OHS not passing the client certificate in headers to WebLogic 11g

I'm struggling with the ssl configuration on Oracle HTTP Server, I have it configured so that it request the correct client certificate, I select it but when it performs the http redirects between itself and WebLogic none of the headers I configured in the httpd.conf are passed to WebLogic.
ssl.conf
# OHS Listen Port
# Listen 4443
Listen 443
<IfModule ossl_module>
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# Some MIME-types for downloading Certificates and CRLs
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
SSLSessionCache "shmcb:${ORACLE_INSTANCE}/diagnostics/logs/${COMPONENT_TYPE}/${COMPONENT_NAME}/ssl_scache(512000)"
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
<IfModule mpm_winnt_module>
SSLMutex "none"
</IfModule>
<IfModule !mpm_winnt_module>
SSLMutex pthread
</IfModule>
## SSL Virtual Host Context
<VirtualHost *:443>
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional and require.
SSLVerifyClient optional
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
SSLCipherSuite SSL_RSA_WITH_RC4_128_MD5,SSL_RSA_WITH_RC4_128_SHA,SSL_RSA_WITH_3DES_EDE_CBC_SHA,SSL_RSA_WITH_DES_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA
# SSL Certificate Revocation List Check
# Valid values are On and Off
SSLCRLCheck Off
#Path to the wallet
SSLWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/default"
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
BrowserMatch ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
SimulateHttps On
</VirtualHost>
</IfModule>
I added the following to the httpd.conf
LoadModule certheaders_module "${ORACLE_HOME}/ohs/modules/mod_certheaders.so"
AddCertHeader HTTPS
AddCertHeader SSL_CLIENT_CERT
AddCertHeader SSL_CLIENT_S_DN
AddCertHeader SSL_CLIENT_S_DN_CN
AddCertHeader SSL_SERVER_CERT
The only errors I see in the logs are:
[ERROR:32] [OHS-9999] [core.c] [host_id: angkor.englink.bah.com] [host_addr: 127.0.0.1] [tid: 1335089472] [user: root] [ecid: 004bXaue_EwFw000jzwkno0006kT00000K] [rid: 0] [VirtualHost: main] File does not exist: /u01/app/oracle/Middleware/WT/Runtime/config/OHS/englink/htdocs/favicon.ico
Other things to mention:
I do have a certificate error but I don't see anything in the logs as to why and to be honest i'm not sure where to look.
And I did not originally configure this server but i'm concerned that the above thinks the host_addr is 127.0.0.1 instead of the actual ip of the server (should I change this?)
Any help is appreciated.
Edited by: 843394 on Mar 10, 2011 6:28 AM

Were you able to resolve this issue? I am currently having the same issue. I thought that it was likely that my ssl.conf didn't have SSLOptions +ExportCertData ... but I still have the issue after modifying ssl.conf.                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Similar Messages

  • ISE Problem: EAP-TLS failed SSL/TLS handshake because of an unknown CA in the client certificates chain

    Hello, I´m stucked with this problem for 3 weeks now.
    I´m not able to configure the EAP-TLS autentication.
    In the "Certificate Store" of the ISE server I have Installed the Root, policy and the Issuing certificates as "trust for client authentication",and in the Local store I have a certificate issuing for the same issuing authority which sign the thw client ones.
    The ISE´s certificate has been issued with the "server Authentication certificate" template.
    The clients have installed the certificates  also the certificate chain.
    When I try to authenticate the wireless clients I allways get the same error: "     Authentication failed : 12514 EAP-TLS failed SSL/TLS handshake because of an unknown CA in the client certificates chain"
    and "OpenSSLErrorMessage=SSL alert
    code=0x230=560 ; source=local ; type=fatal ; message="Unknown CA - error self-signed certificate in chain",OpenSSLErrorStack=  1208556432:error:140890B2:SSL routines:SSL3_GET_CLIENT_CERTIFICATE:no certificate returned:s3_srvr.c:2720"
    I don´t know what else can I do.
    Thank you
    Jorge

