ODI 11g 1.1.1.7: Studio doesn't start since install of Java 7

Hi,
as many other users I happened an uncomfortable surprise after having naively installed Java 7 on my Win 7 notebook. The Java 6 install was removed and ODI Studio didn't start anymore.
I found out that Java 7 is not supported with ODI 11g and
re-installed Java 6 (jdk1.6.0_45)
set the JAVA_HOME variable to this JDK directory
tried to start on the command line "odi.exe -jreLoc C:\Prog\Java\jdk1.6.0_45"
I de-installed and re-installed ODI 1.1.1.7 completely
but nothing helped. When pressing the icon or starting from the command line: no event, no error message, anything.
I have no idea how to debug this. With most other Oracle products the appropriate JVM cames along with the product installation. But ODI depends from the external Java install.
How to proceed now? As far as I know it's allowed that both Java versions coexist on one machine. But what's missing to point ODI to the 6 env?
Any idea appreciated!!
Best regards
Thomas

What path is set in ODI.CONF file ?
Check it and modify if required.
Bhabani
http://dwteam.in

Similar Messages

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

HTTP Server Doesn't Start after install

I just completed an install of the 10.1.3.1 Oracle App Server. It indicated that the install was successful. I can see in the log the BPEL Manager deploying in the default domain, but I do not see any reference to the HTTP server. Also, when I do a *./opmnctl startall* there is no HTTP_Server~1.log created.
Is there a step I need to complete to enable the Apache server to start? I must be missing something - the Apache folder is there in the install folder.
The *./opmnctl status* reports:
Processes in Instance: AS02.ssg-st-bpel-build0-dev.vzbi.com
---------------------------------+--------------------+---------+---------
ias-component                    | process-type       |     pid | status
---------------------------------+--------------------+---------+---------
OC4JGroup:default_group          | OC4J:home          |   18970 | Alive
ASG                              | ASG                |     N/A | DownI found the following in the installActions log:
Install type for "Oracle HTTP Server 10.1.3.0.0 " is "Typical".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.bc4j.oem 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.soap.srv 2.2.0.0.2a.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ejb 9.0.1.0.1.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.apache.ojsp 10.1.2.0.0.
     Conflict while setting install type of "Oracle Process Management Notification 10.1.3.1.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.dcm 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.sysman.emd 10.0.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.java.j2ee.iascfg 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.logloader 10.1.2.0.0.
# Not all the dependencies for the component Oracle HTTP Server 10.1.3.0.0 could be found. Missing component oracle.webdb.monitor 10.1.2.0.0.
What am I missing? Is there a package I need to install before installing the App Server?
Edited by: BCurtis on Sep 24, 2010 3:22 PM
Edited by: BCurtis on Sep 24, 2010 3:25 PM

I now know I'm missing the <ias-component id="HTTP_Server"> in the opmn.xml file. The following is from an older install of a few years ago.
         <ias-component id="HTTP_Server">
            <process-type id="HTTP_Server" module-id="OHS">
               <module-data>
                  <category id="start-parameters">
                     <data id="start-mode" value="ssl-enabled"/>
                  </category>
               </module-data>
               <process-set id="HTTP_Server" numprocs="1"/>
            </process-type>
         </ias-component>This explains why the startall doesn't start the HTTP Server, but why would the install not include the HTTP Server in the configuration?

Illustrator CS6 doesn't open after installing Yosemite (Java issue)

Illustrator CS6 can't open and gives message "need to install the legacy Java SE6 runtime" and gives Apple link to Java program. But even after installing latest java CS6 doesn't work. What can I do? ?

Claudia,
Here is a direct download link that should work:
http://support.apple.com/kb/DL1572
Some have found that the page may turn up blank to start with, so it may be necessary to reload the page.
Others have found that it may depend on browser. Specifically, a switch from Safari has solved it in one case.

Windows 7 64-bit 8GB RAM doesn't start after installing X-Fi drivers

I have Windows 7 64 bit, 8GB RAM for a few months. After inserting an X-Fi Platinum Fatalty Champion Series (S/N MASB046A83R0772D; OP BN 06SB046A00005 Rev A) and installing Creative Sound Blaster X-Fi series driver 2.8.003 dated 26 Jun 09. The sounds plays OK, but after rebooting Windows doesn't start, with a CorruptRegistry error. I have installed Windows from scratch, but it only works until I install the X-Fi driver and reboot. Please help. I have searched the internet and found no solution to my problem besides a Wikipedia article that X-Fi has problem with 64-bit Vista with 4GB RAM or more.

