Oddt Table and it's key on Ocrd Table

There is field at Ocrd Table that called
DdtKey and it necessary to be a Primary Key of Oddt Table
But in actual the Field contains only -1
Although the it connect to oDDT
So I don't Have any way approach to DeductionTaxHierarchies Object
By the GetByKey() Method
Can someone help me?
Thanks anyway

They are not one to one relationship. ODDT needs two fields for its key. The DdtKey field in OCRD will only have value if the default has been set for Current Deduction Hierarchy.
Thanks,
Gordon

Similar Messages

Creating a master table and using it to populate other tables.

Hi everyone.
I am a novice at using Numbers and I need some direction.
I am looking to create a master table with information for our summer camp. This table will include vital information such as name, address, etc. along with cabin assignments, tuitions received, and more.
We will separate this information into smaller tables that different portions of that master table for specific use. Such as: names and addresses for leaders, names and tuitions for registration, etc.
My goal is to type the information into the master table and have it update the other tables automatically. Can someone direct me how to format the master and sub tables so that this is possible?
I would greatly appreciate it and it will greatly reduce the record-keeping time for our camp.
Thank You!
Roy

Hi Roy,
Welcome to the Numbers discussions. You are giving us a tall order, especially when we don't know your level of experience in programming spreadsheets.
Here are a couple of basics to start the conversation...
In normal spreadsheet programming, we Pull data from one location into another, we don't Push it or Send it. This should help you to understand that the hard work is done in the sub tables, not the master.
You will use LOOKUP functions to pull the data to your sub tables. Download the Numbers User Guide and the Formulas and Functions User Guide and read up on them.
In your master table, make sure you have one column that uniquely identifies each participant so it will be easy to reference that person in your sub tables.
Regards,
Jerry

Why there is a huge difference between a row size on a disk based table and a row size in memoptimized table of SQL 2014?

Hi All,
I have two table with similar structure and data, one is on disk and the other is in memory. I somehow calculated the difference between a row size of on disk and in memory table and found that the row size of in memory is 700 Bytes more than the disk based
tables.
aa

As others mentioned, memory optimized tables and disk based tables have different structures in SQL Server 2014.
For memory optimized tables, the number of indexes on table also contribute to the size. You can calculate the exact size of rows and thus the table size using the formula given in the below articles
Table and Row Size in Memory-Optimized Tables
Estimate the Size of a Table
Krishnakumar S

Dynamic Column Names from one table and its corresponding values from another table

I have 2 tables. First tables gives the specification if a column is required or not. we have the 2nd table with the same column name where we provide the actual values.
I want to select all the required columns from the 1st table and retrieve the values for those from the 2nd table. Both this i want to achieve in a single select statement.

This wil require a dynamic Query with a Pivot
DECLARE @ColsPivot as VARCHAR(MAX);
DECLARE @Query AS VARCHAR(MAX);
1. Retreive the ID for all required field
SET @ColsPivot = (SELECT STUFF((SELECT ',' + quotename(CAST([RequirementID] as varchar(3))) FROM [dbo].[Requirement] WHERE required=1 FOR XML PATH(''), TYPE).value('.', 'NVARCHAR(MAX)') ,1,1,''));
This will give you : [1],[2],[3],[8],[9],[14] for exemple.
2. Build your Query
SET @Query ='SELECT ClientID,'+@ColsPivot+''
   FROM (
       SELECT [ClientID],[RequirementID],[Value]
       FROM dbo.RequirementValue
       WHERE ClientID=@CliendID --Optional SP parameter
   )src
         PIVOT(
           MAX(Value)
           for [RequirementID] in ('+@ColsPivot+')
   ) p';
3. Exec(@Query);

Complicated Question (see pdf): Use data from one table to find the same data in a second table and take other data from that table and place it in a third table. :)

I don't even know if this is posible.
I'm using iwork '09
View PDF

I hope I can clarify:
For our purposes here:
Table 1 = "Step 2 - Product Sizes"
Table 2 = "Option id Master"
Table 3 = "Export - Product Info"
Table 1:
The user would enter values for "productcode," "Horz," and "Vert"
"Size" would auto fill based on values in Horiz and Vert (I have this taken care of already).
Table 2: This is a completely static table that I want to search against. - Data from other tables in the doc does not alter or change the data in this doc.
We just want to look at table 2. Find the existing value in "table 2 : size" column that matches the "table 1 : size" column and then pull the "optionids" and "productprice" from that row.
Can the value from "Table 1 : Size" be used as a search term in "Table 2 : Size?"
Table 3: The user does not enter any values on this table.
"productcode" is pulled from table 1 - "Table 1 :: A5" = "Table 3 :: A5"
"optionids" and "productprice" are pulled from Table 2 columns "D" and "E" - however we do not know which Table 2 row it is pulling from until we enter data in Table 1.
As I'm writing this I'm realizing that
A. this is probably really confusing to you.
B. this may be impossible inside of numbers.
If you have some other method that would facilitate the same out come but be structured differently please let me know.
--- maybe to help you understand further what I am doing here is my current workflow:
I record the size of a piece of art.
Then I manually go to my "Option id Master" and find the same size.
I then copy the corresponding "optionids" and "productprice" cells. (these options control the prices displayed on my website)
I got to my "Export - Product Info" table and paste the values in the corresponding cells.
I was hoping to automate this as it takes a long time when you have hundreds of products.
Thanks for the help!

