ODI - Logs purged while ETL is in progress.

Hi All,
We are using ODI 11.1.6 to execute ETL. We found that while a load plan is in progress, after some time ODI agent automatically stops executing the load plan, purges the logs and on agents command prompt window writes a message "Agent <AGENT NAME> executing load plan log purge for work repository <Work Repo Name>". After this, work repository goes down and ETL execution is halted.
Is there any parameter which can be set for this behavior of ODI?
Regards
Gaurav.

Similar Messages

One or more required office component failed to complete successfully for more information, consult the setup log file. while uninstallation of sharepoint 2013

One or more required office component failed to complete successfully for more information, consult the setup log file. while uninstallation of sharepoint 2013

go to start > run > type %temp% > here check for latest file and provide us details in that log file
If this helped you resolve your issue, please mark it Answered

Error in crawl log "Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "

Hi
I get the following error in my crawl logs
"Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "
Because of this i suspect, the search results are not including those aspx pages marked as "Hide physical urls from search".
This error is not available in the another environment where the aspx pages are coming in the results.
Thanks
Joe

Hi Joe,
Greetings!
Reset the index and re-crawl. That usually clears it
If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
Probably you need to debug the BDC code that underlies the external content types.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/41a86c43-151d-47cd-af73-967a4c940611/lotus-notes-connector-error-while-crawling-lob-contents?forum=sharepointsearch
Please remember to click 'Mark as Answer' on the answer if it helps you

ODI 20088:Error While Generating The Scenario

Hi,
Today I have change the name my logical file schema(name is change to lower to upper case).Then select the new schema from File Model (only it is using the File Schema).Then Try to generate the scenario again but getting an error like this:
ODI 20088:Error While Generating The Scenario
java.lang.NullPointerException
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPopSourceSet(SnpGeneratorSQLCIT.java:7990)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPopCollectionBuild(SnpGeneratorSQLCIT.java:7726)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.preComputePop(SnpGeneratorSQLCIT.java:7668)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPop(SnpGeneratorSQLCIT.java:7568)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPackageStep(SnpGeneratorSQLCIT.java:10477)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2883)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2817)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11481)
     at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11505)
     at com.sunopsis.graphical.dialog.SnpsDialogScen.generateScen(SnpsDialogScen.java:190)
     at com.sunopsis.graphical.scenario.DwgScenGeneratingWizard.generate(DwgScenGeneratingWizard.java:68)
     at oracle.odi.ui.action.SnpsPopupActionGenerateScenHandler.actionPerformed(SnpsPopupActionGenerateScenHandler.java:103)
     at oracle.odi.ui.SnpsActionControler.handleEvent(SnpsActionControler.java:86)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:897)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
     at java.awt.Component.processMouseEvent(Component.java:6297)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3275)
     at java.awt.Component.processEvent(Component.java:6062)
     at java.awt.Container.processEvent(Container.java:2039)
     at java.awt.Component.dispatchEventImpl(Component.java:4660)
     at java.awt.Container.dispatchEventImpl(Container.java:2097)
     at java.awt.Component.dispatchEvent(Component.java:4488)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4236)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4166)
     at java.awt.Container.dispatchEventImpl(Container.java:2083)
     at java.awt.Window.dispatchEventImpl(Window.java:2489)
     at java.awt.Component.dispatchEvent(Component.java:4488)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:668)
     at java.awt.EventQueue.access$400(EventQueue.java:81)
     at java.awt.EventQueue$2.run(EventQueue.java:627)
     at java.awt.EventQueue$2.run(EventQueue.java:625)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$3.run(EventQueue.java:641)
     at java.awt.EventQueue$3.run(EventQueue.java:639)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:638)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Please Help
Thanks
Anindya

If you have not deleted the old file schema, then it should have been work but it seems to be theissues with the link between interface and model .
I cannot say this is the actual reason but it might be. Since you have draged the file datastore to interface, interface is probably pointing to old schema and file model is pointing new schema.
I guess you have to recreate the interface again. Let me know how it is going with you
Bhabani
http://dwteam.in

Is a Form locked while saving is in progress?

Hi,
Is there a way to advice a user to not switch to another page while a form is saving? Or can I create a pop up form to appear while saving is in progress?
I have observed that while a form is being saved, while the user switched the form to another page, the progress of saving the first page is locked causing the server to not respond anymore, CPU usage reached the maximum available resource.
How can we avoid such?
Thanks.
Edited by: Nozume on Aug 17, 2010 2:36 PM

You could certainly look into using a simple piece of custom javascript that will display an alert message once a form has been saved.
First place to start is :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/apa.html
Cheers
John
http://john-goodwin.blogspot.com/

ODI Log Level

Hi,
I am looking for a description of ODI Log Levels.
I know that the log level controls the details of the log output in ODI operator, but does exists some more detailed documentation about it?
I would need information like what details are shown in which log level.
Thanks in advance!
Cheers,
H.