Hi, I am also running windows 7 ultimate 64 with the same sound card and am using the july 5 driver. It works but i cant use the creative control panel as i get a black screen on start-up and when i uninstall the contol panel windows functions normally. I may have to go with the onboard sound to get all 4 speakers to work. I have 6 Gb of ram on a gigabyte X58 Mobo.

Report service doesn't start after installing 9iAS

Forms are fine after installing 9iAS, but report server doesn't
start, and is not listed in Control Panel, Services.
If I try start it as RWMTS60.exe -install oracledev2 tcpip I got
the error "Please consult the installation guides for how to set
up and run this program", if I start it as RWMTS60.exe -listen
oracledev2 I got the error "Rep 0001:Unable to find the report
builder message file. Please verify your installation". Attempt
to run any Reports product (Runtime, for instance) causes
Dr.Watson on RWRUN60.exe. The registry parameter RW60 points to
the ORACLE_HOME/report60 for the Reports Server that is failing.
What do I do to start Reports ?
Thank you,
Kate

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

BPM studio doesn't start on snow leopard

I've installed BPM studion 10.3.1 on my mac running snow leopard. When I start the application the icon bounces for a few times in the dock and then quits without a message. If I start eclipse by hand from the eclipse folder it starts. I can select a working folder, after that it asks me if I want to send feedback to Oracle. After that Eclipse opens without a perspective. When I try to open the BPM perspective I get the error message "Problems opening perspective 'studioPerspective'". I can open other perspectives like Resource.
does anybody have a solution or a suggestion to look into?

I've found the answer myself. I figured that it should run, because it is just a java application. Snow Leapord comes with Java 1.6, but snow leopard is a 64bit OS. It comes with Java 6 64bit and 32bit. If you switch the order of the JRE for java applications in /Applications/Utilities/Java Preferences to show 32bit on top (just drag and drop) then studio just runs fine.
There is also a more advanced solution: Open finder and go the the installation folder of BPM Suite. The default is Applications/OraBPMStudioHome. Right click on the application called "Studio, choose "Show package content". Open Contents/Resources and right click on "script". Choose open with.., choose other and select Texteditor (or any other texteditor including xcode. Now put "-d32" without the "" on the last line just after "exec java". It should no read somethiing like:
exec java -d32 "${OPTIONS[@]}" -jar "$DIR/plugins/org.eclipse.equinox.launcher_1.0.1.R33x_v20070828.jar" $X_ECLIPSE_OPTIONS -showsplash fuego.eclipse.studio
save the file. Now when you start the studio it is forced to use the 32bit JRE. Other java applications still take advantage of the 64bit JRE.

My iTunes doesn't start since the last update

I am using mac os x 10.7.4 and itunes 1.6.3. since this update itunes does not start anymore. What can I do ?

On Vista Home premium, uninstalling and reinstalling buth iTunes and Apple Applicatioon Support did NOT work for me.
What did work for me was manually copyting CoreVideo.dll from the Apple Application Support folder into my iTunes folders (actually, to both of them - under Program Files and Program Files (x86)) as per advice posted in a Windows forum, found after an hour or more of frustration and failure.
This appears to be a bug in the 10.1 installation scriptimng - what's going on?

IMac 24" doesn't start after installing Mavericks.

