Office 2004 Works on MBP, Does not work on iMac

I have both an iMac and a Macbook Pro. I upgraded both machines to leopard. Office 2004 works great on the MBP. On the iMac it freezes up and requires a force quit. I tried uninstalling Office on the iMac. The installation assistant freezes when I try to reinstall.
Any hints or suggestions. Both of the mac's have basically the same install of leopard, neither machine is tricked out.

You are welcome.
2:31 PM Friday; March 17, 2006

Similar Messages

Group Chat feature in Office Communications Server 2007 R2 does not work in Windows Server 2008 R2 domains

   Hello to all, there are two confliting articles about this topic:
   1-
http://technet.microsoft.com/en-us/library/upgrade-domain-controllers-to-windows-server-2008-r2(v=ws.10).aspx#BKMK_Whatsnew : this one says that it does not work "The Group Chat feature in Office Communications Server 2007 R2 does not work in Windows
Server 2008 R2 domains". This article was updated in 2013.
   2-
http://technet.microsoft.com/en-us/library/ee692314(office.13).aspx: this other article says that it will function "Office Communications Server 2007 R2 Group Chat will function in a Windows Server 2008 R2 forest". This article was updated in
2010 and was refered by the first one.
   What is the correct support position for Group Chat feature in Office Communications Server 2007 R2 and Windows Server 2008 R2 domains?
   Regards, EEOC.

Hi,
I notice the following sentence in the link below “Office Communications Server 2007 R2, Group Chat will not function in a Windows Server 2008 R2 forest or when Group Chat member servers are joined to a Windows Server 2008 R2 domain.
We know of an issue with changes in Windows 2008 R2 that requires a Group Chat Client and Group Chat Admin Tools hotfix. The Group Chat Client and Group Chat Admin Tools hotfixes are currently scheduled for mid-April 2010.”
http://blogs.technet.com/b/nexthop/archive/2010/11/06/supportability-for-office-communications-server-2007-r2-and-windows-server-2008-r2.aspx
So in my opinion, if you update to the latest version of Windows Server 2008 R2, OCS Server 2007 R2 and Group Chat Client, Group Chat Admin Tools to the latest version, it should work.
However, the best method for you is make a lab to test the problem firstly.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

HT4995 My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

File sharing with MBP does not work

The problem is that I cannot connect to my first-gen MacBook Pro from my 2 Ghz Intel iMac in my own home network. I have tried opening all ports in the sharing menu without success. The laptop shows up in the finder window but no connection is made. There is not even an error message. It simply says (after a long while) that the connection failed. Nothing even happens when I try to click on the "connect as" button. This is true for file sharing and screen sharing. I can connect to the iMac from the laptop, ironically enough. I was able to connect both ways at one point. My set-up is as follows: airport express connected to modem/router; iMac and laptop connected wirelessly to airport express. Any ideas would be great. I am at a complete loss as the laptop has no other connection issues of any kind.
Update: I just got an error message for the first time: The server may not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again.

Connecting via "connect to server" in finder menu using afp does not work either. FYI. It just tries connecting for a long while and then gives me the following error (-36). The finder cannot complete the operation because some data in "afp://....." could not be read or written.

Script that worked in CS does not work in CS4 - multiple open page, print , pdf export and close