It is important to understand that the way odi works, it uses the "log" to drive all executuions. When you start a scenario, it copies eachof the steps of the scenarios into the execution log with the session ID, and wih a status of Waiting. As it executes each, it marks it as being executed, and when complete, marks it as completed (in or or successfully). When it has executed all the steps, it will go back to the log and selectively delete the entries there. When you execute the scenario, you execute it with a log-level of 0-5, and ODI will basically delete all entries in the log with a level > your chosen level. If you inspect the steps of a KM, Procedure etc, you will see that each has a log-level associated with it. This is what will decide if it is to be kept or not.
If the session ends in failure, it will keep all the entries.

Type of error in the log file while using using call transaction mode u2018Eu2019

Hi Gurus,
Please Answer for this qusetion urgently
what type of error exactly you will be seeing in the log file while using call transaction mode u2018Eu2019?
Thanks/
Radha.

Hi,
Can you be clear.
In call transaction , no error logs are created, you have to handle the errors explicitly using the structure BDCMSGCOLL.
Whenever you use E mode then if the transaction encounters any of the errors i.e. data type mismatching or invalid values etc, it will stop at that screen.
You can handle the errors in call transaction in the following method.
create a table using the structure BDCMSGCOLL.
then
loop at ......
      CALL TRANSACTION 'XK01' USING I_BDCDATA MODE 'N' UPDATE 'S' MESSAGES INTO I_MESGTAB.
endloop.
SORT I_MESGTAB BY MSGID MSGV1 ASCENDING.
DELETE ADJACENT DUPLICATES FROM I_MESGTAB.
LOOP AT I_MESGTAB.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID   = I_MESGTAB-MSGID
        LANG = I_MESGTAB-MSGSPRA
        NO   = I_MESGTAB-MSGNR
        V1   = I_MESGTAB-MSGV1
        V2   = I_MESGTAB-MSGV2
        V3   = I_MESGTAB-MSGV3
        V4   = I_MESGTAB-MSGV4
      IMPORTING
        MSG = MESG1.
    IF I_MESGTAB-MSGTYP = 'S' .
      WA_SUCCMESG-MESG = MESG1.
      APPEND WA_SUCCMESG TO I_SUCCMESG.
else     IF I_MESGTAB-MSGTYP = 'E' .
      WA_ERRMESG-MESG = MESG1.
      APPEND WA_ERRMESG TO I_ERRMESG.
    ENDIF.
ENDLOOP.
Hope this is clear.
Thanks and Regards.

How to open log file while program is running?

Hi,
I am using log4j to generate a log file. The application connects to a remote server and does some updates on a database. Is it possible to view the log file while the program is running? When I click on the log file to open it, I get a message "the document is in use by another application and cannot be accessed".
Looking for ideas to get around this problem.
Thanks and Regards,
Harsha Hegde

tail.exe -f
Tail is a Unix program but if you search google you can find a port for Windows. It will show the contents of the file in a cmd prompt and will update as new lines are being added to the file so you can see the most up-to-date version as log4j is writing to it.

UE-V 2.1 log out while off network failing

Using UE-V 2.1
Using folder redirection for desktop, documents, pictures, etc
Win 8.1 U1 all updates
Offline files enabled, machine is set to be always offline to allow for files to be locally cached so when a user goes home they do not need to get on the VPN to have access to files on desktop
When user attempts to log out while NOT connected to the VPN the log out fails. The machine attempts to log out, and for a few moments the UE-V log out process runs where it begins to try and sync OS settings, etc.
However after about 30 seconds the user is kicked back to the start menu. The following event is logged in the event log.
Event 1077 "The attempt by user <domain>\<user> to logoff computer xxxxxx failed
Any help with this would be nice. If the user is connected to the VPN during the log out process UE-V functions normally.

