg 10: [mem 0xf7922000-0xf792200f 64bit]
    [ 0.711301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.711353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.711380] pci 0000:00:1a.0: reg 10: [mem 0xf7920000-0xf79203ff]
    [ 0.711490] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.711525] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.711543] pci 0000:00:1b.0: reg 10: [mem 0xf7918000-0xf791bfff 64bit]
    [ 0.711626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.711657] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.711790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.711831] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.711963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.712027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.712052] pci 0000:00:1d.0: reg 10: [mem 0xf791f000-0xf791f3ff]
    [ 0.712164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.712196] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 0.712346] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.712370] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
    [ 0.712380] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
    [ 0.712391] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
    [ 0.712400] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
    [ 0.712410] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
    [ 0.712421] pci 0000:00:1f.2: reg 24: [mem 0xf791e000-0xf791e7ff]
    [ 0.712480] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.712505] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.712526] pci 0000:00:1f.3: reg 10: [mem 0xf791d000-0xf791d0ff 64bit]
    [ 0.712556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
    [ 0.712601] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.712629] pci 0000:00:1f.6: reg 10: [mem 0xf791c000-0xf791cfff 64bit]
    [ 0.712761] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
    [ 0.712778] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
    [ 0.712796] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.712814] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.712826] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
    [ 0.712839] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.718669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.718673] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.718677] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.718681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.718759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.719023] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
    [ 0.719239] pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf7801fff 64bit]
    [ 0.720103] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.725437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 0.725447] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.725477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.725613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 0.725684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.725749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.725903] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.726168] pci0000:00: ACPI _OSC control (0x18) granted
    [ 1.474997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    [ 1.475053] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
    [ 1.475105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
    [ 1.475207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 1.475309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
    [ 1.475359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
    [ 1.475453] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.475460] vgaarb: loaded
    [ 1.475461] vgaarb: bridge control possible 0000:00:02.0
    [ 1.475508] PCI: Using ACPI for IRQ routing
    [ 1.477328] PCI: pci_cache_line_size set to 64 bytes
    [ 1.477339] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 1.477421] reserve RAM buffer: 000000000009f000 - 000000000009ffff
    [ 1.477423] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
    [ 1.477426] reserve RAM buffer: 00000000c97be000 - 00000000cbffffff
    [ 1.477439] reserve RAM buffer: 00000000c9dd7000 - 00000000cbffffff
    [ 1.477451] reserve RAM buffer: 00000000c9ddf000 - 00000000cbffffff
    [ 1.477462] reserve RAM buffer: 00000000c9f3d000 - 00000000cbffffff
    [ 1.477473] reserve RAM buffer: 00000000c9f8b000 - 00000000cbffffff
    [ 1.477484] reserve RAM buffer: 00000000c9f94000 - 00000000cbffffff
    [ 1.477494] reserve RAM buffer: 00000000c9fb5000 - 00000000cbffffff
    [ 1.477504] reserve RAM buffer: 00000000c9fce000 - 00000000cbffffff
    [ 1.477514] reserve RAM buffer: 00000000c9fdc000 - 00000000cbffffff
    [ 1.477523] reserve RAM buffer: 00000000c9fec000 - 00000000cbffffff
    [ 1.477532] reserve RAM buffer: 00000000c9ff8000 - 00000000cbffffff
    [ 1.477540] reserve RAM buffer: 00000000ca01c000 - 00000000cbffffff
    [ 1.477548] reserve RAM buffer: 00000000ca032000 - 00000000cbffffff
    [ 1.477556] reserve RAM buffer: 00000000ca045000 - 00000000cbffffff
    [ 1.477563] reserve RAM buffer: 00000000ca07f000 - 00000000cbffffff
    [ 1.477569] reserve RAM buffer: 00000000ca081000 - 00000000cbffffff
    [ 1.477575] reserve RAM buffer: 00000000ca084000 - 00000000cbffffff
    [ 1.477581] reserve RAM buffer: 00000000ca0a1000 - 00000000cbffffff
    [ 1.477586] reserve RAM buffer: 00000000ca8cb000 - 00000000cbffffff
    [ 1.477590] reserve RAM buffer: 00000000cad1d000 - 00000000cbffffff
    [ 1.477593] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
    [ 1.477596] reserve RAM buffer: 000000012f200000 - 000000012fffffff
    [ 1.477696] NetLabel: Initializing
    [ 1.477698] NetLabel: domain hash size = 128
    [ 1.477699] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.477713] NetLabel: unlabeled traffic allowed by default
    [ 1.477738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.477746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.479760] Switching to clocksource hpet
    [ 1.485853] pnp: PnP ACPI init
    [ 1.485869] ACPI: bus type pnp registered
    [ 1.486219] pnp 00:00: [bus 00-3e]
    [ 1.486224] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.486226] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.486229] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.486231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.486234] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.486236] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.486238] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.486241] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.486243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.486246] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.486248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.486250] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.486253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.486255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.486257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.486260] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.486262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.486264] pnp 00:00: [mem 0xcfe00000-0xfeafffff window]
    [ 1.486267] pnp 00:00: [mem 0x00010000-0x0001ffff window]
    [ 1.486345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.486376] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 1.486418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 1.486422] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.533253] pnp 00:02: [io 0x0000-0x001f]
    [ 1.533255] pnp 00:02: [io 0x0081-0x0091]
    [ 1.533257] pnp 00:02: [io 0x0093-0x009f]
    [ 1.533259] pnp 00:02: [io 0x00c0-0x00df]
    [ 1.533262] pnp 00:02: [dma 4]
    [ 1.533297] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.533306] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 1.533336] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.533438] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 1.533473] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.533487] pnp 00:05: [io 0x002e-0x002f]
    [ 1.533489] pnp 00:05: [io 0x004e-0x004f]
    [ 1.533491] pnp 00:05: [io 0x0061]
    [ 1.533493] pnp 00:05: [io 0x0063]
    [ 1.533495] pnp 00:05: [io 0x0065]
    [ 1.533497] pnp 00:05: [io 0x0067]
    [ 1.533498] pnp 00:05: [io 0x0070]
    [ 1.533500] pnp 00:05: [io 0x0080]
    [ 1.533502] pnp 00:05: [io 0x0092]
    [ 1.533504] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.533506] pnp 00:05: [io 0x0680-0x069f]
    [ 1.533508] pnp 00:05: [io 0x0200-0x020f]
    [ 1.533510] pnp 00:05: [io 0xffff]
    [ 1.533512] pnp 00:05: [io 0xffff]
    [ 1.533514] pnp 00:05: [io 0x0400-0x0453]
    [ 1.533518] pnp 00:05: [io 0x0458-0x047f]
    [ 1.533520] pnp 00:05: [io 0x0500-0x057f]
    [ 1.533522] pnp 00:05: [io 0x164e-0x164f]
    [ 1.533573] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.533576] system 00:05: [io 0x0200-0x020f] has been reserved
    [ 1.533579] system 00:05: [io 0xffff] has been reserved
    [ 1.533581] system 00:05: [io 0xffff] has been reserved
    [ 1.533584] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 1.533587] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 1.533590] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.533592] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.533596] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533606] pnp 00:06: [io 0x0070-0x0077]
    [ 1.533620] pnp 00:06: [irq 8]
    [ 1.533653] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.533685] pnp 00:07: [io 0x0454-0x0457]
    [ 1.533733] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 1.533737] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.533764] pnp 00:08: [io 0x0010-0x001f]
    [ 1.533767] pnp 00:08: [io 0x0022-0x003f]
    [ 1.533769] pnp 00:08: [io 0x0044-0x005f]
    [ 1.533771] pnp 00:08: [io 0x0072-0x007f]
    [ 1.533773] pnp 00:08: [io 0x0080]
    [ 1.533774] pnp 00:08: [io 0x0084-0x0086]
    [ 1.533776] pnp 00:08: [io 0x0088]
    [ 1.533778] pnp 00:08: [io 0x008c-0x008e]
    [ 1.533780] pnp 00:08: [io 0x0090-0x009f]
    [ 1.533782] pnp 00:08: [io 0x00a2-0x00bf]
    [ 1.533784] pnp 00:08: [io 0x00e0-0x00ef]
    [ 1.533786] pnp 00:08: [io 0x04d0-0x04d1]
    [ 1.533836] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 1.533840] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.533849] pnp 00:09: [io 0x00f0-0x00ff]
    [ 1.533858] pnp 00:09: [irq 13]
    [ 1.533892] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.533945] pnp 00:0a: [irq 12]
    [ 1.533982] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 1.534008] pnp 00:0b: [io 0x0060]
    [ 1.534010] pnp 00:0b: [io 0x0064]
    [ 1.534017] pnp 00:0b: [irq 1]
    [ 1.534053] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 1.534293] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
    [ 1.534295] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
    [ 1.534297] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
    [ 1.534300] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
    [ 1.534302] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
    [ 1.534304] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
    [ 1.534306] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
    [ 1.534308] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
    [ 1.534310] pnp 00:0c: [mem 0xff000000-0xffffffff]
    [ 1.534313] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
    [ 1.534315] pnp 00:0c: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534382] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.534385] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 1.534388] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.534392] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.534395] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.534398] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.534401] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.534404] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.534407] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
    [ 1.534413] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.534416] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534420] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534494] pnp 00:0d: [mem 0xcfe00000-0xcfe00fff]
    [ 1.534558] system 00:0d: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 1.534562] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.534715] pnp 00:0e: [mem 0x20000000-0x201fffff]
    [ 1.534718] pnp 00:0e: [mem 0x40004000-0x40004fff]
    [ 1.534783] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.534786] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
    [ 1.534790] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.534823] pnp: PnP ACPI: found 15 devices
    [ 1.534824] ACPI: ACPI bus type pnp unregistered
    [ 1.541624] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
    [ 1.541631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.541634] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 1.541638] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 1.541642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.541662] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.541670] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
    [ 1.541716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.541719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.541721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.541724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.541727] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.541729] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.541732] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.541734] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
    [ 1.541737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 1.541739] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 1.541742] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 1.541745] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
    [ 1.541791] NET: Registered protocol family 2
    [ 1.541920] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.542713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.544194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.544343] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.544346] TCP: reno registered
    [ 1.544359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544378] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.544464] NET: Registered protocol family 1
    [ 1.544482] pci 0000:00:02.0: Boot video device
    [ 1.579823] PCI: CLS 64 bytes, default 64
    [ 1.579868] Unpacking initramfs...
    [ 1.651952] Freeing initrd memory: 2900k freed
    [ 1.652345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.652349] Placing 64MB software IO TLB between ffff8800ba4b2000 - ffff8800be4b2000
    [ 1.652351] software IO TLB at phys 0xba4b2000 - 0xbe4b2000
    [ 1.652909] audit: initializing netlink socket (disabled)
    [ 1.652920] type=2000 audit(1343310419.543:1): initialized
    [ 1.653295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.655215] VFS: Disk quotas dquot_6.5.2
    [ 1.655264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.655387] msgmni has been set to 7683
    [ 1.655586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.655616] io scheduler noop registered
    [ 1.655619] io scheduler deadline registered
    [ 1.655674] io scheduler cfq registered (default)
    [ 1.655790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
    [ 1.656047] efifb: probing for efifb
    [ 1.658527] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
    [ 1.658530] efifb: mode is 1024x768x32, linelength=4096, pages=1
    [ 1.658532] efifb: scrolling: redraw
    [ 1.658534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.661755] Console: switching to colour frame buffer device 128x48
    [ 1.664865] fb0: EFI VGA frame buffer device
    [ 1.664872] intel_idle: does not run on family 6 model 58
    [ 1.664905] GHES: HEST is not enabled!
    [ 1.664976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.665554] Linux agpgart interface v0.103
    [ 1.665643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 1.667162] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.668312] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.668346] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.668370] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.668392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.668415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.668518] mousedev: PS/2 mouse device common for all mice
    [ 1.668581] rtc_cmos 00:06: RTC can wake from S4
    [ 1.668727] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.668756] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.668766] cpuidle: using governor ladder
    [ 1.668768] cpuidle: using governor menu
    [ 1.668897] TCP: cubic registered
    [ 1.669011] NET: Registered protocol family 10
    [ 1.669206] NET: Registered protocol family 17
    [ 1.669210] Registering the dns_resolver key type
    [ 1.669345] PM: Hibernation image not present or could not be loaded.
    [ 1.669352] registered taskstats version 1
    [ 1.669923] rtc_cmos 00:06: setting system clock to 2012-07-26 13:47:00 UTC (1343310420)
    [ 1.670074] Initializing network drop monitor service
    [ 1.671692] Freeing unused kernel memory: 740k freed
    [ 1.671810] Write protecting the kernel read-only data: 8192k
    [ 1.677537] Freeing unused kernel memory: 1588k freed
    [ 1.680114] Freeing unused kernel memory: 640k freed
    [ 1.688393] systemd-udevd[48]: starting version 186
    [ 1.702336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.729878] usbcore: registered new interface driver usbfs
    [ 1.729905] usbcore: registered new interface driver hub
    [ 1.729967] usbcore: registered new device driver usb
    [ 1.730626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.730703] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.730709] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.730735] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.730768] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.733581] SCSI subsystem initialized
    [ 1.734651] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.734672] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7920000
    [ 1.735298] libata version 3.00 loaded.
    [ 1.742916] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.743591] hub 1-0:1.0: USB hub found
    [ 1.743601] hub 1-0:1.0: 2 ports detected
    [ 1.743896] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.743903] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.743919] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.743958] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.747853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.747877] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf791f000
    [ 1.756260] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.756431] hub 2-0:1.0: USB hub found
    [ 1.756436] hub 2-0:1.0: 2 ports detected
    [ 1.756777] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 1.756784] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.756817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.756946] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.756957] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
    [ 1.757034] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.757594] xHCI xhci_add_endpoint called for root hub
    [ 1.757598] xHCI xhci_check_bandwidth called for root hub
    [ 1.757646] hub 3-0:1.0: USB hub found
    [ 1.757657] hub 3-0:1.0: 4 ports detected
    [ 1.757744] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.757751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.757848] xHCI xhci_add_endpoint called for root hub
    [ 1.757851] xHCI xhci_check_bandwidth called for root hub
    [ 1.757894] hub 4-0:1.0: USB hub found
    [ 1.757905] hub 4-0:1.0: 4 ports detected
    [ 1.759643] ahci 0000:00:1f.2: version 3.0
    [ 1.759745] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.759829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
    [ 1.759836] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.759845] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.766833] scsi0 : ahci
    [ 1.766937] scsi1 : ahci
    [ 1.767022] scsi2 : ahci
    [ 1.767101] scsi3 : ahci
    [ 1.767184] scsi4 : ahci
    [ 1.767262] scsi5 : ahci
    [ 1.767498] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 44
    [ 1.767503] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 44
    [ 1.767505] ata3: DUMMY
    [ 1.767507] ata4: DUMMY
    [ 1.767508] ata5: DUMMY
    [ 1.767510] ata6: DUMMY
    [ 2.049225] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.085851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.085878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.086220] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086306] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086310] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086526] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.086607] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.086610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.086623] ata2.00: ATA-9: SanDisk SSD i100 32GB, 11.50.00, max UDMA/133
    [ 2.086626] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [ 2.087041] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087128] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087131] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087143] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
    [ 2.087146] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.087320] ata2.00: configured for UDMA/133
    [ 2.087589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 2.087650] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 2.087669] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 2.087920] ata1.00: configured for UDMA/133
    [ 2.088043] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
    [ 2.088297] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 11.5 PQ: 0 ANSI: 5
    [ 2.093498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
    [ 2.093608] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.093612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.093648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.093819] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
    [ 2.093913] sd 1:0:0:0: [sdb] Write Protect is off
    [ 2.093919] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.093951] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.095497] sda: sda1 sda2
    [ 2.095893] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.096681] sdb: sdb1 sdb2 sdb3
    [ 2.096999] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 2.173153] hub 1-1:1.0: USB hub found
    [ 2.173332] hub 1-1:1.0: 6 ports detected
    [ 2.227030] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.332228] usb 3-3: new high-speed USB device number 2 using xhci_hcd
    [ 2.359348] usb 3-3: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.359354] usb 3-3: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 2.415509] systemd-udevd[144]: starting version 186
    [ 2.465386] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 2.465658] [drm] Initialized drm 1.1.0 20060810
    [ 2.468971] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.482290] ACPI: Lid Switch [LID]
    [ 2.483112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 2.483119] ACPI: Power Button [PWRB]
    [ 2.484540] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 2.484548] ACPI: Sleep Button [SLPB]
    [ 2.488074] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
    [ 2.488698] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 2.491571] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 2.491779] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 2.494298] ACPI: Requesting acpi_cpufreq
    [ 2.507995] i915 0000:00:02.0: setting latency timer to 64
    [ 2.530014] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.530018] ACPI: Thermal Zone [THRM] (52 C)
    [ 2.530047] ACPI: AC Adapter [AC0] (on-line)
    [ 2.532019] Monitor-Mwait will be used to enter C-1 state
    [ 2.532089] Monitor-Mwait will be used to enter C-2 state
    [ 2.532122] ACPI: acpi_idle registered with cpuidle
    [ 2.555771] ACPI: Battery Slot [BAT0] (battery present)
    [ 2.561573] wmi: Mapper loaded
    [ 2.564667] iTCO_vendor_support: vendor-support=0
    [ 2.565251] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 2.568922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 2.569169] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.569279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.584441] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.587955] MXM: GUID detected in BIOS
    [ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
    [ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
    [ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120

