ODC pre-commit script for QA

I would like to create a script after indexing before commit that will do the following, checking to see if someone has done something close.
1) before commit randomly pull 1-5% of the batches and put them in QA (status)
2) if the batch has come from QA (status), don't pull it again

I have an ecIndex_BatchPrecommit sub where the status of the batch is changed from indexing to 'qa review'. I would like to close the indexing batch at this point.
Currently in the precommit I have Cancel=True and when the precommit exits I am back/stay on the indexing screen. I would instead like to close that batch (since the status has been changed).
Can this be done?

Similar Messages

  • I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

    I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
    Thanks for your help in advance....

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • I'm not able to upgrade my Mac to itunes 10.5. Keep getting message "Run pre upgrade script for apple mobile device support" any help please?

    Hi I'm not able to upgrade my Mac OS X 10.5.8 to itunes 10.5 Keep getting message "the following install failed. run pre upgrade script for apple mobile device support" contact software manufacture for assistance. any help please?

    Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
    Thanks!

  • I have tried to upgrade Painter 11 on my iMac running OS X 10.5.8. I keep getting the error message :- : The following install step failed : run pre install script for Corel Painter11 _ SP1 . Contact the software manufacturer for assistance   " Help pleas

    I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
    I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
    Does anyone have any suggestions, please ?

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Anyone have a DVD player script for playing clips?

    I'm new to Applescript and I'm trying to find or write a simple script for playing video clips in DVD Player in a row, so that I don't have to watch a clip, then minimize the play window, then select the next clip from the Go menu. I have four clips that I would like to play back to back. This doesn't seem like it would be too hard to do, but for the life of me, I can't figure it out.
    Anyone have some advice (or a pre-written script) for a pathetic newbie?
    PowerBook G4   Mac OS X (10.4.7)  

    I think maybe I wasn't clear enough in my original question. These aren't clips that I have saved on my computer or clips that are on the DVD itself, they are just clips I set using DVD Player (using the New Video Clip command in the Control menu).
    The problem is that the DVD has no chapter markings. The entire 82 minute film is one chapter. We have permission from the producer to show only segments of the film, so I created clips in DVD player of the parts I want to show. However, right now, I can only play them one at a time and then have to minimize the display area and go to the Go menu and select the next video clip. I have four named video clips set for the DVD. I would like to write a script that I could run that would play them all in a row.
    I feel like I must just be missing something obvious.
    It seems to be that the script should just be
    tell application "DVD player"
    activate
    play named video clip "background"
    play named video clip "Cizik"
    play named video clip "Durley"
    play named video clip "end"
    end tell
    but that's not working. The clips show in the Video Clips window (if I go to the Go menu), so evidently the computer knows they're there, but basically nothing happens if I try to run that script except 1.852402768E+9 showing up in the Result window (I feel like I should know what that means, but of course I don't).
    Is there some trick for directing it to the clips that I'm missing? Or some other command I need to put in first?

  • Configuring Commit driver for IPM 11g in ODC

    Hi,
    I am trying to configure the commit driver for a commit profile.
    I have selected the Oracle I\PM 11g Commit Driver and clicked on configure button,
    As I click on configure button, it pops up an error message saying:
    Run Time Error '40009' :*
    The following error occured configuring the commit driver.*
    Error Number: - 2147024773*
    Error Description: Automation error*
    The filemane, directory name, or volume label syntax is incorrect.*
    Could some one help me on this, Am I missing any configuration or files?
    Regards
    Sri

    Hi,
    I have 64 bit JVM installed on my Machine which is default JVM on my machine.
    As 64 bit is required by other programs, I dont want to delete that.
    Can I install 32 bit JVM separately and point my ODDC to 32 bit JVM. If yes, could you please tell me how to do that?
    pointers to any documentation around that is fine.
    Regards
    Sri

  • Problem: trying to update all detail rows on pre-commit (MASTER DETAIL FORM

    Hi:
    I got a MASTER DETAIL form... and I need to update every detail row of this form (if the master was updated) before commiting the changes. the problem is that i cannot do that for instance in PRE-COMMIT or ON-COMMIT... it's an "illegal operation". I achieved part of it by coding KEY-COMMIT... but that did not solve the all problem. first take a look of the kind of code i want execute before commiting.
    form trigger key-commit code is is somehow like this:
    DECLARE
    tot_line NUMBER (3);
    line NUMBER (3);
    begin
    IF NAME_IN ('system.form_status') = 'CHANGED'
    THEN
    GO_BLOCK ('DETAIL');
    LAST_RECORD;
    tot_line := GET_BLOCK_PROPERTY ('DETAIL', current_record);
    FIRST_RECORD;
    line:= 1;
    LOOP
    :detail.quant := :detail.quant + 1;
    EXIT WHEN line= tot_line;
    next_record;
    line:= line+ 1;
    END LOOP;
    FIRST_RECORD;
    GO_BLOCK ('MASTER');
    END IF;
    COMMIT;
    end;
    The problem is for instance when the users close form in the "X" button (right top, near minimize form) ... If they do that Forms ask "Do you want to save changes?" ... and with this i do not execute the update of the detail rows...
    But there are other situations when this happens... for instance if EXECUTE_QUERY when i change a record...
    Anyone help?
    Joao Oliveira

    Use PRE-UPDATE trigger (Master block).
    begin
    update <detail_table>
    set quant + 1
    where <detail_table>.<relaition_column1> = :<Master_block>.<relaition_item1>
    and <detail_table>.<relaition_columnN> = :<Master_block>.<relaition_itemN>
    and <detail_block_WHERE>;
    EXCEPTION WHEN OTHERS THEN NULL;
    end;

  • Script for Automator to reorder text in file/folder name.

