ODI not reading XML file

Hi All,
Im working on implementing Oracle PIP with ODI.
Im not able to access an XML file within ODI. The Physical architecture is set to the correct directory, filename etc.
It was working fine before until recently we restarted the agent & re-encoded the passwords for Supervisor & Master Rep accounts.
It now shows "table not found: ORA - account is locked" or "invalid username/password - login denied" error when I try to view the data of the datastores within the Model (whose source is the XML file).
Any thoughts?
Thanks,
Ruby

Does you XML file use an external database store ? Maybe the db password in that file wasnt changed

Similar Messages

Write Read XML Files not made in LabVIEW

I have an application that needs to be able to write and read xml files. My application needs to be able to save the files in such a format that an outside program can use the values saved in the xml file. On a system restart I need to be able to read in the values that were saved back into the program and populate the multicolumn list box it came from. My issue really is just reading it back in from the file.
I could create a way of writing the xml file with the information in the format needed for the other program. The problem really is, how do I handle reading in, and then populating controls with the information provided in the xml file with the xml file not in the LabView format.
The xml controls that have been provided by NI are not usable in this case.
Any suggestions or possible solutions would be greatly appreciated. Thank you for all of the help ahead of time.

Try LabXML.

Reading XML file from application server and put into internal table-4.6C

Dear All,
Is there any way of reading XML file from application server to SAP? I am using 4.6C. Function module SCMS_STRING_TO_XSTRING function module is not available. Please suggest.
Thanks and regards,
Atanu

Hi Atanu!
Simply use the XSLT transformation 'ID'.
FIELD-SYMBOLS <ls_result> TYPE ANY.
CREATE DATA lref_data TYPE (your_structure).
ASSIGN lref_data->* TO <ls_result>.
CALL TRANSFORMATION id
SOURCE XML xmlstr
RESULT result = <ls_result>.
"xmlstr" contains your XML file. Just read it into it via standard I/O operations. "<ls_result>" will contain your DDIC formatted content.
Best regards
Torsten

Read XML file from presentation server

Hi All,
I want read XML file from presentation server currently i am using GUI_UPLOAD fm . but it is reading some junk data.
DATA : BEGIN OF upl OCCURS 0,
 f(255) TYPE c,
 END OF upl.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = D:\XX.XML'
 filetype = 'BIN'
 TABLES
 data_tab = upl.
is there any other alternative.
Thanks
Swarup,

Hi Swarup,
Use method IMPORT_FROM_FILE of class CL_XML_DOCUMENT.
A sample code snippet :-
PARAMETERS: p_filnam TYPE localfile OBLIGATORY
DEFAULT 'C:\Documents and Settings\ssaha\Desktop\test.xml'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_filnam.
DATA: l_v_fieldname TYPE dynfnam.
l_v_fieldname = p_filnam.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = l_v_fieldname
IMPORTING
file_name = p_filnam.
START-OF-SELECTION.
TYPES:
BEGIN OF ty_tab,
name TYPE string,
value TYPE string,
END OF ty_tab.
DATA:
lcl_xml_doc TYPE REF TO cl_xml_document,
v_subrc TYPE sysubrc,
v_node TYPE REF TO if_ixml_node,
v_child_node TYPE REF TO if_ixml_node,
v_root TYPE REF TO if_ixml_node,
v_iterator TYPE REF TO if_ixml_node_iterator,
v_nodemap TYPE REF TO if_ixml_named_node_map,
v_count TYPE i,
v_index TYPE i,
v_attr TYPE REF TO if_ixml_node,
v_name TYPE string,
v_prefix TYPE string,
v_value TYPE string,
v_char TYPE char2.
DATA:
itab TYPE STANDARD TABLE OF ty_tab,
wa TYPE ty_tab.
CREATE OBJECT lcl_xml_doc.
CALL METHOD lcl_xml_doc->import_from_file
EXPORTING
filename = p_filnam
RECEIVING
retcode = v_subrc.
CHECK v_subrc = 0.
v_node = lcl_xml_doc->m_document.
CHECK NOT v_node IS INITIAL.
v_iterator = v_node->create_iterator( ).
v_node = v_iterator->get_next( ).
WHILE NOT v_node IS INITIAL.
CASE v_node->get_type( ).
WHEN if_ixml_node=>co_node_element.
v_name = v_node->get_name( ).
v_nodemap = v_node->get_attributes( ).
IF NOT v_nodemap IS INITIAL
* attributes
v_count = v_nodemap->get_length( ).
DO v_count TIMES.
v_index = sy-index - 1.
v_attr = v_nodemap->get_item( v_index ).
v_name = v_attr->get_name( ).
v_prefix = v_attr->get_namespace_prefix( ).
v_value = v_attr->get_value( ).
ENDDO.
ENDIF.
WHEN if_ixml_node=>co_node_text OR
if_ixml_node=>co_node_cdata_section.
* text node
v_value = v_node->get_value( ).
MOVE v_value TO v_char.
IF v_char <> cl_abap_char_utilities=>cr_lf.
wa-name = v_name.
wa-value = v_value.
APPEND wa TO itab.
CLEAR wa.
ENDIF.
ENDCASE.
* advance to next node
v_node = v_iterator->get_next( ).
ENDWHILE.
LOOP AT itab INTO wa.
ENDLOOP.
Regards
Abhii

