OEM is not multi-screen friendly using Windows 2000 / Matrox

Using Matrox Dual-Head support for multi-screen (extended desktop) on Windows 2000, Oracle Enterprise Manager does not show menu dropdowns if the OEM window is moved of the primary desktop screen.

I've been seeing a similar problems for some time now
with my multi-monitor setup under windows2000 - and Jdeveloper
- maybe this fix will be good for OEM too?
(my secondary monitor is on the right hand side)
There is a known JDK bug with menus in this environment
http://developer.java.sun.com/developer/bugParade/bugs/4647105.html
"JMenu layout incorrect on dual Monitor systems on secondary monitor"
Which is fixed in JDK 1.3.1_04
So, to exploit this in Jdeveloper, you can
change the used JDK version. I downloaded the JDK from sun
and installed it in the default location of c:\jdk1.3.1_04
Then I modified this line in jdev.conf
SetJavaHome c:\jdk1.3.1_04
And releaunched jdeveloper: (ignore the warning box
about OJVM being absent). To verify that the JDK switch
worked, use help-about to see the JDK version
This fixed the problem for me with Jdeveloper 9.0.2
and my development build of 9.0.3.
I think that Jdeveloper 9.0.3 will ship with
this version of the JDK.
regards Karl McHorton (Oracle JavaTools Development)

Similar Messages

My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7.

My lap top name is hp pavilion dv 600. and my micriophon is not working . i am using windows 7. before that i was using widows vista. in the cotorl panel in the hardware and sound section . in the sound section in the recording tab it is written that microphone is not plugged in while i have microphone in front of my screen . could any one help me.?????

Try to disable transparency in Windows, see:
*[[/questions/804050]]
Right click in a free space on your desktop. 
Left click on Personalization. 
There are four options at the bottom of the screen, choose "Window Color and Appearance". 
Select a border color 
Uncheck: "Enable transparency" 
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

RPC Server not Available error when using Windows Fax & Scan under Windows 7

RPC Server not Available error when using Windows Fax & Scan under Windows 7

Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT1926 download does not start i am using windows 7 and checked the pop-up blocker

download does not start i am using windows 7 and checked the pop-up blocker

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Problems login with scanners to sapwebconsole (using Windows 2000)

Hello,
We are currently testing SAP system with SAPwebconsole in warehouse in China. We have Psion scanners (7525, 7535). Furthermore, we use Windows 2000 with SAPwebconsole, SAPGUI (Patch 21) and IIS engine. Service Pack SP1 has been installed on web server to optimize buffer in IIS and ISAPI application.
The browser on terminals is Naurtech. The wireless data signal in warehouse is good.
Our problems occur when user login SAP using scanners --> message in terminal screen is "Connection to R/3 broken". Many user are not able to login in SAP via SAPwebconsole. We can only restart web server but still many users are not able to login via terminals and several users can work for 5-10 minutes. Approx. 60 users are working in DC with scanners.
What could be problem? Our load test failed due to these conection issues.
Has anyone experience with these issues (in warehouses with similar number of scanners)? Could web server be part of the problem?
Thanks,
Richard

Hi Richard,
What can I say? I have the exact same problem and I am trying to fix it.. I use the Naurtech browser, with IIS on Windows 2000 server. The users are using it and suddenly they get this message Connection to R/3 broken. Just wanted to check with you if you were able to fix this issue. Any help is greatly appreciated.
Thanks
Balu

Connecting nano to pc using windows 2000... help???????

how can i connect my nano to the pc using windows 2000???????

Posted this in another thread, but since I just got my 3g Nano today, I think I have it figured out.
Download and install the latest Winamp free player. Download the install latest iPod Wimamp plugin from sourceforge. A pop-up will prompt you on which iPod you have--choose the right one. Fine-tune in preferences (i.e. which letter drive your iPod shows up in, etc.). Re-start your computer. Launch Winamp. Everything should work now.
Under the Media Library tab, click on "Devices", then "iPod". Open the folder with all your music from the playlist and you can add music from there. I just right-clicked the whole thing and sent it to the iPod. All the track/artist/album information loads up fine. That's how I do it, at least. I still use iTunes to encode AACs and open the finished folder from Winamp, but iTunes tends to get in the way now.

