Officejet 4630 ink drying message popup. How do disable

Received printer for Christmas. Installed fine. Prints fine.
Issue is pop up message telling me ink is drying to enable duplex operation. The pop up steals the mouse cursor and so effectivally prevents other usage of the computer while printing duplex. I don't need the pop up for every document I print let alone every page of every document.
Where is the option to disable this pop up message.
Thanks
dchoyt

Hello dchoyt.
I understand your concerns. What is your operating system on your computer? Windows or Mac? Please follow this HP document on Printer Driver Setting For A Windows Computer.
In this document it will provide step-by-step information on how to disable "Dry Time" and/or how to disable "Duplex" options.
Please inform me if this resolved your issue or not.
Looking forward to hear from you.
I worked on behalf of HP.

Similar Messages

HP Officejet 4630 Printer....how do change from the default setting when printing from the web?

HP Officejet 4630.....Windows 8, 64-bit
When printing from the web I am not able to change the print size.
1. Click File on Menu bar
2. Click Print open dialog box
3. Click Properties open printing shortcuts
Everything in Printing Shortcuts have a lock on it. Including Factory Default.
Any and all help with this problem will be appreciated.
Thank you in advance

I posted this to the wrong board. Can it be move to the right one?
thank you

TS3276 Auto message reply: How to disable.

Years ago I set up an Auto Reply that "I am away," then did not use the Mail account for a long time.
I am now actively using my Mail, and recipients are forwarding back to me my Auto Reply that "I am away," but I do NOT have a Rule set for this.
Anyone know how this can be, or how to disable? Another puzzler - it seems to be intermittent .

Hi Nathan,
I believe this message is related to the Bluetooth task BTTRAY.EXE, and I have found the following link to a forum item which describes how to prevent the pop-up message appearing :-
http://delltalk.us.dell.com/supportforums/board/message?board.id=pw_input&message.id=273
I haven't tried it myself because the pop-up message is only transitory and doesn't cause me any particular problems.
regards,

Message-Popup: How to display a number (from variable) in hex-format?

Hello,
i have a numeric FileGlobal that is display in a MessagePopup-step with str(FileGlobal.param1)
How can i change this that it display the number as hexvalue.
For example if Number is a 10, then the MessagePopup should display a 0xA.
Thanks for help
Solved!
Go to Solution.

HI,
You should try this expression Str(FileGlobal.param1,"%X",1 ,True)
Hope this helps
Rodéric L
Certified LabVIEW Architect

Caps Lock message appears - How to disable it?

Hi
I've recently been away, and on return am finding that pressing the Caps Lock key (or indeed the scroll or num locks keys) sees a message pop up in the right hand corner of the screen to tell me they are on/off. (see linked picture)
http://i49.photobucket.com/albums/f286/bigfatuglybloke/SCREENGRAB.jpg
I'm guessing I've done something clever, but I'd like to switch this message off.
Has anybody got any idea how to do this?

Hi Nathan,
I believe this message is related to the Bluetooth task BTTRAY.EXE, and I have found the following link to a forum item which describes how to prevent the pop-up message appearing :-
http://delltalk.us.dell.com/supportforums/board/message?board.id=pw_input&message.id=273
I haven't tried it myself because the pop-up message is only transitory and doesn't cause me any particular problems.
regards,

Messages app - how to disable on another computer

I logged in temporarily on another computer, not related to my home office.
When I log into my Mac from home, I get a message that "computer xyz" (computer where I was working over the last week) was associated to my Messages account.
Is there any way to turn off or disable the Messages app functionality on that system - remotely ?
I won't be back at that location for some time. I can't be 100% sure the computer is being used by anybody, as this may just be a delayed message.