I had a script that worked great for me in Indesign CS. But now does not work in CS4. Anyone knows what needs to be done to make it work again ?
When I drop folder with indesign files on top of this script:
1. opens first page
2. turns specific layer on
3. prints using preset
4. exports using preset
5. close without saving
6. next page
Anyone who can give me solution or idea how this should work is greatly appreciated.
on open sourceFolders
repeat with sourceFolder in sourceFolders
tell application "Finder"
try
-- If you would like to include subfolders, you say - every file of entire contents of folder…
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias list
on error -- work around bug if there is only one file
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias as list
end try
end tell
if idFiles is not {} then
tell application "Adobe InDesign CS4"
set user interaction level to never interact
repeat with i from 1 to count of idFiles
open item i of idFiles
tell document 1
try
set visible of layer "ImagesTag_Layer" to true
end try
set myPreset to "letter size" -- name of print style to use
with timeout of 700 seconds
print using myPreset without print dialog
end timeout
set myPreset1 to "pdf preset name" -- name of pdf export style to use
set myName to the name -- name includes .indd should remove at some point
with timeout of 700 seconds
export format PDF type to "users:temp:Desktop:pdf:" & myName & ".pdf" using myPreset1 without showing options -- set path here format ComputerName:Folder1:Folder2:......:FileName.pdf
end timeout
close without saving
end tell
end repeat
set user interaction level to interact with all
end tell
end if
return 10 -- try again in 10 seconds
end repeat
end open

(Disclaimer: me not an AS guy!)
First thing I noticed is the interaction level is set off. If you comment out this line
set user interaction level to never interact
you might be able to pinpoint the exact error -- ID will display a standard "failed" dialog, hopefully showing the line that it fails on.
A quick question: the script assumes two presets in your InDesign: one for print ("letter size") and one for PDFs ("pdf preset name"):
set myPreset to "letter size" -- name of print style to use
set myPreset1 to "pdf preset name" -- name of pdf export style to use
Do these actually exist in your CS4, with the same (non)capitalization and spaces?

HT203171 The two finger enlarging works sometimes and does not work other. What to do.

Two finger zoom in and out does not work most of the time. The two finger tap does work. Why does the two finger zoom not work. Checked settings and it is on.

It only works in some Apple applications. For example, it works in Safari but not Firefox.

Installed latest Firefox update v25.0.1 on WinXP Pro 2002 SP2 and now it does not work. Reset does not work.

I just allowed FireFox to update itself. Now the version is at 25.0.1
Running on Windows XP Pro version 2002 SP2. FireFox has ALWAYS worked. NOW IT DOESNT. I can't even use it to connect to my own router login screen. IT IS DEAD.
RESET DID NOT WORK
SAFE MODE DID NOT WORK
What the F*** happened?

2.Remove Firefox from your program's list of trusted or recognized programs, then add it back. For detailed instructions, see Configure firewalls so that Firefox can access the Internet.
The detailed instructions go into firewall config bs. HOW DO I remove Firefox from my program's list of trusted or recognized programs? What does this have to do with Firewalls? Why is this happening in the first place? Can I revert to an earlier version. My Firewall is OFF. These instructions suck.

FaceTime does not connect, iChat video does not work, Skype video does not work (LION)

Hi everyone,
I am using OS X 10.7.3 2011 Macbook Pro 2.2 Ghz Intel Core I7 8GG 1333MHz DDR3 RAM 500GB HD.
What happens when I try to call someone in FaceTime: Webcam light is on and I see myself on my screen. It rings and after a while it says "X is not available for FaceTime (or similar).
In iChat I can text chat, but video calls do not work. In Skype, I can do audio talking, but when I try to use my video, it fails to connect.
This seems to indicate to me that there is a system-wide, rather than user or program-specific problem, in which my system cannot connect to others when using my webcam.
Can anyone offer any guidance on this matter? I am pretty tech savvy. On my home network I have tried port forwarding/opening and all that, without luck. I am worried that maybe I could have made a mistake in terminal or something some time ago, but I don't go in there very often and it is usually for very specific things.
Any help would be greatly appreciated. I am moving away for four months, and I really need this to work so that I can chat with my lovely girlfriend. Please see the notes below prior to commenting.
Cheers
Notes:
Internet is working fine. I use three different network, one of which is wired and works fine.
I have tried to create new users, still no luck
Webcam works fine in PhotoBooth
I am logged into FaceTime properly (this is simple, right?)
Reinstalling OS X to fix this problem is not an option
I have tried FaceTime with several people with several devices (e.g., iPad, iMac, iPhone)
FaceTime on my iPhone works with other people on same network