After installing Mavericks (10.9.2) the machine started having hiccups... rebooting at random times on it's own. After upgrading to 10.9.3, it only got worse. Reboots were more frequent (as little as 1 minute between each reboot). Then it took the final step and went into a state where it remains with black screen, the startup jingle may begin, but is killed within half a second or less... goes into a reboot loop. The DVD sounds, then it tries to reboot again, DVD sounds... sometimes the jingle starts... but is cut off by a reboot. Trying to get ANYTHING done with different key press combinations (option+command+R+P, D, T, Command, Option... pretty much every single combination one can find online for accessing safe boot or recovery or whatever... does not work. The machine seems to have been killed by Mavericks. I have come across a LOT of posts by other people who have experienced the same thing (rebooting after installing Mavericks) going back to October last year, and a few have experienced the same dead computer issue as I am having... all the while there is no fix or explanation from APPLE regarding this issue. I have even opened the machine up and checked all cable connections, tested the HDD on another computer (was ok), cleaned the memory module connectors etc. Before the total crash I had installed a temperature monitoring program with ventilator control, due to the DVD ventilator running at high RPM after installing Maverics. All the temp sensors were reporting modest temps (ranging from 39 - 79 Celsius (only the power supply was above 50 Celsius).
The computer is as useful as a brick by this point. Since it went dead, it has successfully started up 3 times (out of 500+ attempts), but rebooted within a couple of minutes, into it's cycle of dead reboots.
One way of getting it to boot and prepare for re-installation, is to keep the power button pressed until it sounds 3 times long, 3 times short and 3 times long beeps... it would only start making the first beep... then it rebooted in to death again.
Could it be that Mavericks is destroying the firmware, or even killing the hardware? I also have Mavericks on MBA and MBP, where the MBA has no problems, while the MBP freezes up every 2 days or so... requiring a forced reboot.
Anyone with a usable advice on what to do in order to get the machine working again? How many years does it normally take APPLE support staff to fix serious issues like this one? It's already been over 7 months since the first people began experiencing these issues with Mavericks, but nothing has been done about it on APPLE's end ... as far as I can tell.
Looking forward to some solutions.

Just wanted to write the conclusion of this issue here, and make things as clear as possible.
I took the iMac to a support center, and they confirmed that several components on the power supply board were fried and other parts had been overheated. It took a few weeks for them to get the needed parts (much cheaper than replacing the entire unit). I brought the iMac back home and started it up, and it did work... but it was getting very hot very quickly. I was thinking that maybe I should install Mountain Lion on it, and get away from Mavericks... just in case.... the computer had been turned on for around 1 hour at that point, and then it rebooted.... and stayed dead for 10 minutes or so... until it could start up again. Was on for a few minutes... then dead again.
Clearly the cause of the problem was still present, and fixing the symptom did not prove to be a lasting solution.
The machine would not stay turned on long enough (when it DID turn on) for even formatting the disk, so I removed the SDD from it, formatted it with my MBA (connected through USB), and inserted it in the iMac again. Starting it up resulted in a few minutes being turned on, overheating and crashing. Having downloaded ML and created a USB installer for it, it was now a case of trying one's patience ... hoping for the machine to stay turned on long enough to make it all the way through the installation process.... it managed to do the first part of the installation after several hours of crashing and overheating.... and it came to a point where I simply turned it off and gave up... thinking that the problem simply was physical in nature, and not caused by Mavericks as I had assumed from the start. Next day I had renewed energy, turned the puter on and it behaved in the same way... turning off, then starting by itself trying to get through the installation.... it would fail again and again... I left the house, with it turned on, hoping that it would at least manage to finish at some point in time... so that I could write off my "BAD Mavericks" suspicion. When I returned several hours later, the installation was complete and the machine was purring quietly and the back of the computer was NOT hot like a steam iron.
Now it has been working for several days without any problems at all.
The final conclusion is this:
Mavericks IS at fault, and will physically DESTROY computers that are "somehow" not compatible with it. I would have thought that Apple had enough capable engineers to prevent the operating system to mess up the hardware in this way, but clearly I was wrong on that account. I can only WARN other people to even attempt installing Mavericks on puters of this type:
Hardware Overview:
Model Name:   iMac
Model Identifier:     iMac7,1
Processor Name:       Intel Core 2 Duo
Processor Speed:      2.4 GHz
Number of Processors: 1
Total Number of Cores:        2
L2 Cache:     4 MB
Memory:       4 GB
Bus Speed:    800 MHz
Boot ROM Version:     IM71.007A.B03
SMC Version (system): 1.21f4
Serial Number (system):       W8*******X89
Hardware UUID:        00000000-0000-1000-8000-001B639688F7
Anyone claiming that Mavericks is not at fault, is plain and simple WRONG, in DENIAL or LYING. There is absolutely NO doubt in my mind any longer, that the problem was indeed Mavericks getting installed on the machine and messing with the hardware on a level where it should never happen. If someone working at Apple would like to purchase/replace my iMac in order to test it and figure out that this is a REAL problem, they are welcome to do so. I think it is more than guaranteed that the damage caused by this Mavericks nightmare installation will never be recovered, nor will the time and work lost ever be compensated, but I would actually like Apple to acknowledge their responsibility and failure to address this issue in a professional and responsible way.
IF Mavericks was NOT at fault, then someone should explain the logic behind the machine physically burning components shortly after the installation of Mavericks, and even when the SDD had been wiped clean with no OS, it was still overheating and shutting off, until it could finally have ML installed... and at that point it was cured and has worked flawlessly ever since. Not a single hiccup, no over heating, no problems.
My offer to sell/replace the iMac stands if Apple is really interested in looking at this SERIOUS issue with Mavericks. This is NOT a minor issue they should expect simply goes away, or will be ignored by people who experience their machines BURNING to pieces.
On my MBA and MBP Mavericks is not causing any problems, so it is not "all bad", but for the iMac it meant total annihilation.
Anyone who has installed Mavericks on their iMac of similar age as mine, having rebooting and overheating problems: REMOVE the Mavericks installation ASAP and get ML on it before it goes up in flames!
Other Mac's have been reported having the rebooting/overheating problems as well, although I have not noted down which builds those were. The problem is REAL and COSTLY for those who experience it.... both time-wise and in terms of lost time/work.
Hopefully this will help others from getting the same terrible experience as I got, and save some computers from burning up.
<Personal Information Edited by Host>

