OID doesn't startup

Hi All,
When treid to restart OID using
./opmnctl startproc process-type=OID
giving error
Start process
[gsdsiConnect] ORA-28000, ORA-28000: the account is locked
Could not connect to the Database.
Pls suggest what needs to be done.
Thanks and Regards,
Azze.

Cause
When ODS account of infrastructure Database is locked, all activities of OID will hang up and
generate an error message of
ORA-28000: the account is locked encountered
Solution
To implement the solution, please execute the following steps:
1. Log in to the system where infrastructure DB is installed.
2. Set proper values of ORACLE_HOME and ORACLE_SID
3. Use SQLPlus to connect to the database as dba
sqlplus / as sysdba
4. unlock ODS account with command
ALTER USER ODS ACCOUNT UNLOCK;
5. the try the oidpasswd command again.

Similar Messages

My Iphone goes dead; seems charging on wall; but when i tried to connect it by usb, it doesn't startup

Hi;
My iphone 4 goes dead; from yesterday it was working normaly but suddenlly it shut off; i get backup to restore the old version, but unfortunalty when i unpluged from computer it shut down, and refused to startup via usb again, i have tried to push on home button an power together for about 1 minute, but it didn't work,
it works on wall but says activition required, connect to itunes, when i unpluged from wall, iphone shutdown and doesn't startup again with usb
when i connected it on walls, it reset everything dates, clock and battery back to zero, even when i unpluged it with 100% charging battery, back to zero
i hope anyone can help; it is a bussiness phone to and i need it
thanks in advance for any help

Hi there starbaeza,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W.

Oracle 10g DB doesn't startup artomaticlly

Oracle 10g (10.2.0.1) DB doesn't startup artomaticlly with the server.
Navigate to the Windows HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\oracle_home_name , I find the
ORA_SID_AUTOSTART already set to TRUE. In the Windows Service (local) tab , I find the OracleServiceSID
already appear there and the Startup_type already set to AUTOMATIC.
What is the reasons?
Another issue: I open the Windows Task Manager, the ORACLE.EXE process does not appear in the Task Manager.
In fact, the database is running.
Edited by: qkc on May 16, 2011 12:37 PM

It's a new created database, I don't know the auto-start condition after creating.
2 days ago, I imported a schema and created the following error messages:
The following message is from alertSID.log file:
Errors in file c:\oracle\product\10.2.0\admin\millan\udump\millan_ora_828.trc:The following message is from the trace file:
TKPROF: Release 10.2.0.1.0 - Production on Mon May 16 16:09:33 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Trace file: c:\oracle\product\10.2.0\admin\millan\udump\millan_ora_828.trc
Sort options: default
count    = number of times OCI procedure was executed
cpu      = cpu time in seconds executing
elapsed = elapsed time in seconds executing
disk     = number of physical reads of buffers from disk
query    = number of buffers gotten for consistent read
current = number of buffers gotten in current mode (usually for update)
rows     = number of rows processed by the fetch or execute call
Trace file: c:\oracle\product\10.2.0\admin\millan\udump\millan_ora_828.trc
Trace file compatibility: 10.01.00
Sort options: default
       1 session in tracefile.
       0 user SQL statements in trace file.
       0 internal SQL statements in trace file.
       0 SQL statements in trace file.
       0 unique SQL statements in trace file.
     162 lines in trace file.
       0 elapsed seconds in trace file.Edited by: qkc on May 16, 2011 1:14 PM
Edited by: qkc on May 16, 2011 1:15 PM
Edited by: qkc on May 16, 2011 1:16 PM

Mac Pro, Lion: front light flashing, fans blowing, and doesn't startup...

This has never happened before: my Mac Pro's (Lion) front light flashing, fans blowing, and doesn't startup...
Any workaround? Help, please...

If there is no response to keyboard or powerbutton presses; hold power button until it shuts off. Unplug and wait 5 minutes and then plug back in and try to start again.
Post back with results.

