ODI Operator not showing scheduled packages

Dear guru,
Comes to a question where.. i have done the necessary steps to update my schedule package upon update agent scheduling.
Upon leaving it overnight on weekends.. It is found that operator didn't show the processes performed hence on scheduler timetable shows the particular package that is running... with its min time to complete and max time to complete..
Just wondering .. what could have gone wrong...
Regards,
terri

Prior to the above question...
Now after looking thoroughly on the ODI operator session list..
On dates .. I do not see any thing running at all like normal..
when we expand today.. we would see the packages running even on manual interfaces execution it is not showing on operator..
And after expanding the Physical Agent i do see processes on scheduled packages but.. it looks as though it is all pending..
please advice on how am i able to fix this prob to get packages running as usual...
Urgent help or advices needed..
regards,
terri

Similar Messages

  • Display  of operations not showing in iw39

    Dear All ,
    I am facing one problem
    when I want to see list of operations for 1000 orders
    I go to iw39 list of orders is displayed
    Now I select all the orders & go to operation tab they are showing nothing blank
    We have two plants say When I put for one plant say X it is showing but when I put for Y plant it isshowing nothing
    Reagrds
    pratap

    Hi Pratap,
    Check if any settings made in OIWL.
    If everything is ok in OIWL with no reference to plant, then choose one Order from each plant and get it debugged by an ABAPer, it would help you.
    MLN Prasad

  • Opera not showing webpages on Russia

    I have 6680 with Opera (the free version that Nokia licensed) installed. Whenever I browse to a Russia site it seems to load the page but then shows blank.
    All English sites shows well.

    a small change - it doesnt show some english webpages too.
    It shows cnn, google....
    It doesnt show Operas website.

  • Discoverer Plus 10gR2 not show data when the script of view have package

    Hi my friends.
    I have a problem with discoverer plus, I don't know is a problem or I'm doing something wrong.
    I have a four views, the views containg in the SELECT stament and WHERE clause packages, example:
    SELECT d.price,
    d.total,
    d.min,
    d.mx,
    TO_CHAR (SYSDATE, 'q') quarter,
    d.fid,
    k_xdcd_qry.f_xdc_obt_price (d.prod, d.id) --> package
    k_xpxpd_qry.f_xpeds_salary_ca_u (
    d.prod,
    d.id) xp --> package
    FROM px_prices_proc c,
    xp_sla_max d,
    xmp_sla_puc b
    WHERE a.prod = b.prod
    AND a.id = b.id
    AND a.prod = k_xps_tools.f_obt_prod --> package
    When I used the views on discoverer plus for construct the report, when execute the query not show data.
    Appreciate it if you could help or tell me I'm doing wrong or does not support Discoverer Plus package execution.

    Hi Tux,
    This appears to be a grant issue. Apparently, you have granted execute with respect to this package to the EUL owner or the view would not have compiled. If you have not given EUL owner the grant option, I would recommend doing this as well.
    This appears to be an Oracle APPS EUL (tell me if I am wrong). If this is the case, it goes without saying that APPS will need to be granted the execute privilege.
    Also, by default, a stored package executes with the privileges of its owner. If your custom package was designed this way, are the objects which it references received the appropriate grant? I assume you tested this, but I am concerned that the line, a.prod = k_xps_tools.f_obt_prod, in the where clause could be resulting in the Null set being returned.
    Patrick

  • Sales order Schedule line not showing in prod. order

    Hi
    I am using Make-to-order production. In my production order i can able to see the sales order number, item number but not able to see the schedule line number. It is showing zero. But in table VBEP table when i checked, system gives the sales order number (eg.1511632), item number  (10) and schedule line number (0001).
    Why in production order screen and AFPO table i am not getting schedule line number(field name-KDEIN).
    Regards
    Ganesh M

    Hi,
    When an item has more than one schedule line, the system automatically assigns a unique number to each line. The number is displayed in the details screens for schedule lines.  The schedule line number serves internal purposes and does not, for
    example, determine the sequence of schedule lines in the overview screen. The schedule lines on the overview screen are sorted by date.
    Please go to Sale order view from MD04, Click on Item no. and go to schedule line tab page, now you can see the line items and if you want to see in detail click each line item, it will show line item number clearly.
    Regards,
    Santhamoorthy

  • A div in a site am developing is not showing in firefox but shows on all the other browsers (chrome, safari, opera and explorer), can anyone help?

    i am developing a site and i used divs in making the arrangements.
    all other divs on the page shows but on particular one does not show.
    i gave all the divs a border with a red color, all the other browsers(explorer, opera, chrome and safari ) shows the divs with the colors but firefox does not even show the red color

    Can you post a test case demonstrating the problem? It doesn't need to contain confidential content or active links. (This forum doesn't handle raw HTML very well, so I don't recommend pasting code here unless you convert your angle brackets to HTML entities.)

  • Data manager package log does not show Global variables!!