    Hi Rik,
    the Below are the certificate details
    ISE Certificate Signed by XX-CA-PROC-06
    User PKI Signed by XX-CA-OTHER-08
    In ISE certificate Store i have the below certificates
    XX-CA-OTHER-08 signed by XX-CA-ROOT-04
    XX-CA-PROC-06 signed by XX-CA-ROOT-04
    XX-CA-ROOT-04 signed by XX-CA-ROOT-04
    ISE certificate signed by XX-CA-PROC-06
    I have enabled - 'Trust for client authentication' on all three certificates
    this is unchecked - 'Enable Validation of Certificate Extensions (accept only valid certificate)'
    when i check the certificates of current user in the Client PC this is how it shows.
    XX-CA-ROOT-04 is listed in Trusted root Certification Authority
    and XX-CA-PROC-06 and XX-CA-OTHER-08  are in Intermediate Certificate Authorities

  • Getting the Client Certificate out of the HttpServletRequest object

    I have an interesting issue with weblogic 5.1 SP6 and getting/obtaining Client
    Certificates.
    The issue is that the Client Certificate is not always in the HttpServletRequest
    object depending on how the weblogic.properties are set. Here is my code to get
    the Certificates.
    // get the cert chain from the request
    Object obj=request.getAttributs("javax.net.ssl.peer_certificates");
    if (obj instanceof weblogic.security.X509[]) {                          
    weblogic.security.X509[] wlogicCert = (weblogic.security.X509[]) obj;
                                            try {
                                            iaik.x509.X509Certificate iaikClientCert =
         new iaik.x509.X509Certificate(wlogicCert[0].getBytes());
         clientSDN = aiaikClientCert.getSubjectDN().getName();
         clientCert = (Certificate)iaikClientCert;
    The only time the certificate is present in the Request Object is when the following
    weblogic.properties are set:
    weblogic.security.enforceClientCert=true
    weblogic.security.clientRootCA=CARoot.pem
    If the properties are set to to this: no Certificate can be received from the
    Request object.
    weblogic.security.enforceClientCert=false
    #weblogic.security.clientRootCA=CARoot.pem
    Is there a way to have Weblogic always receive/get a Client Certificate if one
    is provided by the client, but not have weblogic do any validation of the certificate?
    Any help would be appreciated!
    Gary

    ok i see.
    although it should be able to get the underlying
    outputStream handle since i have initialized
    (associated) it on the previous line.
    ThanksWell, you might be able to get the underlying stream. Look at the API docs. If there's a method there to do it, then you can. If not, then you can't.
    If you can do it, then you have to look at the API docs for FileOutputStream and see if it lets you get the associated File or path. If such a method exists, then you can get it. If not, then you can't.
    Even if both methods exist and you can utimately get the file, do you understand why this is not the same as "getting the file associated with a PrintStream"?

  • Can a pl sql cartridge get the client certificate through ssl in OAS

    I am In a web publishing system project, I use SSL and client certificate to verify the user, the environment is OAS4.0.6 and Oracle 8i, and I use PL SQL cartridge to proceed the http request , Now the problem is how can I get the client certificate infomation in my pl sql scripts, I do not know where should i post this problem, So I post it here, If you have any experience in using SSL of OAS, pls help me!
    tsailiang
    [email protected]
    thank you very much!

