ODC - Created cabinets not appearing

Hey
My original installation of ODC used a local Sql Express database, but I recently moved it over to use our corporate Oracle database environment via an ODBC. While this process was troublesome (had trouble getting the Oracle client to work) I eventually got around it and thought I was ok. However, then one one my cabinets (APCabinet_OFR) went missing. When I looked in the administration pane, I could see one (APCabinet_KFI) but not the other.
I recreated the cabinet and did a refresh, but it wasn't there again. I thought I had a db issue, so I check the ECFILECABINET table, and the missing cabinet was there. I did a restart of the app and the machine with no change in effect.
I switched back to the Sql Express database, and sure enough, both cabinets showed up. I created a new one and it showed up too.
An ideas?
Cheers,
A

I am going to answer my own question as I have had some help from an SR.
Here's what I had to do to get it to work:
- Download the 32 bit client (both these packages)
     - Instant Client Package - Basic: All files required to run OCI, OCCI, and JDBC-OCI applications
     - Instant Client Package - ODBC: Additional libraries for enabling ODBC applications
- Extract both to the same folder and run the odbc_install.exe
- Download and Install the 32 bit ODAC
- Create a TNSNames.ora file and set the env variable TNS_ADMIN
- Open ODC and Configure a new "other" database connection
     - Choose “Oracle Provider for OLE DB” and set the database as the same name in the TNSNames.ora file
     - Initialise the database
Hope this is helpful to someone else.

Similar Messages

AA Depreciation area created but not appear in asset master

Hi you all!
I need to make a Depreciation area (which is a derived one - diffference between two others) visible in asset master data. I have tried but unfortunately I could not solve this.
Dep area is created and visible in reports only but it does not appear in Asset master.
Can someone help me?
Regards,

Further to update:
In OADB, you need to mention it as "Derived Depreciation Area".
You need to give the depreciation sign.
For example if you have 01 as Current Values, 02 as Historic Values, you can create 03 as derived depreciation area.
That means 03 is the resultant of 01 minus 02.
03 = 01 -02
Please refer 1144500 and download the configuration notes to see how the derived depreciation areas are being created. This note is particularly for SORP requirements within UK for Public Sector Undertakings. You cannot us this configuration for countries / industries.

Newly Created Hierarchy Not appearing in Query for restriction

Hi Experts,
Iam new to dealing with hierarchies in BW.
Our R3 team recently added node to 0material hierarchy. I went to infoobjects in RSA1 and under 0material i found two hierarchies
Product Hierarchy for Material MARA &
Reporting Hierarchy
in the contect menu for "Product Hierarchy for Material MARA " i clicked chnage and in the screen that followed, i clicked display modified version and it showed new nodes added by R3 team. Then i clicked the Activate button and got it activated.
We have a report which uses the Hierarchy and in it I cant find the new nodes..
Can anyone please help me??
This is very urgent..
Thanks,
DV

Hi Edwin,
I checked there..there is nothing in the list.
DV

Created new data source, does not appear in the list

Hi I created a new data source using information provided in http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_1.html. But the new data source I created does not appear in the wizard. Could some body give me a clue? Can somebody point me to more detailed documentation on how to integrate a new data source into Reports Builder?
thanks
Srinivas

Hi
I desperately need help to troubleshoot why my data source is not appearing in the list eventhough I feel I have done things as per the tutorial. From reading the tutotial I am not clear -
- If specifying an icon is mandatory. If I don't specify an icon my datasource should still appear right?..without an icon?
- It is mandatory to implement the editor. I have hard coded things because I don't foresee any interaction by a user with the data source. There is just one column which WILL always appear if this DS is chosen.
- Finally in the integration instructions(http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_5.html) they mention that the classes have to be compiled with "report build" , is that a tool?
thanks
Srinivas

When I create a new mailbox, it does not appear in alphabetial order. It appears at the bottom and I have to manipulate it to get it in its proper place. This apparently started when I upgraded to Mountain Lion. Any ideas?

Do you know why new mailboxes I create do not appear in alphabetical order? They appear below all other mailboxes and I have to manipulate them into their proper place. This apparently started when I upgraded to Mountain Lion. Any help would be much appreciated, as it's annoying and time consuming.

Do you know why new mailboxes I create do not appear in alphabetical order? They appear below all other mailboxes and I have to manipulate them into their proper place. This apparently started when I upgraded to Mountain Lion. Any help would be much appreciated, as it's annoying and time consuming.

Enhancement view does not appear in my list of views

Hi ,
I have created an enhancement and now I used the wizard to add a new view to this application.The view created does not appear in my list of views but it appears in my Z BSP application.
Please help!
Regards
Shilpi

Check whether you are in Enhanced Version of UI Component ! (Original UI CMP name and Enhanceset : Z*)
Thanks
Allot points if this helps !

Property not appearing in Taxonomy list?

Hi All
I have created 2 properties which will be used to classify documents in a taxonomy structure. However I have a problem - the properties I have created do not appear in the property list in the 'Taxonomy Query Builder'. I am not sure why?
Does anone have any ideas what I am missing?
Thanks in advance!