After upgrading to 10.0.9, FCP X doesn't startup anymore

The headline says it all : After upgrading to 10.0.9, FCP X doesn't startup anymore.
I trashed all preferences and I moved all projects and events to a backup folder. Still - the new version just will not launch.
I don't even get to see the splash screen. I'm back working with 10.0.8.
Any ideas???

Thanks for your feedback.
The first time I updated without compressing and moving the FCP X app.zip to a new folder. So no it was not hidden. The other times after that I zipped 10.0.8 and put it in a subfolder.
I had updated FCP X several times before without any issues.

Illustrator CS4 doesn't startup any more

I have worked successful with CS4 but last week Illustrator won't start up any more.
When I start Illustrator there is nothing happens because it wont start up and yes, after that, my pc is hanging up (you must start up with force.
The second program from CS4 Photoshop is working good.
I have re-install CS4 but same problem (Illustrator don't startup and after that pc does nothing, photoshop is working good.
Tried CS3 to watch if Illustrator is working but same problem.
I have delete from registry, I have try WinCS3clean, cs4clean, etc. but it won't; Illustrator doesn't start up any more.
What can it be?

My first effort may have also helped my issue, that is to move out or turn off all my fonts except a few necessary ones. If Illustrator opens then you start adding them back to find the locked or corrupt font file. One easy way to find corrupt fonts is if the file size is 0 kilobytes. I also downloaded fontagent and imported all my fonts (chose the folder) into it and during that process it verifies if the fonts are corrupt, note the ones that are corrupt from that screen and delete them manually. You don't even have to setup the fonts in FontAgent to do this, but a 30 day free trial made it worth the effort.
Jane, you may have a different issue then fonts if it doesn't hang upon the loading fonts... section of welcome screen.

Safari doesn't startup; icon bounces once

Hi, i have 4 accounts on the computer and Safari on my account won't startup. The icon just bounces once and then nothing. Tried re-downloading but that didn't solve it.

Hi and welcome....
Possibly third party add-ons causing the problem.
Follow the help here for troubleshooting; Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Carolyn

After installing Yosemite beta on external drive, Mavericks doesn't startup from the internal drive

Hi,
After I installed OS X Yosemite Beta on my external hard drive, my Macbook Pro no longer recognises and boots from the Mavericks partition on my internal drive. instead, it starts up the Yosemite installer even when the external drive is not connected.
And when holding the option key during startup, it shows 2 partitions: "OS X Installer" (that I've not created) and "Recovery-10.9.5". However from the system preferences in Yosemite, the partition is shown as a startup disk. and also i can see the Macintosh HD partition and its contents in Yosemite.
Any idea how to make it boot normally when turning on the macbook? any help appreciated!
Thanks!

Try this:
Go to "System preferences"
Click on " Boot-up Disk" (4th row)
Select the disk you want to boot
Restart the computer

Unknown error during 10.4.6 update and now machine doesn't startup

Hi all
As with many people, the update broke my machine.
The update failed with an unknown error. Then no apps would start, so I rebooted, and now the PB won't start, just goes to the Apple with the spinning thingy beneath, and sits there forever.
And suggestions on how to fix this, shy of archive and install?
I can boot off a 10.3 firewire drive and look at the drive. I tried running the standalone update from this to update the 10.4.5 system, but the update won't run because I'm not running the correct system. Thanks, Apple.
So, ideas?

