OEM12c :: Agent has stopped monitoring. The following errors are reported : DISK_FULL
Hello sir,
I am new to EM12c Cloud Control.
Problem is that EM shows "Agent Unreachable" as status for an agent.
and also shows following error ::Agent has stopped monitoring. The following errors are reported : DISK_FULL.
Agent status is as follows:
E:\Agent_Grid\agent_inst\bin>emctl status agent
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
Agent Version : 12.1.0.3.0
OMS Version : 12.1.0.3.0
Protocol Version : 12.1.0.1.0
Agent Home : E:/Agent_Grid/agent_inst
Agent Binaries : e:/Agent_Grid\core\12.1.0.3.0
Agent Process ID : 7164
Parent Process ID : 5816
Agent URL :
Repository URL :
Started at : 2013-11-20 11:58:25
Started by user :
Last Reload : (none)
Last successful upload : 2013-11-20 12:02:58
Last attempted upload : 2013-11-20 12:02:58
Total Megabytes of XML files uploaded so far : 0.06
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0
Available disk space on upload filesystem : 1.15%
Collection Status : [COLLECTIONS_HALTED(
UPLOAD SYSTEM Threshold (UploadMaxDiskUsedPct: 98) exceeded with 98.84559)]
Heartbeat Status : Ok
Last attempted heartbeat to OMS : 2013-11-20 12:19:04
Last successful heartbeat to OMS : 2013-11-20 12:19:04
Next scheduled heartbeat to OMS : 2013-11-20 12:20:04
Agent is Running and Ready
I also found some help at
Agent has stopped monitoring. The following errors are reported : COLL_DISABLED|DISK_FULL | Sunkupuli DBA
but didn't help me.
Please, help How can Agent start Monitoring again?
Many Thanks in advance
Free disk space or Add disk space - such that the Disk usage is less than 95%
The Agent Collections will be re-enabled (when Disk usage falls below 95%)
Wait for a few minutes; the Agent and Host Targets should now be shown Up in Console.
Symptoms are almost similar to MOS note 1501904.1
Similar Messages
-
The following errors are reported : COLL_DISABLED.
what does this mean and how can this be fixed?
]Severity=Unreachable Start
Message=Agent has stopped monitoring. The following errors are reported : COLL_DISABLED.
Oracle_home : 10.2.0.3
Version: 10.2.0.4Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.4.0
OMS Version : 10.2.0.4.0
Protocol Version : 10.2.0.4.0
Agent Home : /xxx/oracle/product/agent_home/agent10g
Agent binaries : /xxx/oracle/product/agent_home/agent10g
Agent Process ID : 9311
Parent Process ID : 12826
Agent URL : https://localserver.corporate.ge.com:3872/emd/main/
Repository URL : https://mangemetn_server.corporate.ge.com:1259/em/upload
Started at : 2008-04-28 00:32:59
Started by user : oracle
Last Reload : 2008-04-28 00:32:59
Last successful upload : 2008-04-28 02:38:15
Total Megabytes of XML files uploaded so far : 9.39
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 23.65%
Last successful heartbeat to OMS : 2008-04-28 02:39:32
Message was edited by:
Snoopy&Rooney -
Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.
Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.
-
Unexpected end of file has occurred. The following elements are not closed
My installation of UPK has decided to stop working with the following error;
Unexpected end of file has occurred. The following elements are not closed: Storage. Line 3, position 1.
We've uninstalled and reinstalled the application and have the same error.
Any insight into this error is apprectiated.
AVerify from Compatibility between Office 365 MP and Management Server because this issue related to error in MP that you imported. And i think you use below link which is compatible with Management server 2007 R2 cu4 not SCOM 2012 R2
http://www.systemcentercentral.com/scom-monitoring-office-365/
Also you can refer to below link
http://thoughtsonopsmgr.blogspot.com/2011/09/scom-and-office-365.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer". -
Is anyone has already had the following error using PDF Generator?
Hello,
I try to convert some documents (.doc, .ppt, ...) into .pdf using the PDF Generator.
