Office Professional 2013 on Windows Server 2012 R2 Essentials
I installed Office Professional 2013 using emailed key - AAA-02768 * KEY ONLY EMAIL * Any attempt to run the installed software reports "
Must have Volume Licence edition of Office" I downloaded volume licence pack and get told my OS is not a VL edition. What do I need to get Office 2013 running on this server? One person will remote desktop into it, I purchased 5 RD licence
as I was told this was essential. I tried one solution downloading a trial, install from Install Application on Remote Desktop but that reported invalid key. Can it run? I know it is mainly a server, not a workstation, but surely Office can
run on it.
Hi Michelle,
Where did you download the volume license edition of Office 2013? At what exactly point did you get the "OS is not a VL edition" message?
Generally, to install Office 2013 on a server with RDS, you must have a volume license and you must use Office Professional Plus 2013 from the
Volume Licensing Service Center (VLSC).
For more information about the volume licensing for your situation, you should contact your local reseller or Microsoft partner.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Similar Messages
-
Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working
Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message:
Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2 at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue. This seems also to be a SP set up issue.
Thanks a lot.Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$IndexLocation = "C:\Search" #Location must be empty, will be deleted during the process!
$SearchAppPoolName = "SSAPool"
$SearchAppPoolAccountName = "mydomain\admin"
$SearchServiceName = "SSA"
$SearchServiceProxyName = "SSA Proxy"
$DatabaseServer = "W12R2DC1"
$DatabaseName = "SSA"
$spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
if (!$spAppPool)
$spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
$ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
# process stays at the following step forever, already one hour now.
$ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer $DatabaseServer -DatabaseName $DatabaseName
Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
(1) Crawler:Content Plugin under source Crawler:Content Plugin
Content Plugin can not be initialized - list of CSS addresses is not set.
(2) Warning for SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(3) Error for SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
(4) Error for SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
(5) Error Shared Services for SharePoint Server Search
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
Above errors keep being generated. Last step for SSA creation stay there forever. Any clue what is really going on? Thanks. -
Project Server 2013 on Windows Server 2012 R2
Can we install Project Server 2013 on Windows Server 2012 R2? Is it supported? I searched a bit but couldn't find any concrete information if it is supported or not.
From the article:
http://blogs.technet.com/b/office_sustained_engineering/archive/2014/03/03/announcing-availability-of-slipstreamed-office-2013-and-sharepoint-server-2013-with-sp1.aspx
Today, aligned with the SharePoint Conference, we’re announcing availability
of a slipstreamed SharePoint Server 2013 with SP1. SharePoint administrators
will be able to use this updated installer to deploy on Windows Server 2012 R2.
which I got linked from the following
http://blogs.technet.com/b/projectsupport/archive/2014/02/25/project-2013-and-project-server-2013-service-pack-1.aspx -
Sharepoint 2013 comes with prerequisitesinstaller.exe to install the software required for the actual Sharepoint installation.
I 've installed Windows server 2012 in the R2 edition as well as Standard edition, but installing the prerequisites ends with an issue for the Microsoft Identity Extensions (MIE) on both versions (screenshot).
The 2012 R2 server has been updated with all latest files by executing Windows update.
In case of the Server 2012 R2, MIE is already installed , but somehow the Sharepoint installation is missing something.
I al;so tried removing default install to let prerequisiteinstaller.exe to install it's own version, but that did not help.
When I skip the prerequisites remaining items, the Sharepoint installation stops directly , requesting the missing items.
I've tried several Sharepoint server installation files, including the 180 days free version.
Screenshots will be uploaded after my account has been checked......Hi Jay,
Installing SharePoint Server 2013 on a computer that is running Windows Server 2012 R2 could lead to unexpected behavior, therefore, Microsoft does not support SharePoint Server 2013 in Windows Server 2012 R2.
SharePoint Server 2013 with Service Pack 1 and SharePoint Foundation 2013 with Service Pack 1 will offer support for Windows Server 2012 R2.
Refer to:
SharePoint 2013 Support for Windows Server 2012 R2
In addition, as Dave suggested, for the sharepoint server issue, please post in the dedicated forum for a better response.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Not able to inistall Sharepoint 2013 on windows server 2012 r2
Hi ,
I am trying to install Sharepoint enterprise 2013 on windows 2012 r2. In very early stage i got issue when i ran prerequisite installer.