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

TS3367 facetime used to work but now does not work on any of my devices

I have been in regular contact until about 4 days ago using facetime on my iphone 5 imac 10.7.5. ipad 2 now none of these devices work from incoming calls from Philipinnes. Take note the caller had latest macbook pro 13 inch and is able to call Guam on fatetime with success. What is happening why is incoming calls alway failing. This has been 4 days running and is not good enough. Okay I havent got the latest updates but why in the late few days whould this effect anything. I mean 3 devices and none of them work. This is most frustrating and annoying. I have intead used skype which does work but at night time the camera is not as clear. Tanke note also earlier in the year I received calls from Vietnam and although I did have dropouts was always able to connect only these last four days have had no success. Also I have not been able to call out. The wireless has full bar and am near the modem that is not an issue. Unless there has been a recent change why is htis not working all of a sudden.

THere seems to be a FaceTime issue and some users who have been in contact with Apple support claim that Apple is working on this.
I have read many posts on the issue and have seen that there are many reporting that when they have updated their various devices to the latest software, the issue has been resolved.
You can wait for Apple to resolve the issue OR you can update everything to the latest software and see if this solves your issues.

COMMIT WORK AND WAIT does not work

Hello,
I know this question has been asked many times in various forums. But the fact remains that there is no definitive solution found for this problem which does not involve WAIT UP TO n SECONDS or SELECT until the DB commit has been completed.
We have an IDoc based inbound interface for creating Project Defintion and WBS Elements. Here is how the code looks like in the processing function module:
* Create Project Defintion
CALL FUNCTION 'BAPI_PROJECTDEF_CREATE'
EXPORTING
    project_definition_stru = lwa_proj_bapi
TABLES
    e_message_table         = lt_messages.
* If no errors
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    wait = 'X'.
* Other code
* Create WBS Element (BAPI could not be used because not all fields are allowed to be updated)
CALL TRANSACTION 'CJ11'
Now while creating the WBS Element, transaction CJ11 returns an error that 'Project does not exist'. This is not correct because the same Project was successfully created in the previous step.
It is clear that the problem is because of the delay in database commits.
This happens only with few IDoc's and not all of them. And of course, the problem does not occur if I induce WAIT UP TO n SECONDS after BAPI_TRANSACTION_COMMIT. But this is not the best practice.
The question is why BAPI_TRANSACTION_COMMIT does not wait even though we are forcing it to?
Thanks in advance
Sagar Acharya

Suhas wrote:
But i am baffled that although the COMMIT has happened earlier why is the data not updated in the DB ?
Well, it's just a [COMMIT WORK|http://help.sap.com/abapdocu_70/en/ABAPCOMMIT.htm] and not a [COMMIT WORK AND WAIT|http://help.sap.com/abapdocu_70/en/ABAPCOMMIT.htm#@@AND%20WAIT@@COMMIT%20WORK@@]. Let me quote the ABAP help:
If you do not specify the addition AND WAIT, the program does not wait until the update work process has executed it (asynchronous updating), but instead is resumed immediately after COMMIT WORK. However, if the addition AND WAIT is specified, program processing after COMMIT WORK will not continue until the update work process has executed the high-priority update function modules (synchronous updating).
@Sagar Acharya: Well, I thought you were looking for an explanation why sometimes the project isn't created (and you only had posted coding that showed details for step 1) - I'm trying hard, but my mind reading skills are rather limited yet...
So let's think about step 2 and 3: I assume that you made sure that your coding always references the correct WBS element. Again the commit (without wait) is done already via CJ11 (e.g. check form BUCHEN in SAPLCJWB). I'd expect though that the synchronous update mode should make this work. Since it doesn't, I'd try local update mode, which is what I'd choose in your case anyhow.
Apart from that my mind is pretty blank, except for the usual silly things to check. E.g. are you sure you're coding is correct, you are handling all return messages and log them for inspection later (e.g. application log), you are certain that the WBS was actually created by the same IDoc that throws the fit (and IDoc was not reprocessed), etc.
So maybe somebody else has better ideas...

