[Off Topic] New to the forum

Hi All,
I'm new to the forum & Adobe Designer.
My question is that I want to recieve all forum messages to my email rather visiting forum page every time, can you pls help me how to set it up.
Infact, I setup to recieve full email message in preferences but no luck recieving the mails.
thanks in advance
Ramesh

I think that's how the digest email option works. You will get all the new messages in the forums that you subscribe send to you at the time you set.
If you choose to notify you choose not to, you will receive email notification as new message being posted. In the email will have a link that link back to the newly posted message from the forum.

Similar Messages

Off topic: Webhosting in the UK...which one?

HI,
Sorry for the off topic question.
Does anyone know a reliable, cheap webhosting? Iv got a website, and i'd like to put it on the net. I don't need any special features.
I'm looking for the cheapest / most reliable on the net.
Also, are there server specially designed for mac made website?
Cheers,
Dave

Here is an alternative
How to manually update 2011 Xperias to android 4.0.4
http://talk.sonymobile.com/thread/38251
Don't forget to mark the Correct Answers & Helpful Answers
unrelated topic, if you have some time please check this thread
http://talk.sonymobile.com/thread/44888
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

New To The Forum And Looking For Speed Help!

Hello, After trying to find information about my problem on the Internet and then speaking to the BT Indian Call Centre, I stumbled upon this forum. I am hoping, having looked at so many helpful comments and contributions, that I might be able to shed some light upon my connection speed issue. I have had a very pleasing and stable Internect connection speed of nearly 8Mb. However, I recently moved my router to the Master socket in the house which was better positioned to give a good WiFi signal throughout my house. However, when I have plugged in the router and booted it up, I can only connect at just over 4Mb regardless of what I try. I know I am at risk of sounding a touch ungrateful here because there are many more people with bigger problems than I but I would be very grateful for some advice / assisitance as to why my problem might have occurred and how I might regain my previous speed. Thank you in advance for any help! Cheers.
Solved!
Go to Solution.

welcome to the forum
in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
are you connected directly to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I would like to thank JJMack for his response to my discssion of 9 6 14, 8:43 pm regarding difficulty with downloading photos to PS CS2 in Windows 7 I don't know how to reply as I am new to the Forum.

regarding difficulty downloading photos from camera to PS CS2 in Windows 7. I don't know how to reply as I am new to this forum.
Thank you,
Elena de la Vega

Hi, new in the forum

I was wondering is someone can help me to do a master reset on my BB8220?
Thanks!
Solved!
Go to Solution.

Hi Chinita305,
Welcome to the forums.
For a clean wipe go to options>Security options>General settings. in here, click the menu button and select Wipe Handheld..
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Off-Topic: Open Source Wiki/Forum/Knowledge Sharing?

Did not really have another forum to post this to, so I thought I would so here. We are looking to set up a mini-portal accessible on our intranet. The idea would be to share best practices, standards, designs, results of continuous integration (testing coverage, maven build results, etc.) and a number of other documents.
My first thought was to put in a Wiki (easy to edit and publish content, keeps track of revisions, allows attachments, etc.) Then after thinking about it, some of the features of a forum were also nice (threaded messages, ability to watch topics, etc.)
Does anyone know of a good hybrid that would allow both sets of features? Ideally, something in Java that we could simply drop a WAR onto one of our lower environment app servers. Integration with LDAP would be a huge plus (would not have to administer security separately).
Much obliged.
- Saish

Saish wrote:
Perfect. More than what I was looking for. Thanks Navy. I would give Dukes if I could, but those days are no more. So, please simply accept my gratitude.
Accepted :)
I think that part of the reason that the distro is so huge is because it includes three or for app servers with it (jboss, tomcat, glassfish and maybe one or two others).
Anyways - glad I could help.

New at the forum

Hello,
I'am new here and I looking for a comparison between IDM from SAP and from IBM (Tivoli) or from other firms . What's the advantage and disadvantage?
Thank you for all the help in advance.
Regards
Uwe
Edited by: Uwe Pack on Mar 11, 2008 8:40 AM

Hello Uwe,
Eric is right. However the task of comparying two IDM solutions is not an easy one. Given the various features is is rather complex to really tell which one is better. We have been doing product comparisons for the last 5 years including Novell, IBM, SUN, Siemens, Microsoft, Voelcker Information, HP and now of course SAP.
The biggest differentiation beween every other product and SAP is definitely the integraiton in the ABAP stack. This is where Eric is right. You will not find any other product that does this so well (of course). All other IDM vendors offers agents/connectors/adapters/drivers for SAP CUA and SAP HR but that is only a communication to the SAP system and not the type of integration that SAP offers.
Again - this is onyl one aspect of a comparison. In general we use some 25 main topics for a "management compatible" comparison and some 50 different aspects for a technical comparison.
Things are even getting more complex as IDM solutions are more and more extended by role management solutions. So it is also very important for a comparison to take strategic issues for a specific customer into account (i.e. will the customer create a company wide role model to be used in user provisioning).
I know that this will probably not really help you - but that is the way it is.
best regards
Erich Vogel

New to the forums, not new to Mac. Need help on failing hard drive.

