Problem with config sync between two CSM-S modules

Hi everybody,
I have a problem with config sync between two CSM-S modules.
I am using CSM-S software version 2.1(8).
The acitve module is used in a 6509 with WS-SUP720-BASE supervisor running software version 12.2(18)SXF12a.
The standby module is used in a 6509-V with VS-S720-10G supervisor (no VSS setup) running software version 12.2(33)SXI3.
Failover seems to work fine:
switch-active#sh modu csm 2 ft
FT group 1, vlan 398
This box is active
Configuration is out-of-sync
priority 150, heartbeat 3, failover 40, preemption is on
switch-standby# sh modu csm 2 ft
FT group 1, vlan 398
This box is in standby state
Configuration is out-of-sync
priority 80, heartbeat 3, failover 40, preemption is on
The command (on active side) "hw-module contentSwitchingModule 2 standby config-sync" leads to following result:
switch-active:
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56042: Apr 14 16:21:44.223: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Bulk sync started
2010-04-14T16:21:45+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56043: Apr 14 16:21:44.251: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configurations to Standby CSM, this may take several minutes!
2010-04-14T16:21:46+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56044: Apr 14 16:21:45.995: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:51+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56045: Apr 14 16:21:50.831: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:21:57+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56046: Apr 14 16:21:56.151: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Active: Sending configuration to Standby CSM
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56047: Apr 14 16:22:58.791: %CSM_SLB-3-REDUNDANCY: Module 2 FT error: Active: Manual bulk sync timed out
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56048: Apr 14 16:22:58.803: %CSM_SLB-3-REDUNDANCY: Module 2 FT error:
2010-04-14T16:22:59+02:00 srz16-1b.net.dsh.at/srz16-1b.net.dsh.at 56049: FT CONFIG SYNC: Failed config sync entity send
switch-standby:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2475: Apr 14 16:21:44.232: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Bulk sync started
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2476:
2010-04-14T16:21:45+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2477: Apr 14 16:21:44.240: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: STANDBY:Configuration is being received, This may take several minutes!
2010-04-14T16:21:49+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2478: Apr 14 16:21:48.824: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:54+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2479: Apr 14 16:21:53.964: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Receiving configuration from Active CSM
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2480: Apr 14 16:21:58.852: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Started clearing configuration
2010-04-14T16:21:59+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2481: Apr 14 16:21:59.400: %CSM_SLB-4-REDUNDANCY_WARN: Module 2 FT warning: Standby: Config Sync does not save running-config to startup-config
2010-04-14T16:22:00+02:00 srz31-5a.net.dsh.at/srz31-5a.net.dsh.at 2482: Apr 14 16:21:59.400: %CSM_SLB-6-REDUNDANCY_INFO: Module 2 FT info: Standby: Previous configuration are being deleted from supervisor
The last log message on standby device seems to be correct - there is no CSM configuration after the attempted config sync.
Our configuration includes about 3500 lines and it is really uncomfortable to keep in sync manually.
Maybe someone has the same problem?
kind regards,
Christoph

Hi Christoph,
I am running into the exact same issue. Upon further investigation I've discovered that this is a known bug, CSCtd09117. You can read more about it here: http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd09117 . Apparently this is fixed in ver 12.2(32.8.11)SX323 .
I haven't had a chance to upgrade yet, so I can't verify the fix, but if it works for you please let me know.
Regards,
Brandon

Similar Messages

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Problem with replicated partitioning between two BSO db's. version 9.3.0.1