    Sorry wrong forum.....
    This forum is for the Internet File Server (ifs) not the oracle application server (oas), sometimes known as iAS or Oracle9i Applicaiton Server.
    null

  • 2-way SSL and access control using the client certificate

    Hi,
    I'd like to configure WLS 8.1 so that the server will use the client identity extracted from the client certificate to determine whether permissions should be granted. I am having some problems.
    Details: The client can be either a Web service or a web application. The steps for authentication and authorization should be:
    - The client sends a request to an Apache server (DMZ) which will then be forwarded to WLS.
    - The client's identity, common name from the X.509 certificate, is mapped to the "username" (using WLS default identity assertion provider).
    - Validate whether the client should be trusted (via the list in the trusted credentials)
    - Check whether the resource should be granted based on the "username".
    The on-line manual says
    "If the Web browser or Java client requests a WebLogic Server resource protected by a security policy, WebLogic Server requires that the Web browser or Java client have an identity."
    "The user corresponding to the Subject's Distinguished Name (SubjectDN) attribute in the client's digital certificate must be defined in the server's security realm; otherwise the client will not be allowed to access a protected WebLogic resource. For information on configuring users on the server, see Creating Users in Managing WebLogic Security."
    So the questions I have are:
    - If the client identity is certificate based, why should we configure users with the "user name" and "password"? How can we get around it?
    - Once I defined the security condition for my app to use "user name of the caller," a default username and password prompt automatically popped up.
    Apparently, the SSL mutual authentication configuration and the default authentication provider to use the X.509 type didn't take any effect.
    - Without defining the security policy for the application, the debugging messages show that
    getRoles(): input arguments: subject:0
    Entitlement - <Role:Annonymous with expr:Grp(everyone)>
    Any suggestions? Thanks.

    Hi,
    I am trying to use 2 way ssl using webservices client , here is my code :
    AxisProperties.setProperty("org.apache.axis.components.net.SecureSocketFactory","org.apache.axis.components.net.SunFakeTrustSocketFactory");
    SSLAdapterFactory factory = SSLAdapterFactory.getDefaultFactory();
    WLSSLAdapter adapter = (WLSSLAdapter) factory.getSSLAdapter();
    // clientCredentialFile stores in PEM format the public key and
    // all the CAs associated with it + then the private key. All this in // a concatenated manner
    FileInputStream clientCredentialFile = new FileInputStream ("C:\\sslcert\\client-pub3.pem");
    // private key password
    String pwd = "password";
    adapter.loadLocalIdentity(clientCredentialFile, pwd.toCharArray());
    adapter.setVerbose(true);
    adapter.setTrustedCertificatesFile("C:\\certificate\\server\\server.jks");
    adapter.setStrictCheckingDefault(false);
    factory.setDefaultAdapter(adapter);
    factory.setUseDefaultAdapter(true);
    boolean idAvailability = false;
    UNSLocator locator = new UNSLocator();
    URL portAddress = new URL("https://localhost:7002/smuSSWeb/UNSResponse.xml");
    UNSPort unsprt = locator.getUNSPort(portAddress);
    idAvailability = unsprt.isIDAvailable("Yulin125", "C");
    System.out.println("Got from method :"+idAvailability);
    After runing this code i am getting the following exception :
    AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
    faultSubcode:
    faultString: java.net.SocketException: Software caused connection abort: socket write error
    faultActor:
    faultNode:
    faultDetail:
    I am using .pem (clientsigned,clientinter,clientroot, root-key) files for client authentication and i am using server.jks as a keystore for my server authentication.Once i run this code , i am able to present the server certificate chain to the client but i am not able to present the client certificate chain to server.
    I am stuck with for quite sometime.
    Some insight needed from the guru's

  • While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

    While updating my ipad to ios7, I could not pass the terms and conditions screen where I had to agree or disagree. It just didn't move pass that screen. I can't do anything to go forward or back. It's just stuck there.

    Try to reset the device:
    Device Reset (won't affect settings/data/music/apps/etc)
    1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
    2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
    3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

  • How to resolve a Lenovo PC that will not pass the Lenovo Splash screen with no access to Windows