    Sometimes with Intel driver I can see mouse while loading gdm, but then it goes to black.
    I tried to boot with Intel driver with "drm.debug=14" and "log_buf_len=16M"  as boot parameters. There is debug log from gdm, it seems to have some errors, I have not yet looked deeble on it:
    gnome-session[1269]: DEBUG(+): Enabling debugging
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/Louis-laptop:@/tmp/.ICE-unix/1269,unix/Louis-laptop:/tmp/.ICE-unix/1269
    gnome-session[1269]: DEBUG(+): GsmShell: Not connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: setting client store 0xe4e070
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41c9e0
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
    gnome-session[1269]: DEBUG(+): fill: *** Getting session 'gdm-shell'
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
    gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
    gnome-session[1269]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
    gnome-session[1269]: DEBUG(+): fill: *** Checking required components and providers
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): fill: *** Done checking required components and providers
    gnome-session[1269]: DEBUG(+): fill: *** Adding required components
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
    gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
    gnome-session[1269]: DEBUG(+): fill: *** Done adding required components
    gnome-session[1269]: DEBUG(+): fill: *** Adding default providers
    gnome-session[1269]: DEBUG(+): fill: *** Done adding default providers
    gnome-session[1269]: DEBUG(+): GsmManager: GSM starting to manage
    gnome-session[1269]: DEBUG(+): GsmManager: App startup summary
    gnome-session[1269]: DEBUG(+): GsmManager: Phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: Phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: Phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: Phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1279
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418445168000000012690002 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1360
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
    gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient 10bba787d7390cc455134324418397061300000012690001
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418397061300000012690001 to session
    gnome-session[1269]: DEBUG(+): uid = 120
    gnome-session[1269]: DEBUG(+): pid = 1279
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): App gnome-settings-daemon.desktop registered
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase INITIALIZATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase PANEL
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase DESKTOP
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
    gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10bba787d7390cc455134324418396973400000012690000
    gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1369
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase APPLICATION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmPresence: adding idle watch
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
    gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Setting up new connection
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: New client '0xe99030 []'
    gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
    gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Initializing client 0xe99030 []
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 []' received RegisterClient(10bba787d7390cc455134324418396973400000012690000)
    gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418396973400000012690000 to session
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Set properties from client '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: ProcessID = '1369'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: handling signal 15
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
    gnome-session[1269]: DEBUG(+): Got callback for signal 15
    gnome-session[1269]: DEBUG(+): GsmManager: Logout called
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: requesting logout
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase RUNNING
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): Caught signal 15, shutting down normally.
    gnome-session[1269]: DEBUG(+): GdmSignalHandler: Done handling signals
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, 9, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: query end session complete
    gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase END_SESSION
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, c, 32771, 0)
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
    gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase END_SESSION
    gnome-session[1269]: DEBUG(+): Using ConsoleKit for session tracking
    gnome-session[1269]: DEBUG(+): GsmManager: starting phase EXIT
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]')
    gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received CloseConnection
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe99030
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
    gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000])
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
    gnome-session[1269]: DEBUG(+): GsmManager: unable to find application for client - not restarting
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe7ff30
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
    gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
    gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe9b020
    gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
    gnome-session[1269]: DEBUG(+): GsmManager: last client disconnected - exiting
    gnome-session[1269]: DEBUG(+): GsmManager: ending phase EXIT
    gnome-session[1269]: DEBUG(+): Unreffing manager
    gnome-session[1269]: DEBUG(+): GsmManager: disposing manager
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece830
    gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece910
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
    gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    (gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
    gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
    PolicyKit daemon disconnected from the bus.
    We are no longer a registered authentication agent.
    g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
    Window manager warning: Log level 16: gnome-shell: Fatal IO error 0 (Success) on X server :0.

  • I have one problem with Data Guard. My archive log files are not applied.