As we all know in this case we need to install prerequisite manually. I downloaded all the prerequisite and installed them manually. I have enabled all web and application role. then followed below link and installed all the prerequisite
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
SQL Server 2008 R2 SP1 Native
Client
Microsoft
WCF Data Services 5.0
Microsoft Information Protection
and Control Client (MSIPC)
Microsoft Sync Framework Runtime
v1.0 SP1 (x64)
Windows
Identity Extensions
Windows
Identity Foundation (KB974405)
Windows
Server AppFabric
CU
1 for AppFabric 1.1 (KB2671763)
All got installed correctly on server validated from control panel then i restarted the server and Ran SharePoint Set up
But still facing issue attached in form of image
Please help me on this.
kirteshHi kirtesh,
According to your description, my understanding is that you got an error when you ran prerequisite installer.
Please make sure the Windows Server Features and Role services are enabled in your SharePoint server.
Start > All Programs > Administrative Tools > Server Manager->Add Roles and Features:
i. Application Server
ii. File Services
iii. Web Server (IIS)
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Installing Exchange 2013 on Windows Server 2012 R2
Now that SP1 has been released, it is supported to run Exchange 2013 on Windows Server 2012 R2
But since it is not yet possible to download Exchange 2013 with integrated SP1 (slipstreamed), is the following installation procedure supported:
- Install Exchange 2013 (without SP1) on Windows Server 2012 R2
- Install SP1 on top of Exchange 2013
If this is not supported, can someone tell me when the Exchange 2013 with integrated SP1 (slipstreamed) download will be released?yes the SP1 is the full product. if you need step by step instruction to migrate to this new version you can get info here : http://buenoflex.com/install-exchange-2013-sp1/
Arnaud Buonaccorsi - GSX Groupware Solutions
http://www.buenoflex.com
http://www.gsx.com <= The monitoring solution for Exchange and Sharepoint -
Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2
HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil KumarYou really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist -
How to install SharePoint server 2013 in windows server 2012 R2
Hi,
I have SharePoint server 2013, and I want to install it on windows server 2012 R2 version.
Can you guide me on how to install it?,
or you if you got the download link of the full product of the latest release of SharePoint 2013 with sp1, please give me.
thanks in advance.Hi,
Now I could install SP 2013 following this article
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
I realized installing prerequisites software manually wont let Sharepoint 2013 to be installed in Windows 2012 r2 because of some issues, but with the use of power shell I could.
Thanks everyone. -
Is it ok to install Exchange 2013 on Windows Server 2012 Standard?
Hello everyone,
I'd like to know if it is ok/safe to install Exchange Server 2013 on Windows Server 2012 Standard?
As I started doing some research and noticed a page where Microsoft states they don't recommend running Exchange on Server 2012 Standard, and recommend making 2 different servers one for Active Directory and another for Exchange.
On that page they also listed some features that wouldn't work in case of Exchange is running on Server 2012. And that it may put a larger data load if setup this way.
I am hoping someone knowledgeable can explain and tell me if it is safe to use such setup or if it is better to use something like SBS 2011 Standard instead, which has Exchange included?
Has anyone installed Exchange 2013 on Server 2012 Standard successfully and used it for more then several months without problems?
Also just to give an idea on my background, I've been in IT field fairly long but haven't really updated to newer versions much and mainly used SBS 2003 and 2008 only with a few clients so haven't used 2008 too much.
Thanks in advance.Few things to note.
There is
NO SBS in 2012
All you need is a Std edition of Windows for Exchange 2013, as there is no difference in features between Std and Datacenter as far as Exchange is concerned.
For 10 users, you can have one box with both AD and Exchange. It is not MS recommeded, but it IS supported.
Rajith Enchiparambil |
http://www.howexchangeworks.com | -
Not able to install Exchange Server 2013 on Windows Server 2012
I got an error while installing exchange server 2013 on windows server 2012 : "The registry key "SOFTWARE\Microsoft\Exchange Server\v15\Pickup" does not exist under "HKEY_LOCAL_MACHINE " any related solutions highly appreciated
thanks :Hello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support -
Hi All,
I Just installed Exchange Server 2013 in Windows Server 2012 and trying to connect Dynamics CRM 2013 (DNS).
