ODI Agent Test Failed -Connection timed out
Hi,
I have created an agent and launched it as a scheduler agent using command :
./agentscheduler.sh -name="Agent_Test" -port=20911
it gives message -Server Launched
However when I test it in Topology Manager in Physical Architecture , it gives me error-Agent Test Failed-Connection Timed Out.
Any pointers to why is this error appearing and how it could be resolved ?
Thanks!
Check the port number and also the odi parameters in odiparm.sh
Thanks,
Nagarjuna
Similar Messages
-
Hi,
where can i adjust the timeout for:
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection timed out: connect
The webservice needs 5min to return a message....
I found a duplicate of this on thread:
error initiating a test instance
But no answer
Message was edited by:
HEWizardI found http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/events.htm#BABGGADB
Setting Timeouts for Synchronous Processes
For synchronous processes that connect to a remote database, you must increase the syncMaxWaitTime timeout property in the SOA_Oracle_Home\bpel\domains\default\config\domain.xml file:
<property id="syncMaxWaitTime">
<name>Delivery result receiver maximum wait time</name>
<value>60000000</value>
<comment>
<![CDATA[The maximum time the process result receiver will wait for a
result before returning. Results from asynchronous BPEL processes are
retrieved synchronously via a receiver that will wait for a result from the
container.
<p/>
The default value is 60 seconds.]]>
</comment>
</property>
But this changes nothing...
Is this value ignored? -
TACACS+ configured on router and router is in ACS. I can ping the ACS but the router cannot establish a connection to authenticate users.
aaa group server tacacs+ hq_acs-1
server 10.20.17.2
ip tacacs source-interface GigabitEthernet0/0
aaa authentication login default group tacacs+ local
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa authorization commands 10 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa accounting nested
aaa accounting update newinfo periodic 60
aaa accounting auth-proxy default start-stop group tacacs+
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
aaa accounting resource default start-stop group tacacs+
BigTree_3945#sh ip int br
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0 10.4.3.1 YES NVRAM down down
GigabitEthernet0/1 10.12.10.26 YES NVRAM up up
Serial0/2/0 unassigned YES NVRAM down down
Serial0/2/0.602 10.12.15.10 YES NVRAM down down
Apr 13 11:08:13.673: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:13.673: TPLUS: processing authentication start request id 79
Apr 13 11:08:13.675: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:13.675: TPLUS: Using server 10.20.17.2
Apr 13 11:08:13.675: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:18.676: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:18.676: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:25.834: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:25.834: TPLUS: processing authentication start request id 79
Apr 13 11:08:25.834: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:25.834: TPLUS: Using server 10.20.17.2
Apr 13 11:08:25.834: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:30.836: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:30.836: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:43.689: TAC: Using default tacacs server-group "tacacs" list.
Apr 13 11:08:43.689: TAC+: Opening TCP/IP to 10.20.17.2/49 timeout=5
Apr 13 11:08:51.057: TPLUS: Queuing AAA Authentication request 79 for processing
Apr 13 11:08:51.057: TPLUS: processing authentication start request id 79
Apr 13 11:08:51.057: TPLUS: Authentication start packet created for 79(cisscdb)
Apr 13 11:08:51.057: TPLUS: Using server 10.20.17.2
Apr 13 11:08:51.057: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: Started 5 sec timeout
Apr 13 11:08:54.692: TAC+: TCP/IP open to 10.20.17.2/49 failed -- Connection timed out; remote host not responding
Apr 13 11:08:54.692: TPLUS: Queuing AAA Accounting request 76 for processing
Apr 13 11:08:54.692: TPLUS: processing accounting request id 76
Apr 13 11:08:54.692: TPLUS: Sending AV task_id=332
Apr 13 11:08:54.692: TPLUS: Sending AV timezone=EDT
Apr 13 11:08:54.692: TPLUS: Sending AV service=shell
Apr 13 11:08:54.692: TPLUS: Sending AV start_time=1334329734
Apr 13 11:08:54.692: TPLUS: Sending AV priv-lvl=15
Apr 13 11:08:54.692: TPLUS: Sending AV cmd=show logging <cr>
Apr 13 11:08:54.692: TPLUS: Accounting request created for 76(n20j03t)
Apr 13 11:08:54.692: TPLUS: Using server 10.20.17.2
Apr 13 11:08:54.692: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: Started 5 sec timeout
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out
Apr 13 11:08:56.058: TPLUS(0000004F)/0/NB_WAIT/1BDD9C34: timed out, clean up
Apr 13 11:08:56.058: TPLUS(0000004F)/0/1BDD9C34: Processing the reply packet
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out
Apr 13 11:08:59.693: TPLUS(0000004C)/1/NB_WAIT/20FD90EC: timed out, clean up
Apr 13 11:08:59.693: TPLUS(0000004C)/1/20FD90EC: Processing the reply packet
BigTree_3945#
AAA Client IP Address
10.4.3.* 10.12.15.10
Key
Network Device Group
Test
NJT
AccessLink
(Not Assigned)
Authenticate Using
TACACS+ (Cisco IOS)
RADIUS (Cisco Aironet)
RADIUS (Cisco BBSM)
RADIUS (Cisco IOS/PIX)
RADIUS (Cisco VPN 3000)
RADIUS (Cisco VPN 5000)
RADIUS (IETF)
RADIUS (Ascend)
RADIUS (Juniper)
RADIUS (Nortel)
RADIUS (iPass)
Single Connect TACACS+ AAA Client (Record stop in accounting on failure).