    Here is my problem and here is the solution!!!
    My B540 Ideacentre would not pass the Lenovo splash screen. The only operational keys I had was F1 (BIOS) and F12 (BIOS options). F2 went to a light blue screen so no chance of even a one key recovery. Warrenty had expired four and a half months ago. I contacted Lenovo and after the guy told me to try F2 twice he said it was a HDD or other hardware failure and would cost around £200 maybe and also would take about two weeks. 
    AT THIS POINT YOU SHOULD NOT BE ANGRY FRUSTRATED OR PANIC. REMAIN CALM AND STOP AND THINK WHAT ACTUALLY WAS HAPPENING WHEN YOU LAST USED YOUR PC.
    For me I remembered Windows had auto downloaded 8.1 and was asking me to install. Also my keyboard had lost shift W T Y keys. This told me that it was not a hardware issue but a software issue and perhaps from this update. My HDD was not clicking or beeping and this PC has a 2TB Seagate Barracuda which has a good reputation. Luckly for me I also have a Seagate external expansion 2TB and a 500MB expansion which was the HDD from my old HP Touchsmart which I converted into an external hard drive by buying a HDD enclosure with cooling fan and all leads from eBay for £25 and this is where the solution is.
    If you can create an expansion drive so easily and access the HDD then why cant I do it with the HDD from my Ideacentre and of course you can. So first unplug your PC or laptop. Next remove the cover and unclip the HDD (which is easy with the B540. See user instructions). Next I removed my HP HDD from the enclosure and fitted my Ideacentre HDD in its place. Next you need a laptop or another PC. Switch it on and then connect your HDD to the laptop or PC via highspeed USB cable. My laptop is running Windows 7 Ultimate and of course has all the repair tools required. When the software has loaded you may get a box that will have two options. The first will ask you if you want to repair your files and the second to scan for bad sectors and to attempt repair recovery of sectors. Tick both boxes and click start. This is a long slow process but worth the wait. Nine hours later my HDD was ready. I connected my Seagate expansion to my laptop and moved all new files that I had not backed up. So at this point you should create a folder and move all your photos music videos documents etc to it. This can take upto three hours if you have never backed up before and are moving everything. Once completed I shut everything down and replaced the HDD into my Ideacentre. Make sure do not have any external devices connected such as expansions external drives headphones etc. Connect the power and switch on. The Ideacentre booted up and there was a pause at the splash screen then it went to a black screen and then by the miracle of logical thinking I was at my lock screen. I was never so glad to see the map of my home land "Ukraine". After jumping up and down with joy I then went in and all was as normal but to be sure I went into safemode and started a complete restore. This is the option where you completely format your HDD and restore as new. It takes a long time but it is the best option because you do not want this to happen again. When this has completed and you are in Windows do not wait a moment longer by playing with your photos or creating your desktop picture. Go to create a recovery drive (use a 32GB stick) and after that also make a copy to disc. Next go to command prompt (cmd) Admin and change a setting by typing bcdedit /set {default} bootmenupolicy legacy. This will now enable your F8 key to boot straight into safemode just incase you need to in the future. It will slow boot time a little but better to be able to get in to Windows than not at all for the sake of a few seconds. 
    Well I hope this helps someone out there and I know you may think its a lot to do but it is not. Ask a friend to borrow a laptop or PC and perhaps a HDD encloser. The rest is just time but when you see your lock screen you will not care trust me. 
    Cлава Україні!!! Героям слава!!!

    I thought this was the method I used before but I followed through it and it was a horrific fail.  "Operating system not found".  Can anyone help?
    http://superuser.com/questions/421402/how-to-create-a-bootable-usb-windows-os-us ing-mac-os-x
    Steps To Achieve Victory
    Download the ISO you want to use
    Open Terminal (in /Applications/Utilities)
    Convert .iso to .img using hdiutil:
    hdiutil convert -format UDRW -o /path/to/target.img /path/to/source.iso
    Rename if OS X gave it a .dmg ending:
    mv /path/to/target.img.dmg path/to/target.img
    Type diskutil to get a list of currently connected devices
    Insert USB drive you want to use
    Run diskutil again to see what your USB stick gets assigned eg - /dev/disk3
    Run diskutil unmountDisk /dev/diskN (where N is the number assigned to your USB stick, in previous example it would be 3)
    Run sudo dd if=/path/to/target.img of=/dev/diskN bs=1m (if you get an error, replace bs=1m with bs=1M
    Run diskutil eject /dev/diskN and remove your USB stick
    The USB stick will now be ready to use
    Also similarly described here: http://www.tomshardware.co.uk/answers/id-1733410/creating-microsoft-bootable-usb -mountain-lion.html#.