Hi there,
I have a problem with partitioning between two BSO db’s.
I created the partition, it validates and I made an export for the partion definiton(xml file).
Everything is fine if I set this partition up as transparent partition.
This means I can see the data from the src in the trg db as ecpected.
But when I change over to replicated (what in fact I want to do) nothing happens for the trg site - there are still no data. (Yes I have choosen Update all cells.)
I got no error in any way neither AAS nor in the app logs of src and trg.
(Mayby this it important: one src-dimension is mapped to void for the trg.)
Can anyone give me a hint or even confirm this behaviour ?
Thank you in advance
Andre
Below the log infos:
log of src db:
[Fri Dec 04 15:29:03 2009]Local/AAA///Info(1013210)
User [hyperion] set active on database [db]
[Fri Dec 04 15:29:03 2009]Local/AAA/db/hyperion/Info(1013091)
Received Command [PutReplicatedCells] from user [hyperion]
[Fri Dec 04 15:29:03 2009]Local/AAA///Info(1013210)
User [hyperion] set active on database [db]
[Fri Dec 04 15:29:03 2009]Local/AAA/db/hyperion/Info(1013091)
Received Command [XferReplicatedCells] from user [hyperion]
[Fri Dec 04 15:29:03 2009]Local/AAA///Info(1013214)
Clear Active on User [hyperion] Instance [1]
[Fri Dec 04 15:29:03 2009]Local/AAA/db/hyperion/Info(1023005)
Update of replicated partition elapsed time : [0] seconds
[Fri Dec 04 15:29:03 2009]Local/AAA/db/hyperion/Info(1243010)
Partition refreshed
log of trg db:
[Fri Dec 04 15:29:03 2009]Local/AAA1///Info(1013210)
User [hyperion] set active on database [db]
[Fri Dec 04 15:29:03 2009]Local/AAA1/db/hyperion/Info(1013091)
Received Command [ReqXferReplicatedCells] from user [hyperion]
[Fri Dec 04 15:29:03 2009]Local/AAA1///Info(1013210)
User [hyperion] set active on database [db]
[Fri Dec 04 15:29:03 2009]Local/AAA1/db/hyperion/Info(1013091)
Received Command [ProtocolXchg] from user [hyperion]
[Fri Dec 04 15:29:03 2009]Local/AAA1/db/hyperion/Info(1023044)
Processing distributed request from [P4B5A856A, AAA, db]
[Fri Dec 04 15:29:03 2009]Local/AAA1/db/hyperion/Info(1013091)
Received Command [PutLastUpdatedTime] from user [hyperion]
[Fri Dec 04 15:29:03 2009]Local/AAA1///Info(1013214)
Clear Active on User [hyperion] Instance [1]
[Fri Dec 04 15:29:03 2009]Local/AAA1///Info(1013214)
Clear Active on User [hyperion] Instance [1]

It sounds like you are doing it all correctly. One thing you might try just to be sure you are not getting any data in the target database is the following:
1) clear the target database
2) Run the replication for all cells
3) Run an export of all data on the target database
See if you get anything in the export file, maybe you are getting some of the data or possibly it is a rollup issue. Just a thought.
Jeff

Problem with calculate difference between two dates on monday to saturday

Hello,
I need some help to edit a function tu return number of hours between to dates, including saturdays (09:00 - 14:00) and monday to friday (09:00-21:00);
This is my code;
CREATE OR REPLACE
FUNCTION TEST2( FECHA_INICIO DATE, FECHA_FIN DATE)
    RETURN NUMBER IS HORASTOTALES NUMBER;
    fecha date;
    BEGIN
    if(
      SELECT fecha, to_char(fecha, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') Dia
    FROM (SELECT to_date('FECHA_INICIO') + LEVEL - 1 fecha
           FROM DUAL
        CONNECT BY LEVEL <= (FECHA_FIN - FECHA_INICIO))
WHERE TO_CHAR(FECHA, 'DY', 'NLS_DATE_LANGUAGE=ENGLISH') not IN ('SAT') THEN
        with t as (
        SELECT CASE LEVEL
                             when 1 then greatest(fecha_inicio,trunc(fecha_inicio) + 9 / 24)
                             else trunc(fecha_inicio) + level - 15 / 24
                           end fecha_inicio,
                           case connect_by_isleaf
                             when 1 then least(fecha_fin,trunc(fecha_fin) + 21 / 24)
                             else trunc(fecha_inicio) + level - 3 / 24
                           end fecha_fin
                     from dual
                     connect by level <= trunc(fecha_fin) - trunc(fecha_inicio) + 1 )
        select sum(greatest(fecha_fin - fecha_inicio,0)) * 24 horas
          into horastotales
          FROM T
                   WHERE TRUNC(FECHA_INICIO) - TRUNC(FECHA_INICIO,'iw') < 5 ;
        RETURN HORASTOTALES ;
        ) ELSE IF
        return HORASTOTALES+5;
END;
regards