Have you considered using the SyncProvider? You may want to read through
this TechNet article and consider the implications of Offline Files as are discussed in regards to UE-V 2.0:
If Offline files are enabled and the folder is pinned then UE-V will unpin this folder and sync directly to the central SMB directory.
NOTE: In V1.0 if you wanted to use UE-V in a CorpNet disconnected manner (aka traveling with a Laptop), then the guidance is to use Offline Files to ensure that your settings roamed.
We received sufficient customer feedback that turning on Offline files is a non-trivial enterprise blocker. So in V2.0, we created a tightly coupled synchronization engine to cache your data locally and synchronize the settings to the central server.
This feature area does not replace Offline Files or Folder Redirection.
UE-V 2.0 does not work well with Offline folders so the guidance is not to set the settings storage path to a pinned Offline or CSC folder.
Additionally, you mention the logoff event, are there any corresponding events from the UE-V Event Logs?
Brandon
MDOP on the Springboard Series on TechNet

Alert & Audit Log Purging sample script

Hi Experts,
Can somebody point to sample scripts for
1. alert & audit log purging?
2. Listener log rotation?
I am sorry if questions look too naive, I am new to DBA activities; pls let me know if more details are required.
As of now the script is required to be independent of versions/platforms
Regards,

34MCA2K2 wrote:
Thank a lot for your reply!
If auditing is enabled in Oracle, does it generate Audit log or it inserts into a SYS. table?
Well, what do your "audit" initialization parameters show?
For the listener log "rotation", just rename listener.log to something else (there is an OS command for that), then bounce the listener.
You don't want to purge the alert log, you want to "rotate" it as well. Just rename the existing file to something else. (there is an OS command for that)
So this has to be handled at operating system level instead of having a utility. Also if that is the case, all this has to be done when database is shut down right?
No, the database does not have to be shut down to rotate the listener log. The database doesn't give a flying fig about the listener log.
No, the database does not have to be shut down to rotate the alert log. If the alert log isn't there when it needs to write to it, it will just start a new one. BTW, beginning with 11g, there are two alert logs .. the old familiar one, now located at $ORACLE_BASE/diag/rdbms/$ORACLE_SID/$ORACLE_SID/trace, and the xml file used by adrci. There are adrci commands and configurations to manage the latter.
Again, I leave the details as an exercise for the student to practice his research skills.
Please confirm my understanding.
Thanks in advance!

LDAP LOG PURGE (Housekeeping)

I have 2 large tables in LDAP,
1.ods.ods_chg_log (size :9375M)
2.ods.ds_attrstore(size :2431M)
Please anyone to help me and tell me how to housekeeping thees two tables?
Thabks,
Bryan

Hi Bryan,
1. If I am correct, the changes to the OID are stored in the ODS.ODS_CHG_LOG table You may want to have a look at
Metalink Note:301727.1:
Change Log Purging - Overview to purge some of the Change Log Entries.
You may also get information about the same from the Oracle Internet Directory Administrator's Guide at this link :-
http://docs.oracle.com
2. Again, if I am correct, the ods.ds_attrstore stores information about OID Entry Attributes. I am not sure if we can / should purge the data in this table......but, 2431M for the table seems unusual.....how many records does it currently hold ?
Regards,
Sandeep

Log purge

Hi,
AWT groups in TimesTen data store.
Replication and cache agent are started.
In the beginning, log purge works well. Later I found that more and more logs are in log directory.
So I run:
call ttLogHolds
< 245, 40265728, Replication , PERF7420:_ORACLE >
< 841, 48642048, Checkpoint , rccpp.ds0 >
< 841, 48646144, Checkpoint , rccpp.ds1 >
Command> call ttRepSTart;
12026: The agent is already running for the data store.
The command failed.
It shows that replication agent is running. I try to stop it and restart it, and run ttCkpt and ttLogHolds.
Command> call ttLogHolds;
< 414, 56417344, Replication , PERF7420:_ORACLE >
< 845, 35186688, Checkpoint , rccpp.ds0 >
< 845, 38623232, Checkpoint , rccpp.ds1 >
3 rows found.
It seems that there is some issue about replication agent.
Regards,
Nesta
Edited by: nesta on Mar 4, 2010 6:50 AM

Hi Nesta,
Just because the repagent is running doesn't mean it is able to apply stuff in Oracle. Is Oracle up? Is it accepting connections? Check the TimesTen daemon log and the dsname.awterrs file to see what they show.
Chris

ODI-20120: Error while Journalizing

Hello All,
While I was trying to "start journal" I have received the error: ODI-20120: Error while Journalizing.
Not sure about the reson of the error. I have configured the Journalizing tab of Module. I have opted for simple journalizing.
Can any one help me how to resolve the error on the question?
Regards,
User1672911

Hi,
Following are the details.
Error message is :
"ODI-20120: Error while Journalizing" . Nothing more is appearing using which further investigation can be done.
I am using ODI 11G
JKM name is : JKM Oracle Simple
Regards,
User1672911