    I have a folder full of pictures named by their first and last names. I need them to be renamed by listing them by last name first, first name last in order to get them alphabatized properly. Anybody out there have a nice Automator script for me to make this happen? I'm new.
    Looking for it to look like this:
    Brown, John

    Try this (should work for "John H Smith" --> "Smith John H" as well):
    The Run Shell Script Action is:
    for f in "$@"
    do
        basename=${f##*/}
        path=${f%/*}
        ext=${f##*.}
        name=${basename%.*}
        if [[ "$name" =~ \  ]]; then
            fname=${name% *}
            lname=${name##* }
            name="$lname $fname"
            mv "$f" "$path/$name.$ext"
        fi
    done
    If you want a comma, then change: name="$lname $fname" to name="$lname, $fname"
    As with all scripts, back-up the files before running

  • Project Online - Cube script for building files

    Hi
    We have to use Project Online for our solution and we need to build a reporting database in SQL.
    Instead of building the schema manually,are there any pre built 2013 ones for use?
    Also, would there be any ETL scripts for building the cubes available or are all of these only developed through paid services - ie Project Hosts, Agorain?
    Regards
    Sean 

    Hello,
    There are some SSIS package examples / blog posts you can start with but each organisation would have different requirements so it would be difficult to have a pre-built production SSIS package that suited all. The links below might help get you started
    with creating your custom SQL Reporting database / data warehouse:
    http://pwmather.wordpress.com/2014/03/26/projectonline-data-via-odata-and-ssis-in-sql-database-table-on-premise-msproject-sharepointonline-bi-ssrs-office365-cloud/
    http://nearbaseline.com/blog/2014/04/project-site-custom-list-reporting-using-ssis-odata-connector/
    http://msdn.microsoft.com/en-us/library/office/dn794163(v=office.15).aspx &
    http://www.microsoft.com/en-us/download/details.aspx?id=43736
    To create an OLAP cube from you custom data warehouse would required you to create the code to do that. You could look at using one of the Microsoft partners to do all of this for you as a paid service.
    http://office.microsoft.com/en-gb/project/microsoft-project-partner-resources-ms-project-FX103802119.aspx
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Pre-built EULs for Payroll/HRMS

    Where can we obtain pre-built EULs for the following Applications modules Payroll/HRMS?

    Hi,
    You will have to load import the EUL stored in $AU_TOP/discover using the adupdeul.sh script. See note 257798.1 for full details.
    Rod West

  • Problem in Sap script for Check printing

    Hi all,
      I have problem in Check printing for FI Module. In Tcode f-58 i am taking the printout of checks. For my user they want to move the main window in upwards, but the sap script <b>F110_PRENUM_CHCK</b> not allowing to move upwards. how to do this, its urgent. plz
    point wil be sure.
    Gowri

    Hi
    Copy the script F110_prenum_chek to some ZCHECK and do the changes.
    Why you can't change the MAIN window towards up?
    You can changes ths ize of it by adjusting the setting of it .
    generally we use some pre printed stationary for this in which all the line item data with doc numbers is printed on top and the check will be in bottom
    and in check we just print the few fields in the right positions.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Test Script for Billing

    Hello Experts,
    I would like create test script for Billing.Since i have no clue about test script coz in my previous organization we have not made any script for testing.Now i would like to create testing for Billing.
    Could you all explain me what are the pre - requisites for testing only for Billing.
    What are the different ways for testing to perform since i have never worked on testing on documentations.
    Your reply would appreciate.
    Thanks
    Shri...

    Test script is nothing but unit testing through which you list down the steps that are needed to execute a test case and record the results.
    In your case, since you wanted a test script for billing, first you need to identify the different types of billing documents configured in production client.  For each and every billing document type, you need to create a test document and record in the following format
    Test Scenario No.
    Scenario:::Billing
    No.::TCode:::Description:::Input Data:::Output Data:::Remarks (OK/Error)
    We call this process as ASAP Methodology.  The prescribed format you can get in service market place.
    thanks
    G. Lakshmipathi

  • Update Table statement in pre-commit trigger

    Hi,
    I would need to update one table before commit in the form and hence I need to write an update table statement in pre-commit trigger. Can anyone help me with the sample code or how sould i be able to write a Update table statement from form-level trigger. Normal update statement is throwing me errors.
    Thanks in adv