Structure of table and work area are not compatible - table control wizard

Structure of table and work area are not compatible is the error i am getting when specifying my internal table and work area in my table control? What am I doing wrong?

hii
this error comes when you have different structure of work area then internal table..so work area will not work here and you will not be able to append records in internal table.
check strucure of internal table and work area.it should be like below.
TYPES:
BEGIN OF type_s_kna1,
     kunnr LIKE kna1-kunnr,            " Customer Number
     name1 LIKE kna1-name1,            " Name
     vbeln LIKE vbap-vbeln,            " Sales Document
END OF type_s_kna1.
* Internal Table And Work Area Declarations For Customer Details      *
DATA : t_kna1 TYPE STANDARD TABLE OF type_s_kna1,
         fs_kna1 TYPE type_s_kna1.
regards
twinkal

Getting Data from 2 different table and saving it in the third table

Hi,
My question is i have 2 different table where the data is stored. And Nothing is at Level0 and i don't need it.
Table A will be at Level1, this is a scroll and depending on this value the level2 grid will be populated with the values.
Say for example Table A is groups; data e.g., Cars, MotorBike etc
Table B will have the data for Group Cars: Holden, Toyota, Honda etc., MotorBike: Honda, Suzuki, Yamaha etc.,
Now lets say there are 3 divisions in the company AA , BB
Division AA has been allocated group Cars only
Division BB has been Allocated Both Cars and MotorBikes.
To do this i have used a query view where depending on the Division i choose the group and then i get the required fileds.
Now my Problem is that i need to save this data in table C but on the ad-hoc basis can't write a query with in the code to do that.
tried using work record on the scroll but i cant do that as well. Any Suggestions?
One more thing when the Page open this data should be pre-populated on the page depending on the division, the user will not be able to select anything from the prompt.
Edited by: 952330 on Aug 12, 2012 8:32 PM

I hope I can clarify:
For our purposes here:
Table 1 = "Step 2 - Product Sizes"
Table 2 = "Option id Master"
Table 3 = "Export - Product Info"
Table 1:
The user would enter values for "productcode," "Horz," and "Vert"
"Size" would auto fill based on values in Horiz and Vert (I have this taken care of already).
Table 2: This is a completely static table that I want to search against. - Data from other tables in the doc does not alter or change the data in this doc.
We just want to look at table 2. Find the existing value in "table 2 : size" column that matches the "table 1 : size" column and then pull the "optionids" and "productprice" from that row.
Can the value from "Table 1 : Size" be used as a search term in "Table 2 : Size?"
Table 3: The user does not enter any values on this table.
"productcode" is pulled from table 1 - "Table 1 :: A5" = "Table 3 :: A5"
"optionids" and "productprice" are pulled from Table 2 columns "D" and "E" - however we do not know which Table 2 row it is pulling from until we enter data in Table 1.
As I'm writing this I'm realizing that
A. this is probably really confusing to you.
B. this may be impossible inside of numbers.
If you have some other method that would facilitate the same out come but be structured differently please let me know.
--- maybe to help you understand further what I am doing here is my current workflow:
I record the size of a piece of art.
Then I manually go to my "Option id Master" and find the same size.
I then copy the corresponding "optionids" and "productprice" cells. (these options control the prices displayed on my website)
I got to my "Export - Product Info" table and paste the values in the corresponding cells.
I was hoping to automate this as it takes a long time when you have hundreds of products.
Thanks for the help!

Compare 2 tables and insert rows missing in each table.

I have a tough situation. I have two exact tables- one online and one offline database. I know that there are missing rows of data from each table, so I need to make a comparison of one table and insert rows that do not exist. I was thinking to try this, but it took over 3 hours to run and did not return anything:
insert into t
select * from t a
where not exists (select * from [email protected] b
where a.col1 != b.col1
and a.col2 != b.col2
and a.col3 != b.col3);
and it goes on for another 7columns.
The trouble I have is to include a date clause so that the query can be broken down into running only a few months of data comparisions at a time- the records go back 4 years to compare. Also is there a way to write this so that it will query both tables at the same time in order to speed things up- or is one table at a time the best advice? Each table has over 100 million records to compare, that's why I was hoping to use a date criteria since one column is date.
Let me know what you advise to make this work, I hope I was on the right track.