    I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
    I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
    In Enterprise Manager on Primary database it looks ok. I get the following message “Data Guard status Normal”
    But as I wrote above ”the archive log files are not applied”
    After I created the Physical Standby database, I have also done:
    1. I connected to the Physical Standby database instance.
    CONNECT SYS/SYS@luda AS SYSDBA
    2. I started the Oracle instance at the Physical Standby database without mounting the database.
    STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
    3. I mounted the Physical Standby database:
    ALTER DATABASE MOUNT STANDBY DATABASE
    4. I started redo apply on Physical Standby database
    alter database recover managed standby database disconnect from session
    5. I switched the log files on Physical Standby database
    alter system switch logfile
    6. I verified the redo data was received and archived on Physical Standby database
    select sequence#, first_time, next_time from v$archived_log order by sequence#
    SEQUENCE# FIRST_TIME NEXT_TIME
    3 2006-06-27 2006-06-27
    4 2006-06-27 2006-06-27
    5 2006-06-27 2006-06-27
    6 2006-06-27 2006-06-27
    7 2006-06-27 2006-06-27
    8 2006-06-27 2006-06-27
    7. I verified the archived redo log files were applied on Physical Standby database
    select sequence#,applied from v$archived_log;
    SEQUENCE# APP
    4 NO
    3 NO
    5 NO
    6 NO
    7 NO
    8 NO
    8. on Physical Standby database
    select * from v$archive_gap;
    No rows
    9. on Physical Standby database
    SELECT MESSAGE FROM V$DATAGUARD_STATUS;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARC0: Becoming the 'no FAL' ARCH
    ARC0: Becoming the 'no SRL' ARCH
    ARC1: Becoming the heartbeat ARCH
    Attempt to start background Managed Standby Recovery process
    MRP0: Background Managed Standby Recovery process started
    Managed Standby Recovery not using Real Time Apply
    MRP0: Background Media Recovery terminated with error 1110
    MRP0: Background Media Recovery process shutdown
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[1]: Assigned to RFS process 2148
    RFS[1]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[2]: Assigned to RFS process 2384
    RFS[2]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[3]: Assigned to RFS process 3188
    RFS[3]: Identified database type as 'physical standby'
    Primary database is in MAXIMUM PERFORMANCE mode
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[4]: Assigned to RFS process 3168
    RFS[4]: Identified database type as 'physical standby'
    RFS[4]: No standby redo logfiles created
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    10. on Physical Standby database
    SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
    PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 1 9 13664 2
    RFS IDLE 0 0 0 0
    10) on Primary database:
    select message from v$dataguard_status;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARCm: Becoming the 'no FAL' ARCH
    ARCm: Becoming the 'no SRL' ARCH
    ARCd: Becoming the heartbeat ARCH
    Error 1034 received logging on to the standby
    Error 1034 received logging on to the standby
    LGWR: Error 1034 creating archivelog file 'luda'
    LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
    FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
    11)on primary db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
    Luda 4 NO
    Luda 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
    Luda 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
    Luda 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
    Luda 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
    Luda 8 NO
    12) on standby db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
    13) my init.ora files
    On standby db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
    *.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_unique_name='luda'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='luda'
    *.fal_server='irina'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
    On primary db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
    *.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='irina'
    *.fal_server='luda'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
    Please help me!!!!

    Hi,
    After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
    Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
    In another session 'show configuration' results in the following, confirming that the enable succeeded.
    DGMGRL> show configuration
    Configuration
    Name: avhtest
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    avhtest - Primary database
    avhtestls53 - Physical standby database
    Current status for "avhtest":
    Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
    It there anybody that experienced the same problem and/or knows the solution to this?
    With kind regards,
    Martin Schaap

