Odd terminal-gui error messages on intel that disappear with reboot
Occasionally I get error messages of the following form when running something from the command line that interacts with the GUI:
<pre>
zsh-% mate aliases
sysctlbynamewithpid: sysctl failed:Operation not permitted
ispidnative: sysctlbynamewithpid failed:Operation not permitted
sysctlbynamewithpid: sysctl failed:Operation not permitted
ispidnative: sysctlbynamewithpid failed:Operation not permitted
zsh-% gdirs
sysctlbynamewithpid: sysctl failed:Operation not permitted
ispidnative: sysctlbynamewithpid failed:Operation not permitted
sysctlbynamewithpid: sysctl failed:Operation not permitted
ispidnative: sysctlbynamewithpid failed:Operation not permitted
</pre>
This appears to be harmless (what I am doing still works), and disappears upon reboot, but it seems to indicate some kernel communication problem.
(The first of these is TextMate's command line utility, and the second is a gui that displays directories in a stack that Wataru and I made with Pashua, so I doubt it is specific to any particular app. Both are universal binaries.)
Any idea what is going on?
?
Programmatically Detecting a Translated Application
Similar Messages
-
Hi All,
I have Citrix VDI (Virtual Desktop Infrastructure) Implemented
in my company and installed few Applications on App Server lets say.... MS Office 2013, filzialla, putty, etc...
I assigned these apps to the users through CITRIX STUDIO, when I try to use these apps. on VDI everything is working fine only when i tried to open Word, Excel or Powerpoing, outlook it throws error as
""This copy of Microsoft Office 2013 cannot be used on a computer running Terminal Services" error message when you try to open the Click-to-Run version of an Office 2013 program or suite on
a terminal server"" and apps gets closed.
Please help me on this ASAP.
Thanks & Regards,
Sachin ShindeHi,
As mentioned in ths article below, run for Office 365 products on to a Remote Desktop Session Host server is not supported. You can install Office products for Office 365 to a virtual desktop, but the virtual desktop must be assigned to a single user.
http://technet.microsoft.com/en-us/library/jj219423(v=office.15).aspx
Regards,
Melon Chen
TechNet Community Support -
I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W. -
I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me
Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over. -
when i open my i3tunes on my computer i get an error message telling me that iTunes has stopped working..the message is as follows...Microsoft Visual C runtime library Program C:\program files (86) iTunes\iTunes.exe R6025 -Pure virtual function call.. How do i fix this
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Can anyone shed some light on this error message I am getting upon closing Photoshop CC
I am getting an error message on screen that read's "Selective Palette error: no element found at line 1. Are you able to assist with this problem?Same issue here in WI and for me it was at 6:36p CST.
I'm changed my password, removed iCloud from my phone ... tried 3G and WIFI with no luck. I also cannot check it on my Mac or iPad. I was able to get contacts and calenders back on my phone but no mail yet.
Did the whole Apple support thing and apparently I'm part of the 1%
EDIT: Question: are all of you former MobileMe users as well? Just wondering because I know there were going to be some changes as they completely move MobileMe over to iCloud and drop the "extra" services. I just can't remember if it was just a single cut off date or a series of dates. THAT email is stuck in my iCloud folders. -
I did a system restore, trying to get rid of the new update (which I HATE), and now when I try to open iTunes, I get an error message telling me that "This version of iTunes has not been correctly localized for this language. Please run the English version." You can't change the language option unless you can open iTunes - and IT WON'T OPEN!!! What a piece of crap! If there existed an iTunes substitute, I would purchase it in a hot minute!
Strip it out and start again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you really want to roll back to 11.4 uninstall all iTunes/Apple components as described in the second box, restore the pre-upgrade version of the library as described in Empty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2 -
When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid?
Temporarily disable any security software on the computer and try again.
-
Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?
Every time I click on something in GarageBand and error message pops up that says "Error code 25974 was returned by the Audio driver." How do I fix this problem?
-
I'am getting an update error when am trying to upgrade to newer version (4.3.2)..the error message content shows that i tunes could not back up the i pod,because the back up was corrupt or not compatible with ipod..can anyone help me out to fix this issue
Hi,
Try here: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird--- -
i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks
i have reset the ipad and restored it to no avail
-
I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud option in Acrobat. Kindly help me to sortout this problems?
So I tried generating the same PDFs on two other computers that have Acrobat 9 Pro. Results were reproduced. The verdict is:
- complex PDF files (that is, containing cross-references, tables of contents, and bookmarks) generated by Acrobat 9.x Pro are roughly 2-5x larger than the identical file generated with Acrobat 8.x Pro.
- different PDF conversion settings make a negligable difference (less than 10% rather than 70-80%).
- using the "Reduce File Size" or "Optimize PDF" option cuts the file size roughly in half, almost always resulting in a "image downsampling mask" warning message, which requires acknowledgement (that is a problem for batch processing or automation).
- adding an Acrobat watermark to the file cuts the file size roughly in half.
- just using Save As to another filename has no effect on file size.
- generating the PDF in Acrobat 9 with links but no PDF bookmarks still results in the inflated file size.
- generating the PDF in Acrobat 9 without any links or bookmarks results in approximately the same file size as the Acrobat 8 PDF with full links and bookmarks.
It appears that Acrobat 9's manner of adding links is what's bloating the files, and in my case it's probably not related to images or image resolution/print quality. It's a shame, because Acrobat 9 seems to have made some improvements to the Review Tracker interface, and a few other bells and whistles which I haven't really gotten around to exporing yet. But unless I find a way to keep my links and the PDF file sizes comparable to what I was getting with Acrobat 8 Pro, it looks like I'm going to stay with Acrobat 8. -
My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?
Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this. -
How do I resolve an error message 150:30 that will not allow me to open photoshop?
How do I resolve an error message 150:30 that will not allow me to open photoshop?
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
Maybe you are looking for
-
Creative suite web standard and vista 32 bit
Since purchasing a new computer with Vista my old web software which ran fine on XP is now obsolete and I need to purchase new. What is the lowest version of the Adobe Creative Suite Web Standard that will work on Vista Home Basic SP1 with media 32 E
-
I've just installed the MS-8348 CD-RW, and the bundled Nero Burning ROM, and am experiencing problems. The problem occurs when I try to write more than approx 400 mb on a cd-r. Whether I make a audio cd or data cd of anything more than appx 400mb, I
-
'Java Script Application' box pops up every time double click on FF6.0 icon.
1)In the box: "TypeError.Components.classes [cid] is undefined", appears. There is a yellow triangle w/! mark. Below that is small box with "OK" inside. I click it and FF opens. 2)FF 6 seems to be running slower than usual. Almost as if each update e
-
Fpga IO module clock with TRIG
Hi, I'm working with the "IO module clock 0" at 100MHz. My problem is when I'm compiling, I get Error Place905. I found out that it's because I'm using a PXI trigger inside the timed loop. Is there a solution to use triggers with this clock? I joine
-
IF RIO ressource system control
Hi, The IF RIO ressource control is a typedef. I want to use a control with a system style or like the XP style. I find for the visa ressource but not for the IF-RIO. Where I can find, or how I can make a other control for my IF-RIO ressource. Thank