The 10.12.10.* range is listed under the HQ site.
Your help is greatly appreciated.You stated that you can ping ACS from the router, did you try sourcing the packets from the GigabitEthernet 0/0 interface (which is the one TACACS+ will try to use, given the configuration that you posted)?
What does the network path between the router and ACS look like (ie, any firewalls, NAT, etc)?
Can you connect to port 49 at the ACS IP address from the router sourcing the packets from GigabitEthernet 0/0 ?
Are you using VRFs?
What version of IOS? -
SOAPException: Message send failed: Connection timed out
Hi! How to solve "javax.xml.soap.SOAPException: Message send failed: Connection timed out: connect" in a page jspx using ADF Webservices Data Controls ? I'm using JDeveloper 11.1.1.2 .
Edited by: reginaldo oliveira on 16/09/2010 11:29Vishal, I'm taking up this question. I can't to use HTTP Analyser because one of the parameters of my web service is a datasource of weblogic domain, and I know that an error occurs when I have an application in weblogic domain of JDeveloper 11.1.1.2 trying obtain connection pool from other weblogic domain. In fact, I need a way to set proxy and port if I use web service through a web service proxy and/or web service data control of ADF. Using web service proxy, in my class PortClient I have defined a method this way:
public static void definirProxy(){
String enderecoProxy = null;
String porta = null;
try{
enderecoProxy = "190.0.1.236";
porta = "80";
System.setProperty("http.proxyHost", enderecoProxy);
System.setProperty("http.proxyPort", porta);
System.setProperty("http.nonProxyHosts", "localhost, 127.0.0.1");
}catch( MissingResourceException mre ){
mre.printStackTrace();
}this don't work, but I do it because I have read this page:
http://download.oracle.com/javase/1.5.0/docs/guide/net/proxies.html
Do you have an idea? And how to set proxy and port when we using ADF Data Controls of web services? -
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
TOSHIBA Satellite A215
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0029A68C04077DC8
Current user is an administrator.
The current local date and time is 2012-04-18 05:41:18.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon X1200
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: ff966d6a67ef265801e62ca642665008
iPodService 10.6.1.7 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {174B2346-A791-4C25-9515-884E658FE655}
Description: Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
IP Address: 10.100.160.213
Subnet Mask: 255.255.254.0
Default Gateway: 10.100.160.1
DHCP Enabled: Yes
DHCP Server: 10.100.160.2
Lease Obtained: Wed Apr 18 05:39:40 2012
Lease Expires: Wed Apr 18 05:56:20 2012
DNS Servers: 64.250.243.37 <<<<<<<<<<< multiple DNS ADS.
64.250.243.42
Adapter Name: {5C7559AA-708B-4EFC-B67F-25B400863B6B}
Description: Realtek PCIe FE Family Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Here is the latest Diag. i got from iTunes help
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful. <<<<<<<<<< MAYBE PROBLEM HERE
The network connection timed out.<<<<<<<<<<
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-18 04:24:48.See if this article will help:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814 -
Getting error connection timed out while invoking webservice from bpel.
Hi,
I am trying to call a secure webservice developed in .Net having extension .svc from the bpel service and in response i am getting error
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{summary=<summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection timed out: connect</summary>
I am able to call this web service from the java programme using HTTPClient by setting the username/password and soapaction in http Header but not from the BPEL process. This .Net service is synchronous in nature. I also set the proxy in opmn.xml but didn't got any success.
Please reply me ASAP. Need urgent help.
Thanks.Are you working on 11g ? if this is 11g
How are you invoking the webservice ...does it have any authentication..
If the webservice which you are invoking has basic http authentication...