First off, verify the directory is okay with Disk Utility. From there, if you're confident in Terminal, you may be able to recover. I've done it when my 10.4.4 update failed due to directory corruption.
[1] Copy the 10.4.6 Combo Updater onto the 10.4 drive, top level.
[2] Boot into Single User mode off the 10.4 drive.
[3] IF you get into single user mode successfully, proceed with fsck'ing and mounting the volume.
[4] Use hdiutil to mount the Combo Updater (ie hdiutil attach /MacOSXUpdCombo10.4.6PPC.dmg).
[5] Run installer to rerun the combo updater (ie, installer --pkg /Volumes/Mac\ OS\ X\ 10.4.6\ Combined\ Update/MacOSXUpdCombo10.4.6PPC.pkg --target /).
[6] Reboot and see if it worked!
Basically, the idea here is that the Combo updater can overwrite clean copies of all the apps that 10.4.6 tried to update, but since the GUI is hosed you need to come at it from the command line tools of single user mode. So if, it works, you're up and running again. If it doesn't, then you're probably going to have to do an archive and install to get operational again.
Best o' luck!
Various... B&W G3 thru XServe G5

Mac Mini doesn't startup after failure firmware update..

Hello.
I have a mac mini.
Downloaded firmware update and Mac OS X update through MAC OS X Software Update.
After that my Mini Mac ask me to restart.
And now my display shows "No signal" message and no startup sound. Indicator lights up, can hear Hard Drive sound and DVD disk sound, optical mouse lights up... and nothing else.
I tried to reset PMU... nothing again (

Hey Guys today i updated my macmini from 10.5 to 10.5.2 i downloaded the file 343MB on http://www.apple.com/support/downloads/macosx1052comboupdate.html since i have a slow connection i took me 5 hours to download the file after installed and and saw the success intallation with a green checkmark then restart and it presented me a blank white screen as i was reading the discussion i read that just leave it as the OS is doing it's thing but there is no indication whatsoever just a blank screen. then i saw my SD card reader blinking i remove it thinking that its the cost why there is now indicator that the HD is still reading so ive waited for 30mins without touching a thing and finally i heard the CHIME OF RELIEF the apple logo flashes and I have installed my OS 10.5.2 successfully

MacBook fell, doesn't startup from DVD; hard drive remplacement necessary?

Hi, my son's MacBook fell and now it doesnt start up anymore, there's only a grey screen and a question mark.
Tried to startup from the 10.6 DVD, with C-key held down > no reaction, DVD is spit out.
Tried to startup from the 10.5 DVD (was originally bought with 10.5), and it reacts to that in that it asks for which language to use, but at the Select A Destination-window, the window stays blank: it can't find the hard drive it seems.
My brother in law says it will likely need a new hard drive. If so, what type to use and can I install it myself (once did so with a 10.3 iBook)?
From this computer I don't know the specifics (how many GB or RPM). Somebody else bought it.
thanks in advance!

>something tiny fell out as well. It went so fast, I'm not sure what it was, but I did see a tiny flat metal ring (4 mm or so)<
It's possible something associated w/ the hard drive/connector got broken when it fell. So search carefully for any other part that could have come out when you pulled the HD out, even if it's a tiny piece of broken plastic. Then could you put up a picture of that ring and what ever else you find? I'm pretty familiar w/ most parts in a MacBook and that part/s might be a clue to what got broken when it fell.
Also check the serial number and run it at:
http://www.chipmunk.nl/klantenservice/applemodel.html
The serial number is located on a sticker in the bottom of the battery well.
>(once did so with a 10.3 iBook)< Holy buckets! That's impressive and way, way harder that what's involved in replacing the HD in a MacBook!
So based on that impressive statement I'm going to say:
Depending on what kind of external you have (Is it roughly the same general size as the MacBook HD? I.E. laptop HD size.). You could pull the HD out of the external and put the MacBooks internal HD in there ( Since they're probably both SATA) and see if it spins up when you have the external plugged in an start up the computer. If they're not both SATA you'll have to buy a USB dongle. I've gotten them for as cheap as $14.
If it spins up select it and try to boot from it. If it boots there then something broke as above.
If no spinup then HD probably toast. I've been able to get these running by tapping on one that wouldn't spin but if you try that be ready to clone it immediately. If you get it to spin up that way try not to move/disturb it, see if it mounts. If so clone it immediately. So you'll need to be ready w/ Data Rescue or Super Duper and have enough space available to clone it to something.

