Display of operations not showing in iw39

Dear All ,
I am facing one problem
when I want to see list of operations for 1000 orders
I go to iw39 list of orders is displayed
Now I select all the orders & go to operation tab they are showing nothing blank
We have two plants say When I put for one plant say X it is showing but when I put for Y plant it isshowing nothing
Reagrds
pratap

Hi Pratap,
Check if any settings made in OIWL.
If everything is ok in OIWL with no reference to plant, then choose one Order from each plant and get it debugged by an ABAPer, it would help you.
MLN Prasad

Similar Messages

30 inch Apple Cinema Display-system prefs not showing native resolutions

The 30 inch Apple Cinema Display, seems to be working fine with the mac pro, but when I try to hook up the 2009 mini, the display preferences do not show the mini's native resolution of 1920x1200. The maximum it shows is 1280x800, and only gives a few other choices. This mini had once been attached to a TV monitor, so I am wondering if that has something to do with the lack of choices in the system preferences. Does anyone have any ideas on how to get the system preferences to display the correct info so that I can adjust the resolution ?
Thanks

Being compatible with the 24-inch Cinema Display and being able to use it at resolutions higher than 1280 by 800 doesn't necessarily mean that it can drive the 30-inch Cinema Display at its full resolution. You need to use a dual-link DVI connection as stated above.
(62751)

Edit/Display form does not show site columns after upgrade

https://social.technet.microsoft.com/forums/sharepoint/en-US/580111d4-72ca-4193-87ab-1dfd6082fa88/document-set-library-column-not-showing-up-on-edit-form
Hi all,
I don't think this is related to the above question, but the linked "solution" is as good as I can come up with, however it looks like its possible that ALL the libraries in the collection are suffering the same situation...
WHATS HAPPENING:
our site was migrated to 2013 from 2010 from 2007 and is running in compatability mode around 6-18 months ago. I'm pretty sure the old system is gone too - database backups might be obtainable... not sure.
There are a bunch of "site columns" that are used consistently across the collections libraries (there seems to be a general avoidance of "content types", don't ask me why, I don't know, I also don't know what would be involved in moving
them all to content types as many of the sites "views and webparts" use the content type columns to surface things all over the place, so I suspect it would be a big job), but folks have recently noticed that some documents are missing from various
pages (webparts that are gathering documents from these columns values).
But the problem is that it seems that since the update most (all?) of the document libraries NO LONGER enforce the requirement and litterally only show "name*", and "title" in display and edit properties...
Any ideas on how to get things back to showing the "proper" forms (I can only guess what this was from documentation and screenshots and general guessing based on the "commonness" of the columns in question)? Or is there a way to merge
or migrate "columns" to content types in some way that is either "collection wide" or non-breaking?
ANY assistance would be greatly appreciated!

So just to be sure are you saying that '2010 compatabilty mode' is causing these issues?
Just to be SUPER clear from my end this is what I'm seeing as an example;
For a collection
with site columns
many but not all lists
many but not all list items
--> are missing valid data in the site columns that have been registered for that list.
sample:
name          modified by    doctype     department
item1.docx   username   <blank> <blank>
item2.docx   username    WorkInstruction    Planning
if you click "edit properties" you are presented with ONLY the (I'm guessing) content types fields (eg: for Document you get Name and Title) and NONE of the other fields that should be specified.
However if you hit "save" you can see that the data in these fields returns to the "list view" (however it does not re-enable these fields from being active in the View/Edit properties pages).
Is this something that can be fixed? Or are you saying that we need to backup the DB and restore to a FULL version (not in compatability mode) of SharePoint2013? Or are you saying we need to revert to our PRE update backup and do something?
Its been many months since thsi upgrade was done and the system has changed a lot, so you can imagine we are reluctant to loose much of these changes...
Bazinga!