    Hello Experts,
    We are using BPC 10 sp14 Microsoft version with SQL Server 2008 R2. We are seeing an issue where datamanager package log does not show the Global variables defined in package script whereas in BPC 7.5 Global variable were visible in package log.
    Please let us know is this behavior changed in BPC 10?
    Below is the package script having Global variables and Package log not showing any of them.
    Thanks & Regards,
    Rohit
    Package Script:
    Package Log:

    Hi Ergin,
    As far as I remember it's by design...
    Vadim

  • HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system

    HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system
    Please help, if any one knows any solution.

    Hi @Firoskhan,
    Welcome to the HP Forums!
    I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
    Hope this helps!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Manually Installed Agent is not showing up in the Operations Manager Console Under Pending Management.

    Hi Community,
    I submitted this question because I'm a bit stuck with SCOM 2012 R2, I'll try to explain briefly what is happening right now in my environment,  we have a DEV SCOM Deployment in which all the roles are installed in a single server, this servers is a
    VMware machine running Windows Server 2008R2.
    The Initial installation of the SCOM Operations Manager and all the other components was not performed by me but by a co-worker, unfortunately he doesn't remember much about the initial configuration. So i had to pickup where he left things about a year
    ago, neither of us are SCOM experts, and we have almost no previous experience with previous versions of this application.
    Now the problem that I'm facing is the following, all the DEV Servers are Domain Controllers and one of the indication within the "Guide for System Center Management Pack for Active Directory for Operations Manager 2012" states the following
    Configuration
    Supported?
    Agent-less monitoring
    No
    After my first review I notice that our servers were being monitor by agent-less mode and given the above statement from the Operations Guide the only way that we could ever get those domain controllers monitor by SCOM would be by installing the agent on
    each server, so I read somewhere (Can't remember where) that in order to install the agents in all the servers I should first remove them from the Agent-less node, which I did. Then I tried to use the discovery wizard to get the agent install in all of them
    but it didn't matter how many times I try the servers never show up.
    I read in a Tech Net Article that you had to modify the security settings so SCOM would let me decide if I wanted to approve it or not.
    --> http://technet.microsoft.com/en-us/library/hh212853.aspx
    I performed the suggested steps from the article but still the servers were not showing up, not even if I run the Discovery wizard, so I decided to go and perform the installation manually in a couple of servers I was able to install the agent in one of
    the Domain Controllers, I configured the agent to use a service account that has Domain Admin rights. An hour after I installed the agent I went back to the Operations Console Manager and I check under Pending Action but the Server was not showing up. So i
    went back to the Internet to try to find out if someone else had experience the same problem, and in one website some mentioned that if the servers were not showing up it was probably because they were still register in the SCOM Database, now I have no idea
    of how i can check that or How can i remove them from there to have them available again, but what troubles me the most is that even after i installed the agent manually the server were not being recognize.
    I went to the Event Viewer and I found one particular event that caught my attention, see below :
    Log Name:      Operations Manager
    Source:        Health Service Modules
    Date:          6/12/2014 12:48:19 PM
    Event ID:      11551
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      MyManagementServer
    Description:
    Computer verification failure for Machine Name: MyManagementServe is 0x800706BA. The RPC server is unavailable.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Health Service Modules" />
        <EventID Qualifiers="49152">11551</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-12T16:48:19.000000000Z" />
        <EventRecordID>1945680</EventRecordID>
        <Channel>Operations Manager</Channel>
        <Computer>MyManagementServer</Computer>
        <Security />
      </System>
      <EventData>
        <Data>MyManagementServe</Data>
        <Data>0x800706BA</Data>
        <Data>The RPC server is unavailable.</Data>
      </EventData>
    </Event>
    Not sure if this is related to the problem that I'm facing right now, but , I make sure that the RPC Services were running and also the related dependencies too. There's no Firewall enable in any of the servers and DNS seems to be working properly.
    Ports 135 / 5723 are open and listening so since I ran out of ideas, I would like to know if some of the experts in this field could perhaps give me some guidelines.
    There's one caveat that I haven't mention yet and that is related to SQL, I checked and my user just has read access to SQL i'm not sure if that could affect this but i think is worth mentioning.
    My main goal is to have all the servers showing up in the Operations Manager Console.
    So thanks all in advance !
    Oscar Loria

    So you can ping and nslookup from your ms to these agents and vice versa right?  I wouldn't do a manual install, I would push the agent from the management server.  You can uninstall the agent manually, or use cleanmom to get rid of them.  Then
    do an install from the console.  When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
    From Holmans post on this:
    e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    The MOM Server could not execute WMI Query "(null)” on 
    computer “servername.domain.com” 
    Operation: Agent Install 
    Install account: DOMAIN\account 
    Error Code: 800706BA 
    Error Description: The RPC server is unavailable.
    8004100A 
    800706BA
    1.  Ensure agent push account has local admin rights 
    2.  Firewall is blocking NetBIOS access.  If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed.  We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.  
    3.  Inspect WMI service, health, and rebuild repository if necessary 
    4.  Firewall is blocking ICMP  (Live OneCare) 
    5.  DNS incorrect 
    http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
    Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • The 'package' feature is not showing up in Illustrator CS6 (It says its upto date at version 6.0.4).