  • ICal Server reacheable by the server but not by the clients

    Dear all,
    We've got an iCal Server running on Mac OS X Server 10.5.4. Suddenly (due to a power failure), the iCal Server stopped working. I checked the file /System/Library/LaunchDaemons/org.calendarserver.calendarserver.plist and Disabled was set to True, so I set it to False and I rebooted. Now, the iCal Server launches correctly and will work on the server itself, but not on the clients.
    The clients can't even reach http://iguane.local:8008/ (they can still reach the Apache web server).
    Any idea of how the access on the local network can be restored? I am not sure where to look and what's wrong.

    If you can't reach the server via Safari then there is some problem with the network setup on your server machine or with some device between the server and client.
    Can you stop then restart the calendar server and post the text from the error.log that appears when you restart? That should indicate which network interfaces are being bound to by the server - we should double-check that.

  • Mobile Sync not update the client or remote store  after first sync

    Subject: OracleLite 9i does not update the client or remote store during synchronization with a Windows CE device
    After the first synchronization, neither the client or remote stores are updated on future synchronization when the publication is created with the fast refresh option. If the publication is created with the complete refresh option, the server will update the client, but the client cannot update the server after the first synchronization. That is once the database (.odb) file is downloaded from the server on the first connect, no updates to either the client, or server are performed for a publication created with the fast refresh option, and only the client store is updated when the publication is created with the complete refresh option. These result are obtained whether I use MSync via Microsoft Active Sync, or I use the Embedded VC++ program I wrote to initiate the synchronization from the Windows CE device.
    I am 99% sure the JAVA code that I am programmatically creating the publications with, and the Embedded VC++ code for initiating the synchronization from the Windows CE device are correct. Both programs adhere exactly to the example code provided either in the documentation, or in the sample code shipped with OracleLite 9i Release 5.0.1. My conclusion is that there is a problem with Oracles replication programs either on the Windows CE, or Server side, or both. This conclusion on my part is strongly supported by the fact that MSync operating with Microsoft Active Sync behaves exactly the same as my code that initiates the replication from the Windows CE device. Also, by looking through the discussion forum, I gather that others are experiencing similar, if not identical, replication problems.
    To support my contention that it is a Oracle problem, I have prepared a simplified version of the Embedded VC++ code to initiate the synchronization for the CE device, and the JAVA code for creating the publication. This code duplicates the problem and is easy to follow. You may download the zip file containing code via the link https://Yggdrasill.cfr.msstate.edu:4443/SyncProblem.htm or the link http://Yggdrasill.cfr.msstate.edu:7778/SyncProblem.htm. This zip contains the Embedded VC++ project files, that will compile and run correctly on a PocketPC with an Arm processor, or the PocketPC x86 emulator when you have the required include files, and libraries in the path. It also includes the JAVA code I used to create the publication. If you extend the VC++ code to run on additional platforms be sure to add the compile flag (directive) /D SQL_NOUNICODEMAP , and the library files olod2040.lib, and ocapi.lib in the library box from Project settings. On my system the paths to the Arm, and x86 libraries are C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\Arm\LIB, and C:\ORALITE501\MOBILE\SDK\WINCE\POCKET_PC\X86EM\LIB, respectively
    I am using a NT 4.0 SP6a server with Database 9i Release 2 Enterprise edition, and OracleLite 9i Mobile Server Release 5.0.1. The Windows CE test device is an iPac running Pocket PC, connected to a system running Windows 2000 Professional SP2, and Microsoft Active Sync 3.1.
    Please review this problem documentation, and tell me what I am doing wrong, or point me to a location where I can get a patch to fix the problem.
    Thanks,     
    Thomas G.Matney
    [email protected]
    (662)325-2791

