Office '08 DMG not showing on MBA Remote Disc

Hey all!
I installed Remote Disc onto my 2.8 iMac, and when I put in my DVD with Office '08, it doesn't show in the Remote Disc pane on my MBA.
Suggestions?
It installed just fine on my iMac, but doesn't show on the MBA when it's in the drive... Happened to anyone else?

Did you check CD or DVD sharing in System Preferences/Sharing ?

Similar Messages

  • Host Computer won't show on MBA Remote Disc

    I need to install iWork on to my MBA and I'm trying to use the DVD sharing option...
    On my host computer (an imac) I have opened the system preferences>sharing and clicked the DVD or CD sharing box, as well as the Ask me before allowing other to use my DVD drive box.
    I then switch over to the Air, go to finder, click on Remote Disc under Devices and...nothing shows up...
    They're both connected to the same wireless network...
    Help! And Thank You!

    Hi-
    The error report "the underlying task reported failure on exit" is a hard drive error that Disk Utility couldn't repair. However, if the Disk Utility was from the Leopard install disc, then the version is wrong. If the error came from the Tiger disc, you may need DiskWarrior to correct the error.
    First, though, try repairing the hard drive with fsck.
    Boot to Single user mode by holding Command+S while booting. In the resulting screen, at the command line, type /sbin/fsck -fy and press Return.
    fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
    The volume (nameofvolume) appears to be OK
    If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
    FILE SYSTEM WAS MODIFIED
    Important: If this message appears, repeat the fsck command you typed until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do). Two, three or four tries may be necessary.
    When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
    Your computer should start up normally and allow you to log in.
    If the fsck returns that the drive is OK in the first pass, and typing "reboot" doesn't get a proper startup, try resetting the PRAM on the G4. Hold CommandOption+PR while booting, hold until the second startup chime, and release. The machine, hopefully will boot.
    Let us know how you fare with this.....

  • Thunderbird does not show a blocked remote content notification bar when content is blocked even when Allow remote content is not clicked

    Thunderbird does not show a blocked remote content notification bar when content is blocked to allow remote content. The allow remote content box is not enabled in the privacy settings.

    Is it always like that? or just from one source?
    How are you viewing emails ?
    (view / Message Body As) should be ''original html ''

  • Shared Office 365 calendars not showing up in iCal

    We are using Microsoft's Office 365 and have users with a variety of devices and applications (Mac/iCal/Mail, Windows/Outlook, iPhone, Android, etc.).
    I am the administrator of the Exchange accounts. I have created four calendars that are viewable by everyone within our organization (just general "company-wide calendars").
    Users with Outlook are able to view those shared calendars just fine. However, I'm not able to add the shared calendars with users using iCal.
    If I add them as a delegate, they can see all my calendars, but if I just share the calendar, they get a "no access" error.
    Here's where I'm setting the shared calendar permissions. I've tried setting them as Reviewer, setting the Default as Reviewer, and setting them as Owner.
    Because it works fine in Outlook, I'm wondering if it's an iCal problem. For cross-referencing purposes, here's my issue at Office 365's community: Shared calendars not showing up in Apple iCal

    Hi All, after much trial and tribulation, this works for me on BusyCal. It is an app you can get on the apple store.
    Calendar should be created then shared with the busycal user. The link does not work, but add exchange account as you would on  Mac Calendar under preference>accounts. The go to the sharing tab and  click plus and type in email of person who shared calendar. It will auto populate. For some reason it does not work under delegation in Mac Calendar
    The  key and where I spent 4 days on the phone with apple and office 365, is  that the owner of the calendar has to share their calendar, named  :"calendar" They can just click the permission "show availability only."  Once they do that, any other calendars they have created and added you  as full permissions or details, you can see. I see nothing on their  calendar called "calendar"  Not the perfect solution, but it works. BusyCal is $30
    If this does not make sense feel free  to message me or I will respond here.

  • Office 365 calendars not showing

    I'm running Version 8.0 (2032.6.1) of iCal on Yosemite. My main calendar is hosted on Office 365.
    There was a problem with duplicated entries in the calendar, which actually meant that iCal would crash on startup. I fixed that by deleting the duplicates with temporary access to the Windows version of Outlook. As part of trying to get iCal to work again, after the repair of the calendar, I removed the various caches and .plist files, as recommended on various sites. Now, I'm in a slightly strange state in that the Exchange (Office 365) account isn't listed in the iCal list of accounts, and entries for that calendar are not showing, it is still in some way connected, because the application icon shows the number of outstanding entries.
    What is the best way of restoring visibility of the Office 365 calendar in iCal?
    I've tried deleting and re-adding this account, but it hasn't helped.

