I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i have reset the ipad and restored it to no avail

Similar Messages

The Download Assistant said that there wasn't enough disk space for me to download. What do I do?

The Download Assistant said that there wasn't enough disk space for me to download. What do I do?

Which operating system are you using? Where did you choose to download the install files too?

Archive and Install problem (not enough disc space for another install)

Alright, so I've got the blue screen. I tried getting rid of the APE stuff, and they were all successfully deleted, but it's still the blue screen. So I'm going to do the Archive/Install thing. My problem is that if I try to do an Archive and Install, I won't have enough space to do it. I have around 3.5 GB right now, but that's probably not enough to do another install.
My only option I think is to go into single-user mode and manually remove my larger files. I have a back-up drive, and I tried removing all the stuff that's on the back-up drive from my computer, but all of them are listed as read-only.
So is there a way to override permissions in the UNIX thing? Or is there another option for me with?
Also I don't know if this matters, but I'm installing it from an external DVD drive and I'm doing it from PANTHER and not Tiger.
Message was edited by: JollyWaffle

...anyone? I left the blue screen on overnight but it didn't do anything.

"Safari could not download the file because there is not enough disc space"

"Safari could not download the file because there is not enough disc space"
I have 60gb available on my MBA and I have "read and write" privileges for the download folder. This error seemingly came out of nowhere. It doesn't matter if the file is 1gb or 10mb, I'll get the error. All I have to do is remove the .download extension and I can use the file which is complete despite the error.
This is really annoying so any help would be appreciated.

I never used to have a problem with creating a new folder and moving the download into it
But you'll have a problem if you do it now.

"Not enough disc space" when exporting

Hello all -
I am running iPhoto 2.0.1 with OX 10.3.9. My hard disc has 40GB.
Every once in a while, when I try to export a large number of photos into a desktop folder or as a slide show to QuickTime, I will get an error message saying, in effect, that there is not enough disc space to complete the export. My hard disc at those times has anywhere from 7 to 9 GB of free space. Quitting and restarting iPhoto has no effect. Neither does restarting the computer. Often times editing a photo in Photoshop Elements which then puts the edited picture back into iPhoto fixes the problem - but not always.
More often than not, the export works fine. But these "error" situations keep occurring every now and then.
Any thoughts?
Thanks in advance for your replies -
- OF

anybody?

Error: not enough disc space?

I am trying to export my first project. Even though I have 133G left on my external hard drive I get the (not enough disc space) error. My project is 87 minutes long. Since my external drive has more than enough room, I guess the program is only recognizing my internal drive (which only has 4 gigs left). I have been opening the project and editing it through the external hard drive for quite some time now, so I am a bit confused and frustrated. My capture scratch discs are set to the external drive. I have been trying to figure something out with the media manager, but to be honest, that thing scares the **** out of me. I use FCP 5.0 on a G5 dual 1.8. Using NTSC DVCAM 48K. Is there something I'm missing about using the external drive? Any help would be appreciated!

disk formatting is handled by the Disk Utility application in the /Applications/Utilities folder.
reformatting your disc will ERASE ALL the contained data
... and you DONT want to format as FAT32, rather the opposite. the advice was to check that your disc is formatted as Mac OS Extended, and if not, to format it as such. you can check this by selecting the G-RAID's disc icon in the finder and pressing Cmd-I to open the info window.
Look down to Format, just above Capacity, in the General properties.
no doubt you will receive extra advice to ensure that the drive is not "Journaled" but this is not a big deal

Not enough disk space for asset ecoding

Hi all,
I have a dvdsp project with:
a feature: 3.3 gb
dvd extra: 289
menu assets: 65mb
and shows that it is 3.8 mb all together, but when i try to build/format it stops the build at the menu and gives the error message: Not enough disk space for asset encoding. I was running a test build when this happened. i have yet to add the audio for the extra thinking i still had some room on here to work with.
I have burned dvd's up 4.5 without any issues. any ideas why this is happening?
thanks,
Mark

I'm having the same problem. Except I have tried to switch locations for the Current Build and each time it says Not enough disk space for asset encoding. I have a 500GB raid with almost 400GB free and then another 500GB raid with about 130GB free. I really need help on this pronto!
Another message it now brings up after it starts Encoding Assets: Insufficient disk space for encoding. Please free up disk space on your encoding target drive. Please Help!!
Message was edited by: PapaSnowSmurf

"not enough disk space for asset encoding" error message

I'm using DVD SP 4.2.1 and trying to burn a DL DVD. Every time I try to build the TS folders somewhere, I get the "not enough disk space for asset encoding" message. I have PLENTY of space (over 100GB) where I'm assigning it to create the TS folders. I don't understand why I'm getting the message. Your help is appreciated.

Max,
I think you're onto something here. I noticed that the original disk (an old Iomega Peerless 20GB removable hard drive) was nearly full. I also saved the DVD Studio Pro file for the project to the same drive. I think that, somehow, the application looked to that drive to do something and got a "disk full" message from that disk and gave me the error.
The workaround was to transfer all the assets AND the project file to another hard disk with plenty of space (over 100 GB). The settings for the DVD Studio Pro encoding process remained the same…my computer's internal hard disk with its 30 GB of free space. I re-linked the assets and the disk building and encoding process went smoothly and I'm now the proud owner of a finished DVD.
There's probably something lurking in the background here, but this worked for me.
Thanks for making the suggestion to look deeper! My problem is solved!
Kevin

Im try to import a large amount of pictures to Iphoto. I have pleant of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

Im trying to import a large amount of pictures to Iphoto. I have pleanty of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

I. I want to import 58.64 GB of Photos from an external HD
2. I have 278.28 GB space left on my HD
3. The exact error message goes like this......
Insufficient Disk Space
iPhoto cannot import your photos because
there is not enough free space on the
volume containing your iPhoto library
I Have researched this and most advice is to empty the iPhoto trash. I have already done this and it did not help.
Thank you for helping

Code:25 Not enough disc space Help!!!!!

