OCS Calender user provisioning is not happening to AD-OID integrated users

Hai,
I did an OCS installation with 10G IM.I integrated OID with AD on a organsational unit level.It works fine.WNA is also working fine.My problem is I couldn't provision those migrated users with calender service.Throug calender administrator it gives an error saying cannot create user.I tried manually also by using uniuser it gives an error message saying you don't have right to create.
But for normal users I can do this without any problem.
My migrated users are under ou=ocs-test,dc=mil,dc=bh
and normal users are in cn=users,dc=mil,dc=bh

As per Oracle the calender user synchronisation is only possible if we are integrationg ad users to cn=Users,dc=mil,dc=bh(for me) and is working fine.
I had raised a tar and they called me and informed

Similar Messages

I can not open my Safari. It quits unexpectedly. The issue happens with a single user account. It does not happen to anyone else in my family. Please help.

I can not open my Safari. It quits unexpectedly. The issue only happens to a single user account. It does not happen to anyone else in my family. Please help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

In iGoogle with firefox 4 I am unable to get the tabs to change down the left hand side or get any response to selections made to items like calender or weather this does not happen in Explorer 9.

After loading FireFox 4 all worked OK for a while. Now when trying to change the tabs on left hand side (Home etc) or change selections on the apps (Weather or Calender) nothing happens. I am running iGoogle with FireFox 4 but this does not happen when trying the same thing with Explorer 9.

Having the same problem, but not only can't change tabs, but cannot open links on the page. I thought that by reducing my iGoogle page to one tab, and putting what content I could into app tabs that would solve most of the problems. It did some. For a while I was able to bypass this with the iGoogle Tab Remover add-on but it stopped working last night and I've not been able to get it working since.

I lost all of my calender info and did not have the cloud activated. Any ideas on why that happened? Any idea if I can get that back?

I lost all of my calender info and did not have the cloud activated. Any ideas on why that happened? Any idea if I can get that back?

Not sure why this happened, but are you syncing calendar events direct with a supported calendar app on your computer?
If not, calendar events are included with your iPhone's backup which is updated by iTunes as the first step during the iTunes sync process. If you haven't synced your iPhone with iTunes since this data went missing, you can try restoring your iPhone with iTunes from your iPhone's backup. Do not sync with iTunes before doing so, and do not update your iPhone's backup before doing so when prompted.

AD provisioning is not creating accounts

Hi All,
I am trying to provisiong AD resource using a simple Role.
When I assign the Role directly to user in admin UI its working fine.
The steps I have taken:
1. get view
2. assing the role
3. reprovision call
But in the workflow, its not, any clue why? Here is the provisioning code
Any help is truely appreciated.
--sFred
<Action name='provisionUser view' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='getView'/>
<Argument name='type' value='User'/>
<Argument name='id' value='$(provisionUserView.waveset.accountId)'/>
 <Argument name="authorized" value="true"/>
<Argument name='TargetResources'>
<List>
<String>Lighthouse</String>
</List>
</Argument>
 <Argument name="Form" value="Empty User Form"/>
<Return from='view' to='provisionUser'/>
</Action>
<Action>
<expression>
<block trace='true'>
<dolist name='tRole'>
 <ref>targetRoles</ref>
 <append name='provisionUser.waveset.roles'>
 <ref>tRole</ref>
 </append>
 </dolist>
 <set name='provisionUser.resourceAccounts.selectAll'>
 <s>true</s>
 </set>
<dolist name='attr'>
<ref>resourceList</ref>
 <set>
 <expand><s>provisionUser.create.accounts[$(attr)].selected</s></expand>
 <s>true</s>
 </set>
 <append>
 <ref>provisionUser.waveset.resources</ref>
 <ref>attr</ref>
 </append>
</dolist>
</block>
</expression>
</Action>
<Action application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='refreshView'/>
<Argument name='view' value='$(provisionUser)'/>
<Return from='view' to='provisionUser'/>
</Action>
 <Action name='set map options'>
<expression>
 <block trace='true'>
 <set name='provisionOptions'><new class='com.waveset.provision.ProvisioningOptions'/></set>
 <invoke name='setNoCreate'>
 <ref>provisionOptions</ref>
 <Boolean>false</Boolean>
 </invoke>
 <invoke name='setNoUpdate'>
 <ref>provisionOptions</ref>
 <Boolean>false</Boolean>
 </invoke>
 <invoke name='setNoDelete'>
 <ref>provisionOptions</ref>
 <Boolean>true</Boolean>
 </invoke>
 </block>
</expression>
 </Action>
 <Action application='com.waveset.provision.WorkflowServices'>
 <Argument name='op' value='reProvision'/>
 <Argument name='user' value='$(provisionUser)'/>
 <Argument name='accountId' value='$(provisionUser.waveset.accountId)'/>
 <Argument name='options' value='$(provisionOptions)'/>
 <Argument name='subject' value='Configurator'/>
 <Argument name='retryEnable' value='true'/>
 <Return from='WF_ACTION_ERROR' to='actionError'/>
 </Action>