  • Problem with usb devices

    hi guys,
    i have a problem with my usb devices.
    the dmesg:
    Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009
    Command line: root=/dev/sda5 vga=0x0361 ro
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    Centaur CentaurHauls
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
    BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
    BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    DMI present.
    Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    last_pfn = 0x7fed0 max_arch_pfn = 0x100000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask F80000000 write-back
    1 base 07FF00000 mask FFFF00000 uncachable
    2 disabled
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009f800 (usable)
    modified: 000000000009f800 - 00000000000a0000 (reserved)
    modified: 00000000000ce000 - 00000000000d0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000007fed0000 (usable)
    modified: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
    modified: 000000007fee3000 - 0000000080000000 (reserved)
    modified: 00000000e0000000 - 00000000f0000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed00000 - 00000000fed00400 (reserved)
    modified: 00000000fed14000 - 00000000fed1a000 (reserved)
    modified: 00000000fed1c000 - 00000000fed90000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff000000 - 0000000100000000 (reserved)
    init_memory_mapping: 0000000000000000-000000007fed0000
    0000000000 - 007fe00000 page 2M
    007fe00000 - 007fed0000 page 4k
    kernel direct mapping tables up to 7fed0000 @ 10000-14000
    RAMDISK: 37d42000 - 37fefc39
    ACPI: RSDP 00000000000f7fe0 00024 (v02 PTLTD )
    ACPI: XSDT 000000007fedab41 0008C (v01 Sony VAIO 20070418 PTL 00000000)
    ACPI: FACP 000000007fee1bd2 000F4 (v03 Sony VAIO 20070418 PTL 00000001)
    ACPI: DSDT 000000007fedbeeb 05C73 (v02 Sony VAIO 20070418 PTL 20050624)
    ACPI: FACS 000000007fee2fc0 00040
    ACPI: APIC 000000007fee1cc6 00068 (v01 Sony VAIO 20070418 PTL 0000005A)
    ACPI: HPET 000000007fee1d2e 00038 (v01 Sony VAIO 20070418 PTL 0000005A)
    ACPI: MCFG 000000007fee1d66 0003C (v01 Sony VAIO 20070418 PTL 0000005A)
    ACPI: TCPA 000000007fee1da2 00032 (v01 Sony VAIO 20070418 PTL 00005A52)
    ACPI: SLIC 000000007fee1dd4 00176 (v01 Sony VAIO 20070418 PTL 01000000)
    ACPI: TMOR 000000007fee1f4a 00026 (v01 Sony VAIO 20070418 PTL 00000003)
    ACPI: APIC 000000007fee1f70 00068 (v01 Sony VAIO 20070418 PTL 00000000)
    ACPI: BOOT 000000007fee1fd8 00028 (v01 Sony VAIO 20070418 PTL 00000001)
    ACPI: SSDT 000000007fedbc29 002C2 (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: SSDT 000000007fedb159 0025F (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: SSDT 000000007fedb0b3 000A6 (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: SSDT 000000007fedabcd 004E6 (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: BIOS bug: multiple APIC/MADT found, using 0
    ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
    ACPI: Local APIC address 0xfee00000
    (7 early reservations) ==> bootmem [0000000000 - 007fed0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
    #2 [0000200000 - 000082d0d0] TEXT DATA BSS ==> [0000200000 - 000082d0d0]
    #3 [0037d42000 - 0037fefc39] RAMDISK ==> [0037d42000 - 0037fefc39]
    #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    #5 [000082e000 - 000082e204] BRK ==> [000082e000 - 000082e204]
    #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
    found SMP MP-table at [ffff8800000f8010] f8010
    [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00100000
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0007fed0
    On node 0 totalpages: 523871
    DMA zone: 56 pages used for memmap
    DMA zone: 1682 pages reserved
    DMA zone: 2245 pages, LIFO batch:0
    DMA32 zone: 7108 pages used for memmap
    DMA32 zone: 512780 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
    PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
    PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 25 pages at ffff880001010000, static data 72352 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515025
    Kernel command line: root=/dev/sda5 vga=0x0361 ro
    Initializing CPU#0
    NR_IRQS:768
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    Extended CMOS year: 2000
    Fast TSC calibration using PIT
    Detected 1994.610 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 2053736k/2095936k available (3409k kernel code, 452k absent, 41160k reserved, 1239k data, 464k init)
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    hpet clockevent registered
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.43 BogoMIPS (lpj=6648700)
    Security Framework initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    using mwait in idle threads.
    ACPI: Core revision 20090320
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3991.23 BogoMIPS (lpj=6649976)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Total of 2 processors activated (7982.67 BogoMIPS).
    CPU0 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 0 1
    CPU1 attaching sched-domain:
    domain 0: span 0-1 level MC
    groups: 1 0
    net_namespace: 1888 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: MCFG area at e0000000 reserved in E820
    PCI: Using MMCONFIG at e0000000 - efffffff
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE storm detected, transactions will use polling mode
    ACPI: EC: missing confirmations, switch off interrupt mode.
    [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in poll mode
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
    pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
    pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc404800-0xfc404bff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
    pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
    pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
    pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc404c00-0xfc404fff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
    pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
    pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
    pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
    pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
    pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
    pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
    pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
    pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
    pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc404000-0xfc4047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
    pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
    pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
    pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
    pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
    pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
    pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
    pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
    pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
    pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
    pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
    pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
    pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
    pci 0000:06:00.0: reg 10 32bit mmio: [0xfa000000-0xfa000fff]
    pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
    pci 0000:06:00.0: PME# disabled
    pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff]
    pci 0000:00:1c.2: bridge 32bit mmio: [0xfa000000-0xfbffffff]
    pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
    pci 0000:08:00.0: reg 10 64bit mmio: [0xfc000000-0xfc003fff]
    pci 0000:08:00.0: reg 18 io port: [0x6000-0x60ff]
    pci 0000:08:00.0: supports D1 D2
    pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:00.0: PME# disabled
    pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff]
    pci 0000:00:1c.4: bridge 32bit mmio: [0xfc000000-0xfc0fffff]
    pci 0000:09:03.0: reg 10 32bit mmio: [0xfc100000-0xfc100fff]
    pci 0000:09:03.0: supports D1 D2
    pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:09:03.0: PME# disabled
    pci 0000:09:03.1: reg 10 32bit mmio: [0xfc102000-0xfc1027ff]
    pci 0000:09:03.1: reg 14 32bit mmio: [0xfc104000-0xfc107fff]
    pci 0000:09:03.1: supports D1 D2
    pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:09:03.1: PME# disabled
    pci 0000:09:03.2: reg 10 32bit mmio: [0xfc101000-0xfc101fff]
    pci 0000:09:03.2: supports D1 D2
    pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:09:03.2: PME# disabled
    pci 0000:00:1e.0: transparent bridge
    pci 0000:00:1e.0: bridge 32bit mmio: [0xfc100000-0xfc1fffff]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    Switched to high resolution mode on CPU 0
    Switched to high resolution mode on CPU 1
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
    system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
    system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
    system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
    system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
    system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
    system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
    system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
    system 00:06: ioport range 0x680-0x69f has been reserved
    system 00:06: ioport range 0x800-0x80f has been reserved
    system 00:06: ioport range 0x1000-0x107f has been reserved
    system 00:06: ioport range 0x1180-0x11bf has been reserved
    system 00:06: ioport range 0x1640-0x164f has been reserved
    system 00:06: ioport range 0xfe00-0xfe7f has been reserved
    system 00:06: ioport range 0xfe80-0xfeff has been reserved
    pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
    pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:1c.0: IO window: 0x3000-0x3fff
    pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
    pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
    pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
    pci 0000:00:1c.1: IO window: 0x4000-0x4fff
    pci 0000:00:1c.1: MEM window: 0xf8000000-0xf9ffffff
    pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
    pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
    pci 0000:00:1c.2: IO window: 0x5000-0x5fff
    pci 0000:00:1c.2: MEM window: 0xfa000000-0xfbffffff
    pci 0000:00:1c.2: PREFETCH window: 0x000000f4000000-0x000000f5ffffff
    pci 0000:00:1c.4: PCI bridge, secondary bus 0000:08
    pci 0000:00:1c.4: IO window: 0x6000-0x6fff
    pci 0000:00:1c.4: MEM window: 0xfc000000-0xfc0fffff
    pci 0000:00:1c.4: PREFETCH window: disabled
    pci 0000:09:03.0: CardBus bridge, secondary bus 0000:0a
    pci 0000:09:03.0: IO window: 0x007000-0x0070ff
    pci 0000:09:03.0: IO window: 0x007400-0x0074ff
    pci 0000:09:03.0: PREFETCH window: 0x88000000-0x8bffffff
    pci 0000:09:03.0: MEM window: 0x90000000-0x93ffffff
    pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
    pci 0000:00:1e.0: IO window: 0x7000-0x7fff
    pci 0000:00:1e.0: MEM window: 0xfc100000-0xfc1fffff
    pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x0000008bffffff
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:09:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
    pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff]
    pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
    pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
    pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
    pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
    pci_bus 0000:04: resource 0 io: [0x4000-0x4fff]
    pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
    pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
    pci_bus 0000:06: resource 0 io: [0x5000-0x5fff]
    pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
    pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
    pci_bus 0000:08: resource 0 io: [0x6000-0x6fff]
    pci_bus 0000:08: resource 1 mem: [0xfc000000-0xfc0fffff]
    pci_bus 0000:09: resource 0 io: [0x7000-0x7fff]
    pci_bus 0000:09: resource 1 mem: [0xfc100000-0xfc1fffff]
    pci_bus 0000:09: resource 2 pref mem [0x88000000-0x8bffffff]
    pci_bus 0000:09: resource 3 io: [0x00-0xffff]
    pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
    pci_bus 0000:0a: resource 0 io: [0x7000-0x70ff]
    pci_bus 0000:0a: resource 1 io: [0x7400-0x74ff]
    pci_bus 0000:0a: resource 2 pref mem [0x88000000-0x8bffffff]
    pci_bus 0000:0a: resource 3 mem: [0x90000000-0x93ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 2743k freed
    Simple Boot Flag at 0x36 set to 0x1
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1249997463.944:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 4017
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
    pcieport-driver 0000:00:01.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:1c.0: setting latency timer to 64
    pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:1c.1: setting latency timer to 64
    pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:1c.2: setting latency timer to 64
    pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
    pcieport-driver 0000:00:1c.4: setting latency timer to 64
    vesafb: framebuffer at 0xcd000000, mapped to 0xffffc20010100000, using 8000k, total 14336k
    vesafb: mode is 1280x800x32, linelength=5120, pages=1
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 160x50
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.103
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 464k freed
    SCSI subsystem initialized
    libata version 3.00 loaded.
    pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    pata_acpi 0000:00:1f.1: setting latency timer to 64
    pata_acpi 0000:00:1f.1: PCI INT A disabled
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 29
    ata2: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404180 irq 29
    ata3: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404200 irq 29
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: ATA-7: FUJITSU MHV2200BT, 0000004F, max UDMA/100
    ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2200B 0000 PQ: 0 ANSI: 5
    ata_piix 0000:00:1f.1: version 2.13
    ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    ata_piix 0000:00:1f.1: setting latency timer to 64
    scsi3 : ata_piix
    scsi4 : ata_piix
    ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
    ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
    ata4.00: ATAPI: MATSHITABD-MLT UJ-220V, 1.00, max UDMA/33
    ata4.00: configured for UDMA/33
    scsi 3:0:0:0: CD-ROM MATSHITA BD-MLT UJ-220V 1.00 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
    Intel AES-NI instructions are not detected.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with writeback data mode.
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    udev: starting version 141
    sky2 driver version 1.22
    sky2 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    sky2 0000:08:00.0: setting latency timer to 64
    sky2 0000:08:00.0: Yukon-2 FE chip revision 1
    sky2 0000:08:00.0: irq 30 for MSI/MSI-X
    sky2 eth0: addr 00:13:a9:c1:09:33
    cfg80211: Calling CRDA to update world regulatory domain
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 3:0:0:0: Attached scsi generic sg1 type 5
    ACPI: AC Adapter [ADP1] (on-line)
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    ACPI: Power Button [PWRB]
    ACPI: SSDT 000000007fedb8e7 0027A (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: SSDT 000000007fedb3b8 004AA (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: SSDT 000000007fedbb61 000C8 (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI: SSDT 000000007fedb862 00085 (v01 Sony VAIO 20070418 PTL 20050624)
    ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI_CPU:01: registered as cooling_device1
    ACPI: Processor [CPU1] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [TZ00] (58 C)
    input: PC Speaker as /devices/platform/pcspkr/input/input4
    sony-laptop: Sony Notebook Control Driver v0.6.
    input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/SNY5001:00/input/input5
    input: Sony Vaio Jogdial as /devices/virtual/input/input6
    ACPI: Invalid active0 threshold
    iTCO_vendor_support: vendor-support=0
    thermal LNXTHERM:02: registered as thermal_zone1
    ACPI: Thermal Zone [TZ01] (58 C)
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ACPI: Battery Slot [BAT0] (battery present)
    i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
    input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
    usb 1-2: new high speed USB device using ehci_hcd and address 2
    usb 1-2: configuration #1 chosen from 1 choice
    usb 2-3: new high speed USB device using ehci_hcd and address 3
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005]
    yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI
    yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI
    yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64
    usb 2-3: configuration #1 chosen from 1 choice
    nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    nvidia 0000:01:00.0: setting latency timer to 64
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.31 Tue Jul 28 17:52:27 PDT 2009
    yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16
    yenta_cardbus 0000:09:03.0: Socket status: 30000006
    pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
    yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
    yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff
    yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
    iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
    iwl3945: Copyright(c) 2003-2009 Intel Corporation
    iwl3945 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    iwl3945 0000:06:00.0: setting latency timer to 64
    ohci1394 0000:09:03.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 3:0:0:0: Attached scsi CD-ROM sr0
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc102000-fc1027ff] Max Packet=[2048] IR/IT contexts=[4/8]
    tifm_7xx1 0000:09:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    hub 2-0:1.0: unable to enumerate USB device on port 5
    iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
    iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
    iwl3945 0000:06:00.0: irq 31 for MSI/MSI-X
    Initializing USB Mass Storage driver...
    scsi5 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning
    input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input9
    input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/input/input10
    usb 5-1: new low speed USB device using uhci_hcd and address 2
    usbcore: registered new interface driver hiddev
    Linux video capture interface: v2.00
    input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.1/input/input11
    generic-usb 0003:1058:1102.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-3/input1
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1837)
    uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
    uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
    uvcvideo: Failed to initialize the device (-5).
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    phy0: Selected rate control algorithm 'iwl-3945-rs'
    usb 5-1: configuration #1 chosen from 1 choice
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input12
    generic-usb 0003:046D:C518.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input13
    generic-usb 0003:046D:C518.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
    fuse init (API version 7.11)
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Successfully done.
    vboxdrv: Found 2 processor cores.
    VBoxDrv: dbg - g_abExecMemory=ffffffffa0f05760
    vboxdrv: fAsync=0 offMin=0x1ae offMax=0x125c
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000).
    VBoxNetFlt: dbg - g_abExecMemory=ffffffffa10a9f00
    hub 2-0:1.0: unable to enumerate USB device on port 5
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302564f69]
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    Clocksource tsc unstable (delta = -435934901 ns)
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    EXT3 FS on dm-0, internal journal
    scsi 5:0:0:0: Direct-Access WD My Book 1028 PQ: 0 ANSI: 4
    sd 5:0:0:0: Attached scsi generic sg2 type 0
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    sd 5:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
    sd 5:0:0:0: [sdb] Write Protect is off
    sd 5:0:0:0: [sdb] Mode Sense: 10 00 00 00
    sd 5:0:0:0: [sdb] Assuming drive cache: write through
    usb-storage: device scan complete
    sd 5:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 5:0:0:0: [sdb] Attached SCSI disk
    EXT4-fs: barriers enabled
    kjournald2 starting: pid 1929, dev dm-1:8, commit interval 5 seconds
    EXT4 FS on dm-1, internal journal on dm-1:8
    EXT4-fs: delayed allocation enabled
    EXT4-fs: file extents enabled
    EXT4-fs: mballoc enabled
    EXT4-fs: mounted filesystem dm-1 with ordered data mode
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    Adding 2449872k swap on /dev/sda6. Priority:-1 extents:1 across:2449872k
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode
    hub 2-0:1.0: unable to enumerate USB device on port 5
    iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
    Registered led device: iwl-phy0::radio
    Registered led device: iwl-phy0::assoc
    Registered led device: iwl-phy0::RX
    Registered led device: iwl-phy0::TX
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    wlan0: authenticate with AP 00:11:6b:10:2f:bc
    wlan0: authenticated
    wlan0: associate with AP 00:11:6b:10:2f:bc
    wlan0: RX AssocResp from 00:11:6b:10:2f:bc (capab=0x471 status=0 aid=1)
    wlan0: associated
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    hub 2-0:1.0: unable to enumerate USB device on port 5
    i think the result is, that my bluetooth and webcam isn't working...
    can you help me pls.
    regards nigg
    Last edited by nigg (2009-08-11 14:14:57)

    I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
    Last edited by esdrasbeleza (2009-09-02 01:16:09)