And sometimes, I hava the following error in a .log file (in the out directory):
Failed to process job DDLaunchObject-2006-08-08 13-22-40.102.doc
Error Code: 1,011
Reason: The BMC reported failure in converting the document.
Is anyone has already had that error? What do I have to do?
Please, could you help me?
Thanks a lot!I have seen this error when trying to convert a certain Word document. The Word document itself when i opened it in Word resulted in a warning message that it needed to install a language pack, once i installed this language pack, the conversion in PDFG worked.
PDFG uses the native process in the background to convert the files. That means for Word docs it actually uses msword.exe to read the document. If opening the document in Word results in any kind of error or user dialog, then this could be what causes the PDFG server to fail, as the server cannot respond to the error/dialog that occurs.
hope that helps.
David. -
I'm getting an error message when trying to make in-app purchases.
Error purchasing from App Store
Cannot connect to itunes Store (0)
I can purchase songs in itunes, but not the in-app purchase for Kingdoms at War. I've checked the parental controls and all the other obvious things in settings. Let me know if anyone knows how to correct this. Thanks.Here is an update and more information: I actually have two MBP's. One is a mid-2009 model and one is a new, mid-2012. I transferred files from the mid-2009 to the mid-2012, but I use both computers frequently. This problem only occurs on the mid-2009 and not on the mid-2012. I have authorized both computers.
-
Has anyone received the following error after updating to the Yosemite 10.10.1/2 OS?
*** Collection <_NSArrayM: 0x618001059620> was mutated while being enumerated.
This issues arises when opening, editing, and placing contents in PS.
Issue only visible within PS.Yes, it's a common issue in MacOS 10.10 affecting the open and save dialogs.
Apple is aware of the OS bug and working on a solution. -
Has anyone seen the following error when using Safari on IPad?
http://www1.pcprotection72.co.cc
Warning! Your computer is at risk of malware attacks.
We recommend you check your system immediately. Press OK to start the process now...
Safari is frozen, but I clearly do not want to click OK. Is there a way to Force quit Safari? Everything else on IPad seems to be working fine. Thanks.I have not seen that particular message but in no way is it good. To force quit an application; hold down the Power Button at the top until the "slide to power off" appears and then immediately switch from the Power Button to the Home Button until the application quits.
-
Hey All, Has anyone seen the following error message
"Service 'Apple Mobile Device' failed to start, verify that you have sufficient privileges to start system services."
Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
When clicking on the start button for an addon it is genarating the following error: CLR20r3
Hi Experts,
When clicking on the start button for an addon it is genarating the following errors are:
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: sample-test.exe
Problem Signature 02: 1.0.0.0
Problem Signature 03: 535788b7
Problem Signature 04: Microsoft.VisualBasic
Problem Signature 05: 10.0.0.0
Problem Signature 06: 4ba2183b
Problem Signature 07: 88
Problem Signature 08: 1b
Problem Signature 09: MDAMBELLEQHB0T4VDASYJQF4K5MX15WO
OS Version: 6.0.6001.2.1.0.272.7
Locale ID: 2057
Please help us with the resolution
Thanks,
Satish.Hi
check this thread.
Check this thread
If you are running in 64 bits machine: check this thread.
Kind regards.
Agustín Marcos Cividanes -
Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium -
When I turn on my computer I get the following error messages:
Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
How do I fix these?Library/LaunchAgents: com.promethean.activmgr.plist
Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
These are the system extension errors
"/System/Library/Extensions/AppleGraphicsControl.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
"/System/Library/Extensions/BJUSBLoad.kext"
"/System/Library/Extensions/EPSONUSBPrintClass.kext"
I do not know what any of these do or how to fix them. I have run multiple disk permission repairs & disk repairs. The startup & system extension errors continue to come up.
I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message. -
I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped working?
Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene -
Session "Microsoft Security Essentials OOBE" stopped due to the following error: 0xC000000D using win 7 64bit over and over BSOD
My event viewer has been coughing the error line above. It has lead to the feeling of a Carotid Artery leak of memory where my whole
system slowly stops working till BSOD. Windows Explorer just stops working then Death.
