Officejet Pro K5400 printing problems after update to Mavericks OSX 10.9

Hi,
I have printing problems with my Officejet Pro K5400 after update to Mavericks OSX 10.9.
Now after printing 1 page the printer prints an extra page with '2345X' sentence on it. As this problem started right after updating, I suppose there is a problem with an update.

This patch did solve our problem with the K5400 feeding a "blank sheet".
Thank you.

Similar Messages

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Printing problems after updat maverick

After update to maverick mine hp deskjet 3070a ,cannot print wirelessprinting anymore.the AirPrint is not in the list and, bonjour printing is not in the list *** Well Before i update the printer was working allright with wireless connection. No problem what so ever. I can only choose USB printing. Can you please give me Some advice.

I have the same idential issue with a HP Laser Jet Printer P1100/P1102w... If you tick the netwrok printer sharing box on the USB connection the Bonjoour printers show up then almost immediateky dissapear? Only on a few occasions do they remain stable enough to click on and add, however it fails to support AirPrint and will not print over WiFi... it does not pick AirPrint as the driver on AutoSelect and even if I select the printer driver manually it still will not print over WiFi... USB is fine however. I have reset the printing system, I have done a WiFi card reset, I have done all the troubleshooting I can do but still there is an issue? Is there anything else I can do?
I will be getting HP support to remotely shoaddow my Mac in an attempt to get a successful installation however I suspect the issue will persist? All the Apple Updates are done and also the current drivers are installed. I suspect this is an Apple Bug that needs to be fixed asap? It is a brand new HP printer that is supposed to support AirPrint...Very frustrating Apple?

Officejet Pro 8600 (Printer Failure after changing ink)

I use an hp Officejet Pro 8600 on a windows 8.1 operating system. About a week ago i replaced my black ink but after restarting my printer, an error message arreared on my screen which reads ' There is a problem with the printer or ink system. Turn printer off, then on. If problem persist, contact HP'. I have since turned off my printer and turned it back on but that has not solved the problem. What do i do next?

Yes if the printhead is damaged, it would need replaced (to print). But beforedo that, please double check it's not something simple like forgot to removethe protective cover, didn't seat the cartridge properly, etc. see: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Printing problems after update to 10.2.1.

After updating to 10.2.1 in XP, when I try to print my Reproduction Files in White Mosaic format, the list of songs prints correctly but the CD insert prints a black square while before it printed the covers, pictures or images I had added to each song. Any help? Thanks

Had the same problem, in Windows Seven, Itunes 10.2.2.12. I did not find a fix for it, but I did find a work-around. I printed the jewel case insert to a pdf file (using cutepdf writer - available at cutepdf.com), then printed the pdf (on the same printer that wouldn't print correctly from Itunes) and it worked fine.

Macbook Pro Users - Skype Problem after updating?

Do you guys have the same problem?
After updating your Mac , Skype does not work properly.
Either it lags, or your video just do not pop out.

What backups do you have?

Problems after updating to Maverick

Since updating to Maverick 10.9.1 this week I'm unable to save a file when working in PS CC or even change the name of folder in Bridge. Anyone else having the same problem? I also noticed that sometimes when I try to Save As, PS displays this as the destination folder (/Users/.../20140221/ohjgz86XT4WFz3DpQRhs+Q/IMG_022.jpg) No idea what that is directing me to. The only thing I've found is that sometimes I can save a file to my Desktop then move it into PS. It still doesn't solve the problem with managing folders in Bridge though. Any ideas or similar experiences?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Color Printing Problems after update dec28/07

Last night I installed the latest updates for PS CS3 on 2 machines and both machines have the exact same color issues while printing with two different Canon printers.
The Problem:
Since this last update all images I try in print from 16bit ProPhoto or AdobeRGB 16bit, converted from Canon RAW through ACR look sepia tone, there is virtually no color (images still look as they did before on my monitor). In order to get the color to print I must convert image profiles to 8 or 16 Bit sRGB. I have not changed any settings after the update and confirmed that the update made no changes to the printers set up. sRGB 8bit jpeg images print color as seen on the monitor.
BOTTOM LINE: I can no longer print ProPhoto or AdobeRGB color space on my 8 color Canon Printer

Thanks Jeff
Both computers are PCs, one on XP, one on Vista, and printers are Canon i9900 and Canon ip4000 both are printing exactly the same way. Swoped printers between PCs with same outcome. Only changes made to both PCs was the CS3 update.
Jeff, I thought the problem may stem from the ACR RAW conversion as regular sRGB jpegs print the color as seen on my monitor. I have also submitted this question to the general PS forum...
Thanks again for taking the time to reply..