Reading XML file using BAPI and then uploading that xml file data into SAP

I am getting a xml file from Java server. I need to take
data from this file using BAPI and need to upload into SAP using SAP.
Please tell me how to read XML files using BAPI's.

SDIXML_DATA_TO_DOM Convert SAP data (elementary/structured/table types) into DOM (XML
SDIXML_DOM_TO_XML Convert DOM (XML) into string of bytes that can be downloaded to PC or application server
SDIXML_DOM_TO_SCREEN Display DOM (XML)
SDIXML_DOM_TO_DATA
data: it_table like t001 occurs 0.
data: l_dom TYPE REF TO IF_IXML_ELEMENT,
 m_document TYPE REF TO IF_IXML_DOCUMENT,
 g_ixml TYPE REF TO IF_IXML,
 w_string TYPE XSTRING,
 w_size TYPE I,
 w_result TYPE I,
 w_line TYPE STRING,
 it_xml TYPE DCXMLLINES,
 s_xml like line of it_xml,
 w_rc like sy-subrc.
start-of-selection.
select * from t001 into table it_table.
end-of-selection.
initialize iXML-Framework ****
write: / 'initialiazing iXML:'.
class cl_ixml definition load.
g_ixml = cl_ixml=>create( ).
check not g_ixml is initial.
write: 'ok'.
create DOM from SAP data ****
write: / 'creating iXML doc:'.
m_document = g_ixml->create_document( ).
check not m_document is initial.
write: 'ok'.
write: / 'converting DATA TO DOM 1:'.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
 EXPORTING
 NAME = 'IT_TABLE'
 DATAOBJECT = it_table[]
 IMPORTING
 DATA_AS_DOM = l_dom
 CHANGING
 DOCUMENT = m_document
 EXCEPTIONS
 ILLEGAL_NAME = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
check not l_dom is initial.
write: / 'appending DOM to iXML doc:'.
w_rc = m_document->append_child( new_child = l_dom ).
if w_rc is initial. write 'ok'.
else. write: 'Err =', w_rc.
endif.
visualize iXML (DOM) ****
write: / 'displaying DOM:'.
CALL FUNCTION 'SDIXML_DOM_TO_SCREEN'
 EXPORTING
 DOCUMENT = m_document
 EXCEPTIONS
 NO_DOCUMENT = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
convert DOM to XML doc (table) ****
write: / 'converting DOM TO XML:'.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
 EXPORTING
 DOCUMENT = m_document
 PRETTY_PRINT = ' '
 IMPORTING
 XML_AS_STRING = w_string
 SIZE = w_size
 TABLES
 XML_AS_TABLE = it_xml
 EXCEPTIONS
 NO_DOCUMENT = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
write: / 'XML as string of size:', w_size, / w_string.
describe table it_xml lines w_result.
write: / 'XML as table of', w_result, 'lines:'..
loop at it_xml into s_xml.
 write s_xml.
endloop.
write: / 'end of processing'.
end of code
Hope this will be useful.
regards
vinod

Reading XML file using BAPI I must use adapters .

Reading XML file using BAPI and then uploading that xml file data into SAP using BDC.
I cant take file on to my Application server I am getting the file dynamically from other file server and I need to use BAPis to read data from XML file.please tell me what should be my Import,Export and Tables parameterrs should be.
Thanks

Hi,
Import, export and table parameters for BAPI is required, without that BAPI will not able to collect the data from XML. What you need to do is write a Zprogram and collect the data, store that data in internal table and call the BAPI by passing required parameters.
Different Scanarios:
1) Before calling a BAPI write some other program which collects the data from XML and create a UNIX file. Try to get the data from UNIX FILE
2) If you see the XML tags, data will be in side that tags, try to get the data from XML tags and store that data in one SAP table. You can use the BAPI by fetching the data from table
3)Create a table and store the data in the table. Use the table in SAP to extract the data.
BAPI won't work without any parameters, you have to pass some parameters then the BAPI will return some values.
Hope i am clear.
Thanks&Regards,
-Suresh Revuru