IPod nano 7th gen not recognised in iTunes using Windows 8.1

I have an older 3rd generation iPod nano and a new 7th gen nano and I would like to sync them to the same iTunes on my Dell laptop (Inspiron 7520) running Win8.1. I have also updated iTunes to the latest version.
When I connect the new 7th gen iPod nano to my laptop via USB (tried all 4 ports) I get the following error message from iTunes:
"An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again."
I've been through most of http://support.apple.com/kb/TS3218 and still get the error message although I haven't tried connecting the iPad nano 7th gen to an older Win7 laptop yet with a fresh iTunes install.
When connecting the iPod nano7 Win8.1 recognises E: as an iPod very briefly after I have run a scan via McAfee. After a few seconds the E: drive disappears and iTunes reports the error message as above. Sometimes, E: doesn't disappear in Win8.1 but I still get the iTunes error message and the iPod nano itself goes from Connected to Main menu.
Any ideas how I can get iTunes to recognise my 7th gen nano? I'm not sure if this is a Win8.1 problem or iTunes.

Hello Abbey,
I would recommend the steps in this article named iOS: Device not recognized in iTunes for Windows found here http://support.apple.com/kb/TS1538. While the title of the article describes a symptom a bit different from yours, I feel the troubleshooting is still relevant.
If that does not resolve the issue, then I would suggest this article to help troubleshoot the USB connection.
iOS: Troubleshooting USB connection
http://support.apple.com/kb/ts1286
And lastly, resetting it just may do the trick.
How to reset an iPod nano (7th generation)
Press and hold the Sleep/Wake button and the Home button until the screen goes dark. The Apple logo should appear after a few seconds, then the Home screen should appear.
From: How to reset iPod
http://support.apple.com/kb/ht1320
Take care,
Sterling

Ipod touch will not sync with itunes using windows 7 makes everything freeze

My itouch has not been able to sync with itunes using windows 7 for a couple of days. Everything just freezes and I have to reboot my laptop. I have reinstalled itunes and deleted the backup of the ipod but nothing is working.

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

IOS 8 Safari not working with sites using Windows Authentication (again)

A testbed of iPhones and iPads were updated to iOS 8 today. When trying to access intranet sites in our company that use Windows (IIS) Authentication, it challenges for the login and password 2 or 3 times, then nothing - just hangs. These sites work fine on iOS 7 devices - and worked on the same devices that were upgraded.
Windows Authentication was broken in iOS 7.0 also and not fixed until a later update. Why does this keep getting broken?

This was a thread that discussed this when it was broken in iOS 7.0...
https://discussions.apple.com/thread/5327078?start=0&tstart=0
I just tested with Chrome on the iPhone upgraded to iOS 8 and it works fine. It is Safari that is broken again.
Of course, Apple won't give us a way to make Chrome the default browser when links are clicked in emails, so it's not exactly a solution.

Internal speakers not working DV4-1225DX USING WINDOWS 7 64 BIT

DV4-1225DX USING WINDOWS 7 64 BIT. Internal speakers stopped working and orange mute light is on. Externaal speakers will work,

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45073.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery, plug in the AC Adapter and start the notebook.
When Windows has fully loaded. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Ipod nano not being seen by computer, windows, 2000...

after over a week on the phone and attemting to get my computer to "see" my nano, and not being able to do so. and after going thru every trouble shooting guide given to me by apple i did get my nano to work.
I used every usb port but two, the two off the mother board, when i used one of them the nano took off and worked liked it was susposed to do, so...... you people who have this problem or know others pass the word use the mother board usb ports. nothing else.......

i resolved my computer, windows 2000, not seeing by i pod nano, by using the usb ports from the mother board. use no other usb ports, not usb hubs, or other circurt ports, just mother ports..................

Error 1053 the oracle(8.1.6) service is not starting on a fresh windows 2000 install

Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion.