ODI Operator not showing scheduled packages

Dear guru,
Comes to a question where.. i have done the necessary steps to update my schedule package upon update agent scheduling.
Upon leaving it overnight on weekends.. It is found that operator didn't show the processes performed hence on scheduler timetable shows the particular package that is running... with its min time to complete and max time to complete..
Just wondering .. what could have gone wrong...
Regards,
terri

Prior to the above question...
Now after looking thoroughly on the ODI operator session list..
On dates .. I do not see any thing running at all like normal..
when we expand today.. we would see the packages running even on manual interfaces execution it is not showing on operator..
And after expanding the Physical Agent i do see processes on scheduled packages but.. it looks as though it is all pending..
please advice on how am i able to fix this prob to get packages running as usual...
Urgent help or advices needed..
regards,
terri

Movement Type data is not Showing in IW39 tcode

Hi,
We run the T.Code IW39 for Single Plant...Output showing correctly....
But after select whole output, we goes in Environment --> Goods Movements path...but after this, No objects were selected..even i select all the output comes after execution...
For other Plant, movement type data is coming.... Please help me out of this...
Regards..

Hi,
'No objects were selected' status message appears when you have not selected the order against which any goods movement have taken place. may be with your other plant there are few orders against which the goods movemements have been recorded in the system.
you can better be ensured by selecting the particular order against which goods movement have been carried out.
Regards,
Lucky.

External (outside display clock) will not show

I upgrade my operating system on Blackberry.com. Now the external display on the flip is the t-mobile logo. I tried fixing it in the "clock settings" under "clock face," but that didn't do it. Does anyone have any ideas how to change it back to the clock?
Solved!
Go to Solution.

You omitted BB attachment services when you installed the up grade, use the desktop manager to install it and the clock will return.

My display preferences does not show detect displays or the arrangement button

I have a late 2011 macbookpro (15") running OSX 10.8.2 (mt. lion). My display preferences screen does not have the arrangements button or the button to detect displays. Is this a bug in mt. lion? How do I fix this? I want to use my hdtv (samsung 32") as a second display.

Hi John,
Thanks for your reply and update and for going through that article. I'm glad to hear the issues have partially resolved. For the continued issues, particularly the performance issues with the MacBook, it sounds like a different direction may be warranted. Due to the nature of that issue you may find more information by using another one of Apple's support resources:
http://www.apple.com/support/contact/
Take care,
- Ari

Z10 Call Display from Contact - Not Showing Company Info

From the previous versions of Blackberry's OS, whenever I would receive a phone call from a contact in my phone, the name of the Contact and their Company (as I entered it) would show up on the screen. Now, it only shows the name and then has the number below. I meet a lot of people and the Company reference helped me understand who was calling and for what. Is there a way to have it so when someone calls, the name, company and phone number as in BB7.

This feature is an absolute must. Driving me crazy not seeking the company name of callers. I have 17 Tony's and now have no idea who is calling. This needs a fix ASAP!

Why in Displays does it not show my resolution options in Display Settings

I have a Panasonic 42" Viera flatscreen. I usually hook up my Mac Pro to it, the screen changes a bit and resizes things in weird ways, and sometimes my background switches to a new background for whatever reason.... Now, I appear to be stuck like this, I can't even change the resolution of my display anymore... there's just NO option to do so in Display Settings... at all. I'm not sure why, I created a new account, but it's frozen like that on the new account too, I can't switch back, and now when I re-plug my HDMI cord into the computer, it just registers absolutely nothing at all... and it doesn't connect to the TV.
What the **** is wrong with my BRAND NEW, came in the mail a week ago MacBook Pro? lol.
Thank you.

Hello OOCCULTRecords,
First I'd recommend resetting your Mac's PRAM if you haven't done so already.
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
The following article provides some additional troubleshooting that may help get your TV working correctly with your Mac.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

Opera not showing webpages on Russia

I have 6680 with Opera (the free version that Nokia licensed) installed. Whenever I browse to a Russia site it seems to load the page but then shows blank.
All English sites shows well.

a small change - it doesnt show some english webpages too.
It shows cnn, google....
It doesnt show Operas website.