Print problem after update

I have upgraded my Mac pro to OSX 10.8 now my HP laserjet 2300 does not work anymore. Is there a trick to solve this?

This might help:
Reset printing system: http://support.apple.com/kb/PH11143?viewlocale=en_US

Officejet pro L7780 printer freezes after new wireless router wpa2 code is entered.

I recently changed routers and attempted to add the new WPA2 code. Using the wireless setup wizard on the printer it allowed me to get to the very end where the printer says network installed press OK to continue. Unfortunately pressing OK did nothing and all keys/buttons on the control panel do not respond. Tried removing the software, resetting the control panel by holding 6 & # during power off/on no help. Running windows 7 bit.

It could be that the printer does not support WPA2. Try WPA.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

MAIL crashing after update to MAVERICKS OSX

I have updated my mac book pro , early 2011 model to osx mavericks and since then i cannot open my mail app and whenever i try to open it crashes. Please help as i really need to operate my emails.

I have updated my mac book pro , early 2011 model to osx mavericks and since then i cannot open my mail app and whenever i try to open it crashes. Please help as i really need to operate my emails.

Drivers for HP OfficeJet Pro K5400 printerfor windows 2012 R2

Hi,
The HP site doesn't list Windows server 2k12 R2 when trying to find driver for the "HP OfficeJet Pro K5400" printer.Is there a way i can use it anyway?

I'd try the Windows 8.1 driver since it is same kernel.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=2511767
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

After installing latest OS update I can no longer print from my iPad to my HP Officejet Pro 8600 printer. Any suggestions?

After installing latest OS 5.1 update I can no longer print to my HP Officejet Pro 8600 printer?   Suggestions?

Installing the new os may have tricked one of the three devices involved. If it used to work, it will again.
Reboot the printer.   Reboot the router. On the pad, general, reset, reset network connections.
Make sure all the devices are on the same wifi network.   Talk nice to it.

Printing from InDesign CS4 on Mac Snow Leopard to HP officejet pro K5400

I recently started using a Mac Snow Leopard with InDesign CS4; for awhile it printed fine. Then, dealing with a book mss, I had to get InDesign to convert the document to a PDF, and since that time, the Officejet Pro k5400 will only print in what appears to be the best quality, even when I tell it to print in fast draft, and even set that as a preset. Anybody had that problem? Anybody have any suggestions as to what is going on here? How can I get the printer to print in fast draft? Thanks for any help,
Knob Man

Hi kajuntwin,
I understand that you are having and issue after updating your desktop. I am referring you to this post by MBJustice who is currently working with other customers on this issue.
I hope this helps,
Thank you.
I worked on behalf of HP.

Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on

Hello everybody,
the printer HP Officejet Pro all-in-one 8500 (A909a - product n. CB022A) cleans printheads every time I turn it on. This problem affects any HP Officejet Pro 8500 printer, it isn't a problem only of that one I purchased. It is an annoying and irritating bug because the printheads cleaning at each power on implies two bad disadvantages:
ink waste (each printheads cleaning process consumes some ink);
too much time (2-3 minutes) to get the printer ready after power on.
I upgraded my printer with the last firmware available on the HP site (firmware ver. DLM1FN1006BR) but the bug is still present.
At this point I ask:
there exists a way (or procedure) to disable this unnecessary automatic cleaning at every power on?
Can someone contact HP engineers or tell me how contact directly one of them to indicate the bug and ask a new firmware update?
Please don't tell me to leave the printer turned on all the time or that the printheads cleaning at every power on is a normal behavior! Where is then power and ink saving claimed for this printer model?
I hope to receive a solution for this problem. Thanks in advance to everybody will help me!
This question was solved.
View Solution.

The servicing when the printer is turned on is normal and is required to keep the printheads healthy (not clogged). See here for information.
As for power savings, the printer will automatically go into a low power mode when not printing for some time. It is not necessary to turn the product off and on to save power.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet Pro K5400 printing problems after update to Mavericks OSX 10.9

Similar Messages

Maybe you are looking for