    Hi,
    I'm also facing a similar problem. I'm using Mobile server as stand alone config with Oracle 8i as server database. After the first download, the data updated at the server is not getting downloaded to client(PDA).
    How did u overcome this problem? Is there any work around?
    I want to do synch using both serial and dial up.
    Thanks in advance,
    Sri

  • How to create a Credit Note to the client for purchasing of an Asset last y

    Hi,
    I have an issue in Asset Accounting as it showed bellow:
    Assets depreciation start date is 1st October 2007.
    We have run the depreciation up to November 2007.
    Than we sold the asset in December.
    However, after the end closed year 2007, client returned the asset in 1 st January 2008.
    So i need to create a Credit Note to the client for purchasing of an Asset last year, but we don't know how to create it?
    We thinks that correct movement should be debit in extraordinary cost / profits account, debit in asset account, credit in accumulated depreciation account and credit in client account.
    Plz help. I will assign full points for any useful answer.
    Thanks
    Edited by: Ricardo Pedro Rodrigues Ferrão on Dec 20, 2007 10:09 AM

    How did you sell the asset?
    You can just reverse the sale transaction by going to transaction AB08.
    Hopefull this may work for you.
    Regards,

  • FX 5200 TDR128 driver not pass the windows XP logo testing

    Hi there,
    I've just bought an FX 5200 TDR128 VGA Cards, the problem is I cant install the driver because the driver is not pass the windows XP logo test (the error massage box says yhat the device driver is not designed with windows XP logo. So what can I do now? My VGA wont work properly if I do not install the driver which designed for microsoft windows XP logo.
    Best regards

    A MS signed (WHQL - Windows Hardware Quality Labs) driver is not a requirement - MS may make a big deal about it, but do you really think that MS has the time to test each and every driver (and their many revisions) that are made by all the hardware manufacturers in existence??!
    Fact is, by the time MS finally 'certifies' a driver, odds are the manufacturer has built a newer and better one (especially in the case of graphic card drivers).  Odds are, MS only really tests certain driver revisions as submitted to them by the author.  (and, if you happen to install older hardware, the last driver available for that hardware may very well not be signed - what would you do then?!)
    That said, you can ignore the warning message that Windows gives you about a driver not being signed.  In fact, you can disable the driver check altogether in - Control Panel -> System -> Hardware tab in Device Manager section click the 'Driver Signing' button and set to 'ignore.'
    Finally, after all that, the current nVidia driver (v.56.64) is WHQL signed - browse to it here or go directly (Win XP/2K) here.

  • [TECHNOTE ANNOUNCE]  Error installing Flash Player "The download did not pass the integrity check (16236.304.443)

    All,
    I've published a new technote for folks who are having trouble with the Adobe Download Manager and Flash Player.
    Error installing Flash Player "The download did not pass the integrity check (16236.304.443)
    http://kb2.adobe.com/cps/512/cpsid_51258.html
    Essentially this technote links to the Windows troubleshooting technote here:
    http://www.adobe.com/go/tn_19166
    However, before today the Windows troubleshooting technote only had an EXE install for the ActiveX version of Flash Player 10.  I have now added a link to download the EXE version of the Flash Player Plugin installer as well.
    Please point other users with integrity check errors to the first technote.

    Thank you for the update & Tech Note Announcement. I do have a couple of questions, if you could please respond.
    After uninstalling and ready to download; reading from the link you provided on 9/4/09, Should we follow the normal download instructions
    per #2. "Flash  Player download Center" and if a successful installation is not accomplished, THEN, go to "download and unzip install_Flash_Player_10_Plugin (all other windows browsers) ? Or should the latter step be done in lieu of #2 mentioned. I am assuming the download from F.P. D.L. Center would be done first and then troubleshoot by running the EXE. version of the F.P. Plugin installer.
    Experience has taught me not to assume much, and if you don't know, ask!
    Thanks for your hard work, but you have to admit, for the technically deprived, it is frustrating and confusing.