The Installations Success full but unable to load the EAC page by using the following URL
https://servername:port/owa/auth/logon.aspx
I have cross checked in Exchange/owa/auth folder don't have the "logon.aspx" file
But the auth folder have the "logoff.aspx"
I installed many time freshly in separate WS-2012 but it not contains that logon.aspx
I want access the Exchange Administrator Center
Please Help me to solve it
IIS Exchange (Missing of logon.aspx)
SRKD0808Hi All,
I sorted out this problem
Actually we have to run these 2 commands in Domain Control, But what i did I just run this
1) setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Command in Domain Control we don't need to run the 2nd command, Because I already try to installed exchange 2013 very first time it success and after some modifications
it gone.
That time it will ask you to provide Organization name, Once you give that it will create the Organization name in Domain control and it will save the settings when
you install first time
Because of this reason It is failing to run these 2 command
Finally what i did I just revert back my Domain control snapshot & Exchange server as well
Then i started freshly Installation in DC and Exchange server 2013 successfully installed
URL http://servername/ecp/default.aspx
Whole Process will be here
Exchange Server 2013 Step by Step Installation In Windows Server 2012
SRKD0808 -
Access Database (.mdb) on Windows Server 2012 R2 Essentials
Hi guys, thanks for your time!
SCENARIO:
- Windows Server 2012 R2 Essentials
- Windows 7 Ultimate Clients (3 clients)
- VB6 application on clients using a MS Database (.mdb) hosted on the server.
- Clients access the database (.mdb) via a mapped network drive (K:).
PROBLEM:
- Microsoft Database (.mdb) on server gets corrupted frequently.
- Clients don't "flush their changes" back to the database: database was not updated.
WORKAROUND:
- Database was moved from the server to one of the Windows 7 clients.
- Application is running OK.
CONFIGURATION:
- Permissions are correct: network and NTFS.
- No faulty network hardware: switch, cabling, NICs.
- Computers and Server hardware is new.
- UPS are used everywhere.
SOME LINKS:
SMB 3.0
- Opportunistic Locking and Read Caching on Microsoft Windows Networks.
- Windows 7 cannot
open the shared MS Access database if it's opened by another user
- Initializing the
Microsoft Jet 4.0 Database Engine Driver
- Moved to
Server 2012 getting Access Database Corruption
Oplocks
- Configuring
opportunistic locking in Windows
- Understanding
offline files
- How to
enable and disable SMBv1, SMBv2, and SMBv3
- Is it possible to
monitor and log actual queries against an Access MDB?
Now, server is useless if it is not hosting our database. Any ideas, please? Do I need to diagnose using Wireshark? Or using Sysinternals Process Monitor? I think that is a waste of time.
Thank you!Thanks for your reply.
Software is from a 3rd party provider. It currently supports concurrency. It was deployed on Windows XP. SQL Server would be a nice upgrade, however that is
not an option.
Something has changed with newer versions of Windows. That is what I am going to study in a lab I prepared with a real server and some clients.
File-sharing databases (Microsoft JET databases) are very old technology even before I was a college student. However, I have been very busy researching this technology.
It was made for multi-user environments. It is highly tied to file sharing services from Windows: SMB protocol.
Windows XP, Vista, 7 and 8 use different versions of this protocol. I think that is the root of the problem. With old technology, application was running fine.
With new technology, application is troublesome. I will check several things: JET drivers vs. ACE drivers, SMB tweaks, etc.
UPDATE:
Basically, there are 4 general answers to this issue:
1) Migrate your Access Database to SQL Server Express (or another RDBMS engine).
2) @Server: disable SMB 2.0/3.0 protocol stack by powershell command. Network speed decreases.
3) @Clients: disable client redirector caches by using regedit.
4) @Server: disable the leasing on the file server.
5) @Server: tuning Broadcom NIC parameters.