Thanks for that it worked on for the Taxonomies however the values are now not appering in my XML form - the combo boxes are empty?
Do they have to be manually inserted in the form? i.e Static combo box?
Thanks

Subtype Mathod not appearing for BO in workflow task

Experts
I have created a subtype ZBUS100106 for BO BUS1001006. Also I have created a new method for custom BO. When I am assigning the BO BUS1001006 in workflow task, the new method whcih i have created is not appearing. What do I need to do to get the method in workflow task.
Sathish

Well if you don't say so in your post, I just assume you didn't mostly because of your problem.
In the forum guidelines it is explained how to formulate your questions in order to get the best results. For instance describe what you did up to the point you got stuck, the release your on could be of importance and what you already tried to resolve the problem.
Regards,
Martin

SAP Portal custom themes not appearing in 'Personalize' link

Hi.
I am trying to make customised themes available to my users through the 'Personalize' link in the masthead. I have successfully customised the Personalize function so it now includes only the ability to choose themes - all other forms of personalisation have been stripped out. I have also successfully created a customised theme.
My problem is that the custom theme I have created does not appear in the values list within Personalize -> Portal Theme. Only SAP standard themes are appearing in the list. I have managed to assign the theme to users through a display rule, so I know the theme works OK. I have tried exporting and re-importing the theme, this did not help.
Does anybody know how I can make my custom theme available through the Personalize -> Portal Theme list?
Thanks in advance for any help,
Simon.

Hi,
Only the themes present in the desktop in which the users fall will be available in the personalize link.
In detail
System admin->portal display->Desktop and display rule ->open your desktop (in which the user falls)
Add all your custom theme to the desktop.
By now the custom theme will be present in personalize->custom theme.
Regards
Karthiheyan M

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

ASBN creation in iSupplier - PO details not appearing on Create ASBN page

Hi,
I have created PO in Purchasing.
In iSupplier Portal,the PO details are appearing on the Create Advance Shipment Notice page but the PO details are NOT appearing on the Create Advance Shipment Billing Notice page.
Oracle Applications : 12.1.3

HI,
Thanks for your reply.
I havent done any sourcing yet, because i was not able to proceed with creation of RFI because my items after approval was not appearing.
FYI.
This sceanrio is already escalated to OSS, i need to verify if this is an isolated case, product error or user error.
Please help!
many thanks!

Event created on iPhone does not appear in iCal

When I create an event on my phone and sync, it does not appear in iCal. Events created on my laptop sync without issue. Contacts sync both ways, but calendar events do not go from the phone to the computer. I am not using MobileMe to sync, simply using the USB cable.
I have tried the following to resolve my issues:
* Make sure iTunes and iPhone are up to date
* Make sure all calendars are set to sync with iTunes
* Try different USB ports on the laptop
* Restart phone and computer
* Reset sync history in iSync and re-sync
* Follow directions in this support article: http://support.apple.com/kb/TS1627 to do a full reset of sync history and re-sync
Yet after trying all of those solutions, I still cannot sync events created on my phone to my laptop. Does anyone out there know of anything else I can try that might work?
Thank you,
Cameron

After a trip to the genius bar, I found how to solve this problem, at least for me:
0) Plug in iPhone
1) Start iCal
2) Export all calendars (File -> Export)
3) Quit iCal
4) Delete all calendars from ~/Library/Calendars
5) Start iCal
6) Import all exported calendars
7) Start iTunes, configure syncing to overwrite calendars on phone
8) Sync iPhone

Created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

You are using an older version of firefox, upgrade your browser to Firefox 8 and try
* getfirefox.com

When creating a new project, the step "new sequence settings" doe not appear automatically, what to do?

Hi there,
I have a question I am doing product videos for a comany they would like me to do this in a format that is 16:9 and in HD. Since they don't know on which channels they want to publish it but it is certain they will publish it on youtube I wanted to do it in the settings HDV and then DVCPROHD 720p24 or even 1080p24. I have bought the license of Premiere online and for some reason I do not have the option in the beginning when I create a new project to change the sequence settings. They do not appear and afterwards I cannot change them. Do you guys have an idea what can be done in order to access this setting before the project ultimately opens?
I'd highly appreciate any kind of help on the matter!
Cheers,
Mascha

Or do this:
or this

Shipping data tab not appearing while creating intercomapny STO PO

Hi all,
I am processing the intercompany stock transfer scenario. I have done all the necessary settings for the plant and intercompany billing, but while creating the purchase order I am unable to get the shipping tab as the system cant read the shipping data for the respective vendor. In turn I cant see the purchase order in VL10B.
Kindly help in this.

Hi,
1. Please check in your vendor master in T-code XK03
2. In vendor master , the plant might have defined as plant as vendor in Tab purchasing data > Extras >additional purchasing data,
3.If plant field is not appearing there then change plant field in vendor account group field status maintenance from suppress to optional & maintain in vendor master.
Regards,
Ajit

ODC - Created cabinets not appearing

Similar Messages

Maybe you are looking for