Error While ETL

I got following error while running ETL for Oracle Financials.
Can someone help in this problem?
I am using OBIA 7.9.6.4 with EBS R12.1.3 Vision.
Following is the session log.
2013-02-27 15:28:21 : DEBUG : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : DBG_21082 : Upd_Strategy_W_ORA_PRODUCT_DS_TMP_Ins_Upd (Input Group 0): : Current Input data:
2013-02-27 15:28:21 : INFO : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : CMN_1053 : Input row from EXPTRANS: Rowdata: ( RowType=0(insert but dropped due to abort) Src Rowid=2 Targ Rowid=2
DATASOURCE_NUM_ID (DATASOURCE_NUM_ID:Double:): "1000.000000000000"
INVENTORY_ITEM_ID (INVENTORY_ITEM_ID:Double:): "936.0000000000000"
ORGANIZATION_ID (ORGANIZATION_ID:Double:): "204.0000000000000"
PROD_NAME (PROD_NAME:Char.100:): "Formed Sheet Metal Shell Bottom"
PRODUCT_TYPE_CODE (PRODUCT_TYPE_CODE:Char.50:): "P"
PRODUCT_TYPE_DESC (PRODUCT_TYPE_DESC:Char.255:): "Purchased item"
PR_PROD_LN (PR_PROD_LN:Char.100:): "Unspecified"
PR_PROD_LN_DESC (PR_PROD_LN_DESC:Char.255:): "(NULL)"
CONFIG_CAT_CODE (CONFIG_CAT_CODE:Char.50:): "(NULL)"
CONFIG_CAT_DESC (CONFIG_CAT_DESC:Char.80:): "(NULL)"
PRICE_TYPE_CD (PRICE_TYPE_CD:Char.30:): "(NULL)"
BASIC_PRODUCT (BASIC_PRODUCT:Char.30:): "(NULL)"
PR_EQUIV_PROD_NAME (PR_EQUIV_PROD_NAME:Char.100:): "(NULL)"
CONFIG_PROD_IND (CONFIG_PROD_IND:Char.1:): "(NULL)"
CONTAINER_CODE (CONTAINER_CODE:Char.50:): "(NULL)"
CONTAINER_DESC (CONTAINER_DESC:Char.80:): "(NULL)"
INDUSTRY_CODE (INDUSTRY_CODE:Char.50:): "(NULL)"
INDUSTRY_NAME (INDUSTRY_NAME:Char.80:): "(NULL)"
INDUSTRY_STD_DESC (INDUSTRY_STD_DESC:Char.255:): "(NULL)"
INTRODUCTION_DT (INTRODUCTION_DT:Date:): "(NULL)"
LOW_LEVEL_CODE (LOW_LEVEL_CODE:Char.50:): "(NULL)"
MAKE_BUY_IND (MAKE_BUY_IND:Char.1:): "B"
PROD_LIFE_CYCL_CD (PROD_LIFE_CYCL_CD:Char.30:): "(NULL)"
PROD_REPRCH_PERIOD (PROD_REPRCH_PERIOD:Double:): "(NULL)"
PROD_STRUCTURE_TYPE (PROD_STRUCTURE_TYPE:Char.30:): "(NULL)"
PROD_GRP_CODE (PROD_GRP_CODE:Char.50:): "(NULL)"
PROD_GRP_DESC (PROD_GRP_DESC:Char.80:): "(NULL)"
STORAGE_TYPE_CODE (STORAGE_TYPE_CODE:Char.50:): "(NULL)"
STORAGE_TYPE_DESC (STORAGE_TYPE_DESC:Char.80:): "(NULL)"
BATCH_IND (BATCH_IND:Char.1:): "(NULL)"
BRAND (BRAND:Char.30:): "(NULL)"
COLOR (COLOR:Char.30:): "(NULL)"
CUSTOM_PROD_FLG (CUSTOM_PROD_FLG:Char.1:): "(NULL)"
PACKAGED_PROD_FLG (PACKAGED_PROD_FLG:Char.1:): "(NULL)"
RTRN_DEFECTIVE_FLG (RTRN_DEFECTIVE_FLG:Char.1:): "Y"
SALES_PROD_FLG (SALES_PROD_FLG:Char.1:): "(NULL)"
SALES_SRVC_FLG (SALES_SRVC_FLG:Char.1:): "N"
SERIALIZED_FLG (SERIALIZED_FLG:Char.1:): "N"
NRC_FLG (NRC_FLG:Char.1:): "Y"
FRU_FLG (FRU_FLG:Char.1:): "(NULL)"
ITEM_SIZE (ITEM_SIZE:Double:): "(NULL)"
LEAD_TIME (LEAD_TIME:Char.30:): "(NULL)"
MTBF (MTBF:Double:): "(NULL)"
MTTR (MTTR:Double:): "(NULL)"
PART_NUM (PART_NUM:Char.50:): "CM23597"
VENDOR_LOC (VENDOR_LOC:Char.50:): "(NULL)"
VENDOR_NAME (VENDOR_NAME:Char.100:): "Unspecified"
VENDR_PART_NUM (VENDR_PART_NUM:Char.50:): "(NULL)"
DISCONTINUATION_DT (DISCONTINUATION_DT:Date:): "(NULL)"