Ok, let's try this one then. it works as a function, and if you extract the query, it can work as a single cursor too.
create or replace function test2( p_start_date date, p_end_date date) return number
is
   t_result number;
begin
   with firstday as ( select case to_char(p_start_date,'fmdy','NLS_DATE_LANGUAGE=ENGLISH')
                            when 'sun' then 0
                            when 'sat' then 9-least(14,to_char(p_start_date,'hh24'))
                            else 9-least(21,to_char(p_start_date,'hh24'))
                         end day
                    from dual ),
        alldays as (select sum(case to_number(to_char(p_start_date+level-1,'d'))
                                   when 1 then 0
                                   when 7 then 5
                                   else 12
                                end) days
                       from dual
                     connect by level <= p_end_date - p_start_date + 1),
         lastday as ( select case to_char(p_end_date,'fmdy','NLS_DATE_LANGUAGE=ENGLISH')
                            when 'sun' then 0
                            when 'sat' then -14+least(14,to_char(p_end_date,'hh24'))
                            else -21+least(21,to_char(p_end_date,'hh24'))
                         end day
                    from dual )
   select sum(t1.day+t2.days+t3.day)
     into t_result
     from firstday t1
        , alldays t2
        , lastday t3;
   return t_result;
end;

How to keep playlists in sync between two computers?

I have a MacBook Pro and a regular desktop Windows 7, and I have all of my music on both of them. However, I constantly keep adding new songs to different playlists all the time, and this makes it hard to keep everything in sync with both computers and my iPod because I usually sync from my Mac.
Right now I export the updated playlists on one of the computers and import it on the other, but it's quite the hassle just to keep some playlists in sync. I tried using home sharing, but it just keeps downloading duplicates everytime I try to import, I would've thought it was smarter by just adding the new songs but appearently it isn't.
So, anyways, is there any easy way for me to automatically keep playlists in sync between two computers?

I am indeed subscribed to iTunes Match. Are you saying that with Match, it will sync my playlists? I will have to check this when I get home. That would really be a nice surprise!
I sync my iPod to iTunes on my Windows 7 box, but use iTunes on my Mac for synching my iPhone 6 and iPad 2. Normally, I'd be modifying a playlist on the Win 7 box, adding or rearranging songs. However, occasionally, I might download a song to the iPhone while out and about. Then, when I'm back at the Mac, I'd do a sync and add that new song to one of the playlists. Should Match then be keeping the playlists on the two machines in sync?
As for the library replication, I had to do that when I first signed up for Match. I was WAY over the 25k song limit, so I made a copy of the library, and in that copy deleted enough songs to get me under the limit. Also discovered scripting and did some really neat things with that tool. Still have the option when I start iTunes to use the old library, just in case there's something there I need to copy to the smaller lib.

Sucsessful sync between two libraries w ChronoSync?

I've read in various places that you can sync between two Aperture Libraries by using ChronoSync with "Dissect packages" turned on - the one major caveat is the sync can only be one way - which library has the newest information has to be written to the other - no two way syncing.
Anyone have this working? It's not one direction sync as I understand it, but which ever direction you select, those changes overwrite anything done since the last time Aperture's database was updated, right?
Thanks for any feedback.

WIthin my Aperture Library I have both professional and family related work. The way I share family stuff with family is pretty simple. I export the selected family pictures in a project as JPEG files. I import them by reference (don't generate a second copy) into iPhoto. From iPhoto, I have three paths to share: export to my Kodakgallery account, create an album and share on Mobileme and finally, once I have created an album in iPhoto I open iTunes and sync the pictures to my AppleTV. Other family members anywhere in the world can readily see my kodakgallery site as well as my mobileme account.
At home, when family is over, the AppleTV has become the absolute most favorite viewing station, live with music of my selection or theirs!
Hope this helps.
Steven

Can Lion server keep my photos in sync between two macs?