As per Oracle the calender user synchronisation is only possible if we are integrationg ad users to cn=Users,dc=mil,dc=bh(for me) and is working fine.
I had raised a tar and they called me and informed

When I try and play music on my iPhone downloaded from iTunes it says 'this URL is not found on this server'. This does not happen when I play the same music through my iPad. Can anyone help?

When I try to play music downloaded from itunes on my iPhone 4S it says 'this URL is not found on the server'. This does not happen when I play the same music on my iPad. The music plays fine. The message also comes up when I try and login to iTunes on my iMac. Can anyone help?

I too am having the same issue as the OP.
Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

I can no longer open my Comcast email when I launch from Firefox - it takes me to the email preview page but will not allow me to open the inbox . Does not happen with Internet Explorer.

This started last month - when I go to my comcast account, I'm able to log on and view my account but can not open my email inbox. When I enter my user name and password, I'm taken to the "Email Preview" page so that I can see a partial view of the inbox but when I click on "View Entire Inbox" it jumps to a page showing that it's loading but goes right back to the preview page - I can't open any of the emails. This does not happen when I use Internet Explorer or Firefox on my older laptop.

Did you find out what addon?

When I try to open the "markets" page on the Firefox hompage, it displays for 3 or 4 seconds and then drops off; I get a white screen; this does not happen with Explorer.

When I open "markets" from the homepage, it comes up but drops off after a few seconds and
I get a white page. This does not happen with Explorer. A similar but much more extensive
problem happened a month or so ago (I couldn't open attachments). I called Microsoft and the
fellow messed about with my computer for an hour or so, but ended up saying he couldn't help
me. However, when he went away, the problems went away.
== This happened ==
Every time Firefox opened
== two weeks ago?

~~red:'''''displays for 3 or 4 seconds and then drops off'''''~~
If you have RealPlayer Browser Record Plugin '''extension''', disable/remove the RealPlayer Browser Record Plugin extension in the RealPlayer Preferences (RP: Tools > Preferences > Download & Recording) . Restart Firefox and test.
See Noah_SUMO's illustrated answer in this thread if the above is not clear: https://support.mozilla.com/en-US/forum/1/557689?
The RealPlayer Browser Record Plugin '''extension''' adds some extra features like saving media files.
Be sure not to get confused with the RealPlayer '''plugin''' (Tools > Add-ons > Plugins) that plays media files.
https://support.mozilla.com/en-US/forum/1/557689?
http://support.mozilla.com/en-US/forum/1/459823
https://support.mozilla.com/en-US/forum/1/446905?
https://support.mozilla.com/tiki-view_forum_thread.php?forumId=1&comments_parentId=472596
http://support.mozilla.com/en-US/forum/1/461211
http://support.mozilla.com/en-US/forum/1/376867
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]].
~~red:'''''Other Issues'''''~~: to correct security/stability issues
'''Update Java''': your ver. 1.6.0.17; current ver. 1.6.0.20 (important security update 04-15-2010)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''Update Shockwave for Director''': your version 11.0; current version 11.5
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
IMPORTANT: I have found it wise to always restart your system after doing anything with Adobe products.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''

