Error in crawl log "Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "
Hi
I get the following error in my crawl logs
"Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "
Because of this i suspect, the search results are not including those aspx pages marked as "Hide physical urls from search".
This error is not available in the another environment where the aspx pages are coming in the results.
Thanks
Joe
Hi Joe,
Greetings!
Reset the index and re-crawl. That usually clears it
If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
Probably you need to debug the BDC code that underlies the external content types.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/41a86c43-151d-47cd-af73-967a4c940611/lotus-notes-connector-error-while-crawling-lob-contents?forum=sharepointsearch
Please remember to click 'Mark as Answer' on the answer if it helps you
Similar Messages
-
Everytime when I perform a Full Crawl on the Central Administraion page, this error will appear and the crawl process will run into an infinite loop and nothing crawl success. I have tried delete and re-create the crawling content sources, start/stop
the search services but this error still appear.
Please help. Thanks a lot.
Error Message:
topicpages://
Error while crawling LOB contents.
( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.Net.WebException The request failed with HTTP status 404: Not Found.;
SearchID = EFE3FAA4-12C3-40AD-B410-51D6189FC720 )Tried scheduled an incremental every 10 minutes
Still getting error on crawling LOB contents. The incremental crawl ran into an infinite loop and nothing crawl success
Thanks for help.
Error Message:
topicpages://(servername)
Error while crawling LOB contents.
( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.Net.WebException The request failed with HTTP status 404: Not Found.;
SearchID = B801BC11-8138-453F-AB4D-AA4BE4F5B57A ) -
I have been trying sync my ipad to a new pc and I get this message after the sync fails:
"Attempting to copy to the disk "windows" failed. The device is not connected."
The device is connected, what is wrong here?This is a common problem that is most likely caused by files that are not marked to have proper read/write permissions.
To solve this problem, follow these steps.
1. Close iTunes.
2. Using the finder, Ctrl-click the folder that contains your music files, then select Get Info.
3. Ensure that the Owner is set to have Read & Write privileges. Choose to Apple to enclosed items…
Once you have modified permissions, fire up iTunes and try to sync your music again. If it throws the same error message and still doesn’t work, research more about permissions in Mac OS X, as there could be something else not right with the permissions of your music files. -
Schedules Error - Job execution failed because the user who scheduled this
Hi
I wonder if anyone can help
I have a report that I can deliver by email through the BI Publsiher front end without issue. However when I call the report to send by email through my oracle 11G Database, as the same BI User I get the following error message
"oracle.apps.xdo.servlet.scheduler.ProcessingException: Job execution failed because the user who scheduled this job has no more permission or priviledge to run the job."
Any suggestions?
Thanks
KevThe scheduler appears to be the culprit here so try the following:
1. Open the [repository_home]/Admin/Scheduler/quartz-config.properties file
2. Add the following entry:
org.quartz.threadPool.threadsInheritContextClassLoaderOfInitializingThread=true
3. Restart the environment (xmlpserver)
4. Rerun the report via the scheduler -
Error found in log file while installting OBIEE
hi everyone,
I am naveen anand. and im new to obiee.
when i am trying to instal obiee-Business Intelligence Suite Enterprise Edition in my windows machine. i tried looking to my log file and i found repeated error messge of same kind, i mean only one kind given below.
Install.product.install, com.installshield.product.actions.Files, err, ServiceException: (error code = -30016; message = "The process cannot access the file because it is being used by another process.
+(32)"; severity = 0)+
+STACK_TRACE: 22+
+ServiceException: (error code = -30016; message = "The process cannot access the file because it is being used by another process.+
+(32)"; severity = 0)+
+ at com.installshield.wizard.platform.win32.Win32FileServiceImpl.win32SetFileModified(Native Method)+
+ at com.installshield.wizard.platform.win32.Win32FileServiceImpl.setFileModified(Win32FileServiceImpl.java:115)+
+ at sun.reflect.GeneratedMethodAccessor217.invoke(Unknown Source)+
+ at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)+
+ at java.lang.reflect.Method.invoke(Unknown Source)+
+ at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)+
+ at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)+
+ at com.installshield.wizard.service.file.GenericFileService.setFileModified(GenericFileService.java:185)+
+ at com.installshield.product.actions.Files.setFileTimes(Files.java:1608)+
+ at com.installshield.product.actions.Files.install(Files.java:460)+
+ at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)+
+ at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5195)+
+ at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)+
+ at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)+
+ at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)+
+ at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4563)+
+ at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3758)+
+ at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)+
+ at java.lang.Thread.run(Unknown Source)+
other than this everything went right.
can it create a problem in future when i will be working on OBIEE??
can anyone tell why this error message came??
and best solution to resolve it..
and what problem may come because of it.
thanks in advance.Rather than asking for a possible I would ask if you have an actual problem after the installation. Errors in log files might be expected so you shouldn't worry unless something doesn't work as expected.