References:
- https://technet.microsoft.com/en-us/library/ff686200(WS.10).aspx
- https://msdn.microsoft.com/en-us/library/windows/desktop/aa365433(v=vs.85).aspx
- http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Windows/Q_28482197.html
- http://tipsntricks.sherr.co.uk/stop-smb-corrupting-files/
- http://www.dataaccess.com/whitepapers/opportunlockingreadcaching.html
- https://social.technet.microsoft.com/forums/windowsserver/en-US/67baa9fd-5eaf-438e-9cc4-dc1a531b9e19/disabling-oplocksmb2-vs-fileinfocachelifetime
- https://social.technet.microsoft.com/Forums/windowsserver/en-US/7336d31b-6c24-468a-9c47-750244ae3a8c/moved-to-server-2012-getting-access-database-corruption
- https://social.technet.microsoft.com/Forums/en-US/e9567167-22db-4b8c-9f96-a08b97d507f9/server-2012-r2-file-server-stops-responding-to-smb-connections
- http://support2.microsoft.com/kb/2957623
- http://support2.microsoft.com/kb/2899011
- http://support2.microsoft.com/kb/2955164
- https://social.technet.microsoft.com/Forums/en-US/7bd0aa5b-eb95-40a8-a56d-c6013273665c/extremely-slow-smb-network-speed-server-2012-r2?forum=winserver8gen -
Hi,
I need to find out how to do something?
I have Windows 8.1 pro running on my PC and its part of a domain which is Windows Server 2012 R2 Essentials, it all runs perfectly except for a little niggle where my Win 8.1 PC locks after its not used for a short time. What I want to find out is
how to change this so it no longer locks when idle? I know this is a security feature but as its just my home pc it can be very annoying to log in again after walking away from the PC for a few min's.
I've had a look through the default domain policy but there are so many settings that I can't find it, that's even if there is a setting there?
Anyway can anyone help?
Thanks
JK
JK MCPHi,
We can try to implement by use High performance power plan or GPO to prevent computer from locking down:
Refer to the solution here:
http://social.technet.microsoft.com/Forums/en-US/0863112d-ee54-4808-9d27-0380d7bf04b0/gpo-to-disable-lock-computer-?forum=winserverGP
Also, you can check if there is any task scheduled for idle:
Task Conditions
http://technet.microsoft.com/en-us/library/cc721902.aspx
Hope these could be helpful.
Kate Li
TechNet Community Support -
[Forum FAQ] Introduce Backup in Windows Server 2012 R2 Essentials
Windows Server 2012 R2 Essentials provides reliable ways to perform regular backups of your server and backups of your network computers.
1. Server Backup
Description:
Backs up your server running Windows Server Essentials. The data is backed up to an external USB drive. You can also perform full system restore of server.
Operations:
On Dashboard, please select DEVICES and then navigate to the server which you need to backup. Right click the server and select Set up backup. When set up complete, you will be able to
Start a backup for the server. (Figure 1)
Figure 1
More information:
Manage server backup in Windows Server Essentials
Restore or repair your server running Windows Server Essentials3. Microsoft Azure Backup
Descriptions:
Performs an online backup of files or folders on your server. When you use Azure Backup to back up server data, the information is encrypted by using your passphrase before it is uploaded to a secure datacenter on the Internet.
Operations:
1) Open Dashboard and follow the path: HOME-> Get Started-> ADD-INS-> Integrate with Windows Azure Backup. Then as Figure 3 shows, you need to “Click to sign up for Windows Azure Backup” and “Click to download Windows Azure
Backup integration module”.
Figure 3
Please note: when you click to download, you may encounter the issue as Figure 4 shows. If so, please follow the path:
Tools-> Internet Options-> Security->
Trusted sites-> Add this website to the zone and add
http://downlaod.microsoft.com,
https://activedirectory.windowsazure.com in Trusted sites in IE. (Please uncheck
Require server verification (https:) for all sites in this zone). Then please check if you can download as normal.
Figure 4
2) After you download the OnlineBackupAddin, please run it. Then begin to install the add-in. (if any issue occurs in your installation of add-in, please navigate to C:\PrgramData\Microsoft\Windows Server\Logs folder and check
InstallAddin log file if you can find some clues.)
3) During your installation, KB 2873390 may be required. Please download the update package and run it. Then Windows Azure Backup Agent Upgrade Wizard appeared. Please follow it and complete as Figure 5
and Figure 6 show.