Email submit does not work; print button does not work online

I installed livecycle 8 from cs3 onto a windows 7, 64 bit laptop
I created a sample form to see how it works (sample form http://neelyranch.com/dogbabysittingform.pdf )
Inside the program the form fills nicely, the print button works to my local printer, but the email submit does nothing
I saved and uploaded the file as pdf online and tried it from my browser (chrome)
Neiher print nor email submit buttons work
I saved it as reader extended via adobe 8 with no change
So, ??? am I doing wrong here
Just a quick edit here
I ran the form in Safari, mozila and ie8
in all three the print button did work online, but in all three the email submit did not.
nothing worked in chrome

Thanks for both of the responses. If you did select send then I did not receive anything. I did check chrome plugins and found a message requiring an adobe update for pdf 9.
I updated the pdf reader which gave me an update to pdf 11
I revisited the sample form in live cycle and the online print routine now works in chrome and ie8 but the send email does not send
When I select the send button after completing all of the other fields, I get a message 'preparing to send ...' then a window pops up with nothng in it but a greyed out top heading row, then it disappears and that is it.
Has to be something between the button and the email pgm that is not connecting (my default is gmail)
Same result in both chrome and ie8 - zip.
Suggestions?

How do I fix my volume when ringing it works but it does not work for games and movies

How do I fix my phone volume it works when the phone rings but for all the other things the volume does mot work for example games and other sounds don't work.

Hm, it sould like liquid damage to me.

Microphone works but dictation does not work

My dictation software was working fine then suddnely not so much. I have ensured it has been enabled, I have selected automatic detection as the default, I have choesen the internal microphone as the default, I have chosen the external microphone as the default, I have even deleted the
file://localhost/Users/williams/Library/Preferences/com.apple.assistant.plist file and rebooted, tested my internal and external microphones through the system preferences dictation setup (both register as working while in dictation preferences as indicated by the microphone symbol responding to sound), I've ensured the language was set to english (US) and closed all other programs.
Once the dication command is selected the microphone pops up and viola no response as if the microphone is no longer working!!! I am sooo much more productive with the speech to text function and really need it back. Anyone with any new/additional suggestions will be most welcome and I appreciate the help!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

OFFICE 2013 HOME AND BUSINESS does not work With Blackberry Destop Software 7.1

Hi,
I have read somewhere that I should use BlackBerry Desktop Software 7.0, but where can I found it to download it and install it?
Or when does RIM plan to release a new version of its BlackBerry Desktop Softwware that comply with Office 2013?
Best regards

This is maddening - I simply cannot synch my calendar with Office 2013. When should I expect an update for Desktop Manager that works with Office 2013?

Microsoft Office Word 2007 product key does NOT work

Hello,
my laptop model is Satellite - A505-S6980 and I've been using Microsoft Word but everytime I use it, it prompts me to enter a product key. Which I found on the bottom of my laptop and it is saying its invalid and after 25 times that I try to access microsoft word I will no longer be able to use the features it has. What should I do? if its the correct product key where can I find it? my microsoft word was already installed in my laptop so I do not have a CD. I've also already tried searching through microsoft forums and tried some stuff but it is not helping.
Any help would be appreciated. Thanks!

that is because the product key on the bottom of the laptop is for windows not office. the office that was installed on your laptop is a 60 day trial so if it has been that long you will need to buy it. if you dont want to buy it you can try open office which is almost the same and free. if you do want to buy it i believe if you buy 2007 you will get a free upgrade to 2010 but you would have to check on the microshaft site. 2010 comes out in june
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Office 2004 Works on MBP, Does not work on iMac

Similar Messages

Maybe you are looking for