  • Adobe Photoshop CS5 did not pass the security scan on my windows machine.

    All products are up-to-date but the photoshop did not pass the test. Does Adobe still support the CS5 products?

    No, Adobe no longer officially supports any of the CS5 products.
    However, we are not aware of any reports of any anti-virus / anti-malware software rejecting any Adobe products.
    Exactly which such software is doing that? You may have very outdated or crufty virus / malware definitions. Try to get updates for them.
              - Dov

  • Windows Cluster Management Library did not pass the security verification

    so, nothing to add
    Windows Cluster Management Library did not pass the security verification. 
    The management pack cannot be downloaded and the temporary file has been deleted.
    Could not load management pack [ID=Microsoft.Windows.Cluster.Management.Library, Keytoken=31bf3856ad364e35, Version=7.1.10100.0].
    Current versions:
    SCOM 2012R2  update rollup 4
    Windows Cluster Library 7.0.8433.0
    Windows Cluster Management Library 6.0.7063.0
    Windows Cluster Management Monitoring 6.0.7063.0
    any solution to fix?
    none

    Igor,
    take it from there:
    http://www.microsoft.com/en-us/download/details.aspx?id=2268
    I assume you tried to get (download/import) it directly through the console, right? That's not recommended since you most of the times don't get the guides (download) or can review the MP (import).
    A better source for downloading (and to subscribe for mail notifications) would be:
    http://social.technet.microsoft.com/wiki/contents/articles/16174.microsoft-management-packs.aspx
    Cheers,
    Patrick
    Please remember to click “Mark as Answer” on the post that helped you.
    Patrick Seidl (System Center and Private Cloud)
    Website: http://www.syliance.com
    Blog: http://www.systemcenterrocks.com

  • Has anyone had this problem with VPN iPad vpn connection could not validate the server certificate

    Has anyone had this problem with IPad 3 after upgrade to IOS 7,
    trying to to connect VPN , but I get this messag, "could not validate the server certificate".
    I am trying to connect to Oracle VPN.

    Has anyone found a solution for this yet? I am still getting the could not validate server certificate error. I have tried importing the entire certificate chain as well as importing each individual cert in the chain. My certificate works perfectly with the cisco vpn on my pc.
    This is my first experience owning an apple product, and I am very disappointed with the customer support that I have received. I tried calling the help line and no one would even attempt to answer my question. I was then told that the Mac "geniuses" wouldn't know either and that I may be able to find an answer on the message boards. So I am reaching out to the community...Has anyone been able to figure out how to resolve this issue or even the specific cause? Any help is appreciated.

Maybe you are looking for

  • How to switch off breadcrumb-navigation in EP 6.0 ?

    Hi All, I've got the request to switch off the s.c. breadcrumb-Navigation. Is there any possibility to remove this ? In EP5 there was possible to let them disapear by changing the font color, this seems not to work in EP6 as some parts of the links c

  • Mac mini and display

    any one can tell what is the best or posible display for mac mini 1.25mhz ? thanks

  • Getting text ID and Text object  associated with item texts in PO...

    Hi, To print standard text on smartform for a given item in purchase order, I need to find the text ID and object associated with it. There are various texts like item text, Info record PO text, Material PO Text, Delievry Text, etc... Now when I go t

  • BIPublisher Template Builder Error: System Error &H80040111 (-21472211231)

    Hi, I have installed BIPublisher Desktop 10.1.3.4.2 on my Windows XP SP3 machine and i can see Template Builder Add-In added to MS Word. But, When ever i try to access Template builder menu, word is displaying the following error and i can't do anyth

  • Configure Open Directory using CLI

    We have a Leopard Server in Advanced Mode. If you have a fresh install of Leopard Server with nothing configured, is there a way to configure Open Directory to be an Open Directory Master completely using CLI utilities? Wasn't able to find anything i