HAZARD_MTL_DESC (HAZARD_MTL_DESC:Char.80:): "(NULL)"
HAZARD_MTL_CODE (HAZARD_MTL_CODE:Char.50:): "(NULL)"
SALES_UOM_CODE (SALES_UOM_CODE:Char.50:): "Ea"
SALES_UOM_DESC (SALES_UOM_DESC:Char.80:): "Each"
SERIALIZED_COUNT (SERIALIZED_COUNT:Double:): "(NULL)"
SHELF_LIFE (SHELF_LIFE:Double:): "1.000000000000000"
SHIP_MTHD_GRP_CODE (SHIP_MTHD_GRP_CODE:Char.50:): "(NULL)"
SHIP_MTHD_GRP_DESC (SHIP_MTHD_GRP_DESC:Char.80:): "(NULL)"
SHIP_MTL_GRP_CODE (SHIP_MTL_GRP_CODE:Char.50:): "(NULL)"
SHIP_MTL_GRP_DESC (SHIP_MTL_GRP_DESC:Char.80:): "(NULL)"
SHIP_TYPE_CODE (SHIP_TYPE_CODE:Char.50:): "(NULL)"
SHIP_TYPE_DESC (SHIP_TYPE_DESC:Char.80:): "(NULL)"
SOURCE_OF_SUPPLY (SOURCE_OF_SUPPLY:Char.30:): "(NULL)"
SPRT_WITHDRAWL_DT (SPRT_WITHDRAWL_DT:Date:): "(NULL)"
UOM (UOM:Char.30:): "(NULL)"
UOM_I (UOM_I:Char.50:): "(NULL)"
BASE_UOM_CODE (BASE_UOM_CODE:Char.50:): "Ea"
BASE_UOM_DESC (BASE_UOM_DESC:Char.80:): "Each"
UNIT_GROSS_WEIGHT (UNIT_GROSS_WEIGHT:Double:): "0.1000000000000000"
UNIT_NET_WEIGHT (UNIT_NET_WEIGHT:Double:): "0.1000000000000000"
UNIT_VOLUME (UNIT_VOLUME:Double:): "0.1000000000000000"
UNIV_PROD_CODE (UNIV_PROD_CODE:Char.50:): "(NULL)"
UNIV_PROD_DESC (UNIV_PROD_DESC:Char.80:): "(NULL)"
UOV_CODE (UOV_CODE:Char.50:): "FT3"
UOV_DESC (UOV_DESC:Char.80:): "Cubic foot"
UOW_CODE (UOW_CODE:Char.50:): "Lbs"
UOW_DESC (UOW_DESC:Char.80:): "Pounds"
APPLICATION_FLG (APPLICATION_FLG:Char.1:): "(NULL)"
BODY_STYLE_CD (BODY_STYLE_CD:Char.30:): "(NULL)"
BODY_STYLE_CD_I (BODY_STYLE_CD_I:Char.50:): "(NULL)"
CASE_PACK (CASE_PACK:Double:): "(NULL)"
CTLG_CAT_ID (CTLG_CAT_ID:Char.30:): "(NULL)"
DEALER_INV_PRICE (DEALER_INV_PRICE:Double:): "(NULL)"
DETAIL_TYPE (DETAIL_TYPE:Char.30:): "(NULL)"
DOORS_TYPE_CD (DOORS_TYPE_CD:Char.30:): "(NULL)"
DRIVE_TRAIN_CD (DRIVE_TRAIN_CD:Char.30:): "(NULL)"
ENGINE_TYPE_CD (ENGINE_TYPE_CD:Char.30:): "(NULL)"
FUEL_TYPE_CD (FUEL_TYPE_CD:Char.30:): "(NULL)"
GROSS_MRGN (GROSS_MRGN:Double:): "(NULL)"
INVENTORY_FLG (INVENTORY_FLG:Char.1:): "Y"
MAKE_CD (MAKE_CD:Char.30:): "(NULL)"
MODEL_CD (MODEL_CD:Char.30:): "(NULL)"
MODEL_YR (MODEL_YR:Double:): "(NULL)"
MSRP (MSRP:Double:): "(NULL)"
ORDERABLE_FLG (ORDERABLE_FLG:Char.1:): "(NULL)"
PROD_NDC_ID (PROD_NDC_ID:Char.30:): "(NULL)"
PROD_TYPE (PROD_TYPE:Char.30:): "(NULL)"
PROFIT_RANK (PROFIT_RANK:Char.30:): "(NULL)"
REFERRAL_FLG (REFERRAL_FLG:Char.1:): "(NULL)"
RX_AVG_PRICE (RX_AVG_PRICE:Double:): "(NULL)"
SERVICE_TYPE (SERVICE_TYPE:Char.30:): "(NULL)"
STATUS (STATUS:Char.30:): "(NULL)"
R_TYPE (R_TYPE:Char.30:): "(NULL)"
SUB_TYPE (SUB_TYPE:Char.30:): "(NULL)"
SUB_TYPE_CD (SUB_TYPE_CD:Char.30:): "(NULL)"
TGT_CUST_TYPE (TGT_CUST_TYPE:Char.30:): "(NULL)"
TRANSMISSION_CD (TRANSMISSION_CD:Char.30:): "(NULL)"
TRIM_CD (TRIM_CD:Char.30:): "(NULL)"
UNIT_CONV_FACTOR (UNIT_CONV_FACTOR:Double:): "(NULL)"
VER_DT (VER_DT:Date:): "(NULL)"
PAR_INTEGRATION_ID (PAR_INTEGRATION_ID:Char.30:): "(NULL)"
CREATED_ON_DT (CREATED_ON_DT:Date:): "12/09/1997 15:59:47.000000000"
CHANGED_ON_DT_OUT (CHANGED_ON_DT:Date:): "02/27/2013 15:28:19.000000000"