Not sure if the MINUS operator will perform better with your data set but;
SQL> create table t1 (some_id number, some_date date)
Table created.
SQL> create table t2 (some_id number, some_date date)
Table created.
SQL> insert into t1 values (1, trunc(sysdate))
1 row created.
SQL> insert into t1 values (2, trunc(sysdate-5))
1 row created.
SQL> insert into t1 values (4, trunc(sysdate-90))
1 row created.
SQL> insert into t2 values (1, trunc(sysdate))
1 row created.
SQL> insert into t2 values (3, trunc(sysdate-10))
1 row created.
SQL> insert into t2 values (5, trunc(sysdate-100))
1 row created.
SQL> select * from t1
   SOME_ID SOME_DAT
         1 07-07-30
         2 07-07-25
         4 07-05-01
3 rows selected.
SQL> select * from t2
   SOME_ID SOME_DAT
         1 07-07-30
         3 07-07-20
         5 07-04-21
3 rows selected.
SQL> insert into t1 (
   select some_id, some_date from t2 where some_date between sysdate-50 and sysdate
   minus
   select some_id, some_date from t1 where some_date between sysdate-50 and sysdate)
1 row created.
SQL> insert into t2 (
   select some_id, some_date from t1 where some_date between sysdate-50 and sysdate
   minus
   select some_id, some_date from t2 where some_date between sysdate-50 and sysdate)
1 row created.
SQL> select * from t1
   SOME_ID SOME_DAT
         1 07-07-30
         2 07-07-25
         4 07-05-01
         3 07-07-20
4 rows selected.
SQL> select * from t2
   SOME_ID SOME_DAT
         1 07-07-30
         3 07-07-20
         5 07-04-21
         2 07-07-25
4 rows selected.

Dimension build using SQL table and process to fill the SQL table

I have a dimension in a cube that is manually* built by one of our power users. Now I have to get all the member information of that dimension into a SQL table(example : with columns...level0,level0property,level1,level1property etc....) to use that table in STUDIO for member load.
Is there any easy process to do this? Currently I am building each and every row manually in that SQL table and there are 1100+ members in that manually built dimension. Please advice.

Thank you so much Glenn!! That worked!! You make our lives so much easier!!

I have a custom table and i have to update the table every 4 to 5 min ,

Hi All,
I have custom table and i have to update every 4 to 5min through custom program , could pls suggest the various ways to do that.
Regards
subba

Hi Subbu,
Schedule the program as a background job in transaction SM36 ---> Define Background Job
In SM36 you can find push button Start condition in that u have Date/Time Push button click on it. Specify the date and time when you want to schedule the program to run.
Now below you can find a push button Period values click on it here you get another pop up Period values.
As you want to schedule for every 3 to 4 minutes click on Other period push button.
Here you get another pop up Explicit period values now specify the time minutes field as per your requirment and click on OK.
Best regards,
raam

Generate xml from a table and insert the xml into another table

I want to generate an xml file from a table and insert it into another table all in one tsql
insert into table B(xmlfile)
select * from tableA
FOR
XML
PATH('ac'),TYPE,ELEMENTS
XSINIL,ROOT('Accum')
Is not working any help

I have solved my issue all I did was to change my column datatype to xml

How to read tables and fields transaction,how to find table from a strucre

hi all,
i am having problem in reading tables and fields for developing a customised report. can anybady help me how to extract tabele and fields from a transaction code and how to map table from a structure.
It will me much help full, if u had any documentation. u should be appreciated.
Thanking u
kiran
Message was edited by:
kiran

Hi Kiran,
You can make use of the tables or Views available.
Reward If Useful.
Regards,
Chitra

Table with n foreign key vs n tables or n foreign key vs 1 table?

Hi,
we have a scenario with n tables containing some attributes one table for one category of attribute (es: color, role, type, etc..) of a principal entity and 1 table for the principal entity with n foreign keys vs every attribute table.
Some propose to create a unique table called attributes in which put every attribute with an attributetype for each record.
My question is: the principal entity will have n foreign keys vs the same attribute table. Is this perfomant? which is the best solution?
Thanks in advance.
v.