  • Problem with boot / new install system ond SSD

    Hi guys,
    I have fresh installed system on my new SSD. I use my old HDD as external usb drive.
    I have problem with boot when I dont have connected HDD to usb.
    My system boot only to console no to KDE. When I connect external HDD to usb and reboot system, system boot normally.
    Logs after boot.
    Feb 26 16:46:39 arch systemd[1]: Reached target Login Prompts.
    Feb 26 16:46:39 arch systemd[1]: Starting K Display Manager...
    Feb 26 16:46:39 arch systemd[1]: Started K Display Manager.
    Feb 26 16:46:39 arch systemd-logind[231]: New seat seat0.
    Feb 26 16:46:39 arch systemd[1]: Started Login Service.
    Feb 26 16:46:40 arch kernel: microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
    Feb 26 16:46:40 arch kernel: platform microcode: Direct firmware load failed with error -2
    Feb 26 16:46:40 arch kernel: platform microcode: Falling back to user helper
    Feb 26 16:46:40 arch kernel: random: nonblocking pool is initialized
    Feb 26 16:46:40 arch kernel: uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
    Feb 26 16:46:40 arch laptop-mode[271]: enabled, not active
    Feb 26 16:46:40 arch kernel: input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.0/input/input16
    Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver uvcvideo
    Feb 26 16:46:40 arch kernel: USB Video Class driver (1.1.1)
    Feb 26 16:46:40 arch systemd[1]: Started Wicd a wireless and wired network manager for Linux.
    Feb 26 16:46:40 arch systemd[1]: Starting Network.
    Feb 26 16:46:40 arch systemd[1]: Reached target Network.
    Feb 26 16:46:40 arch systemd[1]: Starting OpenSSH Daemon...
    Feb 26 16:46:40 arch systemd[1]: Started OpenSSH Daemon.
    Feb 26 16:46:40 arch systemd[1]: Starting NoMachine Server daemon...
    Feb 26 16:46:40 arch sshd[373]: Server listening on 0.0.0.0 port 22.
    Feb 26 16:46:40 arch sshd[373]: Server listening on :: port 22.
    Feb 26 16:46:40 arch mtp-probe[404]: checking bus 7, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2"
    Feb 26 16:46:40 arch mtp-probe[404]: bus: 7, device: 2 was not an MTP device
    Feb 26 16:46:40 arch kernel: hidraw: raw HID events driver (C) Jiri Kosina
    Feb 26 16:46:40 arch kernel: usbcore: registered new interface driver usbhid
    Feb 26 16:46:40 arch kernel: usbhid: USB HID core driver
    Feb 26 16:46:40 arch systemd[1]: Starting Sound Card.
    Feb 26 16:46:40 arch systemd[1]: Reached target Sound Card.
    Feb 26 16:46:40 arch systemd-udevd[145]: renamed network interface eth0 to enp3s0
    Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040101)
    Feb 26 16:46:40 arch kernel: psmouse serio4: elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
    Feb 26 16:46:40 arch kernel: i915 0000:00:02.0: irq 45 for MSI/MSI-X
    Feb 26 16:46:40 arch kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    Feb 26 16:46:40 arch kernel: [drm] Driver supports precise vblank timestamp query.
    Feb 26 16:46:40 arch kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    Feb 26 16:46:40 arch kernel: iTCO_vendor_support: vendor-support=0
    Feb 26 16:46:40 arch kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    Feb 26 16:46:40 arch kernel: iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
    Feb 26 16:46:40 arch kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Feb 26 16:46:40 arch kernel: input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
    Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event2 (Lid Switch)
    Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event1 (Sleep Button)
    Feb 26 16:46:40 arch systemd-logind[231]: Watching system buttons on /dev/input/event3 (Power Button)
    Feb 26 16:46:41 arch kernel: microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
    Feb 26 16:46:41 arch kernel: platform microcode: Direct firmware load failed with error -2
    Feb 26 16:46:41 arch kernel: platform microcode: Falling back to user helper
    Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input17
    Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0001: input,hidraw0: USB HID v1.11 Keyboard [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input0
    Feb 26 16:46:41 arch kernel: input: 2.4G Wireless Wireless Receiver as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18
    Feb 26 16:46:41 arch kernel: hid-generic 0003:1915:0F01.0002: input,hidraw1: USB HID v1.11 Mouse [2.4G Wireless Wireless Receiver ] on usb-0000:00:1d.1-2/input1
    Feb 26 16:46:41 arch kernel: BUG: unable to handle kernel NULL pointer dereference at (null)
    Feb 26 16:46:41 arch kernel: IP: [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
    Feb 26 16:46:41 arch kernel: PGD b650b067 PUD b650a067 PMD 0
    Feb 26 16:46:41 arch kernel: Oops: 0000 [#1] PREEMPT SMP
    Feb 26 16:46:41 arch kernel: Modules linked in: mousedev(+) hid_generic iTCO_wdt iTCO_vendor_support ath9k(+) usbhid ath9k_common hid ath9k_hw ath uvcvideo mac80211 microcode(+) videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media evdev psmouse serio_raw pcspkr cfg80211 lpc_ich i915(+) atl1e snd_hda_codec_via snd_hda_intel drm_kms_helper snd_hda_codec drm snd_hwdep snd_pcm snd_page_alloc i2c_algo_bit i2c_core snd_timer asus_laptop snd battery ac soundcore sparse_keymap acpi_cpufreq rfkill video input_polldev thermal intel_agp intel_gtt shpchp processor button ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod atkbd libps2 ahci libahci libata scsi_mod ehci_pci uhci_hcd ehci_hcd usbcore usb_common i8042 serio
    Feb 26 16:46:41 arch kernel: CPU: 1 PID: 227 Comm: acpid Not tainted 3.13.5-1-ARCH #1
    Feb 26 16:46:41 arch kernel: Hardware name: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 217 12/04/2009
    Feb 26 16:46:41 arch kernel: task: ffff88007ffeda00 ti: ffff8800b6516000 task.ti: ffff8800b6516000
    Feb 26 16:46:41 arch kernel: RIP: 0010:[<ffffffffa06c1317>] [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
    Feb 26 16:46:41 arch kernel: RSP: 0018:ffff8800b6517c10 EFLAGS: 00010202
    Feb 26 16:46:41 arch kernel: RAX: 0000000000000000 RBX: ffff8801390f5800 RCX: ffff8801390f5868
    Feb 26 16:46:41 arch kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
    Feb 26 16:46:41 arch kernel: RBP: ffff8800b6517c28 R08: 0000000000000000 R09: ffff88013b001600
    Feb 26 16:46:41 arch kernel: R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
    Feb 26 16:46:41 arch kernel: R13: ffff8801390f5880 R14: ffff8800b3287558 R15: ffff880138c8f600
    Feb 26 16:46:41 arch kernel: FS: 00007f8de7e14700(0000) GS:ffff88013fd00000(0000) knlGS:0000000000000000
    Feb 26 16:46:41 arch kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    Feb 26 16:46:41 arch kernel: CR2: 0000000000000000 CR3: 00000000b6507000 CR4: 00000000000407e0
    Feb 26 16:46:41 arch kernel: Stack:
    Feb 26 16:46:41 arch kernel: ffff88013926e400 ffff8801390f5800 ffff8801390f5878 ffff8800b6517c60
    Feb 26 16:46:41 arch kernel: ffffffffa06c20cc ffff8801390f5b48 ffff8800b3287558 ffff880138c8f600
    Feb 26 16:46:41 arch kernel: ffffffffa06c2e80 ffff880138c8f610 ffff8800b6517c98 ffffffff811a834f
    Feb 26 16:46:41 arch kernel: Call Trace:
    Feb 26 16:46:41 arch kernel: [<ffffffffa06c20cc>] mousedev_open+0xcc/0x150 [mousedev]
    Feb 26 16:46:41 arch kernel: [<ffffffff811a834f>] chrdev_open+0x9f/0x1d0
    Feb 26 16:46:41 arch kernel: [<ffffffff811a19e7>] do_dentry_open+0x1b7/0x2c0
    Feb 26 16:46:41 arch kernel: [<ffffffff811aedc1>] ? __inode_permission+0x41/0xb0
    Feb 26 16:46:41 arch kernel: [<ffffffff811a82b0>] ? cdev_put+0x30/0x30
    Feb 26 16:46:41 arch kernel: [<ffffffff811a1e01>] finish_open+0x31/0x40
    Feb 26 16:46:41 arch kernel: [<ffffffff811b1bf2>] do_last+0x572/0xe90
    Feb 26 16:46:41 arch kernel: [<ffffffff811af0b6>] ? link_path_walk+0x236/0x8d0
    Feb 26 16:46:41 arch kernel: [<ffffffff811b25cb>] path_openat+0xbb/0x6b0
    Feb 26 16:46:41 arch kernel: [<ffffffff811b3cda>] do_filp_open+0x3a/0x90
    Feb 26 16:46:41 arch kernel: [<ffffffff811c05c7>] ? __alloc_fd+0xa7/0x130
    Feb 26 16:46:41 arch kernel: [<ffffffff811a2fd4>] do_sys_open+0x124/0x220
    Feb 26 16:46:41 arch kernel: [<ffffffff811a30ee>] SyS_open+0x1e/0x20
    Feb 26 16:46:41 arch kernel: [<ffffffff8152142d>] system_call_fastpath+0x1a/0x1f
    Feb 26 16:46:41 arch kernel: Code: c0 6e e5 e0 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 a2 6e e5 e0 eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
    Feb 26 16:46:41 arch kernel: RIP [<ffffffffa06c1317>] mousedev_open_device+0x77/0x100 [mousedev]
    Feb 26 16:46:41 arch kernel: RSP <ffff8800b6517c10>
    Feb 26 16:46:41 arch kernel: CR2: 0000000000000000
    Feb 26 16:46:41 arch kernel: ---[ end trace 76aa0cbb67cf77f6 ]---
    Feb 26 16:46:41 arch kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Feb 26 16:46:41 arch systemd[1]: acpid.service: main process exited, code=killed, status=9/KILL
    Feb 26 16:46:41 arch systemd[1]: Unit acpid.service entered failed state.
    Feb 26 16:46:41 arch kernel: [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
    Feb 26 16:46:41 arch systemd[1]: Started Laptop Mode Tools.
    Feb 26 16:46:41 arch nxserver[374]: NX> 161 Enabled service: nxserver.
    Feb 26 16:46:42 arch kernel: fbcon: inteldrmfb (fb0) is primary device
    Feb 26 16:46:42 arch kernel: ath: phy0: Enable LNA combining
    Feb 26 16:46:42 arch kernel: ath: EEPROM regdomain: 0x60
    Feb 26 16:46:42 arch kernel: ath: EEPROM indicates we should expect a direct regpair map
    Feb 26 16:46:42 arch kernel: ath: Country alpha2 being used: 00
    Feb 26 16:46:42 arch kernel: ath: Regpair used: 0x60
    Feb 26 16:46:42 arch kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    Feb 26 16:46:42 arch kernel: ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011e80000, irq=17
    Feb 26 16:46:42 arch systemd-udevd[139]: renamed network interface wlan0 to wlp2s0
    Feb 26 16:46:42 arch kernel: Console: switching to colour frame buffer device 170x48
    Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    Feb 26 16:46:42 arch kernel: i915 0000:00:02.0: registered panic notifier
    Feb 26 16:46:42 arch kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    Feb 26 16:46:42 arch kernel: acpi device:38: registered as cooling_device2
    Feb 26 16:46:42 arch kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input19
    Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxnode.
    Feb 26 16:46:42 arch nxserver[374]: NX> 161 Enabled service: nxd.
    Feb 26 16:46:42 arch systemd[1]: Started NoMachine Server daemon.
    Feb 26 16:46:42 arch systemd[1]: Starting Multi-User System.
    Feb 26 16:46:42 arch systemd[1]: Reached target Multi-User System.
    Feb 26 16:46:42 arch systemd[1]: Starting Graphical Interface.
    Feb 26 16:46:42 arch systemd[1]: Reached target Graphical Interface.
    Feb 26 16:46:42 arch systemd[1]: Startup finished in 1.241s (kernel) + 3.231s (userspace) = 4.473s.
    Feb 26 16:46:46 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    Feb 26 16:46:48 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
    Feb 26 16:46:49 arch wicd[226]: dhcpcd[1383]: dhcpcd not running
    Feb 26 16:46:49 arch dhcpcd[1383]: dhcpcd not running
    Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
    Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
    Feb 26 16:46:49 arch wicd[226]: dhcpcd[1389]: dhcpcd not running
    Feb 26 16:46:49 arch dhcpcd[1389]: dhcpcd not running
    Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: enp3s0 error: No such file or directory
    Feb 26 16:46:49 arch wicd[226]: dhcpcd[1397]: dhcpcd not running
    Feb 26 16:46:49 arch dhcpcd[1397]: dhcpcd not running
    Feb 26 16:46:49 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
    Feb 26 16:46:49 arch wicd[226]: Failed to connect to non-global ctrl_ifname: wlp2s0 error: No such file or directory
    Feb 26 16:46:51 arch systemd[1]: Starting Getty on tty2...
    Feb 26 16:46:51 arch systemd[1]: Started Getty on tty2.
    Feb 26 16:46:52 arch kernel: wlp2s0: authenticate with 08:86:3b:7f:86:08
    Feb 26 16:46:52 arch kernel: wlp2s0: send auth to 08:86:3b:7f:86:08 (try 1/3)
    Feb 26 16:46:52 arch kernel: wlp2s0: authenticated
    Feb 26 16:46:52 arch kernel: ath9k 0000:02:00.0 wlp2s0: disabling HT/VHT due to WEP/TKIP use
    Feb 26 16:46:52 arch kernel: wlp2s0: associate with 08:86:3b:7f:86:08 (try 1/3)
    Feb 26 16:46:52 arch kernel: wlp2s0: RX AssocResp from 08:86:3b:7f:86:08 (capab=0x411 status=0 aid=4)
    Feb 26 16:46:52 arch kernel: wlp2s0: associated
    Feb 26 16:46:52 arch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
    Feb 26 16:46:53 arch dhcpcd[1416]: version 6.2.1 starting
    Feb 26 16:46:54 arch dhcpcd[1416]: DUID 00:01:00:01:1a:96:a5:70:1c:4b:d6:a2:1f:ad
    Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: IAID d6:a2:1f:ad
    Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: soliciting an IPv6 router
    Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: ipv6nd_sendrsprobe: sendmsg: Cannot assign requested address
    Feb 26 16:46:54 arch dhcpcd[1416]: wlp2s0: rebinding lease of 192.168.2.3
    Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.096:2): pid=1406 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
    Feb 26 16:46:55 arch login[1406]: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
    Feb 26 16:46:55 arch systemd[1]: Starting user-0.slice.
    Feb 26 16:46:55 arch systemd[1]: Created slice user-0.slice.
    Feb 26 16:46:55 arch systemd[1]: Starting User Manager for 0...
    Feb 26 16:46:55 arch kernel: type=1006 audit(1393429615.106:3): pid=1477 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
    Feb 26 16:46:55 arch systemd[1]: Starting Session 1 of user root.
    Feb 26 16:46:55 arch systemd[1]: Started Session 1 of user root.
    Feb 26 16:46:55 arch systemd-logind[231]: New session 1 of user root.
    Feb 26 16:46:55 arch systemd[1477]: pam_unix(systemd-user:session): session opened for user root by (uid=0)
    Feb 26 16:46:55 arch login[1406]: ROOT LOGIN ON tty2
    Feb 26 16:46:55 arch systemd[1477]: Failed to open private bus connection: Failed to connect to socket /run/user/0/dbus/user_bus_socket: No such file or directory
    Feb 26 16:46:55 arch systemd[1477]: Mounted /sys/kernel/config.
    Feb 26 16:46:55 arch systemd[1477]: Stopped target Sound Card.
    Feb 26 16:46:55 arch systemd[1477]: Starting Default.
    Feb 26 16:46:55 arch systemd[1477]: Reached target Default.
    Feb 26 16:46:55 arch systemd[1477]: Startup finished in 7ms.
    Feb 26 16:46:55 arch systemd[1]: Started User Manager for 0.
    Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: leased 192.168.2.3 for 283824000 seconds
    Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding route to 192.168.2.0/24
    Feb 26 16:46:59 arch dhcpcd[1416]: wlp2s0: adding default route via 192.168.2.1
    Feb 26 16:46:59 arch dhcpcd[1416]: forked to background, child pid 1522
    Feb 26 16:47:10 arch kdm[238]: X server startup timeout, terminating
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] /devices/pci0000:00/0000:00:02.0 timeout; kill it
    Feb 26 16:47:12 arch systemd-udevd[131]: seq 1255 '/devices/pci0000:00/0000:00:02.0' killed
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] /devices/platform/i8042/serio4/input/input15 timeout; kill it
    Feb 26 16:47:12 arch systemd-udevd[131]: seq 1659 '/devices/platform/i8042/serio4/input/input15' killed
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18 timeout; kill it
    Feb 26 16:47:12 arch systemd-udevd[131]: seq 1679 '/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input18' killed
    Feb 26 16:47:12 arch kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [140] terminated by signal 9 (Killed)
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [148] terminated by signal 9 (Killed)
    Feb 26 16:47:12 arch systemd[1]: Starting Load/Save Screen Backlight Brightness of acpi_video0...
    Feb 26 16:47:12 arch systemd[1]: Started Load/Save Screen Backlight Brightness of acpi_video0.
    Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input15, error: -4
    Feb 26 16:47:12 arch systemd-udevd[131]: worker [146] terminated by signal 9 (Killed)
    Feb 26 16:47:12 arch kernel: input: failed to attach handler mousedev to device input18, error: -4
    Feb 26 16:47:12 arch kernel: mousedev: PS/2 mouse device common for all mice
    Feb 26 16:47:13 arch kdm[238]: X server for display :0 cannot be started, session disabled
    Feb 26 16:48:56 arch kernel: usb 7-2: USB disconnect, device number 2
    Feb 26 16:48:56 arch laptop-mode[1782]: Laptop mode
    Feb 26 16:48:56 arch laptop-mode[1783]: enabled, not active
    Feb 26 16:48:56 arch laptop-mode[1834]: Laptop mode
    [xx@arch Desktop]$ uname -a
    Linux arch 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:25:24 CET 2014 x86_64 GNU/Linux
    Could you please someone help me with this?
    Thanks