AUX1_CHANGED_ON_DT (AUX1_CHANGED_ON_DT:Date:): "(NULL)"
AUX2_CHANGED_ON_DT (AUX2_CHANGED_ON_DT:Date:): "(NULL)"
AUX3_CHANGED_ON_DT (AUX3_CHANGED_ON_DT:Date:): "(NULL)"
AUX4_CHANGED_ON_DT (AUX4_CHANGED_ON_DT:Date:): "(NULL)"
SRC_EFF_FROM_DT (SRC_EFF_FROM_DT:Date:): "01/01/1899 00:00:00.000000000"
SRC_EFF_TO_DT (SRC_EFF_TO_DT:Date:): "(NULL)"
DELETE_FLG (DELETE_FLG:Char.1:): "N"
INTEGRATION_ID (INTEGRATION_ID:Char.80:): "936"
TENANT_ID (TENANT_ID:Char.80:): "DEFAULT"
X_CUSTOM (X_CUSTOM:Char.10:): "(NULL)"
CREATED_BY_ID (CREATED_BY_ID:Char.80:): "(NULL)"
CHANGED_BY_ID (CHANGED_BY_ID:Char.80:): "(NULL)"
UPDATE_FLG (UPDATE_FLG:Char.10:): "U"
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : CMN_1086 : Upd_Strategy_W_ORA_PRODUCT_DS_TMP_Ins_Upd: Number of errors exceeded threshold [1].
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : TM_6085 : A fatal error occurred at transformation [EXPTRANS], and the session is terminating.
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : TM_6085 : A fatal error occurred at transformation [EXPTRANS], and the session is terminating.
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : TM_6085 : A fatal error occurred at transformation [mplt_BC_ORA_ProductCategories_Resolve.FILTRANS], and the session is terminating.
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : TM_6085 : A fatal error occurred at transformation [mplt_BC_ORA_ProductCategories_Resolve.FILTRANS], and the session is terminating.
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : TM_6085 : A fatal error occurred at transformation [mplt_BC_ORA_ProductCategories_Resolve.EXP_W_ORA_PRODCUT_DS_TMP_INS_REJ], and the session is terminating.
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : TM_6085 : A fatal error occurred at transformation [mplt_BC_ORA_ProductCategories_Resolve.EXP_W_ORA_PRODCUT_DS_TMP_INS_REJ], and the session is terminating.
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : TM_6085 : A fatal error occurred at transformation [mplt_BC_ORA_ProductCategories_Resolve.Lkp_W_ORA_PRODUCT_DS_TMP], and the session is terminating.
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : TM_6085 : A fatal error occurred at transformation [mplt_BC_ORA_ProductCategories_Resolve.Lkp_W_ORA_PRODUCT_DS_TMP], and the session is terminating.
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : TM_6085 : A fatal error occurred at transformation [mplt_BC_ORA_ProductCategories_Resolve.SQ_W_ORA_PRODUCT_CATEGORIES_RESOLVE], and the session is terminating.
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : TM_6085 : A fatal error occurred at transformation [mplt_BC_ORA_ProductCategories_Resolve.SQ_W_ORA_PRODUCT_CATEGORIES_RESOLVE], and the session is terminating.
2013-02-27 15:28:21 : ERROR : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : TM_6085 : A fatal error occurred at transformation [mplt_BC_ORA_ProductCategories_Resolve.SQ_W_ORA_PRODUCT_CATEGORIES_RESOLVE], and the session is terminating.