Problem while reading XML file from Aplication server(Al11)

Hi Experts
I am facing a problem while reading XML file from Aplication server using open data set.
OPEN DATASET v_dsn IN BINARY MODE FOR INPUT.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET v_dsn INTO v_rec.
WHILE sy-subrc <> 0.
ENDWHILE.
CLOSE DATASET v_dsn.
The XML file contains the details from an IDOC number , the expected output is XML file giving all the segments details in a single page and send the user in lotus note as an attachment, But in the present output after opening the attachment i am getting a single XML file which contains most of the segments ,but in the bottom part it is giving the below error .
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/SHPORD_0080005842.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
for all the xml its giving the error in bottom part , but once we open the source code and if we saved in system without changing anything the file giving the xml file without any error in that .
could any one can help to solve this issue .

Hi Oliver
Thanx for your reply.
see the latest output
- <E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
- <E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20110803</NTANF>
<NTANZ>080000</NTANZ>
<NTEND>20110803<The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/TEMP/notesD52F4D/~1922011.xml'.
/SPAN></NTEND>
<NTENZ>000000</NTENZ>
E1EDT13 with QUALF>003 and <E1EDT13 SEGMENT="1">
with <QUALF>001 having almost same segment data . but E1EDT13 with QUALF>003 is populating all segment data
properly ,but E1EDT13 with QUALF>001 is giving in between.

I have lost my photos/videos when i imported from my ipad 2 to my new imac latest version and it's not reading the files. I have downloaded iMac library manager and can see them. can someone shed some light please ?

i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
and it's not reading the files. I have downloaded iMac library manager and can see them. when i go back into iphoto i'm getting the following message :
Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
I don't know what to do - please help !!!!
can someone shed some light please ?

So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

UCCX Reading XML file hosted on IIS web server

hi guys,
i have a customer on CCX 8.5 environment and they have a .NET application running on an IIS web server. As part of this .NET application, the app produce an XML file.
My questions is
"Can CCX read XML file that is hosted externally on IIS web server rather than parsing the XML file on CCX document repository?"
All of the examples of XML parsing points to the XML file in document repository.
Any pointers to links and documentation/example on how to do this would be greatly appreciated.
If this is not achievable, if you could kindly suggest a different way of doing it too would be greatly appreciated.
Thanks in advance,
Daniel

Hi,
to be quite honest with you, I don't know anything about Sharepoint - so I am afraid I cannot help you with its XML editing capabilities. XML is just a well formed text file that follows some logical rules, so no additional application is required for editing, in fact, I always encourage everybody to use Notepad/Textpad/ to read and edit XML files. Of course, if it's not possible, you will find a great number of various user friendly XML editing applications.
A UCCX script will normally access an XML using the Create URL Document step and then, using the Get XML Document data step with the help of an XPath expression, will filter out the necessary information from the XML document.
The protocols used are standard and well known, including HTTP and XPath (and XML itself). So it does not really matter what kind of HTTP server serves the XML file, IIS is just an option.
Examples may be found in the Scripting guides for your particular UCCX version.
HTH
G.

I want to make a schedular which read xml files from a folder ,import in Indesign template then export as a pdf....

i want to make a schedular probably in Coldfusion or using javascript , which read xml files from a folder ,import in Indesign template then export as a pdf....

I don't think you understand: I want to open Dreamweaver and build a brand new site, then when I am done I want to host the dreamweaver site on the Business Catalyst platform. I dont want to use anything in BC to build the site, I just want to use the hosting platform. I do not want to import a BC site into dreamweaver or anything like that. I just want to use BC the same way I would use godaddy, or uhost or any other hosting provider. Based on your response you said that "of course its possible to build a BC site in Dreamweaver" I dont want to build a BC site, I want to build a Dreamweaver site and host it on the BC platform. Like I said before it doesnt seem like this is possible. As of now we can only build a new site in MUSE and integrate it into BC without using a BC template. Can you understand what I am saying. I DONT WANT TO USE A BC TEMPLATE, I WANT NOTHING TO DO WITH BC WHILE I AM BUILDING THE SITE WITH DREAMWEAVER, JUST LIKE MUSE DOES.