    Hi All, after much trial and tribulation, this works for me on BusyCal. It is an app you can get on the apple store.
    Calendar should be created then shared with the busycal user. The link does not work, but add exchange account as you would on  Mac Calendar under preference>accounts. The go to the sharing tab and  click plus and type in email of person who shared calendar. It will auto populate. For some reason it does not work under delegation in Mac Calendar
    The  key and where I spent 4 days on the phone with apple and office 365, is  that the owner of the calendar has to share their calendar, named  :"calendar" They can just click the permission "show availability only."  Once they do that, any other calendars they have created and added you  as full permissions or details, you can see. I see nothing on their  calendar called "calendar"  Not the perfect solution, but it works. BusyCal is $30
    If this does not make sense feel free  to message me or I will respond here.

  • Design Notes not showing up in Remote Server column

    I cant seem to see the Design Note icon appear in the appropriate column of the remote server for collaborative use.
    I think I have set the feature up correctly, and I have uploaded the document in question to the server, but no sign of the notes icon in the remote view pane.
    What a pane

    I sorted this by turning off and on the Option to Show the Notes column in the FileView Columns window in the Advanced Settings.
    Then refreshed the remote Site view and the Note icon appeared.
    I think I already had the Enable Column Sharing option ticked there but maybe that also did it . . .
    Thanks

  • Vista not showing up in startup disc pref?

    I have Vista 64bit Business installed, via a bootcamp partition on a second internal drive on my 8 Core Mac Pro, which is running 10.6.2. Occasionlly I will use VMware fusion running off my bootcamp partition, but yesterday when I tried this, vmware said that it couldn't find the specified files. I could see the hard drive on my destop but when I went into the prefs > startup disk I did not see Windows OS? Normally it is there. If I restart my computer and hold down the option key I can then select the Windows partition. I am assuming that my issues with vmware are related to the windows partition not showing up in my startup disk prefs. Does anyone have any ideas on how to fix this?
    Thanks,
    Steve

    Obviously you are not using a PowerPC G5.... and you didn't add an NTFS driver like that in Paragon or MacFUSE etc to write to NTFS drives.
    Normally, for me, Windows is not shown... I make changes in Windows. And you didn't move the drive or partition at all.
    I'd boot from Windows DVD and do system repair, also next time in Vista (natively) have it do a full check disk.

  • BootCamp not showing up in startup discs!

    I have sucessfully partitioned my macbook pro (thanks Ds Store!) and now I have another problem, When booting up I hold down option to choose my startup disc all that shows up is macintosh HD and recovery, BOOTCAMP is not showing up, even though it showes up in devices please help me!!
    - Ethan

    Did you actually Install a version of Windows into that Boot Camp Partition? It doesn't sound like you did.
    You'll need a copy of Windows 7 or 8, 64bit, and a valid license key code for whatever version you plan on installing.
    Ethan_Fidler wrote:
    I have sucessfully partitioned my macbook pro (thanks Ds Store!) and now I have another problem, When booting up I hold down option to choose my startup disc all that shows up is macintosh HD and recovery, BOOTCAMP is not showing up, even though it showes up in devices please help me!!
    - Ethan

  • Apple TV not showing up in remote app

    Hi,
    My remote app was working just fine, however it has suddenly stopped working with Apple TV. Home Sharing is on, disabled it and re-enabled it with no success. Thought it might be my network, but Airport express is showing up fine in Airplay. please help people. thanks.
    Btw, apple tv is fully updated

    different user-
    same problem.  cannot get it fixed.
    2 apple TVs, same network, all updated and phone iOS updated as well.  1 of them refuses to show up.  it used to work, but for some reason spontaneously quit.
    i'd prefer not to have to reboot an apple TV every time I want to use it.  that's just silly.