FS10N GL Balances not showing line item details

Hi Expert,
i am unable to see the posted document in FS10N. i ve check the Button in FS00 Line Item display.. and save it.
again i did but FS10N display line item not showing .. see the error message below.
No items selected (see long text)
Message no. MSITEM033
Diagnosis
No line items meeting your selection criteria could be read. This could be for the following reasons:
1. No corresponding items have been posted.2. You are not authorized to display this data.3. The items have already been archived.4. Migration from classic General Ledger Accounting to new General Ledger Accounting: In migration phase 1, postings are only made to the account for the non-leading ledger

Big hello for you too my friend My 2 babies are taking all my attention! I am missing my old times here!
See, you have to understand when you have posted your GL account in 2013 you had only balance information stored. It means you have no data stored in table BSIS. When you activated Line item display this issue stands.
You won´t create entries in BSIS if you check that flag. Thus you only will have items from now on.
Have a test. Post new entries and check. they will appear.
Check also
LINEITEMS MISSING IN FBL3N AND FS10N
Best Regards!

Custom header name does not show in ALV...

Hello Experts,
I am using custom column names for my ALV display but when I display it does not show
the title I specified. For example, one of my columns which is 'AMOUNT' has a custom name
which is 'YTD AMOUNT'. But how come it still shows 'AMOUNT' in my header? I am using
cl_salv_table for my ALV. Below is my code:
TRY.
        cl_salv_table=>factory(
          EXPORTING
            list_display = 'X'
          IMPORTING
            r_salv_table = lcl_table
          CHANGING
            t_table      = gt_output ).
      CATCH cx_salv_msg.                                "#EC NO_HANDLER
    ENDTRY.
    lcl_functions = lcl_table->get_functions( ).
*   Set all standard ALV functions
    lcl_functions->set_all( abap_true ).
    lcl_columns = lcl_table->get_columns( ).
    lcl_columns->set_optimize( abap_true ).
*   Set display to striped pattern
    lcl_display = lcl_table->get_display_settings( ).
    lcl_display->set_striped_pattern( cl_salv_display_settings=>true ).
*/Set column names
    TRY.
        lcl_column ?= lcl_columns->get_column( 'DESCRIPT' ).
        lcl_column->set_medium_text( text-h01 ).
        lcl_column->set_long_text( text-h01 ).
        lcl_column->set_output_length( '40' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'BUKRS' ).
        lcl_column->set_medium_text( text-h02 ).
        lcl_column->set_long_text( text-h02 ).
        lcl_column->set_output_length( '12' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'KHINR' ).
        lcl_column->set_medium_text( text-h03 ).
        lcl_column->set_long_text( text-h03 ).
        lcl_column->set_output_length( '17' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'KOSTL' ).
        lcl_column->set_medium_text( text-h04 ).
        lcl_column->set_long_text( text-h04 ).
        lcl_column->set_output_length( '10' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'AUART' ).
        lcl_column->set_medium_text( text-h05 ).
        lcl_column->set_long_text( text-h05 ).
        lcl_column->set_output_length( '04' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'KTEXT' ).
        lcl_column->set_medium_text( text-h06 ).
        lcl_column->set_long_text( text-h06 ).
        lcl_column->set_output_length( '20' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'AUFNR' ).
        lcl_column->set_medium_text( text-h07 ).
        lcl_column->set_long_text( text-h07 ).
        lcl_column->set_output_length( '12' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'ACTUAL' ).
        lcl_column->set_medium_text( text-h08 ).
        lcl_column->set_long_text( text-h08 ).
        lcl_column->set_output_length( '10' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'COMMIT' ).
        lcl_column->set_medium_text( text-h09 ).
        lcl_column->set_long_text( text-h09 ).
        lcl_column->set_output_length( '10' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'TOTAL' ).
        lcl_column->set_medium_text( text-h10 ).
        lcl_column->set_long_text( text-h10 ).
        lcl_column->set_output_length( '10' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'BUDGET' ).
        lcl_column->set_medium_text( text-h11 ).
        lcl_column->set_long_text( text-h11 ).
        lcl_column->set_output_length( '15' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'AMOUNT' ).
        lcl_column->set_medium_text( text-h12 ).
        lcl_column->set_long_text( text-h12 ).
        lcl_column->set_output_length( '15' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'AGE' ).
        lcl_column->set_medium_text( text-h13 ).
        lcl_column->set_long_text( text-h13 ).
        lcl_column->set_output_length( '15' ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
*/Set aggregations
    TRY.
        lcl_aggregations = lcl_table->get_aggregations( ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'ACTUAL' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'COMMIT' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'TOTAL' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'BUDGET' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'AMOUNT' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_aggregations->add_aggregation( 'AGE' ).
      CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
    ENDTRY.
*/Hide columns
    TRY.
        lcl_column ?= lcl_columns->get_column( 'SETNAME' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'TXT' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'BUDAT1' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'COMMIT' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'ACTUAL' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'BUDAT2' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'ASTNR' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'AVAIL' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'CTRDIV' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    TRY.
        lcl_column ?= lcl_columns->get_column( 'CTRORD' ).
        lcl_column->set_visible( if_salv_c_bool_sap=>false ).
      CATCH cx_salv_not_found.                          "#EC NO_HANDLER
    ENDTRY.
    lcl_events2 = lcl_table->get_event( ).
    CREATE OBJECT lcl_handle_events.
    SET HANDLER lcl_handle_events->on_link_click FOR lcl_events2.
    SET HANDLER lcl_handle_events->on_top_of_page FOR lcl_events2.
    lcl_display_settings = lcl_table->get_display_settings( ).
    lcl_table->display( ).
Also, my top of page only display if use LIST display but when I use GRID, it does not show.