    Sorry to bump this, but I'm having the exact same error tonight on my HTPC, any chance you found out what the problem was ?
    To make matters worse, it's not happening every single time, but maybe every 4 out of 5 boots (same kernel, no changes in between.)
    I thought this was a kernel issue related to this:
    https://lkml.org/lkml/2014/3/10/359
    I've tried adding atkbd and psmouse to my mkinitcpio.conf MODULES section and rebuilt, but no change.
    I changed the NVidia driver from nvidia-304xx to nvidia-full-beta-all ( 334.21 ) from AUR but it had the same error at the same place.
    Here's the part from `dmesg` where it borks:
    [ 3.229195] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
    [ 3.236312] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
    [ 3.237230] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
    [ 3.279150] BUG: unable to handle kernel NULL pointer dereference at (null)
    [ 3.280083] IP: [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
    [ 3.280810] PGD c99ea067 PUD c9f4a067 PMD 0
    [ 3.281266] Oops: 0000 [#1] PREEMPT SMP
    [ 3.281668] Modules linked in: mousedev(+) nvidia(PO+) snd_hda_codec_realtek hid_logitech_dj usbhid hid usb_storage coretemp evdev microcode pcspkr serio_raw snd_hda_intel(+) snd_hda_codec shpchp snd_hwdep snd_pcm snd_page_alloc snd_timer snd soundcore i2c_nforce2 i2c_core wmi processor button r8169 mii ext4 crc16 mbcache jbd2 sd_mod ata_generic pata_acpi ahci libahci libata ohci_pci ohci_hcd ehci_pci ehci_hcd scsi_mod usbcore usb_common psmouse atkbd libps2 i8042 serio
    [ 3.281820] CPU: 1 PID: 211 Comm: acpid Tainted: P O 3.13.6-1-ARCH #1
    [ 3.281820] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./MCP7A-ION, BIOS 080015 10/10/2009
    [ 3.281820] task: ffff8800ca5c1b00 ti: ffff8800c97f0000 task.ti: ffff8800c97f0000
    [ 3.281820] RIP: 0010:[<ffffffffa1cbc317>] [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
    [ 3.281820] RSP: 0018:ffff8800c97f1c10 EFLAGS: 00010202
    [ 3.281820] RAX: 0000000000000000 RBX: ffff8800c9987000 RCX: ffff8800c9987068
    [ 3.281820] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
    [ 3.281820] RBP: ffff8800c97f1c28 R08: 0000000000000000 R09: ffff8800cf401600
    [ 3.281820] R10: 0000000000000000 R11: 0000000000000004 R12: 0000000000000000
    [ 3.281820] R13: ffff8800c9987080 R14: ffff8800c0260058 R15: ffff8800c9f2a500
    [ 3.281820] FS: 00007f8f12f05700(0000) GS:ffff8800cfa80000(0000) knlGS:0000000000000000
    [ 3.281820] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    [ 3.281820] CR2: 0000000000000000 CR3: 00000000ca93e000 CR4: 00000000000007e0
    [ 3.281820] Stack:
    [ 3.281820] ffff8800c9940000 ffff8800c9987000 ffff8800c9987078 ffff8800c97f1c60
    [ 3.281820] ffffffffa1cbd0cc ffff8800c9987348 ffff8800c0260058 ffff8800c9f2a500
    [ 3.281820] ffffffffa1cbde80 ffff8800c9f2a510 ffff8800c97f1c98 ffffffff811a83ef
    [ 3.392372] Call Trace:
    [ 3.398245] [<ffffffffa1cbd0cc>] mousedev_open+0xcc/0x150 [mousedev]
    [ 3.398245] [<ffffffff811a83ef>] chrdev_open+0x9f/0x1d0
    [ 3.398245] [<ffffffff811a1a87>] do_dentry_open+0x1b7/0x2c0
    [ 3.398245] [<ffffffff811aee61>] ? __inode_permission+0x41/0xb0
    [ 3.398245] [<ffffffff811a8350>] ? cdev_put+0x30/0x30
    [ 3.398245] [<ffffffff811a1ea1>] finish_open+0x31/0x40
    [ 3.398245] [<ffffffff811b1c92>] do_last+0x572/0xe90
    [ 3.398245] [<ffffffff811af156>] ? link_path_walk+0x236/0x8d0
    [ 3.398245] [<ffffffff811b266b>] path_openat+0xbb/0x6b0
    [ 3.508083] random: nonblocking pool is initialized
    [ 3.398245] [<ffffffff811b3d7a>] do_filp_open+0x3a/0x90
    [ 3.398245] [<ffffffff811c0617>] ? __alloc_fd+0xa7/0x130
    [ 3.398245] [<ffffffff811a3074>] do_sys_open+0x124/0x220
    [ 3.398245] [<ffffffff811a318e>] SyS_open+0x1e/0x20
    [ 3.398245] [<ffffffff815216ad>] system_call_fastpath+0x1a/0x1f
    [ 3.556729] Code: 40 c1 85 df 5b 44 89 e0 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 4c 89 ef 41 bc ed ff ff ff e8 22 c1 85 df eb e0 48 8b 15 c9 21 00 00 <8b> 02 8d 48 01 85 c0 89 0a 75 c6 48 8b 05 37 1f 00 00 48 3d 60
    [ 3.556729] RIP [<ffffffffa1cbc317>] mousedev_open_device+0x77/0x100 [mousedev]
    [ 3.556729] RSP <ffff8800c97f1c10>
    [ 3.556729] CR2: 0000000000000000
    [ 3.563412] ---[ end trace 590b482a8704c6ac ]---
    [ 3.980300] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
    Here's the output on a good boot:
    [ 3.415791] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-3/input2
    [ 3.422256] input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input6
    [ 3.422644] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:04.0-3:1
    [ 3.434861] mousedev: PS/2 mouse device common for all mice
    [ 3.853639] input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
    Here's my mkinitcpio.conf
    : grep -v ^\# /etc/mkinitcpio.conf
    MODULES="atkbd psmouse"
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
    Last edited by corpdecker (2014-03-19 02:47:30)