Hi there,
Can someone help me before I smash my PC up!
Adobe you need to sort issues out with your products before you put your sofware on the market!
For the last four days I have been trying to create a Blue Ray disc, which has been sent from Premiere CS5.2 to Encore via dynamic link.
The project is 2hrs 36mins in length.Transcode settings are set at Transcode Default Settings. Dimenions of project are 1440x1080, Frame Rate 25.
I have 398Gb free space on my drive and 2Gb free space on disc.
Start to bulid the project in Encore, this takes another 10hrs to transcode, then it attempts to write onto disc then I get "CODE 25" Error not enough disc space?????? What the **** is this ?
I have gone through the forums on here which have mentioned deleting the session files, done all this and still no luck.
I would appreciate it if anyone has managed to solve this problem and pass their findings on to me.
Thank you
Wayne

Hi Guys,
I have finally managed to burn the project onto Blu-Ray but I have a slight issue with the Audio being slightly distorted. What would be the best settings for the audio?
This is what I did to get it onto disc:
Exported my project from Premiere CS5.2 through AME then imported into Encore 5.1. I did change the Administrator settings as advised and it looks like this did the trick.
My Encore Project Settings were set at: Codec H.264, Dimensions 1440X1080, Frame Rate 25, Upper Field First.
Export Settings from Premiere were set at:
Video
T.V Standard: Automatic (based on source) (PAL)
Frame Dimensions: 1440x1080
Frame Rate: Automatic
Field Order: Automatic
Pixel Aspect Ratio: Automatic
Profile: Main
Level: 4.1
Bitrate Settings
Bitrate Encoding: VBR, 1 Pass
Bitrate Lever: High
Target Bitrate: 18.75
Maximum Bitrate 22.5
Audio
Codec: Dolby Digital
Audio Layer: Dolby Digital Stereo
Frequency: 48 KHz
Bitrate Settings
Bitrate (kbps) 192
Do I need to up the audio bitrate for better sound as I'm getting distortion. If so what is the best setting for this?
Thank you all for your help
Wayne

Main Menu:Not enough disk space for asset encoding

i tried to burn my project first i got an error that in track 1 i've got no assets/videos and i added an asset, then a problem with the story and dragged the same story in both columns.. now i tried to burn again and got this error
Main Menu:Not enough disk space for asset encoding
Build cancelled
Building was not successful. See log.
any help appreciated. Thanks in advance

Sounds like your hard drive is getting full. You need as much space on your drive as you can get - at least as much as the disc contents, twice. If you are burning a DVD-R at 4.7Gb then allow ten Gb free space before you start.

Try to burn Blu Ray. It says: Not enough disc space

Hi everybody,
I try to burn a blu ray disc. My Blu Ray Writer is: HL-DT-ST BD-RE BH10LS30
I use 25GB BD-R Discs from Verbatim.
If I try to burn a 20GB *.iso file, every tool I tried says immediately: There is not enough disc space. What is wrong?
Even if I try to burn smaller files to Blu Ray, it always says: There is not enough disc space.
I'm confused
Regards
Maik from Germany

The 'There is not enough disc space' message appears immediately. It doesn't matter if the output file is 500MB or 20GB.
I tried different BD-R discs. It is always the same message.
I found a similar case:
I am trying to burn a blu-ray disc but having problems.
Do I really have to buy a 90$ tool so I can write my movie on BD-R?

My computer is running SO slow. The intermet also keeps freezing up and I have to turn airport off then back on/refresh before it will work again. I dont have enough space on my start up disc to run certain programs. Easiest way to fix?

My computer is running SO slow. The intermet also keeps freezing up and I have to turn airport off then back on/refresh before it will work again. I dont have enough space on my start up disc to run certain programs. It will say I need to quit programsin order for things to run. Easiest way to fix? Im not great with computers!
Running mac os x version 10.6.8

Easiest way is to have an external drive to which you copy the things you store like pictures, movies, and music
which take up a lot of space. Then delete them fron the main drive and clean it up with one of the maintenance utilities. You can readily access the external drive's contents whenever you wish.
http://lifehacker.com/5814440/what-kind-of-maintenance-do-i-need-to-do-on-my-mac
http://mac360.com/2008/07/the_top_7_free_utilities_to_maintain_a_mac/

After a system restore, I get an error message telling me that "This version of iTunes has not been correctly localized for this language. Please run the English version." the E

I did a system restore, trying to get rid of the new update (which I HATE), and now when I try to open iTunes, I get an error message telling me that "This version of iTunes has not been correctly localized for this language. Please run the English version." You can't change the language option unless you can open iTunes - and IT WON'T OPEN!!! What a piece of crap! If there existed an iTunes substitute, I would purchase it in a hot minute!

Strip it out and start again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you really want to roll back to 11.4 uninstall all iTunes/Apple components as described in the second box, restore the pre-upgrade version of the library as described in Empty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
tt2

There is no on/off option for automatic dim on my 8100 any ideas?

There is no on/off option for automatic dim on my 8100 any ideas?
It is effecting the white balance of the camera
and I cannot take a decent pic.
I have tried battery restore, by removing the battery whilst on
and rebooting without success.
Thanks

Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
To change the card, go to your account settings and change the information to your new card, and hit save.

I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

Similar Messages

Maybe you are looking for