1. In the composite.xml file, right click on the reference and configure WS policies. In security tab, add a security policy named"oracle/wss_http_token_client_policy"
2. Add two binding properties for the reference
(i) oracle.webservices.auth.username
(ii) oracle.webservices.auth.password
and provide the username and password for those two properties...
Just try this out...
Thanks,
N -
TCP active open: Failed connect() Error: Connection timed out SMTP
Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSKThanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM -
TCP active open: Failed connect() Error: Connection timed out
Hi,
There is one message which can't be delieved to the recepient with error " TCP active open: Failed connect() Error: Connection timed out" This is the error that we found in the mail.log_current file.
I have no problem sending email to the same address from my hotmail account.
any suggestion ?
Thanks,
JoeThe message can only mean one thing. Your server cannot connect to that host.
It's possible that the remote system is lying to your Messaging Server, and that's gotten it confused. Some firewalls do this by repeating the entire capability string from the server behind them, but can't actually handle all the capabilities.
PIX firewalls do this.
When you connect, they pretend to be able to "startls", but if you try, they hang up. They appear to handle "EHLO", but when you try, they hang up.
You can put debugging on the tcp_local channel, and see the actual conversation, if you like.
master_debug and slave_debug go into the imta.cnf definition line. MM_DEBUG=5 goes at the end of your option.dat file.
then
imsimta cnbuild
imsimta restart
will attempt to send the message. You will want to back the changes out, as you'll get lots of extra log files you really don't need.
Post the log file, and we can see what's happening. -
When i was waiting for an hour for itunes to grading my 2nd generation ipod touch to a 4.2.1 and it was about done, it suddenly said the network connection timed out and that made the upgrading a fail. Why does it do that? and what does it mean?
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
BIPCatalogUtil extraction always fails with "Connection timed out"
BIPCatalogUtil extraction always fails with "Connection timed out".
Any suggestions on what could be the issue?One thought was that perhaps it was timing out going out some unused port (e.g., the Airport port), but a list shows only the Ethernet port is enabled:
admin$ sudo networksetup -listallnetworkservices
An asterisk (*) denotes that a network service is disabled.
Built-in Ethernet
*AirPort
*Built-in FireWire
*Bluetooth -
Cannot access iTunes Store - "connection timed out" or "secure connection failed" issues.
If you are having problems connecting to the iTunes Store to:
(a) activate a new iPod, iPhone or iPad; or
(b) re-activate an existing iPod. iPhone or iPad after upgrading the OS for the device,
then hopefully this article will assist.
It is assumed that have encountered the following problem. When you connect your device to your PC the device is recognised by iTunes, but the main window simply displays the name of the device (e.g. iPad). The progress bar at the top says "accessing the iTunes Store", but it stalls and eventually there is an error message saying something like "connection timed out".
There are a number of variants of this problem, but the common thread is that your device is unable to access the iTunes Store to authenticate a new device or after upgrading the OS on an existing device.The first recaction is to check that your Internet connection is ok and that that "itunes.exe" a not being blocked by your Windows or third party firewall settings, but the problem persists.
Having recently experienced this problem and scouring the Internet for a solution, I eventually solved it using the following approach:
(a) Check that you are connected to the Internet (i.e can browse the web).
(b) Open iTunes and choose "Run diagnostics" from the help menu and then select the "networking connectivity" option (uncheck the other options) and click "next" twice. A report will show the results with a "green" or "red" dot next to each item. You should see a "green" dot next to the first two items ("Network interfaces verified" and "Internet connection verified"). However there will probably be a "red" dot next to the third item "Secure link to iTunes Store verified".
The important thing to note is that a secure connection could not be established. This is an indication that your wireless security is the problem. It does not satisfy the security level expected by the iTunes Store. It seems that an unsecure connection or one using outdated encryption (such as WEP) is no longer sufficient for the iTunes Store. This may be why the problem has emerged with the most recent versions of iTunes. The now widely used wireless encryption standard WPA or WPA2 is expected.
So you need to check your router wireless security settings and, if you have a PC that uses a wireless connection to the router, make sure its settings match. The following is a guide bearing in mind that there are many different types of routers and Windows OS.
Router
TIP: If you have a wireless connection from your PC to your router, then check your PC wireless security options first to see that "WPA" or "WPA2" are available (see below) as it will be a pain to change your router settings only to discover that your PC does not have the same options.
(a) Most routers can be accessed using your web browser by typing in the router's address (e.g. http://192.186.1.1). If you don't know the address look at the mannual that came with your router as it will tell you how to do this.
(b) Once your browser displays the router interface you may be prompted for a username and password. These may be the default factory or ones that you have created previously. If the username or password has not been changed, but you don't remember of know what they are again go to the mannual that came with your router as it will have that information.