Elements 13 doesn`t start after installing

the start windows is here with Organizer and Fotoeditor, but they cant be opened.
Windows updates are successful.
Thank you in advance!
Robert

Without exact system info nobody can tell you anything.
Mylenium

Epson Workforce 30 Printer doesn't work since installing 10.6.1

After installing Snow Leopard, the window showing current printer activity indicated that I needed to visit the manufacturer's website to download new drivers in the main dialogue box. I did this and followed all installation instructions given on Epson's site. Now when I try to print, it shows a smaller error message in line with the job currently shown as printing. I tried going into the printer setup> select driver window. But the most recent version I had downloaded wasn't included in the list.
Any ideas would be greatly appreciated.

Apple just released a new package of Epson printer drivers. Look for them at support.apple.com/downloads/.
If your printer is not supported in the above and Epson does not have Snow Leopard compatible drivers for your printer yet, then you may be SOL for the time being. In this case contact Epson to see when then expect to have a compatible driver for your printer.

(Windows XP) iTunes doesn't start

Hi,
My iTunes under Windows XP doesn't start since one week: I can see it started in the taskbar like other applications, as if it were minimized, but nothing else. No error message. If I click on it, nothing happens, if only it doesn't freeze the complete PC. I can only right click > Close.
I uninstalled all iTunes, then installed it again, and it still didn't work.
I downloaded iTunes latest version again to be sure. Still the same.
I looked for solutions over the web, but with no error message it looks difficult to find a case like mine.
Any idea someone?

Hey hervelam,
We have a great resource that will help troubleshoot this issue. It may be isolated to third-party software or plugins, which would explain why uninstalling and reinstalling iTunes has not resolved your issue. For information, please refer to the following:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

Promise 20378 sata raid ide controller: this device doesn't start

My WinXp Promise Fast Track 376/378 (tm) Controller doesn't start, despite installing the right drivers for vista and xp. Ik have a 40 gig Maxtor disk attached to the IDE port of the controller aangesloten. Het Fast Track bios sees this disk correctly. The disk is o.k. since I can access its contents while running Linux Kubunty gutsy gibbon. What is wrong with the windows drivers?
My system:
M/B = MSI KT6 Delta FIS2R
CPU = AMD Athlon(tm) XP 1700+
RAM = 1GB Twinmos M2G9016A-TT pc 3200 Cl2.5
VGA = Ati Radeon 9600 series
HDD = 2x Maxtor 6Y120M0 via raid-0, Maxtor 91303D6 IDE1 master, Maxtor 6Y060L0 IDE2 master, Maxtor 54610H6 promise IDE master
PSU = Trust PW-5159 370W
Optical = Plextor DVDR PX-504A IDE1 slave, Plextor CD-R PX-W121 0A IDE2 slave
OSS = XP Pro SP2, Vista Ult., Kubuntu Gibbon 32bits, Suse 10.3 32 bits

Quote from: Fredrik Åsenius on 14-November-07, 05:57:51
Hello!
Is SATA/RAID enabled in BIOS?
Have you hit F6 during Windows installation, for allowing Windows Set-up to locate the drivers?
If SATA/RAID was disabled, it wouldn't even appear in Device Manager
If the RAID is secondary storage, then hitting F6 won't acheive anything as Windows is already installed
You will however need to go into the RAID BIOS and create an array before you can use the RAIDed disks

ODI 11g : How to migrate ODI objects ?