-
itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in
Have not changed any settings on my mac. Quit the application end of the day. The next day I went to start it and it won't open. Everytime I try to launch it, it won't open and I get this error message: The application itunes quit unexpectedly. The problem may have been caused by the libgnsdk_dsp.1.9.5.dylib plug in
-
Hi,
I have installed the following on my windows server 2012:
Sharepoint2013
Workflow Manager 1.0: installed and configured
Service Bus 1.0
Service Bus 1.0 CU Update 1
I'm now trying to install the CU2 of workflow manager but I'm getting the following error message in the log file:
[09/01/14 08:02:10] Starting process "C:\Windows\system32\..\sysnative\windowspowershell\v1.0\powershell.exe" -NoLogo -NonInteractive -NoProfile -WindowStyle Hidden -ExecutionPolicy RemoteSigned -File UnifiedWFHotfixUpgrade.PS1 -HotfixType "S"
-PackageType "server" -opcode "PatchBefore" -platform "x64" ...
[09/01/14 08:02:13] Process exit code is -1.
Start-WFHostUpgrade : Login failed for user 'UZuc7KmRZyM5zfaz7kEkjw=='.
At C:\ProgramData\Microsoft\E-Business Servers
Updates\Updates\Uninstall2902007\UnifiedWFHotfixUpgrade.PS1:499 char:5
+ Start-WFHostUpgrade -TargetWFVersion $TargetWFVersion
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : WriteError: (:) [Start-WFHostUpgrade], SqlExcept
ion
+ FullyQualifiedErrorId : WFServiceUpgradeFailed,Microsoft.Workflow.Deploy
ment.Commands.StartWFHostUpgrade
The reason why I need to install this update is to resolve the following error message I'm getting when I try to register workflow service:
PS C:\Users\Administrator> Register-SPWorkflowService -SPSite "http://tcorigli-d
ev01:48668" -WorkflowHostUri "http://tcorigli-dev01:12291" -AllowOAuthHttp
Register-SPWorkflowService : The remote server returned an error: (404) Not
Found.
At line:1 char:1
+ Register-SPWorkflowService -SPSite "http://tcorigli-dev01:48668"
-WorkflowHostUr ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...WorkflowService:
RegisterSPWorkflowService) [Register-SPWorkflowService], WebException
+ FullyQualifiedErrorId : Microsoft.SharePoint.WorkflowServices.PowerShell
.RegisterSPWorkflowService
PS C:\Users\Administrator>
Thanks & Regards,
TomiHi,
For a better troubleshooting, I suggest you do as follows:
1.Try to install Service Bus 1.1 before update CU2.
http://www.wictorwilen.se/issue-when-installing-workflow-manager-1.0-refresh-using-powershell
2.PowerShell 3.0 must be installed on the computer to be updated.
3.Check whether install Workflow Manager Client 1.0 on your computer.
4.Make sure you have administrative credentials on the computer.
If the issue still exists, you can also open a ticket to Microsoft Support to get more specific suggestions according to the actual scenario in your environment:
https://support.microsoft.com/?wa=wsignin1.0
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
Error 821 XI 3.0, while eamil getting an error format is not found!!!
In XI 3.0 When I goto SCOT and click on INT or SMTP then click "SET" from support address type window "Internnet is selected"
Its comes "output format for SAP documents" window and show some format like PDF, THM and TXT thats it its not show full format like "RAW, ALI, OBJ, OTF, SCR, URL" someting like that...
how to install thase format please help me becuase getting an error messages "connot convert nodes, parameters can't be found!" Error 821
Please help me
TravisWe have tried this with various level of J2SE without much luck and have also tried to load the .jar file manually using javaw. We have come to the conclusion that the .jar is in fact corrupted in some way.
And of course tried to clear the Java Cache on the client side ( using control panel ).
Thanks for the inputs - will keep you updated. -
Any help with this issue is greatly appreciated!
I'm having exactly the same problem.
iTunes will sync contacts, and calendars, etc to the iphone but no music to the iphone or my ipod.
In addition I have imported tracks not playing properly (they play for a couple of seconds, then skip to next track).
Major nightmare, I use my ipod for work. -
I updated iphoto 9.4.3 and now it will not allow me to burn pictures on disc. I am recieving the follwing message:
The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry.
I have tried to do a SMC Reset and PRAM reset and it still will not work. Before the update I was burning pics onto the same dics with no problem.
Any suggestions on what to do?
Thanks!Hey MGRUBE,
Thanks for the question. I understand you are experiencing issues with burning a disc. The following resource may help to resolve your issue:
Disc Burning Quick Assist
http://support.apple.com/kb/ht1152
Thanks,
Matt M. -
Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)
Hi there:
We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
Quick briefing:
Followed this instructions:
http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
* Created CRAWL RULE
- Used Domain Admin for content access ---> IS THIS WRONG?
- Domain Admin can access public folder thru Outlook Web Access (checked)
- Included all items in this path
PRINTSCREEN 1
* Added a content source for Exchange Server public folders
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
PRINTSCREEN2
* Did a FULL CRAWL
PROBLEM:
- Search results does not throw "correct data". Some items are not being found
CRAWL LOG is reporting: Error while crawling LOB contents
Detailed error message:
https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
Error while crawling LOB contents.
Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.InvalidOperationException An internal server error occurred.
Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
We thought it's a throttling issue / found possible solution:
http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
Tried it, still same Error messages, problem not resolved.