Figure 5
Figure 6
4) Then please re-open Dashboard, you will find ONLINE BACKUP option. (Figure 7) There will be three steps that you need to do: (i)
Upload a certificate. (ii) Register your server.
(iii) Configure backup settings.
Figure 7
(i). Upload a certificate. (In this example, we use the second option: Upload certificate to Windows Azure Backup vault)
Please logon Windows Azure, select RECOVERY SERVICES and click
NEW. Follow the path: RECOVERY SERVICES-> BACKUP VAULT->
QUICK CREATE. Please type NAME and select
REGION, then click CREATE VAULT. When create completes, please click the name of this new recovery service that you create. As Figure 8 shows. Then select Manage Certificate to add or update the certificate file (.cer) that contains
a public key for the vault. The certificate is used to register servers with the vault.
Figure 8
(ii). Register your server
On Dashboard, navigate to Online Backup and click Register. (Figure 9)
Figure 9
Then it will check the certificate. And then you need to set a passphrase to secure your data. (Figure 10)
Figure 10
When you set passphrase complete, please click Next to continue. When register successfully. You will see Figure 11.
Figure 11
(iii). Configure backup settings
When register completes, please click Configure Online Backup. Then you can follow the Configure Online Backup wizard to configure online backup (add folders), specify the backup schedule, specify the backup retention policy and choose bandwidth usage. The
all process will be shown in Figure 12-16.
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
After all configurations complete, you will be able to see that the server integrates with Windows Azure Backup. (Figure 17)
Figure 17
On the Dashboard in server essentials, you will be able to start backup online. (Figure 18)
Figure 18
After backup online, you will see the protected data as Figure 19 and Figure 20 show in Dashboard and Windows Azure.
Figure 19
Figure 20
More information:
Manage Online Backup in Windows Server Essentials -
Windows Server 2012 R2 Essentials will only recognize 1 USB drive at a time in primordial pool
I have a new install of Windows Server 2012 R2 Essentials. I added 2 identical 2TB Seagate Expansion USB drives. Initially they had a volume on them, so I deleted the volume in order for them to be added to the primordial pool and storage spaces,
etc. They both show up fine in Disk Management, but only 1 of them at a time will show up in the primordial pool. I have tested moving them to different USB ports, trying only 1 disk at a time to ensure that both are good, rebooted, attached them via
a USB hub... but nothing works. In my most recent test I plugged in only one and did a rescan. I see it as Disk 1 in both Disk Management and Primordial pool. Then I added the second drive and did a rescan, it showed up as Disk 2 in Disk Management
and when I did a refresh in storage spaces, I can see that it changed to only see disk 2 in the primordial pool. What can be causing this?To use USB disks, each disk must be plugged into a differs USB controller. A hub will obviously be on one controller, so that won't work. But many computers have only one or two controllers on the motherboard and then use port multipliers (basically internal
hubs) to support more ports. So you have to know your motherboard and which ports are on which controllers. And again, only one drive per controller.
Maybe you are looking for
-
New hard drive and problems with sync
My problem is that I have installed a new hard drive (Win 7) which I installed itunes on and I cannot sync my ipod. I still have my old hard drive (windows XP) with the original itunes on it and I have tried to back it up but it still wont do it. I
-
Going for dump while using field symbols
Hi all, I am using field symbols in my program. Program is going dump for some company codes and working fine for some company codes. I am confused. Please check this code where the error is shown. LOOP AT i_final ASSIGNING <fs_final>. AT NEW
-
Has anyone come across a working VESA desk mount arm that support the 24" iMac's 25 lbs? Anybody have any experience with the Egrotron LX (rated at 20 lbs) or the Moview mv17dc (rated at 25 lbs)? Is there another DESK MOUNT arm that anybody has exper
-
Need help with method development
I want to stop the takeInput method when the user enters -1. But the way it is currently written, it just continues to repeat, and I can't figure out why. What needs to be changed? import java.util.*; public class Appt public static Scanner kb =
-
Display build number in application.
I found a few old threads about this with no solution, but nothing recent. Does anyone know if there is a simple method to display the version number of an executable built with the application builder. I have the build set to auto increment this, an