(c) Assuming that you are able to access your router interface, look for the "wireless" tab or menu and a sub-menu or option for the "security settings". They'll be there somewhere. Once you find the security options you can select the encryption level. As stated above, you should choose "WPA" or "WPA2". You will then be asked to create a network key which can be anything with the required number of letters and/or digits.
(d) Once your finished write the settings down (including the key) as you will need them for your PC if you have a wireless connection to the router. Save the changes (if prompted to do so) and re-boot your router.
PC Wireless
(a) Again the appoach that you need to take will depend on your OS (XP, Vista or Windows 7), but generally speaking if you go to the "network" on your PC there will be the option to highlight it and right click or choose a "properties" item. I vaugely think this can be done in XP by right clicking the wireless icon in the taskbar and navigating to the dialogue box that shows your network. In Windows 7 you will need to go to the "Network and Sharing Center" and then choose "Manage wireless networks".
(b) At some point (sorry to be vauge) you will find the wireless network security options for your network. Select the same level of encrytion ("WPA" or "WPA2") and type in the same network key that you chose for your router. Save the changes and your wireless connection should come to life. If not then make sure that you have put in the correct settings before freaking out.
Back to iTunes
Once you are connected to your router again (wirelessly or by lan), then plug in your device and open iTunes. As before it will try to access the iTunes Store, but hopefully you won't have any problem establishing a secure connection and you'll be up and running.
Best of luck!Something is still blocking iTunes, do you have any other firewall installed?
When you say you removed Norton, to you mean you uninstalled it. An uninstalled Norton security product can still bock iTunes as some of it is left behind.
Several people have found that using the Norton Removal Tool to remove all traces of Norton fixes this problem.
http://service1.symantec.com/Support/tsgeninfo.nsf/docid/2005033108162039?OpenDo cument -
Been trying to update my ipad, and it keeps failing. the screen message I get says network failed ot timed out. Have no problem with internet coverage. Have tried on several occasions now.
Tap Settings > General > Reset > Reset Network Settings
Then restart the device.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears. -
OpenMarket sms api gives "Connection timed out: connect"
Hello All,
I am new to web applications with sms services.
I am trying to send sms from my java application to mobile device. But I am getting below error.
Aug 25, 2010 10:55:58 AM com.eha.sms.ema.EMACMMessageSendProxy init
INFO: Move to send the receiver initialization.
Destination address = +**********
Source addres = +*****
Sending message to Simplewire...
REQUEST XML ==
<?xml version="1.0" ?>
<request version="3.0" protocol="wmp" type="submit">
<user agent="Java/SMS/2.9.16"/>
<account id="******************" password="***************"/>
<option type="production"/>
<source ton="0" address="+*****"/>
<destination ton="0" address="+**********"/>
<message udhi="false" text="Hello World!"/>
</request>
protocol: http
remote host: ******Some site given to us by open market people that opens on browser**********
remote port: 8080
remote file: /wmp
{main} [10:55:58.722] Conn: added module com.simplewire.http.RetryModule
{main} [10:55:58.725] Conn: added module com.simplewire.http.AuthorizationModule
{main} [10:55:58.726] Conn: added module com.simplewire.http.DefaultModule
{main} [10:55:58.747] Conn: Creating Socket: smsc-01.openmarket.com:8080
{main} [10:56:19.759] Conn: java.net.ConnectException: Connection timed out: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at java.net.Socket.<init>(Unknown Source)
at com.simplewire.http.HTTPConnection$_A.run(Unknown Source)
Message was not sent!
Error Code: 106
Error Description: A connection could not be established with the Simplewire network. Connection timed out: connect
Error Resolution:
The code I am using is as below.
private void config()
Properties properties = new Properties();
InputStream smscmReceiver = EMACMMessageSendProxy.class.getClassLoader().getResourceAsStream("sms.properties");
try
properties.load(smscmReceiver);
System.out.println(properties.getProperty("SMS.SubscriberID").trim());
System.out.println(properties.getProperty("SMS.Password").trim());
System.out.println(properties.getProperty("SMS.DestinationAddress").trim());
System.out.println(properties.getProperty("SMS.SourceAddress").trim());
SMS sms = new SMS();
// subscriber settings
sms.setRemoteHost(" ******Some site given to us by open market people that opens on browser**********");
sms.setDebugMode(true);
sms.setRemotePort(8080);
sms.setSubscriberID(properties.getProperty("SMS.SubscriberID").trim());
sms.setSubscriberPassword(properties.getProperty("SMS.Password").trim());
// Message Settings
sms.setDestinationAddr(properties.getProperty("SMS.DestinationAddress").trim()); // recipient of message
sms.setSourceAddr(properties.getProperty("SMS.SourceAddress").trim()); // originator of message
sms.setMsgText("Hello World!");
System.out.println("Sending message to Simplewire...");
// submit message and check results
if (sms.submit())
System.out.println("Message was sent!");
System.out.println("Ticket ID: " + sms.getMsgTicketID());
else
System.out.println("Message was not sent!");
System.out.println("Error Code: " + sms.getErrorCode());
System.out.println("Error Description: " + sms.getErrorDesc());
System.out.println("Error Resolution: " + sms.getErrorResolution() + "\n");
} catch (IOException e)
log.error("Load profile sms.properties failed to send Move.", e);
I am using windows 7 and the required info from the java code is picked up from a property file.