2013-02-27 15:28:21 : DEBUG : (4696 | TRANSF_1_1_1) : (IS | BIA_IS) : node01_BIAPPS : DBG_21511 : TE: Fatal Transformation Error.
2013-02-27 15:28:21 : INFO : (4696 | WRITER_1_*_1) : (IS | BIA_IS) : node01_BIAPPS : WRT_8167 : Start loading table [W_ORA_PRODUCT_DS_TMP] at: Wed Feb 27 15:28:21 2013
2013-02-27 15:28:21 : INFO : (4696 | WRITER_1_*_1) : (IS | BIA_IS) : node01_BIAPPS : WRT_8333 : Rolling back all the targets due to fatal session error.
2013-02-27 15:28:21 : INFO : (4696 | WRITER_1_*_1) : (IS | BIA_IS) : node01_BIAPPS : WRT_8325 : Final rollback executed for the target [W_ORA_PRODUCT_DS_TMP] at end of load
2013-02-27 15:28:21 : ERROR : (4696 | WRITER_1_*_1) : (IS | BIA_IS) : node01_BIAPPS : WRT_8170 : Writer run terminated: Abort Session request received from the DTM
2013-02-27 15:28:21 : INFO : (4696 | WRITER_1_*_1) : (IS | BIA_IS) : node01_BIAPPS : WRT_8168 : End loading table [W_ORA_PRODUCT_DS_TMP] at: Wed Feb 27 15:28:21 2013
2013-02-27 15:28:21 : INFO : (4696 | WRITER_1_*_1) : (IS | BIA_IS) : node01_BIAPPS : WRT_8035 : Load complete time: Wed Feb 27 15:28:21 2013
LOAD SUMMARY
============
WRT_8036 Target: W_ORA_PRODUCT_DS_TMP (Instance Name: [W_ORA_PRODUCT_DS_TMP])
WRT_8044 No data loaded for this target
2013-02-27 15:28:21 : INFO : (4696 | WRITER_1__1) : (IS | BIA_IS) : node01_BIAPPS : WRT_8043 : ****END LOAD SESSION*****
2013-02-27 15:28:21 : INFO : (4696 | MANAGER) : (IS | BIA_IS) : node01_BIAPPS : PETL_24031 :
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [mplt_BC_ORA_ProductCategories_Resolve.SQ_W_ORA_PRODUCT_CATEGORIES_RESOLVE] has completed.
     Total Run Time = [1.109375] secs
     Total Idle Time = [0.500000] secs
     Busy Percentage = [54.929577]
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [mplt_BC_ORA_ProductCategories_Resolve.SQ_W_ORA_PRODUCT_CATEGORIES_RESOLVE] has completed.
     Total Run Time = [0.531250] secs
     Total Idle Time = [0.468750] secs
     Busy Percentage = [11.764706]
     Transformation-specific statistics for this thread were not accurate enough to report.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_ORA_PRODUCT_DS_TMP] has completed. The total run time was insufficient for any meaningful statistics.
2013-02-27 15:28:21 : INFO : (4696 | MAPPING) : (IS | BIA_IS) : node01_BIAPPS : CMN_1793 : The index cache size that would hold [5170] rows in the lookup table for [mplt_BC_ORA_ProductCategories_Resolve.Lkp_W_ORA_PRODUCT_DS_TMP], in memory, is [186000] bytes
2013-02-27 15:28:21 : INFO : (4696 | MAPPING) : (IS | BIA_IS) : node01_BIAPPS : CMN_1792 : The data cache size that would hold [5170] rows in the lookup table for [mplt_BC_ORA_ProductCategories_Resolve.Lkp_W_ORA_PRODUCT_DS_TMP], in memory, is [180224] bytes
2013-02-27 15:28:21 : INFO : (4696 | MANAGER) : (IS | BIA_IS) : node01_BIAPPS : PETL_24005 : PETL_24005 Starting post-session tasks. : (Wed Feb 27 15:28:21 2013)
2013-02-27 15:28:22 : INFO : (4696 | MANAGER) : (IS | BIA_IS) : node01_BIAPPS : PETL_24029 : PETL_24029 Post-session task completed successfully. : (Wed Feb 27 15:28:22 2013)