    I wouldn't recommend the PRE-COMMIT trigger unless it is your requirement to execute the UPDATE statement every time the form commits, whether it is updating or inserting or deleting.
    Other wise you can use the PRE-UPDATE, PRE-DELETE and PRE-INSERT triggers; for this case you create a procedure under Program Units node in the Form's navigator that includes your "UPDATE" SQL statement and you call this procedure from the triggers you need to execute it from.
    Example:
    PROCEDURE UPDATE_MYTABLE IS
    BEGIN
      UPDATE MYTABLE SET MY_COLUMN1 = MY_VALUE1,
                                       MY_COLUMN2 = MY_VALUE2,
                                       MY_COLUMN3 = MY_VALUE3
      WHERE ... condition;
    END;
    PRE-UPDATE trigger code:
    BEGIN
      UPDATE_MYTABLE;
    END;Try it and let us know if this is your requirement.
    Tony
    Edited by: Tony Garabedian on Sep 5, 2008 10:29 AM

  • Script for Checking the Server Status

    Hi All,
         I just need the script for monitoring the server status through the WLST.My scenario:I have 2 server in Running State.If any one of the server get failed or in not RUNNING state then i use the script for starting that server automatically.I tried some of the script but it is not working properly .If any one have the sample script please share with me.
    Regards,
    Ove.

    Hi Syed,
    Replication state is very easy to see in 4.x and earlier. The last changenumber in the supplier changelog is visible (on the root DSE IIRC), and each consumer suffix has an operational attribute "copiedfrom" that tells you the name of the supplier, the database generation id, and the last change replayed from the supplier.
    So a script that compares the results of
    ldapsearch -h <supplier> -s base -b "" "objectclass=*" lastchangenumber
    and
    ldapsearch -h <consumer> -s base -b <base_suffix> "objectclass=*" copiedFrom
    will show you if a replica has fallen out of sync. It won't tell you more than how many changes behind the replica is, though, because pre-5.x changenumbers are sequential integers, not timestamps.
    However, the change that corresponds to the changenumber is clearly visible under the "cn=changelog" suffix. So if you look at the change itself you can see the timestamp on it.
    For more info on the status of replication, you should be able to query the agreements on the supplier. Those live under the "Netscape Machine Data Suffix", which you can also find on the supplier's root DSE:
    ldapsearch -h <supplier> -s base -b "" "objectclass=*" netscapemdsuffix
    And of course the error logs will usually tell you if replication is failing outright.
    I may be off on some of the attribute names, but if you do some investigating along these lines, you should be able to figure it out.

  • WLST Script for Disabling/Enabling Global SLA Alerting.

    Hello,
    I wanna find a way from the WLST to disable and enable the SLA Alerting which is under Operations-->Global Settings in the sbconsole. This is the global setting not per sercive!
    I have found how to create a session and how to disable the alerts per service, but i cannot find which MBean is accessed when throught the sbconsole the global SLA alerting is disabled/enabled.
    Can anybody point me to the right direction or help me to find how to do this from WLST.
    Thanks.

    Hi Ganesh,
    I have finally created the script i was looking for.. I copy-paste it below as a sample... For sure you need all the lines of code until the comment i have put "#####you need this code above"
    now the code you see below the comment is for disabling the global sla alerting... you have to write a bit to target a specific service that you want to disable.
    Keep in mind that after you make your change you hava to include those lines in order to activate the changes and disconnect and exit..
    sessionMBean.activateSession(sessionName, "enable SLA")
    disconnect()
    exit()
    If you have access to oracle support search for wlst script for osb it has a lot and you can find how to target a specific service...
    I hope that i help a little bit
    import sys
    import wlstModule
    from com.bea.wli.sb.management.configuration import SessionManagementMBean
    from com.bea.wli.sb.management.configuration import ALSBConfigurationMBean
    #from com.bea.wli.sb.management.configuration import ProxyServiceConfigurationMBean
    from com.bea.wli.sb.management.configuration.operations import OperationsConfigMBean
    from com.bea.wli.config import Ref
    from com.bea.wli.sb.util import Refs
    # Connect (username, password, URL)
    connect('weblogic', 'password', 't3://localhost:7001')
    domainRuntime()
    # Create a session name
    sessionName =sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
    print('... after session. Session is: ', sessionName)
    # Get the session MBean and create a session
    sessionMBean = findService(SessionManagementMBean.NAME,SessionManagementMBean.TYPE)
    print('-debug-this is the sessionbean',sessionMBean)
    print('SessionMBean is: ', sessionMBean)
    sessionMBean.createSession(sessionName)
    print(String('Session was created ... ').concat(sessionName))
    #####you need this code above
    domainCustom()
    cd('com.bea')
    #path='com.bea:Name=OperationsConfig.'+sessionName+',Location=AdminServer,Type=com.bea.wli.sb.management.configuration.operations.OperationsConfigMBean'
    cd('com.bea:Name=OperationsConfig.'+str(sessionName)+',Location=AdminServer,Type=com.bea.wli.sb.management.configuration.operations.OperationsConfigMBean')
    set('DomainSLAAlertingEnabled',java.lang.Boolean("true"))
    # Now commit (activate) the changes
    sessionMBean.activateSession(sessionName, "enable SLA")
    disconnect()
    exit()

Maybe you are looking for