  • Shared Folder Not Showing Up In Remote Finder

    I'm trying to share a folder on a removable hard drive. While other shared folders appear in finder on remote machines this one does not. It appears as shared on the local machine, both in finder and in system preferences and as far as I know the permissions are set correctly. My firewall settings should be fine since I can access other shared folders from the same machine, but I'm stumped about why this isn't working.
    Any help would be much appreciated
    ~ Anders

    Anders,
    To narrow down the problem, take the external drive and hook it up to different mac and then share it. Compare the results. If it works from the other mac it's a problem on your mac, if it doesn't then it's a problem on the removable drive.

  • Spry Tabbed Panel not showing correctly on Remote Server

    Hi Folks,
    Here is something that is bugging me since a few days and I can't find the error or the culprit; I have the same page on another domain on the remote server and that is showing correctly. I even checked with Win Merge and the files are completely identical. It has no errors and is showing correctly on the local server. It also shows correctly in Dreamweaver CS4 or when viewed as a web page in Firefox etc.
    Link: http://www.venture-wilderness.com/services.php
    Please have a look and let me know what is happening.
    Thank you,
    zabberwan

    Hi zabberwan,
    Please have a look and let me know what is happening.
    My IE 8 show's me this (in snippets):
    and this:
    and here (http://www.venture-wilderness.com/) I can see this:
    It seems to me, that all is ok!?
    Hans-G.

  • ICal events not showing up on remote computer

    Hi,
    I am using .Mac to sync iCal.
    I write an appointment in Computer A. Computer B will sync the appointment and allocate the time on computer B but doesn't show what the appointment was.
    Any idea?

    Beno,
    Here are three troubleshooting articles which may be helpful:
    http://docs.info.apple.com/article.html?artnum=301378
    http://docs.info.apple.com/article.html?artnum=306129
    http://docs.info.apple.com/article.html?artnum=306484
    ;~)

  • Why do lyrics not show up on remote computer using iTunes 12.0.1.26?

    My music is stored on my iMac. Since iTunes 12.0.1.26 was installed, when I go to the "shared library" on my Mac Air, select a track and click on "Get info", the lyrics no longer appear. They do appear on the iMac. And all the other data associated with "Get info" appear on the Mac Air. Any clues as to why this is now happening?

    https://www.apple.com/support/itunes/getstarted/

  • Firewire Firelight not showing up as bootable disc on Macbook Pro

    I have a Firelite FWFL40P firewire external harddrive that has system 10.4.8 installed on it. IF i hook it up to my iMac G5 , It shows up and boots as a bootable Disk (system preferences->Start-up Disk), but when I attach it to my MacBook pro Dual, it won't show up. I think it used to with older OS.
    THougths?
    roger

    It is because a MB only boots from a GUID Partititon Table and The G5 only boots from and Apple Partition Scheme. If you wish to use this on both machines for doc storage/transfer your best bet is the Apple Partition. If you need a bootable exteranal GUID is the only choice for the MBP. One disk cannot boot both machines. Two partitions will not work as the partition scheme is the culprit here.
    Disk Utility>50 GB??(disk not volme)>Partition>Options> Here you select the partition scheme. GUID will boot MacBook only Apple will boot G5 only'
    HTH

  • ITunes library not showing everything on my disc

    I have iTunes 11.0.4.4 and I just notived my library is about 1/3 of what it should be.  I also found at least one song under the wrong Album.  If I look on my hard drive, I see all the proper albums & songs but iTunes does not.  I also notice I all of a sudden of a sudden have a lot of songs with the cloud icon next to them.  If I go to play them, I have to wair for iTunes to get them from the cloud.  I don't get this because I have never had any action where I have saved songs to the clouds.  Any ideas on what is going on here?
    Just to get a final rant in, I have been thoroughy disgusted with iTunes since verion 11 first popped up.  I take it this is just more crap from this version.

    I did some looking around and found some files & need to understand how I can repair this.  This is what I found:
    1. iTunes Library.itl  234K  9/17/2013
    2. iTunes Library(Damaged).itl  1,219K  7/04/2013
    3. iTunes Library.xml  1248K  9/17/2013
    4. iTunes Library 2013-05-28.itl  1200K
    I know the last one is a back up & I can probably just rename & move it, then redownload anything I purchased since then.  Before I do that I wanted to know if there is a way the damaged file could be repaired?  Or can the data in the xml file be considered valid & is there any way to extract that.
    Thanks

Maybe you are looking for