Issue in Workflow- Field Update is not happening

Hi Friends,
I am facing an issue to update a check box field Released.
I have created a task having Advance with Dialog opiton,Background processing to update the Checkbox field.
The BOR Object type used is BUS1006 and method is CHANGE. Everything looks fine when tested the task as well as the workflow in test mode and it is working fine in both the cases. But some how, this field update is not happening over the CRM 2007 Web UI. We are assuming it is due to user authorizations or some other settings ( like assignment of backend user to the workflow)
for doing this task. Can some one give us some pointers on this. This will be of great help.
Thanks,
Udaya

Hi Imtiaz,
I am new to this. Can you please give me some pointers on how to check whether WF-BATCH has the needed authorisations and the process can be executed in background.
Reply me at your convenient time.
Thanks a lot for your response.
Regards,
Udaya

Auto Source determination not happening

Hi Guruz,
I have a material assigned to a quota arrangement usage in material master - MRP 2 View.
Source list maintained for the material/plant with 2 vendor codes and both releveant for MRP '1'
Quota arrangement maintained with proper validity periods.
But when i generate purchase requisitions via MRP, the source assignemnt is not happening. MRO generates PRs but the source of supply is blank. I have to assign the source either by ME57 or via 'assign source' tab in PR item details.
I have maintained EVO parameter in my user id also.
Not sure what I have missed. Please help!
Regards
Greg

Hi,
Please check following also -
1) Whether the vendor is not blocked for purchasing
2) If QM is activated & Delivery Release is required for the material, then check whether the Quality Info Record is maintained & the vendor is released for puruchase.
3) The scheduled delivery dates are lying inside the validity period of the Quota Arrangement & Source List
Regards,
Prasahnt Kolhatkar

Dante font used in manuscript - when I try to save as a pdf document in Microsoft Word whole pages change their look, with wide gaps forming between certain paragraphs or sections. This does not happen with other fonts.

Dante font used in manuscript … when I try to save as a pdf document in Microsoft Word whole pages change their look, with wide gaps forming between certain paragraphs or sections. This does not happen with other fonts.

OK, we've got it!
What is happening is that when you use Microsoft's save as PDF in Word, the font isn't embedded even though the font is tagged to allow embedding. Furthermore, Microsoft doesn't properly put the font name into the PDF file such that Acrobat or Reader can readily find the font installed on your system such that the text can be properly displayed and/or printed. Acrobat and Reader attempt to display and/or print the text using a “substitution font” and of course, as they say, YMMV (“your mileage may vary”)!
I personally submitted the report of this problem (both the embedding and the font name problem) to Microsoft. They acknowledge the bug, tried a fix and provided me a build with it, but it wasn't right. Maybe they will ultimately fix it, maybe they won't. We don't know yet. We do know that if it is fixed, it will be fixed only for Office 2013 (problem occurs with all Office applications since they use the same PDF generation code) and thus such a fix won't help you.
Adobe Acrobat Standard and Acrobat Pro both provide an Adobe PDFMaker plug-in to Office applications (including full support for Office 2010) that adds an Acrobat Toolbar as well as a Save as Adobe PDF menu item. The resultant PDF file fully supports embedding of OpenType CFF, TrueType, and Type 1 fonts and in many other ways produces much superior PDF with a full range of PDF generation options not available with the Microsoft PDF. (Note that beginning with Office 2013, Microsoft does not support Type 1 fonts in Office documents at all, even for existing documents!) The Acrobat Office functions are widely used and respected in the end user community and whatever “issues” there are (all software has “issues” of some type - it is a matter of how many and how severe), you should be in much better shape for PDF production that with what you currently are using.
Good luck and let us know if this resolves your problems. (Note that you can download and install a free fully-functional 30 trial of Acrobat Pro to assure that it meets your needs! You can then buy a license and activate what you already have installed.)
- Dov

Reversal of a reversed document should not happen

Dears
In our system, user is able to reverse an already reversed document, which should not happen.
In the Message Control F5 361, nothing has been changed to make this warning or information.
Hence the standard is 'error'. But why the system is allowing the reversal of a reversed document then ?
Could you please provide inputs ?