2013-02-27 15:28:22 : INFO : (4696 | MAPPING) : (IS | BIA_IS) : node01_BIAPPS : TE_7216 : Deleting cache files [PMLKUP22595_262151_0_588W64] for transformation [mplt_BC_ORA_ProductCategories_Resolve.Lkp_W_ORA_PRODUCT_DS_TMP].
2013-02-27 15:28:22 : INFO : (4696 | MAPPING) : (IS | BIA_IS) : node01_BIAPPS : TE_7216 : Deleting cache files [PMLKUP22595_3_0_588W64] for transformation [Lkp_W_USER_D_get_id].
2013-02-27 15:28:22 : INFO : (4696 | MAPPING) : (IS | BIA_IS) : node01_BIAPPS : TM_6018 : The session completed with [2] row transformation errors.
2013-02-27 15:28:22 : INFO : (4696 | MANAGER) : (IS | BIA_IS) : node01_BIAPPS : PETL_24002 : Parallel Pipeline Engine finished.
2013-02-27 15:28:22 : INFO : (4696 | DIRECTOR) : (IS | BIA_IS) : node01_BIAPPS : PETL_24013 : Session run completed with failure.
2013-02-27 15:28:22 : INFO : (4696 | DIRECTOR) : (IS | BIA_IS) : node01_BIAPPS : TM_6022 :
SESSION LOAD SUMMARY
================================================
2013-02-27 15:28:22 : INFO : (4696 | DIRECTOR) : (IS | BIA_IS) : node01_BIAPPS : TM_6252 : Source Load Summary.
2013-02-27 15:28:22 : INFO : (4696 | DIRECTOR) : (IS | BIA_IS) : node01_BIAPPS : CMN_1740 : Table: [SQ_W_ORA_PRODUCT_CATEGORIES_RESOLVE] (Instance Name: [mplt_BC_ORA_ProductCategories_Resolve.SQ_W_ORA_PRODUCT_CATEGORIES_RESOLVE])
     Output Rows [252], Affected Rows [252], Applied Rows [252], Rejected Rows [0]
2013-02-27 15:28:22 : INFO : (4696 | DIRECTOR) : (IS | BIA_IS) : node01_BIAPPS : TM_6253 : Target Load Summary.
2013-02-27 15:28:22 : INFO : (4696 | DIRECTOR) : (IS | BIA_IS) : node01_BIAPPS : CMN_1740 : Table: [W_ORA_PRODUCT_DS_TMP] (Instance Name: [W_ORA_PRODUCT_DS_TMP])
     Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
2013-02-27 15:28:22 : INFO : (4696 | DIRECTOR) : (IS | BIA_IS) : node01_BIAPPS : TM_6023 :
===================================================
2013-02-27 15:28:22 : INFO : (4696 | DIRECTOR) : (IS | BIA_IS) : node01_BIAPPS : TM_6020 : Session [SDE_ORA_ProductCategories_Resolve] completed at [Wed Feb 27 15:28:22 2013].
Regards
Naeem Akhtar

lbaert/Luc,
Thanks this worked with your suggestion
Thanks

SQL in ODI procedure truncated while execution

My repsoitory is upgraded from Sunopsisv3 to ODI 10.1.x . I was trying to execute the package . There is a procedure with a SQL in it. While executing it works fine sometimes and sometimes it errors out saying Syntax error or table alias not found .When i look into the logs i see that the query is truncated as a result it failed.During success the query looks fine.
It is behaving in a wierd way. Is there any solution to fix this issue.
Thanks,
Gupta.

Hi,
Try use #:
begin
select ename from emp where empid=#empno;
proc1(#empno);
end;
character '#' replace variable with value in the source
Edited by: Uthred on Sep 9, 2008 11:43 AM
Edited by: Uthred on Sep 9, 2008 11:43 AM

ODI - Logs purged while ETL is in progress.

Similar Messages

Maybe you are looking for