I HAVE HAD THIS HAPPEN MORE AND MORE, AND IT APPEARS TO BE A PROGRAM PROBLEM, ANYBODY ELSE HAVE THIS.
IT HAS COST ME 2 DAYS WORK NOW.
MIKEHi,
When does the issue begin to occur?
Since Windows system uses separated user mode and kernel mode memory space, stop errors are usually caused by kernel portion components, such as a hardware device,
third-party drivers, backup software or anti-virus services (buggy services).
Please refer to the following steps to troubleshoot the issue.
1. Boot the computer in
Clean Boot for a test.
2. Temporarily disable all unnecessary hardware devices in Device Manager, such as Modem, sound card or external device.
For detail steps, we can refer to the link below:
Device Clean Boot
3. Upgrade the virus definition, run antivirus program and perform a full scanning.
If the issue persists, please upload the minidump file (%systemroot%\minidump) to SkyDrive (
www.skydrive.live.com ), then share the link to me. I will be glad to assist you to analysis the data.
Thanks,
Novak -
Microsoft Security Client OOBE stopped due to the following error: 0xC000000D
I keep getting this error in my event Viewer and I removed Microsoft Security Client a few weeks ago and replaced it with Bitdefender 2012
Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
I am also getting these aswell...
Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0811960D92F5. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the
network address (DHCP) server.
A problem prevented Customer Experience Improvement Program data from being sent to Microsoft, (Error 80004005).If you do not want to reinstall Microsoft Security Essentials to stop this problem, there is a step which you MUST, I repeat, MUST follow. As indicated above by Zuhl3156, YOU MUST, again, MUST shutdown the security counter. This is a problem
when you uninstall MSE, it does not remove the security counter. This is the reason that everyone says to delete the C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl file. This file is used and created by this counter.
If you have uninstalled the MES, then you MUST delete the C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl. But, MOST IMPORTANTLY, you MUST go into into Computer Management and drill down into:
System Tools -> Performance -> Data Collector Sets -> Startup Event Tracing Sessions
Then, in the frame to the right on that window, select Microsoft Security Client OOBE, right click on it and select Properties. Then DISABLE it (uncheck the Enabled box). Then, when you select OK, if you have uninstalled MSE and NOT reinstalled
it, the entry in the right frame will 'magically' disappear.
This is a problem with the uninstall of MSE and needs to be resolved by Microsoft (hopefully they are reading this). It has taken me DAYS to discover this, and many different attempts to resolve this. But, apparently, this has now resolved my
problem. I have seen performance counters cause many problems in my experience with Windows, and am very confident that this resolves the issue.
I cannot thank Zuhl3156 enough for his suggestion and my willingness to try it (I noticed 'performance counter' and jumped on it). It seems to work wonderfully for the moment.
I hope this helps someone else who has spent days trying to chase this nightmare down.
Jim
Maybe you are looking for
-
ITunes on Windows 7 ceased expanding miniplayer after Ctrl click on thumbnail artwork.
During playback, iTunes used to expand the miniplayer album art, to full screen size, when holding the Ctrl key and clicking on the thumbnail at the top of the screen. Now the same Ctrl + click has no effect. However, after doing it, I get a double i
-
Is Pro Tools 9.0.5 compatible it Mac OS X 10.7.4 Lion?
Need answers asap
-
Daily, successive kernel panics - how to identify root issue?
A few weeks ago, my computer suffered from some water damage. I sent it to an Apple repair center where most of it was replaced, including the logic board, speakers, discrete GPU, and I/O board. After using it for 2 days without issues, I installed
-
LCM can not map Crystal Report connection properly
Hi, We are using LCM to transport Crystal Report files from Devlopment server to Quality. The transports are successful, we can also see that connections (to source) also has been changed properly. These Crystal Reports have 3 parameters. Our require
-
Can I have two iPads on the same iTunes account?