can Lion server keep my photos in sync between two macs? Where should I keep them, we have Aperture 3 and my wife still likes iphoto '11. I've already tried plenty of 3rd party solutions with little success. I simply want my MBP to "mirror" the imac with the exception of iMovie footage. Is this what the server app can do? I am bad enough with computers, but even thinking about a server gives me migraines!

discussing this right now at this link...
http://discussions.apple.com/message.jspa?messageID=1473705#1473705

Problems with Dinamic Link between Premiere pro CC and After Effects CC

I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
I've got a huge workstation:
i7 4990
32Gb ram
GTX780 3gb
256 gb system ssd
2 Tb project storage
*All my hardware and software are update.
I know that a lot of folks are on the same huge problem and I want to ask everyone:
How do you save this?
What is your pipeline?
Are there any solution?
Best practice to use dinamic link in a huge project?
Thanks,
Ruben Gimenez.
R&D iceblink.es
www.rambot.es

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Problems with mobileme syncing ...

Hi everyone. I'm having massive problems with mobileme sync with my iphone, my macbook and MacPC G5. Essentially I want the iphone contacts and calender data to overwrite anything on laptop and pc but I keep getting message that contacts couldn't be synced due to inconsistent data. Despite me overriding it. I'm not sure how I go about confirming that the computers data is valid and actually whether I want to because its the iphone data I want. Then despite saying its synced calenders its not updating on my macbook or PC ... any suggestions gratefully received. Its doing my head in! Oh I'm on Leopard OS.

Hi Chris, Thanks for the advice, I haven't tried that yet. Will do so and pray that it will work. This however doesn't solve the problem of appointments I'm putting on my iphone not updating on PC and laptop - they do however update on mobile me cloud! Any advice greatly appreciated!

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I Have A Problem with Bluetooth connection between my I-Phone and Bluetooth in my auto

I have a problem with bluetooth conection between my auto (2013 Buick) And I-phone 5. I can call out but am unable to recieve incomming calls.When I attempt to answer ,Everthing disconnects and the phone call goes to mail automatically.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Record a videocall with shared content between two endpoints

Good day! I faced a next task a record of a videocall between two endpoints. For example, a videocall with shared content between two DX70. I doubt that MediaSense is able to record content, whereas Telepresence Content Server is extremely expensive solution. What simple way is for sorting out my issue?

I believe that if you edit any song information (Name, Artist, Album, etc.), iTunes refuses to edit the actual file (but keeps a cache record of the changes). If you "Compile iTunes Library" (see below), it will make a change to the duplicate file it creates, and keeps record of the ratings as well.
To compile your iTunes library, go to the "iTunes" option, and select Library... >> Organize Library... and select "Consolidate Files". This will duplicate your files, and move the duplicates to the iTunes Music Folder (organized by artist and such). You can then copy and move this file to your iMac.

Problems with Audio Sync and Rendering

In both problems what happens is NOT consistent. If were, would think was a setting or something I was doing wrong.
About the rendering problem. I capture either through FCP Log and Capture or through my analog to digital "box", Formac Studio TVR. In both cases record in DV setting. When I then Import these files about 3 out of 4 times they need full rendering. But doing all things the same, there is that 1 out of 4th time where no rendering is needed at all. Does not seem to matter whether I capture through FCP or Foremac. Results seem the same. Like I said to begin with, if was consistent would figure that is just how the program is. But due to the time it takes to do a render, sure would be nice if could be avoided some way.
Regarding the Audio Sync. At times, maybe 1 out 10 times, the audio is bad. It begins at the beginning of the film being out of sync maybe two or three frames. But then every 10 minutes of film it progressively get's worse, losing a good 6 to 10 frames as one goes. I can fix by doing a lot of cutting and then moving the film around till it is in sync again, but as you can imagine takes a LOT of extra work. Any ideas as to why this is happening and what could be done to prevent in future??
Thanks in advance for any help you can provide.

I've used flip4mac for about a year and have had no problems with it. I mostly use it to export preview versions for windoze people. The quality is very good, though it takes significantly longer to export than a similar-quality quicktime movie.