Hi,
At this point you need remote access to that computer.
There is no Self help to De-register a Mac like there is for an iPhone https://selfsolve.apple.com/deregister-imessage
Accessing the computer and opening the Messages app to delete the Apple ID is only part of the issue.
You can Sign Out but this leaves the .plists that holds your accounts Info and alternatives still readable in the ~/Library/Preferences
It also leaves the Keychain items for the IDS: yourAppleID-Auth Token in place.
Ideally it might pay to delete the whole ~/Library/Preferences.
If you think that this may be too deep then remove all the com.apple.iChat.*.plist items
Anything with iMessages in it.
Plus com.apple.imagent.plist and anything with IDS in the name (most importantly the one with madrid in the name).
Do the same with the Keychain. (Any item with IDS in the name)
Deleting your name from the iMessages account in the app does not remove it from the .plist
Nor does it remove your alternatives that are likely to include your iPhone number.
It would be worth deleting the contents of ~/Library/Messages as these database items hold the iMessages chat history.
Saved chats are in ~/Library/Containers/com.apple.iChat/Data/Library/Messages/Archive
8:50 pm Sunday; April 5, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Message popup Validation

Hi,
When using a message popup how best can validation be done?
I need to check that the used has entered 3 letters.
Thanks
Simon

If you use the standard "Message Popup" step you can determine the length of the user input within the Step's Post-Expression.
Say you create a Local variable "input_valid" and use the following post-Expression in the Message Popup step:
Len(Step.Result.Response) == 3 ? (Locals.input_valid = True) : (Locals.input_valid = False)
Then you can expand from there with e.g. a while loop around the Message Popup.
This does not quite fulfil your requirement though as it only checks for the length of the user input and not whether it has three letters.Could as well be two letters and a number. But maybe that is already good enough for you, in this case you wouldn't need a code module.

How to disable security warning while printing(Silent Print) from Javascript?

We have a webapplication through which, we are creating a pdf document and trying to print it sliently ("Silent Print").
Users who are having latest Adobe version, were getting javascript warning message. However, those with older versions able to "Silent Print", without any warning messages.
How to disable this security warning while printing from Javascript?
Warning message: "A script has requested to print an Acrobat file. This could print an entire document. Do you want to proceed printing?".
Appreciate for your kind help.
Thanks.

It's a security warning so it can't be bypassed by anything within the file.

HP Officejet 4630 e-All-in-One Printer Black Ink not Working

My HP Officejet 4630 e-All-in-One does not print black ink but the color ink is working perfectly fine even though the ink status shows that there is black ink left. After I've changed a new black ink cartridge, it will start to work again but after one day it stop printing black ink again. I've only printed a page the previous day and the ink status shows that there's black ink left in it (close to full). I've tried the methods stated here (http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03882718&cc=sg&dlc=en&lc=en&product=5305051) but the black ink still doesn't work. So how can I solve this problem??

Hello @3oshua,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Officejet 4630, you are unable to print in black ink, even after replacing the cartridges.
I see you have exhausted the steps listed here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, with no success.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. I highly recommend you call our technical support at 800-474-6836, to see what options they have available for you. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Brand new officejet 4630 with black ink problem and ok button doesnt work

Hi! I bought a new printer today, officejet 4630 and it included toner cartridges in the box. Iset it up like the sheet in the box said. After I had filled in date etc, I put in the ink ( and yes, remembered to check that it was compatible and take of the tape) Then this message showed in the display and still does: "Ink cartridge(s) problem. The following ink cartridges must be replaced" and a black dot. The cartridges were brand new and came in the same box as the printer. I have tried a reset ( taking out the cord for power supply, wait 60 sec etc) I also saw in Hp support you were to press "ok" to get rid of the message before restart. I can't press ok. It just beeps. No matter what button I press. Suggestions? Of course I can try with a new cartridge, but to paying $20 for a new cartridge when it was included in the box and should work is not ok.

Hi , Welcome to the HP Forums! I understand that you ar getting the error, "Ink cartridge(s) problem. The following ink cartridges must be replaced" with your black ink cartridge on your HP Officejet 4630 printer. I am happy to look into this cartridge error for you! Please, try the steps within this guide, A 'Cartridge Missing,' 'Cartridge Problem,' or 'Incompatible Ink Cartridges' Error Message Displays for HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-All-in-One Printer Series. If this guide does not resolve your issue, please contact HP, phone support for further assistance, as the ink cartridge(s) are under warranty. (After you fill out the information, you will be given a phone number.) If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Best of luck! “Please click the Thumbs up icon below to thank me for responding.”