Load and Read XML file size more than 4GB

Hi All
My environment is Oracle 10.2.0.4 on Solaris and I have processes to work with XML file as below detail by PL/SQL
1. I read XML file over HTTP port into XMLTYPE column in table.
2. I read value no.1 from table and extract to insert into another table
On test db, everything is work but I got below error when I use production XML file
 ORA-31186: Document contains too many nodes
Current XML size about 100MB but the procedure must support XML file size more than 4GB in the future.
Belows are some part of my code for your info.
1. Read XML by line into variable and insert into table
LOOP
UTL_HTTP.read_text(http_resp, v_resptext, 32767);
DBMS_LOB.writeappend (v_clob, LENGTH(v_resptext), v_resptext);
 END LOOP;
 INSERT INTO XMLTAB VALUES (XMLTYPE(v_clob));
2. Read cell value from XML column and extract to insert into another table
DECLARE
CURSOR c_xml IS
(SELECT trim(y.cvalue)
FROM XMLTAB xt,
XMLTable('/Table/Rows/Cells/Cell' PASSING xt.XMLDoc
COLUMNS
cvalue
VARCHAR(50)
PATH '/') y;
 BEGIN
OPEN c_xml;
FETCH c_xml INTO v_TempValue;
<Generate insert statement into another table>
EXIT WHEN c_xml%NOTFOUND;
CLOSE c_xml;
 END
And one more problem is performance issue when XML file is big, first step to load XML content to XMLTYPE column slowly.
Could you please suggest any solution to read large XML file and improve performance?
Thank you in advance.
Hiko

See Mark Drake's (Product Manager Oracle XMLDB, Oracle US) response in this old post: ORA-31167: 64k size limit for XML node
The "in a future release" reference, means that this boundary 64K / node issue, was lifted in 11g and onwards...
So first of all, if not only due to performance improvements, I would strongly suggest to upgrade to a database version which is supported by Oracle, see My Oracle Support... In short Oracle 10.2.x was in extended support up to summer 2013, if I am not mistaken and is currently not supported anymore...
If you are able to able to upgrade, please use the much, much more performing XMLType Securefile Binary XML storage option, instead of the XMLType (Basicfile) CLOB storage option.
HTH

Code to read xml file

hi
code to read xml file in a java application

this not to your liking, eh?
simply demanding code like that will get you nowhere

FM to read XML files from Application server in ECC5.0

Hi All,
We need to pick up an XML file from Application server/FTP server. The requirement is to parse the XML file and process it to create material master. SAP provides standard function modules to read XML files.
Now we need to read the XML file contents of MM01 and upload into SAP Data Base through BAPI
I need to know about the Function modules to read XML files from Application Server and also about the FM's that will update the Date base tables with the data obtained form XML files.
Regards
Prathima

Parsing XML data:
http://help.sap.com/saphelp_nw04/helpdata/en/86/8280ba12d511d5991b00508b6b8b11/frameset.htm
or alternatively check out ABAP online help for "CALL TRANSFORMATION".
For creating the material master look at BAPI_STANDARDMATERIAL_CREATE.
Thomas

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

Reading XML file from UNIX

I am reading XML file from unix using :
FORM read_file USING p_name.
DO.
 READ DATASET p_name INTO WXML_LINE LENGTH LENG.
ENDDO.
Then I am using subroutine below where I get a short dump at
case X_NODE->get_type( ).
FORM get_data tables Y_CAPXML structure GV_CAPXML
 using value(x_node) type ref to if_ixml_node.
data: INDENT type i.
data: PTEXT type ref to if_ixml_text.
data: STRING type string.
data: TEMP_STRING(100).
case X_NODE->get_type( ).
 when if_ixml_node=>co_node_element.
 STRING = X_NODE->get_name( ).
 GV_NODETEXT = STRING.
 when if_ixml_node=>co_node_text.
 PTEXT ?= X_NODE->query_interface( IXML_IID_TEXT ).
 if PTEXT->ws_only( ) is initial.
 STRING = X_NODE->get_value( ).
 case GV_NODETEXT.
 when 'NIIN'.
 move STRING to GV_CAPXML-NIIN.
 when 'FED_x0020_STOCK_x0020_CLASS'.
 move STRING to GV_CAPXML-fed_stock_class.
 when 'DODIC'.
 move STRING to GV_CAPXML-dodic.
 endcase.
The text for the short dump is : STACK_STATE_NO_ROLL_MEMORY
Can someone please explain what is it mean.
Thanks.

May be this blog can help:
<a href="/people/r.eijpe/blog/2005/11/21/xml-dom-processing-in-abap-part-ii--convert-an-xml-file-into-an-abap-table-using-sap-dom-approach for Blog</a>
Sri

ODI not reading XML file

Similar Messages

Maybe you are looking for