  • Problem with agent10g upload

    Hi Gurus,
    I have installed Agent10g on a linux box the installation was successful and ran the root.sh, I am able to start agent successfully using emctl start agent but I could not see the host in target list of OMS. You can see the agent status below and please find the traces of emctl.trc and emagent.trc.
    And the when installaing some of the things are failed, the command failed configuration was "oracle.sysman.emcp.agent.AgentPlugIn" I found this in /u01/app/oracle/OracleHomes/agent10g/cfgtoollogs/configToolFailedCommands
    Please let me know the reason for my prblem and solution
    thanks in advance
    Ashok Chava.
    IAS904 % ./emctl status agent
    Oracle Enterprise Manager 10g Release 10.2.0.2.0.
    Copyright (c) 1996, 2006 xyz Corporation. All rights reserved.
    Agent Version : 10.2.0.2.0
    OMS Version : 10.2.0.2.0
    Protocol Version : 10.2.0.2.0
    Agent Home : /u01/app/oracle/OracleHomes/agent10g
    Agent binaries : /u01/app/oracle/OracleHomes/agent10g
    Agent Process ID : 22286
    Parent Process ID : 22269
    Agent URL : http://web287.us.xyz.com:1920/emd/main/
    Repository URL : http://ajacob-idc.idc.xyz.com:4889/em/upload/
    Started at : 2006-09-08 09:42:10
    Started by user : xyz
    Last Reload : 2006-09-08 09:42:10
    Last successful upload : (none)
    Last attempted upload : (none)
    Total Megabytes of XML files uploaded so far : 0.00
    Number of XML files pending upload : 1113
    Size of XML files pending upload(MB) : 19.25
    Available disk space on upload filesystem : 36.01%
    Last attempted heartbeat to OMS : 2006-09-08 20:23:40
    Last successful heartbeat to OMS : unknown
    Agent is Running and Ready
    emdctl.trc
    2006-09-08 09:42:10 Thread-3058628224 WARN http: snmehl_connect: connect failed to (web287.us.xyz.com:1920): Connection refused (error = 111)
    2006-09-08 09:42:10 Thread-3058628224 ERROR main: nmectla_agentctl: Error connecting to http://web287.us.xyz.com:1920/emd/main/. Returning status code 1
    emagent.trc
    2006-09-08 20:28:07 Thread-2811276208 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
    2006-09-08 20:28:08 Thread-3035749296 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
    2006-09-08 20:28:09 Thread-3035749296 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
    2006-09-08 20:28:11 Thread-3035749296 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
    2006-09-08 20:28:11 Thread-3046562736 ERROR command: nmejcn: received no status header from repository at http://ajacob-idc.idc.xyz.com:4889/em/upload/
    2006-09-08 20:28:20 Thread-3034819504 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
    2006-09-08 20:28:26 Thread-3035749296 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
    2006-09-08 20:28:27 Thread-3031669680 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
    2006-09-08 20:28:29 Thread-3031669680 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
    2006-09-08 20:28:30 Thread-2807225264 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.

    Hi Sujit and Nazim,
    thanks for your response.The repositary URL is working fine becasue I have used downloadAgent.linux script to install the agent10g on this linux box. I have used "oracle" user to install the agent and I am using oracle user to start the agent. So there is no question of acces problems as I know.
    when tried to telnet from the linux box where I installed agent10g it is connecting I have used below comamnd
    telnet ajcob.xyz.com 4889 the below given is the message
    Trying 152.69.149.127...
    Connected to ajacob.xyz.com.
    Escape character is '^]'.
    Nazim you asked for the emoms.trc file I looked into the trc file but I could not find anything related to the this agent upload problems other agents which are running on winows box are connected to OMS and uploading files as expected so I assume there is no problem with OMS. If you insist on seeing emoms.trc I can very well provide them.
    Please let me know the solution for my problem.
    Thanks,
    Ashok Chava

  • Metalink SR category for problem with CRS install

    HI
    Can You please tell me , where I find in SR category to create request on metaling about problem with install/start crs :
    I wont to create RAC env where host is ORACLE VM and clusterware is OCFS2 and wit Oracle Enterprise linux 5 , but after istal ai have problem with start crs (root.sh) and I don't know to find relevant category
    [root@lin1 bin]# ./crsctl start cluster
    CRS-2672: Attempting to start 'ora.gipcd' on 'lin1'
    CRS-2672: Attempting to start 'ora.mdnsd' on 'lin1'
    CRS-2676: Start of 'ora.mdnsd' on 'lin1' succeeded
    CRS-2676: Start of 'ora.gipcd' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'lin1'
    CRS-2676: Start of 'ora.gpnpd' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
    CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
    CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
    CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
    CRS-2674: Start of 'ora.cssd' on 'lin1' failed
    CRS-679: Attempting to clean 'ora.cssd' on 'lin1'
    CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
    CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
    CRS-2674: Start of 'ora.cssd' on 'lin1' failed
    CRS-2679: Attempting to clean 'ora.cssd' on 'lin1'
    CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
    CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
    CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'lin1'
    CRS-2677: Stop of 'ora.cssdmonitor' on 'lin1' succeeded
    CRS-4000: Command Start failed, or completed with errors.
    [root@lin1 bin]# ./crsctl check cluster
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
    CRS-4534: Cannot communicate with Event Manager
    [root@lin1 bin]# ./crsctl check cluster -all
    lin1:
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
    CRS-4534: Cannot communicate with Event Manager
    Thank You Brano

    HI
    Can You please tell me , where I find in SR category to create request on metaling about problem with install/start crs :
    I wont to create RAC env where host is ORACLE VM and clusterware is OCFS2 and wit Oracle Enterprise linux 5 , but after istal ai have problem with start crs (root.sh) and I don't know to find relevant category
    [root@lin1 bin]# ./crsctl start cluster
    CRS-2672: Attempting to start 'ora.gipcd' on 'lin1'
    CRS-2672: Attempting to start 'ora.mdnsd' on 'lin1'
    CRS-2676: Start of 'ora.mdnsd' on 'lin1' succeeded
    CRS-2676: Start of 'ora.gipcd' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'lin1'
    CRS-2676: Start of 'ora.gpnpd' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
    CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
    CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
    CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
    CRS-2674: Start of 'ora.cssd' on 'lin1' failed
    CRS-679: Attempting to clean 'ora.cssd' on 'lin1'
    CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
    CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
    CRS-2674: Start of 'ora.cssd' on 'lin1' failed
    CRS-2679: Attempting to clean 'ora.cssd' on 'lin1'
    CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
    CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
    CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
    CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'lin1'
    CRS-2677: Stop of 'ora.cssdmonitor' on 'lin1' succeeded
    CRS-4000: Command Start failed, or completed with errors.
    [root@lin1 bin]# ./crsctl check cluster
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
    CRS-4534: Cannot communicate with Event Manager
    [root@lin1 bin]# ./crsctl check cluster -all
    lin1:
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
    CRS-4534: Cannot communicate with Event Manager
    Thank You Brano

  • Problem with config sync between two CSM-S modules

    Hi everybody,
    I have a problem with config sync between two CSM-S modules.
    I am using CSM-S software version 2.1(8).
    The acitve module is used in a 6509 with WS-SUP720-BASE supervisor running software version 12.2(18)SXF12a.
    The standby module is used in a 6509-V with VS-S720-10G supervisor (no VSS setup) running software version 12.2(33)SXI3.
    Failover seems to work fine:
    switch-active#sh modu csm 2 ft                                      
    FT group 1, vlan 398
    This box is active
    Configuration is out-of-sync
    priority 150, heartbeat 3, failover 40, preemption is on
    switch-standby# sh modu csm 2 ft
    FT group 1, vlan 398
    This box is in standby state
    Configuration is out-of-sync
    priority 80, heartbeat 3, failover 40, preemption is on
    The command (on active side) "hw-module contentSwitchingModule 2 standby config-sync" leads to following result:
    switch-active:
    2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56042: Apr 14 16:21:44.223: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Bulk sync started
    2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56043: Apr 14 16:21:44.251: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configurations to Standby CSM, this may take several minutes!
    2010-04-14T16:21:46+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56044: Apr 14 16:21:45.995: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
    2010-04-14T16:21:51+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56045: Apr 14 16:21:50.831: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
    2010-04-14T16:21:57+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56046: Apr 14 16:21:56.151: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
    2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56047: Apr 14 16:22:58.791: %CSM_SLB-3-REDUNDANCY: Module 2 FT error: Active: Manual bulk sync timed out
    2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56048: Apr 14 16:22:58.803: %CSM_SLB-3-REDUNDANCY: Module 2 FT error:
    2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56049:  FT CONFIG SYNC: Failed config sync entity send
    switch-standby:
    2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2475: Apr 14 16:21:44.232: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Bulk sync started
    2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2476:
    2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2477: Apr 14 16:21:44.240: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: STANDBY:Configuration is being received, This may take several minutes!
    2010-04-14T16:21:49+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2478: Apr 14 16:21:48.824: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
    2010-04-14T16:21:54+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2479: Apr 14 16:21:53.964: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
    2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2480: Apr 14 16:21:58.852: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Started clearing configuration
    2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2481: Apr 14 16:21:59.400: %CSM_SLB-4-REDUNDANCY_WARN: Module 2 FT warning: Standby: Config Sync does not save running-config to startup-config
    2010-04-14T16:22:00+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2482: Apr 14 16:21:59.400: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Previous configuration are being deleted from supervisor
    The last log message on standby device seems to be correct - there is no CSM configuration after the attempted config sync.
    Our configuration includes about 3500 lines and it is really uncomfortable to keep in sync manually.
    Maybe someone has the same problem?
    kind regards,
    Christoph