I'm getting a popup messages "uninstal' how do I stop this?

Question
I'm getting a popup messages "uninstal' how do I stop this?

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

How can I disable the low ink warning messages.

How can I disable the low ink warning messages. The Photosmart Plus B210 printer is connected wirelessly to my Mac over a home network..

Open up a terminal (use spotlight to search for 'terminal')
Find the process ID of the HP Device monitor by doing
ps -eo pid,command | grep "HP Device Monitor"
The process id will be the number that is printed. Sometimes you may see two results, the correct result to use should print "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"
Then using the number you got from the first step, run the following command.
sudo kill -9 <pid>; sudo rm -rf "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"
You will be prompted for your admin password.
Below is an example of when I ran it:
John-MacBook-Pro:~ john$ ps -eo pid,command | grep "HP Device Monitor"
90509 /Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor
90513 grep "HP Device Monitor"
John-MacBook-Pro:~ john$ sudo kill -9 90509; sudo rm -rf "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"

Officejet Pro 8600 error message on startup "Printer or ink system problem"

My networked HP Officejet 8600 ran out of black ink...changed cartridge, then error message that required the C,Y, & M cartridges also be replaced...done...now get a startup "problem printer or ink system" message.
Have reseated the printhead and cartridges multiple times. Same message at startup.
Suggestions please!

Not resolved...Did all items...still got message (as so many others have also).
Not solved...unhappy that this occured the month after warranty
expired...then read the many, many other experiences of others
that seem much too similair to my situation...makes me feel that HP
potentially built-in a failure of this nature...ordered a new printhead.
If this fixes the situation and I get a similar happening 13 months from now...
my ambulance chasing relative may have great grounds for the career making
class action....

How do I enable the low ink warning message on the HP 7520 e all in one printer

How do I enable the low ink warning message on the HP 7520 e all in one printer? Or is it even available on this model?
This question was solved.
View Solution.

ccardwell,
Welcome to the HP Forum.
The following Assumes a Recent Windows Operating System is installed on your computer...
The Photosmart 7520 allows you select when you would like to receive Ink Alerts:
Right Away -- as soon as there is a need for attention
Only when you initiate a print job
The Full Feature Software installation procedure places the Printer Assistant shortcut on the Desktop.
Install Full Feature Software – Photosmart 7520
Open the Printer Assistant shortcut > tap on the Estimated Ink Levels icon (along the top ribbon) >
Toolbox opens > Select tab Advanced Settings >
Under Show Alerts > CHECK desired setting
Click Close
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

How to open a message popup and keep the sequence running ?

I have some steps in my sequence to initialize communication ports that takes a few seconds. As i have the trace off i want to display a message popup to tell the user that the sequence is doing the init. After the init steps are done i want to close the popup out of the sequence without pressing any button.
Is there a possibility in TestStand to do this ?
The normal Message popup stays until a key is pressed and even pauses the sequence while active.
Thank for help.

You could call your message popup in a subsequence as new execution and terminate this execution programmatically after your init steps have finished.
In order to do this you have to specify (module) the sequence call step that calls your subsequence:
-Multithreading and Remote Execution = Run in a New Execution
-Settings: Initally Hidden and Tracing disable, Restartable, Close Window when done, Wait for Execution to complete: Do not wait, Process Model Option: Do not use a Process Model
-Store an Object Reference to the New Execution in: e.g. Locals.ExecutionRef
After your Init steps you insert a ActvieX/COM Action Step that terminates the new execution:
-Object Reference: Locals.ExecutionRef
-Automation Server: NI TestStand API 3.1
-Object Class: Execution
-Call Method or Access Property: Call Method
-Method: Terminate
This will terminate your new execution showing the message popup.

Officejet 4630 ink drying message popup. How do disable

Similar Messages

Maybe you are looking for