destination address is a "+" sign followed by cell number of client in US and I am in diff country.
source code I am using is "+" sign followed by a short code given by client.
I am also not aware what short codes are for.
I am also not sure whether I am passing correct parameters.
I just followed a demo code from the api's sample file. (open market api......swsms-2.9.16 is the jar used.).
would like to know If destination address can be my cell number.
The open market people have configured the demo short code for our SMS messaging account.
This feature will allow us to test our platform to send and receive SMS messages
while we are waiting for our dedicated short code.
Mobile Originated messages MUST start with our assigned keyword(s) to be routed to you.
We have a few keywords but don't know how to use them.
Please help!
Thanks in advance.
Edited by: Vish_1x1 on Aug 24, 2010 11:06 PMI had a same problem.
It was definately URL and SOAP Action Problem.
Also, I didnt configure the Proxy too.
Please dont waste more time in looking inot other configs.
Just give a careful look at Target URL and SOAP Action, again and again.
Sweta , Please make this question Answerd , it will be useful for other users.
And Bahvesh Deserves good points..
Thanks ,
Deo. -
I can no longer connect to the ITunes Store. CAn you help? When I do the diagnostics it says Securie link to itunes store failed.
I think I may be having the same problem. "We could not complete your iTunes Store request. The network connection timed out. Make sure your network settings are correct and your network connection is active, then try again." All tests pass the diagnostics. iPhone restored to factory settings in DFU mode, but when beginning to sync I get this error message. I've been searching online for fixes and tried several suggestions, but nothing worked so far. (disabled antivirus, firewall, ie settings, uninstall/reinstall itunes...) I'm getting very frustrated & hoping someone on here can help.
-
G6 UI Customization build problem - Connection timed out: connect
For anyone else who's having the same problem we're having:
When I run ANT on the ui customization folder, I get this error:
Buildfile: build.xml
BUILD FAILED
C:\plumtree_ui_source\portalui\6.0.x\test\build.xml:14: The following error occu
rred while executing this line:
Error reading project file C:\plumtree_ui_source\portalui\6.0.x\test\build_core.
xml: Connection timed out: connect
Total time: 21 seconds
We're running behind a proxy. ANT has to connect to the Java website to pull down it's DTD. So, the answer is to first run the following command to configure the proxy, replacing the proxy host, port, username, and password with yours:
set ANT_OPTS=-Xms128m -Xmx800m -DproxySet=true -DproxyHost=10.0.0.0 -DproxyPort=80 -DproxyUser=myUsername -DproxyPass=myPasswordThanks for the post, it fixed my issue!
Maybe you are looking for
-
Creating a Virtual Disk using Diskpart
Hi, I'm trying to study for a test on Windows 7 and I'm trying to install a Virtual disk and I keep getting the same error. The drive has been "cleaned" using the diskpart utility and is a 300 gb drive. here is the code that I used and the error as c
-
Adobe Photoshop CS5 crashes when I print!
When I print from Adobe Photoshop CS5 in Mac OSX Lion it crashes. However, when I print one copy it prints. I am using an Epson 1400. What must I do to stop Photoshop CS5 from crashing. Thaks
-
Payment method in the Netherlands,
How come adobe only accepts credit card payments in the Netherlands? The smallest webshops accept paypal ideal and what so ever. You guys are way behind on things. We had to buy the illustrator package but because our company does not have a creditca
-
Hi All, Can anyone please tell me what is Order Document Management in SAP SCM ? Is it part of APO ? Thanks, Prabhat
-
IMac shuts down then reboots.
Here is the report generated after my computer shuts down.I have no idea what all this means. Can someone explain. Thanks Pete Anonymous UUID: 3011F7A9-030E-0E4C-CAF9-1EAAC9C1E04D Sat May 17 13:12:57 2014 Panic(CPU 5): NMIPI for spinlock acquis