Thanks anyways...

LSMW - Read Data not showing in Converted Data

Hi,
I am using LSMW to load data from a flat file (via recording). I have it working except I have one issue. When I display the data in read data all fields are showing. No errors popup when I select convert data. When I select display converted data the last few fields are missing. Any ideas why or how to fix this?
Any help is appreciated as I do not know how to proceed.
Thanks,
Annette
Edited by: Annette Ameel on Dec 4, 2008 5:37 PM

HI Bush,
Currently I am also facing the same problem. In "display read data" it is showing all the field values. No error msg in "convert data". But only 2 fields are displaying in "display converted data". not showing any values in rest of the fields. Kindly suggest me how you fixed this problem

Issue regarding LSMW, not showing all records after Read Data

Dear Experts,
Plz help.. I need to configure a LSMW for ROH material.. so I made recording, n then create a structure.. accordingly.
the problem is.. at the time of reading data from .txt file.at the step of Display Read Data it showing only 50 records, rest are not displaying.. but not showing any error.. so my question to our expert that is their any limitations for reading data... if their.. then how could it be elasticated...
plz suggest..
regards,
sandy

the read step has a selection screen where you can define from which to which record you want read.
make sure this selection is empty for a test.
Further check if your source file has more than 50 records.
then make sure that you really read this source file and not any other version (check path and file name in step 7 of LSMW)

Opera 9: Dates not showing in email [SOLVED]

I notice that, when reading mail in Opera 9 under Arch, the Sent column displays no dates whatsoever. This occurs whether I use the Arch supplied binary, or use the downloaded binary obtained from the Opera web site. This only occurs under Arch. That is, dates show up fine under other distros.
Anyone able to dupe this?

So far, the other distros on which I tested Opera are Fedora Core 5 and Meps 6. Neither of them cause this problem in Opera, so I can only assume it's an interaction between Arch and Opera, not Opera itself. On my Arch box, I tested Opera under KDE and Xfce-svn, and in both environments, the problem arises.

Display of operations not showing in iw39

Similar Messages

Maybe you are looking for