Hello, glad to have found this forum...I need all the help I can get. Let me explain what I have, what it's doing, what I want it to do, what I "think" I need to do.
*What I have:*
733 G4 with superdrive, 512 MB SDRAM, 40 & 60 gig internal original hard drives
*What it is doing:*
For about a year one of the drives (seems to be my 60g start-up drive) has made clicking/popping noises not unlike when you click/cluck your tongue. I've ignored it, foolishly, and gone about my business. Then I began having to click the mouse and punch keys when I start-up in order to get the drive to begin spinning, otherwise it would never kick in and I'd get the "?" face. Anyway, I have been living like that for many months until recently when my start-up drive only had about 500MB left of space, I burned some DVD's and freed up about 6 gig on the drive for some cushion the other day. Well, since doing that, when I start up now I get a spinning globe. I have to hold the option key down at boot and then select the drive manually and I'm back to being fine again.
*What I want it to do:*
I'm freaked out about losing data because I am a photographer and graphic designer, so I would die if I lost any files. I have been using one of my old iPods as a back up drive to dump data on and burning some DVD's too...but still, I have most of my life still on the drive. Here is what I am considering. I would like to get an external drive to move and continue to grow my massive files for my work and creativity. I'm thinking the G-Tech 320 Quad external would be a good fit. Now, moving back inside, my 60g start-up is telling me it's failing and to back up and replace before...well, you know. My 2nd internal drive is 40g and is strictly my iTunes library of MP3s.
How do I save myself and replace my start-up drive?
Do I buy the G-Tech first, move all my files over, then replace the internal, failing 60g? Can I start-up from the G-Tech? Should I/Can I make my 40g the temporary start-up, replace the failing 60g, and go from there? How should I do this and must I get the G-Tech now?
While on this same question, I am getting conflicting information regarding how much my 733 G4 will recognize as far as each drive size. What is the max size each drive can be? What is the max combined?
*What I think I should do:*
I think I should buy the G-Tech, move my life over there, then use the working 40g as my start-up, replace the failing 60g with the largest possible when possible, make the replacement internal the start-up again, use or replace the working/existing 40g as storage/back-up, live happily ever after.
*And on a side note:*
I plan to drop two sticks of 512MB memory, this filling it up to it's max 1.5 gig of memory. Will this have a noticeable affect on my computer? If so, how?
Oh, and the reason I was opting for the Quad G-Tech is because can't I upgrade and add FW800 ports to my G4 rather easily?
Thank you for any time or effort you give me in helping me through this urgent matter. I had run out of places to go and people to ask before running across this forum.

First of all I cannot believe you have no backup strategy and only start to worry about it after problems arise. You're an accident waiting to happen. Before you consider anything make backups.
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.
You can begin addressing the problems with your hard drive(s) after you get your stuff properly backed up. Once that's done get two larger drives for the computer and replace the small ones you now have. Your model should support hard drives up to 128 GBs in size. There is not specific limit on external drives so your external backup drive can be large enough to be partitioned into multiple volumes large enough to backup at least one of the internal drives (using the second internal drive as a backup for the first internal drive. This provides redundancy - an internal and an external backup.) You can then use the additional space on the external drive for your data files.
BTW, you risk catastrophic data loss by allowing the free space on your startup volume to drop below 3 GBs.

New to the forums, Need a liitle HELP!

I have a IPHONE 3G S 32gig. After reading all the Battery issues. Can you tell
me if I have a problem or not. I use phone to Check mail, Play a few games,
Check weather ect... Talk on phone about an 45-60 min a day. I let my phone go
to zero percent before I charge. I get about 2 days standby and about 5 hours
usage before I need to charge at 2%. Email in manual, 3g on, Wifi and Location off. 3.1.2 loaded. Is this good or bad
Thanks

This is what annoys me about the complaints about battery life. The vast majority, myself included, have no problems with battery life. But then again, I know I can't play Madden 10 (I'm addicted, I admit) for 20 straight hours without recharging. The iPhone is a little computer, not a boring Motorola cell phone. If you do lots of things, which you can do on the iPhone, you're going to test the battery. I can fly across the country, play games, watch video, and listen to music, and arrive in the other coast with lots of battery life left (say 20-30%).
BTW, I didn't know about this issue about complete draining. I swear that I read in one of the Battery Whining threads that the recommendation is to drain the battery completely before recharging. I never do that, because that'll be the day I need my phone fully charged.