Hello Nikitha,
Please create one validation according to your requirement. PFB the relevant T codes to create validation.
GGB0 - Create Validation
OB28 - Activation of FI validations
GCT9 - Transport: Validations
Please let us know do you still require any more information
Thanks & Regards,
Lakshmi S

WD Java application translation to japanese not happening

Hi All,
I'm working on EP7.0 version and i need to do translation of webdynpro application into japanese.
I've done the following:
1.I created a new .xlf file "<>.wdview_ja.xlf" and translated the labels,text,buttons to "ja" characters.
2.My folder has two xlf files:one default .xlf and other <>_ja.xlf
3.I rebuild,reload and deploy the application.
4.I changed the language of browser settings to ja.
Now following is the issue:
When the application is deployed,the standalone application shows all the translated texts,but when i access the same application through portal role i do not see the translation.
I cleared all my browser cache,navigation cache.
I tried to shut down my laptop and restart, one time it showed the translation but later on when tried to do the same thing translation was not happening.
I checked the below thread internationalization problem - default language of wd in portal
I do not exactly follow what needs to be done in my case.
But when i checked the "current locale" in language resources it still shows "en" eventhough i changed the browser settings to"ja".
Can anyone please help me out here.
Thanks and Regards,
Pradeep

Pradeep,
After rebuild, reload and deploy the application. Could you please check these steps once again?
1. Whenever you changed .xls view to ja_xls file
1.1 Is it created Property file of ja_xls?
2. While login into portal, you are not able to see Japanese?
2.1 Is it your Role, Worksets, Page and IView Names converted into Japanese Language?
2.2 Check the User:- is it Username is changed to Japanese Language?
Hope these steps helpful for you !!!
Best Regards
Vijay Kalluri

Fork issue: Agent assignment is not happening in 1 branch but working for t

Hi,
I have a fork with 3 branches.
Agent assisgnment is happening in 1 branch but not happening in the other 2 branches.
The branch of fork that works has all the agents in an internal table.I created a 'multiline container element' and assigned the agent to this element in the next step.This is happening in a loop, until all the agents in the internal table are sent a workitem.This is working fine.
The branch of fork that doesn't work has a single agent.I determine the agent in a step before fork. The step immediately after fork must be assigned the agent - as an expression.
For testing purpose, i assigned a 'User' instead of an Expression , yet in the log, i get 'No Agent'. What should i do?
Could you please help in resolving this issue?
Regards,
Monica.

Hi Monica,
check my answer here:
Agents are not getting assigned properly
Plus could you please stop creating new threads in this forum with the same problem?
Kind regards, Rob dielemans

When I closed out of yahoo email, get a blank page on every tab if any are opened. I have to exit out & restart firefox . It does not happen w/any other browser.

When I sign off on yahoo email. I get a blank page on every tab if any are opened. I have to exit out & restart firefox . It does not happen w/any other browser. I have no malware or viruses. Please advise.

Actually, it's not obvious & common sense would dictate that users' bookmarks would not be left stuck to random computers even once they've logged out of the account. No one wants that if it's a public work computer or if they're traveling & use an Internet cafe. As I am not the only one who has noticed this issue or had bookmarks disappear/be deleted, in addition, common sense would indicate it's not really a very good system. And carrying around a flashdrive to run Firefox off of it is a good solution? Really? Just curious why a useful feature such as being able to login & use your preferences & bookmarks & then logging out removes your preferences when you're gone hasn't been developed. Yahoo keeps my preferences when I logout (it's called My Yahoo!). Maybe a My Firefox or My Chrome solution could be developed.

OCS Calender user provisioning is not happening to AD-OID integrated users

Similar Messages

Maybe you are looking for