Hello,
We need to migrate our ODI 11g objects (Packages,Interfaces, DataServers, DataStores and so on) from UAT to PROD environment. For that, we have the following option in our mind.
Option
- create ODI Master and Work repositories on PROD environment;
- import the Master & work repositories from UAT into the new one (ODI Studio);
- configure the Phisical Schemas according to the database connection details for the production environment;
What is the best way for to do that? What elements should be considered in this kind of migration? Some special recommendations?
Any input will be appreciated.
Thanks in advance.
Iulia

If you are migrating to a production environment I would suggest that you create your work repository as an execution only repository. This will limit your access to the Operator interface and you will only have to import your compiled scenarios rather than all of the other work repository specific objects i.e. projects, models, interfaces etc. You will still have to create a master repository which you can do as you have already detailed i.e. create a master repository schema and then import the repository you exported from UAT and update the physical topology settings to match your new environment settings.
You can even generate an ODI package to automate the export and import of scenarios between environments.

MSSQLServer jdbc connect problem on ODI 11G R2

I have a MS SQL Server jdbc connect problem on ODI 11G R2 / Windows server 2008 64 bits.
Tried, one by one, all versions of Microsoft drivers.
Sqljdbc4.jar copied to : %appdata%\odi\oracledi\userlib\
The Topology connect syntax is :
driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
URL : jdbc:sqlserver://<host>:1433
=> All the topology tests end with time-outs.
Installed 10G ODI.
Works with 1.4 java and sqljdbc.jar version 2 jdbc driver.
Times out with version 3 and/or Sqljdbc4.jar + JAVA_HOME & ODI_JAVA_HOME set to 1.6 path.
also tried, with no success (time-outs) on either 10g or 11g :
com.inet.tds.TdsDriver
jdbc:inetdae7://<host>:1433?database=<DB>
same results for :
net.sourceforge.jtds.jdbc.Driver
jdbc:jtds:sqlserver://<host>:1433
Any suggestions for a fix?
Many thanks in advance.

Hello,
ODI (11g) Studio is certified on Windows 32 bit only, not on 64bit.
However you may still install it and configure ODI Studio to run with a 32 bit java.
Details pls see Master Note For ODI 11g Install Issues And Questions (Doc ID 1214428.1).
To connect to SQL Server:
# Check and make sure the authentication mode of your Microsoft SQL Server Server is set to "SQL Server and Windows" or "Mixed", otherwise Oracle Data Integrator (ODI) is unable to connect to the database.
# Before you create the Oracle Data Integrator (ODI) Dataserver in Topology Manager > Physical Architecture, stop all ODI processes, and place the JDBC Driver file in the ODI's userlib and "/drivers" folder.
For ODI Studio (Local No Agent)
%APPDATA%\odi\oracledi\userlib
%APPDATA% is the Windows Application Data directory for the user (usually C:\Documents and Settings\<user>\Application Data).
Standalone Agent
ODI_HOME\oracledi\agent\drivers
Note: If you decide to use the DataDirect driver that comes with ODI 11g install/ embedded in ODI 11g
weblogic.jdbc.sqlserver.SQLServerDriver
Then you don't need to worry about this step.
# Make sure that the database is the default database of the user account employed by ODI for connection, and that the password is correct.
# Verify (in your Microsoft SQL Server Server network configuration) that TCP/IP has been enabled on port 1433.
For more details see How To Set Up JDBC Driver Connections For The Microsoft SQL Server For ODI (Doc ID 423914.1)
If you try sqljdbc.jar, you need to configure ODI_JAVA_HOME to jdk1.5
sqljdbc4.jar, jdk1.6 (since ODI 11g requires jdk1.6, I'd suggest sqljdbc4.jar)
More see Compatibility Matrix For Java Machines And JDBC Drivers Used With ODI (Doc ID 807235.1)
Hope that helps other people who run into this,
Edited by: user742480 on Apr 4, 2011 12:06 PM

ODI 11g 1.1.1.7: Studio doesn't start since install of Java 7

Similar Messages

Maybe you are looking for