A quick question from someone new to the forum, PLEASE help.

Hey Guys/Girls I have had my iphone 3g for over 2 years now I am not under any warranty or anything like that and recently my Iphone 3g power/hold button stopped working. I was wondering if there is anyway to fix it that you guys know about and also how much it would cost me to get it fixed?
Thanks alot in advance for you help.

I understand that without the contract that i would of had to pay that much, and yes now this much time later with so many newer versions of the phone released it does sound insane that i would have to pay 200$ to replace this one, seeing as i would have to hand this one in for it and they can turn around and fix it for next to nothing and sell it refurbished.
I dont understand how you think 200$ for a 3 year old phone sounds like a reasonable price, unless your loaded or something. I'm not trying to be rude but in my opinion that is way to much money.
I thought that maybe I could get it fixed from apple for around 25-75$

NEW TO THE FORUM NEED HELP INSTALLING CS2

I just bought an older version of CS2 for Mac from the original owner and when I tried to install it the software is no longer supported by my Mac. Can I install CS2 on a new Mac? And if so how, I have all the cds and the registration number. The original owner no longer has a Mac and can not use it.
Thanks in advance for your help.
OscarCKD

You can only run CS2 on Macs running OSX 10.6 or earlier. It won't work on newer Macs using Lion or Mountain Lion (OS 10.7 and 10.8).

A Bit Off Topic, But Can the HP Photosmart C3140 Be Shared Over a Network?

I was going to get a MacBook and since I need a new printer, this one looks good since it would be free (after the $100 rebate).
However, I've had trouble sharing HP printers over a network in the past. Would this one give me any problems. Also, if it's connected to a Windows computer, would it make a difference?

Hey Large,
Some printers don't support network printing because of driver issues and what not, but the C3140 should work just fine.
As for your windows question. I have found it easier to print from a mac, over a network to a PC, than the other way around.
Also don't be afraid to call apple tech support when you get your macbook. They will walk you through the networking process and answer any questions you might have. It's free for 90 days so use it.
Good luck

Hi - new to the forum. I am unable to get the true colour printing I am used to from my Canon Pixma 9500 mk2 since moving to a mac and using Aperture. The colours are simply not representative of the on-screen image. Any ideas?

Whatever I do with installing or de-installing printer drivers, selecting or deselecting colour synch or colour management options, the colour is simply awful compared to what I have been used to fir years, using the same printer with a pc and a 10 yeart old version of paintshop Pro. What is going on!??

First guess is that you are subjecting the data to two passes of printing conversions. If you use Aperture's color management for printing, you _must_ disable the color controls in your printer dialog.
How this is done varies for each printer. (The Aperture User Manual says, in full:
To turn off color management for your printer
Refer to the owner’s manual that came with your printer.
Additionally, make sure you have the most recent printer driver for your printer and OS. Printer makers have gotten good at making these files easy to get. Most now come with installation instructions.
Lastly, the only way to ensure that you get a good screen-to-print match is to use a hardware device to calibrate your monitor. That doesn't seem to be your problem, though.

New to the forum with a Canon ipf8400

I just wanted to introduce myself and my company to this forum. My name is Luca, I am a graphic designer and I work for JG Autographs (an autograph and memorabilia company). What prompted me to join this forum is we recently purchased a canon ipf8400 large format printer for fine art prints. Although I only saw a few posts about this specific printer on here but I figured If there were at least a few others using this printer, maybe somewhere down the line we could help each other out.

MsDJO wrote:
I am at the tail end of a Dreamweaver course. I've held my own fairly well but still am definitely a novice.
I created a form, want to center it (horizontally) on the page and align the field labels and values. How do I control the placement of the label and the value field so they are aligned like:
This article may be useful:
http://www.sitepoint.com/article/fancy-form-design-css/
Second question:
I created a template and set up the NavBar with simple links (did not use Spry menu). Formatted these links to be white because they were against a dark background. Problem is that any links I create in the main content area also turn white therefore are invisible against the white space of this area of the site. Is this a case where I should be using advanced CSS for descendant selectors (I just starting reading about this)?
Yes this is where you would use pseudo class selectors
http://www.thepattysite.com/pseudoclass.cfm
http://css.maxdesign.com.au/selectutorial/selectors_descendant.htm
http://www.westciv.com/style_master/academy/css_tutorial/selectors/p_class_selectors.html

New to the forums introdution / need a little help

hi i've just recently build a new PC for Gaming
CPU - Dual core E2200
RAM - 4GB
VGA - 8500GTMSI 512MB
i wonder if games like need for speed undercover and GTA IV will work fine ?

Yep probably, but at standard in game graphic resolution and details.

[Off Topic] New to the forum

Similar Messages

Maybe you are looking for