Any hints? Please advise.
With best regards
bostjancHi Bostjan,
From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
For throttling policy part
1.Execute the command for Set-ThrottlingPolicy
Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
For registry key part
1. Start Registry Editor (regedit).
2. Navigate to the following registry subkey:
\\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3. Right-click ParametersSystem, point to New, and then click Key.
A new key is created in the console tree.
4. Rename the key MaxObjsPerMapiSession, and then press Enter.
5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
The new value is created in the result pane.
6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
7. Right-click the newly created key, and then click Modify.
8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
9. Restart the Microsoft Exchange Information Store service.
If it still doesn’t help, please check ULS log for related error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Error while crawling LOB contents
Hello
I am trying to get the crawl to work on SharePoint but the full crawls never stops and when I stop it the crawl log has below.
topicpages://
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..: System.Net.WebException The request
failed with HTTP status 404: Not Found. )
I have been searching the net continuously and made sure the folders have the correct permissions etc
The longest I let the search go is 100 hours
Using:
Sharepoint 2013 Foundation
Server 2008 R2
Has anyone seen this before or have any ideas what to try and get this going correctly?
Cheers
JamesAlso below is what comes up in Event log when I start a full crawl
'Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Server Search
Date: 24/06/2014 10:24:53 a.m.
Event ID: 1400
Task Category: Crawler:Gatherer Service
Level: Warning
Keywords:
User: <domain>\SP-Search
Computer: <server>
Description:
Gatherer\CSS connector failed to connect to CSS net.tcp://<server>/5DA29F/ContentProcessingComponent1/ContentSubmissionServices/content
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Server Search" Guid="{C8263AFE-83A5-448C-878C-1E5F5D1C4252}" />
<EventID>1400</EventID>
<Version>15</Version>
<Level>3</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-23T22:24:53.874185700Z" />
<EventRecordID>67690</EventRecordID>
<Correlation />
<Execution ProcessID="1636" ThreadID="3284" />
<Channel>Application</Channel>
<Computer>**<server>**</Computer>
<Security UserID="S-1-5-21-3477241775-3255730575-1957110980-1562" />
</System>
<EventData>
<Data Name="string0">net.tcp://<server>/5DA29F/ContentProcessingComponent1/ContentSubmissionServices/content</Data>
</EventData>
</Event>' -
Lotus Notes connector: Error while crawling LOB contents
Hi all,
I am trying to configure Lotus Notes connector on SP search. We have successfully followed the Randy Rempel's blog on
test environment. No problem to search lotus notes content.
In production environment, we've followed the same procedure but we are facing the following problem. During the full crawl, the below error is thrown
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - Exception has been thrown by
the target of an invocation..: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail] An unexpected error occurred in the Lotus Notes protocol handler while processing the URL
We have forced Lotus Notes Connector to be more verbose, without success.
Any help will be appreciated
DavidReset the index and re-crawl. That usually claers it
If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
Probably you need to debug the BDC code that underlies the external content types.
can you Check the permission that you have set for the lotus notes domino databases? Was the content access account added to the local administrator group?
If this helped you resolve your issue, please mark it Answered -
Hi,
I created custom BDC Model using Visual Studio. In ReadList method i am getting data using Web Service call. Using this External Content Type (BDC Model) i created one external list and it is populating with data.
I created one new content source in search service application using this BDC Model and when crawled this content source i am getting the below error.
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Runtime.RuntimeException MethodInstance with Name 'ReadList' on Entity (External Content Type) with Name 'Entity1' in Namespace 'bcsex.BdcModel1' failed
unexpectedly. The failure occurred in method 'ReadList' defined in class 'bcsex.BdcModel1.EntityService1' with the message 'Could not find default endpoint element that references contract 'ServiceReference1.Service1Soap' in the ServiceModel client configuration
section.
I included the bindings and client end point configuration settings in web.config file located at
\\Inetpub\wwwroot\wss\VirtualDirectories\Port_Number, but still getting the same error.
Please help. Thanks a lot.The Issue resolved by including the bindings and client end point configuration settings in
machine.config file located at C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\ and also restarted the server after config changes.
Maybe you are looking for
-
Go to the Apps and it shows it as installed and gives the "Open" button, but selecting this does nothing. The icon is nowhere to be found so I cannot uninstall and try to re-install. Anyone encountered a similar problem?
-
Mail merge document has 4 decimal places when I click on the text box. The value was moved from a spreadsheet. Both documents have the format set to 2 decimal places. Why is it showing 4 when I click on the textbox?
-
Hi, I'm a novice in Cocoa Obj-C progamming. I'm working on a simple tabbed web browser for my college project. According to the Apple documentation, "WebKit Objective-C Programming Guide", every webview contains its own backForward list by default, u
-
Hi,I recently installed a WRVS4400N router on my home network. Prior to that I was using the wireless built into my FIOS router. I wanted something more secure so I went with the WRVS4400N. I turned off the FIOS wireless and am only using the cisco w
-
Hi all We have SRM 5.0 and we need add a new column in SOCO, the column that we need is the company code of the shopping cart. Are there any way to add this column?. Regards.