A Problem With Recording: Delay Between Tra

I recently purchased an Audigy 2 ZS Platinum Pro to replace my ailing Audigy 2 Platinum from a few years back. I've been trying to do some home recording (namely with Sony's Acid Pro 5.0) and I've been noticing some delay between tracks when I record.
For example, I will record one track, and then record a second track, playing along to exactally what I hear. When the second track mixes down, there is an offset between the two tracks on the order of two or three tenths of a second. This offset produces a noticible doubling effect, and requires me to go in and move the audio track around so that it plays properly.
I've tried other programs (Audacity and n-Tracks Studio) so I figure it's not something wrong with the program. My computer is new, it's running an Athlon 64 3400+, with over a gig of ram, so I can't imagine it's a problem with my computer.
Anybody have any thoughts or experience with problems like this?

bobweb wrote:
I recently purchased an Audigy 2 ZS Platinum Pro to replace my ailing Audigy 2 Platinum from a few years back. I've been trying to do some home recording (namely with Sony's Acid Pro 5.0) and I've been noticing some delay between tracks when I record.
For example, I will record one track, and then record a second track, playing along to exactally what I hear. When the second track mixes down, there is an offset between the two tracks on the order of two or three tenths of a second. This offset produces a noticible doubling effect, and requires me to go in and move the audio track around so that it plays properly.
I've tried other programs (Audacity and n-Tracks Studio) so I figure it's not something wrong with the program. My computer is new, it's running an Athlon 64 3400+, with over a gig of ram, so I can't imagine it's a problem with my computer.
Anybody have any thoughts or experience with problems like this?
Latency issue.
If you can select ASIO drivers (audio settings) on your software then use it and set latency on ASIO panel to ~ 5 ms.
.jtp

Problem with Javadoc gen'in two instances of a sourcefile in the class list

Hallo,
I have a set of source files that I'm gen'ing with the ant task javadoc.
sourcefiles="javadocs/PTConfigServer-root/src/com/palantir/config/util/SshUtils.java,
javadocs/PTConfigServer-root/src/com/palantir/config/util/StafUtils.java,
javadocs/PTCommons-root/src/com/palantir/util/Pair.java,
javadocs/PTCommons-root/src/com/palantir/util/XMLTag.java,
javadocs/PTCommons-root/src/com/palantir/util/MutuallyExclusiveSetLock.java,
javadocs/PTCommons-root/src/com/palantir/exception/PalantirException.java,
javadocs/PTCommons-root/src/com/palantir/exception/PalantirUserMessageException.java,
javadocs/PTCommons-root/src/com/palantir/exception/VersionMismatchException.java,
javadocs/PTCommons-root/src/com/palantir/util/Mutable.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapSet.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapOrderedSet.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapList.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapConcurrentHashSet.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMap.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DefaultDateFormatterFactory.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DateFormatterManager.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DateFormatterFactory.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DateFormatter.java,
javadocs/PTCommons-root/src/com/palantir/util/awt/Awt.java"
The first two gen properly with only one of each class showing up in the class list. Then, starting with the PTCommons files, javadoc lists each class twice in the class list. In the actual generated documentation, there is only one instance of the file.
Has anyone seen this before?
Mary

Im having a problem with the variables.
Part of my original problem might be each pxi was in a different project. and i had two projects each its own IP. Using this method i did not know how use two differnt variables from two differnet pxi' s with the same program.
if your still following.
i tried a simpler way
i modified my project to include both ip addresses.
this way In my window environment my vi calls the variable. i made sure that i right clicked and chose the variables from the correct ip.
what i have is two status indicators and two update buttons.
the status tells me what stage the test is in
the update button is for the user at the end of the test he can update the screen with the results.
currently only my second pxi is updating status and also the update works
this is my windows vi alias file
[My Computer]
My Computer=localhost
[S4000xH-System1]
S4000xH-System1=192.168.110.10
[S4000xH-System2]
S4000xH-System2=192.168.110.3
do i need to bind to source or use the single writer. im going to try to undo the single writer seems like this would could onluy better it but doesnt seem like its for my application.
i forgot to mention that the varibles i use were there listed as dependancies for the windows evirment have a blue question mark but show what is wrong.
where i have the variables under the ip address there are no blue question marks

Problem with config sync between two CSM-S modules

Similar Messages

Maybe you are looking for