    Hi Christoph,
    I am running into the exact same issue. Upon further investigation I've discovered that this is a known bug, CSCtd09117.  You can read more about it here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd09117 .   Apparently this is fixed in ver 12.2(32.8.11)SX323 .
    I haven't had a chance to upgrade yet, so I can't verify the fix, but if it works for you please let me know.
    Regards,
    Brandon

  • Problems with credentials

    Hi,
    I've got a problem with validating credentials on Grid Control for a server. Even I put the good local security policy, I have invalid credentials. My Grid control 10.2 server is on Red Hat and it's not part of the AD Domain. The target server is on the AD domain.....Do you think it could be a problem ?
    Thanks a lot for your help.
    David

    C:\Documents and Settings\admkvs>emctl status agent
    Oracle Enterprise Manager 10g Release 10.2.0.1.0.
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    Agent Version : 10.2.0.1.0
    OMS Version : 10.2.0.1.0
    Protocol Version : 10.2.0.0.0
    Agent Home : E:\OracleHomes\agent10g
    Agent binaries : E:\OracleHomes\agent10g
    Agent Process ID : 5376
    Agent URL : http://frcdgsqld2.eur.galderma.com:3872/emd/main/
    Repository URL : http://frcdgoragd:4889/em/upload/
    Started at : 2006-08-21 11:59:17
    Started by user : SYSTEM
    Last Reload : 2006-08-21 11:59:17
    Last successful upload : 2006-09-01 14:16:21
    Total Megabytes of XML files uploaded so far : 30.00
    Number of XML files pending upload : 0
    Size of XML files pending upload(MB) : 0.00
    Available disk space on upload filesystem : 85.09%
    Last successful heartbeat to OMS : 2006-09-01 14:16:00
    Agent is Running and Ready
    2006-08-21 11:59:17 Thread-5380 Starting Agent 10.2.0.1.0 from E:\OracleHomes\agent10g (00701)
    2006-08-21 11:59:18 Thread-5380 [E-Mail IMAP Server] InstanceProperty (imap_host) is marked OPTIONAL but is being used (00506)
    2006-08-21 11:59:19 Thread-5380 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
    2006-08-21 11:59:21 Thread-5380 [E-Mail POP Server] InstanceProperty (pop_host) is marked OPTIONAL but is being used (00506)
    2006-08-21 11:59:21 Thread-5380 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
    2006-08-21 11:59:21 Thread-5380 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
    2006-08-21 11:59:22 Thread-5380 [E-Mail SMTP Inbound Server] InstanceProperty (smtp_host) is marked OPTIONAL but is being used (00506)
    2006-08-21 11:59:22 Thread-5380 [E-Mail SMTP Outbound Server] InstanceProperty (smtp_host) is marked OPTIONAL but is being used (00506)
    2006-08-21 11:59:30 Thread-5380 EMAgent started successfully (00702)

  • Daily Problems with Mail Synchronizing with Exchange Server

    Our office uses Comcast Business Class Service, which uses 2007 Exchange Servers, for internet access and email. I upgraded my MacPro from 10.5.8 to Snow Leopard 10.6.2, using the Upgrade DVD. The upgrade process kept my original Leopard Mail settings, which were using POP. At that time, I had not problems with email.
    Unfortunately, awhile ago my Mail Preferences became corrupt, and I had to delete them. Upon relaunching Mail, the application wanted to use the new Autosync method to connect to the Comcast Exchange Server. Using POP was not an option.
    I must say that I am less than impressed with the way Mail integrates with Exchange Servers. I have daily problems, and experience these problems multiple times per day. When they happen, they slow my email communication down to a crawl; sometimes for as much as an hour.
    Specifically, the problem appears to be with Mail's ability (or inability) to properly synchronize with Exchange Servers. I get he spinning pizza icons next to the two Exchange email accounts I have in my Mailboxes source column. Opening the Activity window shows that the synchronizing process has slowed everything down. This results in not being able to send or receive email until the synchronizing is complete. And as I said, that can sometimes take as long as an hour.
    Stopping the process in the Activity window does not resolve the issue. Nor does quitting and relaunching Mail. Because the next time Mail attempts to connect to the Exchange Server, it will try to synchronize yet again. The problem has become so chronic, that I often have to resort to using Webmail while waiting of the synchronizing process to complete.
    Incidentally, the mailboxes that are synchronizing are empty! I am meticulous about keeping my Inbox, Sent, Drafts, and Trash mailboxes empty at all times. I do not use To-Do's, Notes, or Calendars of any kind on the Exchange Server, so there is no data to even sync!
    Has anyone else experienced this problem and found a fix? Other email accounts I have, which use POP or IMAP, do not have this issue. There does not appear to be away to abandon the Autosync Mail setup and revert back to POP. If there is, I will do it in a heartbeat.
    Thanks.

    Found a solution that works for me. Delete the problem account that's using AutoDiscover to sync with the exchange server. Before doing that, however, you will want to clear out the Inbox, Sent and even Trash folder for that account, as deleting it will remove the messages that currently reside in those folders. Just simply move them to another folder. You can move them back after re-creating the account.
    The second step is to re-create the account. Do this as you would normally, and enter in your name, username and password. THE TRICK: Press and hold the Option key when you click Continue. After Mail connects to the server and verifies your account information, you will then have a pull down menu that will allow you to choose Exchange Server, IMAP and POP. Simply select POP or IMAP, then fill out the rest of the fields.
    Viola! No more problematic Exchange Server syncing issues.

  • Yosemite Mail still has sync problems with Gmail - any solutions?

    I notice that Yosemite Mail still has sync problems with Gmail. After running for some hours, I noticed there were 6 emails in my Gmail account that had not synced over the past hour.
    In the meanwhile, for safety's sake (don't want to miss emails!) I'm back to Mailplane. But I wonder if anybody knows of a solution to this long term problem first introduced in Mavericks. Works fine in iOS Mail though.
    Thanks,
    doug

    I don't think we'll ever have a "best of both worlds" Doug. I've used Gmail since the week it launched the first beta in 2004, and it's always been a bit of a love-hate relationship for me (mostly love). With the demise of the Google Notifier for Mac, I went with Mailplane, but even it has problems. Like when I see my iPhone update with new mail and I'm looking at Mailplane and it won't update at times with even a forced refresh. I often have to close/reopen it to see new messages. But, it's hard to live without my Google Calendar only a tab click away, one of the primary reasons I use Mailplane, that plus changing view zoom sticks with Mailplane and won't with Gmail.
    For years I've thought Gmail labels were the perfect filing solution, but over the past few weeks I've been analyzing just how much I really use that feature, and for me...it's not all that much. I think I could simplify my life by putting everything into appropriate folders (as in all other email apps). Apple doesn't realize just how much money they're losing by not allowing people to use private domains with iCloud mail...which I would do in a heartbeat just because it would work perfectly with Mail.app. I would pay even more than I currently pay Google for this solution with Google Apps Business. So, I'm actually on the verge of moving my private domain to the best email service I can find and then using it with Mail.app. The problem here, of course, is I'll lose the best spam control on the planet (Gmail). So, as you say, there simply is not a "best" solution for all these things. I'll at least try a new email service first with some other domain to see how I like it before moving my primary email.
    Lastly, the other thing that incenses me is synching of flags between iOS and Apple Mail. It works fine between Gmail and iOS Mail, since all I care about is whether a message is starred/flagged or not.  But using Apple Mail, when I flag a message it will not show as flagged in their own iOS Mail, which is incomprehensible, given they built both apps.
    If you find a great solution or discover anything new...please post it here, Doug. Thanks.

  • A problem with threads

    I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
    Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
    My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
    Thank you in advance,
    Lefty

    This was one solution from the socket programming forum, have you tried this??
    public Thread MyThread extends Thread{
         boolean active = true;          
         public void run(){
              ss.setSoTimeout(90);               
              while (active){                   
                   try{                       
                        serverSocket = ss.accept();
                   catch (SocketTimeoutException ste){
                   // do nothing                   
         // interrupt thread           
         public void deactivate(){               
              active = false;
              // you gotta sleep for a time longer than the               
              // accept() timeout to make sure that timeout is finished.               
              try{
                   sleep(91);               
              }catch (InterruptedException ie){            
              interrupt();
    }

Maybe you are looking for

  • NLS in a Web archtecture

    I'm building a Web application that will have to support the Western European character set to accomodate French, Italian, Spanish, and German. How/where do I set the client NLS vars to display the proper locale settings? Clients from all countries w

  • 10.8.3 display resolution problem

    Heya. My monitor resolution has been working fine on my mid 2010 MacMini without any problems since 2010. Since the 10.8.3 update my screen resolution keeps resetting itself to 800 x 600 after waking from sleep. When I go to the Displays system pref

  • ASM lib for Oracle 11g on Red hat linux 4

    Hi, I am not able to find the ASMlib RPMs for Linux 4. Please let me know from where i can get the ASMlib RPMs for Linux 4 Do let me know if you need any additional information. linux 4 kernel version "2.6.9-22.EL i686" Thanks, Abhay.

  • Media consolidation - HELP!

    I'm about to start work on a huge project - a documentary that has been digitized (200 tapes worth) into 7 external drives of varying sizes. Since I'm taking the project to Argentina to work on it there, I would like to avoid taking all those drives

  • Problem to create Apple ID

    I create my apple ID, but when I try to purchase an application its tell me to review and after that in billing information show me message "For assistance contact itunes support at www.apple.com/support/itunes/ww."