    Can someone asist with what this, since Adobe are to busy to provide support???
    The 'package' feature is not showing up in Illustrator CS6 (It says its upto date at version 6.0.4).
    Any help appreciated.
    Thanks

    Only creative cloud subscribers get the new features. If you were a Cloud subscriber your version would be 16.4.0 not 16.0.4.

  • My internal drive is NOT showing up in the event library in Final Cut X.  I am also getting a "The operation couldn't be completed. Cannot allocate memory" Any ideas? I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8

    My internal boot drive is NOT showing up in the Event Library in Final Cut X. My external raid drive is showing up.
    I am also getting error message "The operation couldn’t be completed. Cannot allocate memory"  when attempting to create a new "event".   Any ideas?
    If I had a application disk, I would unistall and reinstall FCPX.  I am assuming there is a way do do this without a disk - just have not been able to easliy find out how.
    I am using an IMAC Core i7 with 8GB memory, OS version 10.6.8
    Thanks

    Well it did NOT work.  Here is a screen capture as FCPX loads showing the drive while it loads. Then when it is loaded, NO drive showing up in the Event Library ( I have turned off the external drive).
    ANY ideas . . . .  Anybody . . . .  APPLE?

  • Event not showing up in editor but appears in package contents

    I have a weird scenario where one of my events is not showing up in a library. I have a simple library with the following events:
    Interviews
    B Roll
    Edits
    When I open final cut, I only see the B-Roll and Interviews event. The Edits one is missing. When I right click on the library in my finder and select show package contents, I can see all 3 events. No clue why one isn't showing up. 
    I tried renaming it. I tried setting up a new library and copying over. Neither worked.
    Any suggestions? 

    What happens when you open package contents and click on "edits"? Does it havea  filder that says "original media" and when you click on that one can you see video clips?

  • Schedule agreement not showing in MD04

    Hi All
    We have a schedule agreement created and its not reflecting in MD04. According to the thread i changed the avl check to 02.
    But its still not showing in MD04. So my question is do I have to do any other thing so that the avl chk change will get affected for same schedule agrmnt or I have to create a new one so that it will show in MD04.
    Thank You.

    First you need to identify what schedule line category is flowing in your sale order.  Normally, this would be CP.  So next go to VOV6, select the schedule line category and execute.  There tick the box for "Req./Assembly"
    thanks
    G. Lakshmipathi

  • Resource ( Room ) not showing up under Scheduling Assistant as an Attendee ?

    Hi All
    Hope someone can guide me here with two wierd issues I'm having, maybe something I'm not getting it.
    Problem 1 :
    Client = Outlook 2010, Server = Exchange 2010
    A users (the organizer of a meeting) can see the resource she is booking as an attendee under her own scheduling assistant, but if you open the appointment in the calendar of the resource itself, and you check the Scheduling Assistant, the room
    ( itself ) does not show up as an attendee.
    However - if you book the appointment from the resource calendar - the resource shows up as an attendee for all those invited.
    Problem 2 : 
    Referring to Problem 1 - One of the attendees accepts the meeting request and the user sees the acceptance message arrive in her mailbox, however - when she checks the tracking status - it shows the response as "none" ?. The auto acceptance by the resource
    shows "Accepted" which is correct.
    Any help is appreciated.
    Thanks

    Hi,
    In Exchange 2010, you can use
    Get-CalendarProcessing –Identity <roommailbox> command to the status of the ‘AutoProcessing’ parameter. The default setting is AutoUpdate, whilst the other available option is None. The setting of AutoUpdate means that
    the Calendar Attendant is used on the resource mailbox, which itself means that new meeting requests will be marked as tentative on the resource mailbox calendar.
    To make the organizer get the notification of accept, you can use the following command to configure:
    Set-CalendarProcessing –Identity <roommailbox> –AutomateProcessing AutoAccept
    Hope it helps.
    Thanks
    Sophia Xu
    TechNet Community Support

  • Opera 9: Dates not showing in email [SOLVED]

    I notice that, when reading mail in Opera 9 under Arch, the Sent column displays no dates whatsoever. This occurs whether I use the Arch supplied binary, or use the downloaded binary obtained from the Opera web site. This only occurs under Arch. That is, dates show up fine under other distros.
    Anyone able to dupe this?

    So far, the other distros on which I tested Opera are Fedora Core 5 and Meps 6. Neither of them cause this problem in Opera, so I can only assume it's an interaction between Arch and Opera, not Opera itself. On my Arch box, I tested Opera under KDE and Xfce-svn, and in both environments, the problem arises.

Maybe you are looking for