Can anyone help!!!!!!!!
Oracle service does't start on windows 2000 gives error:
Could not start the oracle service on Local computer
Error 1053: The service did not respond to start or control
request in a timely fashion. This is what I did to start the oracle service..
1. Change the startup type to manual in the windows service panel
2. Restart the Windows 2000 PC
3. Start the Oracle service by clicking the start button in the services window.
4. It will hit the same error ie 1053..
5. Now kill the oracle process using windows Task Manager
6 Once again go back to services window and click the start button
7. It will show the status meter window with a close button..
8. After the status meter crosses halfway hit the close button..
9. Your oracle process is started now..

Re: single log-on (SSO) using Windows 2000 and Active Directory

Hi Honggo,
Its possible to see all the Active Directory users in WLS6.1 by
configuring the ldap realm.
You can use any of the username/password in ldap but you still have to
login again.
However the concept of single sign on across operating system and WLS
might not work in WLS6.1. WLS 7.0 allows you to write code that
supports these kind of things better.
honggo wrote:
anybody know how to use windows 2k authentication
(implemented by Active Directory)
to support SSO in WebLogic Server?
What I mean is I want to login once and only once
in win2000 and somehow weblogic server know
who is currently logon and impose some Access Control
many regards in advance
honggo

Replying again because it didn´t seem to work last time.
Could you be more specific? What code do I have to write to achive single sing on across Windows and WLS 8.1?
Regards
Mauricio Hurtado
Banco de Mexicio

How to locate IP address using Windows 2000!

My environment is:
* Windows 2000
* Standard Oracle 9i Version 9.0.1
* AOL DSL high-speed internet service
To invoke iSQL*Plus (on my machine) via a browser on another machine, I need to give the other user either an IP address or an HTTP address. I have been using DNS2GO (a DNS client) to map my HTTP address into an IP address. I would like to eliminate this process and just give the other user my IP address as DNS2GO has not been reliable for me.
Usings Windows itself, is there a way that I can find out my AOL IP address? I would like to eliminate the use of a third-party software. When I ping my host name, the IP address I see is not the one I want. It will not allow me to connect to the HTTP server on my PC. It is also not the IP address assigned to me by AOL which is done dynamically. How can I use Windows to identify my AOL IP address? Since DNS2GO was able to identify the IP address, I feel I should be able to accomplish the same using Windows.
Any help would be appreciated1!

*** I have found the answer to my question so please disregard it! ***

How can i intergarate eclipse with tomcat using windows 2000?

i'm using Eclipse 3.0 with sdk 1.4, i downloaded Tomcat and configured it for plugin to Eclipse. But yet i can't start the Tomcat server.
if any one can help me please of how to configure tomcat or the proper installation in windows 2000.

Well whebn i start the server this is the what happens:
H:\>%CATALINA_HOME%\bin\startup
Using CATALINA_BASE: H:\Eclipse\eclipse\tomcat\jakarta-tomcat-4.1.31\
Using CATALINA_HOME: H:\Eclipse\eclipse\tomcat\jakarta-tomcat-4.1.31\
Using CATALINA_TMPDIR: H:\Eclipse\eclipse\tomcat\jakarta-tomcat-4.1.31\\temp
Using JAVA_HOME: C:\j2sdk1.4.2_10
H:\>
=================================
i don't see any error during the start up,but i soon as i shut it down this is what happens:
H:\>%CATALINA_HOME%\bin\shutdown
Using CATALINA_BASE: H:\Eclipse\eclipse\tomcat\jakarta-tomcat-4.1.31\
Using CATALINA_HOME: H:\Eclipse\eclipse\tomcat\jakarta-tomcat-4.1.31\
Using CATALINA_TMPDIR: H:\Eclipse\eclipse\tomcat\jakarta-tomcat-4.1.31\\temp
Using JAVA_HOME: C:\j2sdk1.4.2_10
Exception during startup processing
java.lang.ClassNotFoundException: org.apache.catalina.startup.Catalina
at org.apache.catalina.loader.StandardClassLoader.loadClass(StandardClas
sLoader.java:945)
at org.apache.catalina.loader.StandardClassLoader.loadClass(StandardClas
sLoader.java:810)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:129)
H:\>

OEM is not multi-screen friendly using Windows 2000 / Matrox

Similar Messages

Maybe you are looking for