>
we have a scenario with n tables containing some attributes one table for one category of attribute (es: color, role, type, etc..) of a principal entity and 1 table for the principal entity with n foreign keys vs every attribute table.
Some propose to create a unique table called attributes in which put every attribute with an attributetype for each record.
My question is: the principal entity will have n foreign keys vs the same attribute table. Is this perfomant? which is the best solution?
>
Ask those 'Some propose' how a foreign key to the 'same attribute table' will prevent the WRONG value from being used for a column.
1. Principal entity has a column for 'color' and a column for 'role'.
2. There are FKs on the 'color' column and the 'role' column that both point to the 'same attribute table'
3. Legal values for 'color' are: 1, 2, 3
4. Legal values for 'role' are: 10, 20, 30
What prevents someone from updating the 'color' column to a value of 20?
Ask those 'Some propose' how your one attribute table will store attributes that are of different datatypes.
1. 'color' uses numbers: 1, 2, 3
2. 'type' uses strings: 'type1', 'type2', 'type3'
3. 'holiday' uses dates: 12/25/2013, 01/01/2014
How do your 'Some propse' plan to store ALL of those values in one column? They are likely to say they will use VARCHAR2.
Ok - so how do you keep someone from updating 'holiday' to a value of 'type2' or a value of '3'?
You can't easily validate the data to begin with and you can't easily prevent 'dirty' data from getting into the system.
You also can't easily explain to ANYONE, for example new developers, how to properly use and maintain the table.
I haven't heard you mention even ONE potential benefit to doing things the way that 'Some propose'. So - DON'T DO THAT!

Linking multiple tables in numbers, how can I sort one table and this follow through on subsequent tables in the document?

I am a teacher setting up a tracking system using Numbers for the first time. I have set up a summary sheet with puil information, some of which is "looked up" from other tables within the document. It is working brilliantly until we regrouped the pupils.
When i reorganise the students on the summary page I want the same order to follow on all subsequent tables.
However the pupil lists on all subsequent pages stay in the original order!
Hope this makes some kind of sense as I am about to throw macbook out of the window!
DAve

davidmilce wrote:
I want all of the tick boxes in each row to move with the pupil name when they are reorganised (ie the unique data in each row stays with the pupi no matter where they go when sorted.
Thanks again
Dave
Dave,
I might use Match, Offset and Column in my expressions. There are many approaches to this
Match will tell you which row your person's data is in, and OFFSET will then take you to the row indicated by Match and the column indicated by COLUMN().
Let's say you want to access the data for Pupil A. Further assume that the string "Pupil A" is the content of Column A, essentially the title of the record.
MATCH(A, AF1 :: Table 1 :: A) will return the number of the Row in the source table where Pupil A is found.
INDEX(Main, MATCH($A, Main :: $A), COLUMN()) will get the content, in your case the checkbox status.
You are done if you are happy with displaying "TRUE" or "FALSE"
But if you want, you can substitute graphics, like this:
=IF(INDEX(Main, MATCH($A, Main :: $A), COLUMN()), "☑", "☐")
Regards,
Jerry

Possible bug? Nested tables and quantity fields in the nested table.

Hey guys,
I have witnessed a weird bug, maybe someone can clarify this for me.
1. Create a nested table. The inner table contains a quantity field of type DZIEME (FROM VBAP-ZIEME).
2. Create your interface and just put this table in the import section. Try to activate. It will work.
3. Create an adobe form for it and a program and execute it. You'll get a short dump saying that VBAP-ZIEME is unknown and that there are errors in the dynamically generated function.
Second test.
1. Create a nested table. The outer table contains a quantity field of type DZIEME (FROM VBAP-ZIEME).
2. Create your interface and just put this table in the import section. Try to activate. It will NOT work.
You have to make the addition of the quantity fields in Currency/Quantity Fields.
From this I see that the checker, doesn't look into nested tables for quantity/currency fields and just activates the interface.
Third test
1. Create a nested table. The inner table contains a quantity field of type DZIEME (FROM VBAP-ZIEME).
2. Create your interface:
2.a. Put this table in the import section.
2.b. Declare the nested Quantity field in the Currency/Quantity Fields section, using the autofiller (the buttons to the right of the field)
2.c Try to activate. It will work.
3. Create an adobe form for it and a program and execute it. You'll get a short dump which for some reason has no info.
From this, I understand that the Currency/Quantity Fields section may not declare the quantity fields, from nested tables, correctly.
What do you guys think? What am I doing wrong?
Thanks,

@Anne Kathrine P...
By nested tables I mean creating table types, in the dictionary (se11) then in the interface>Import section adding a parameter X TYPE B_T.
i.e.
Structure A
Table type of structure A, A_T
Structure B containing a field of table type A
Table type B of structure B, B_T.
The issue can be easily solved for Z tables by changing the component type from quantity to decimal type.

Oddt Table and it's key on Ocrd Table

Similar Messages

Maybe you are looking for