JDev 9.0.2 doesn't startup anymore?

I have Jdeveloper 9.0.2 installed with Oracle 9i Developer Suite (9.0.2) on a Pentium III 600Mhz PC. The operating system is Win 2000.
To solve this startup problem of Jdeveloper, I uninstalled Oracle 9i Developer Suite (9.0.2) and reinstalled it completely. After reinstallation, Jdeveloper starts up again. The next day, and nothing else has been installed on the PC. I have the same problem back.
If I start Jdeveloper I have for a short time the hourglass (5 sec) Then nothing happens. The CPU usage goes from low (1%) to (100%), consumed by system and stays high forever.
What can be the problem? Has any one had this problem?

I have Jdeveloper 9.0.2 installed with Oracle 9i Developer Suite (9.0.2) on a Pentium III 600Mhz PC. The operating system is Win 2000.
To solve this startup problem of Jdeveloper, I uninstalled Oracle 9i Developer Suite (9.0.2) and reinstalled it completely. After reinstallation, Jdeveloper starts up again. The next day, and nothing else has been installed on the PC. I have the same problem back.
If I start Jdeveloper I have for a short time the hourglass (5 sec) Then nothing happens. The CPU usage goes from low (1%) to (100%), consumed by system and stays high forever.
What can be the problem? Has any one had this problem? Haven't seen this one. Did you switch the JDK to 1.4? There are issues with 9.0.2 under JDK 1.4.
Rob

IMac Freezes and then doesn't startup

I have a 600Mhz G3 iMac, and from some time ago, it is giving some problems.
At first, it freezes and when restarting, after the normal chime a blinking "?" folder appeared. I'm a old Mac user (15 years)...and i know that is a "No System to startup" problem...probably HD problem. But the iMac, after waiting some minutes, restarts and works fine.
Now, the problem is bigger. It freezes from time to time, and when restarting there is no normal starting sound, no Apple icon, no blinking folder...just a gray screen....and from time to time, 2 or 3 little and short beeps. It stays like that. After waiting some minutes (or even a day)..it restarts normal, as always.
Any idea what it can be? My first idea was to change the HD...but, if it is the HD, why after waiting some time (cooling??) it starts OK?
Even more, if the HD is the problem...it should sound and appear the ? folder. The starting chime should sound always, even without a HD.
So...mother board, graphic card, HD? one, 2 of 3, all of them...?

I would start the trouble-shooting by installing a new battery, unless that is, you have a fairly new (< 2 years) one.

Itunes doesn't startup with iPod

Usually when I connect my Touch (2 gen) to a USB port on the iMac, iTunes fires up if not already running. Recently this has failed to happen. iTunes will recognize the Touch if it is already running, but otherwise nothing happens if it is not. This behavior started about two weeks ago. I reinstalled iTunes after deleting some files and the startup worked for about a week, then no more. What is going wrong here?

I can't remember which version of iTunes that it started doing what you have described. If I have Quit iTunes and I plug in my touch, it will start. If iTunes is merely minimized, plugging in my touch will not maximize the program.

Imac 233 - beeps and doesn't startup

Hey,
i'm a new poster on this forum, looking for some help.
My tangerine imac 233 is behaving strangely: when switching it on it beeps 4 times and doesn't give any additional sign of being alive.
i can hear both the fan and the hd going, but there is no sign at all that something is happening.
The screen is not giving any sign of life and there is no response from the keyboard (ie caps lock doesn't switch on and the power button doesn't allow to switch off the imac, though it allows to turn the power on).
I've tried to reset the NVRAM, but i couldn't see any result, as the imac doesn't even get to the Chimes sound.
I'd love to keep using this imac, is there anything i can do to keep it alive?
many thanks
benedetto
iBook G4 - 1,25Ghz Mac OS X (10.3.9)

Ciao e benvenuto alle discussioni di Apple,
4 Beeps is the Power On Self Test telling you something is wrong. I think you need to take this in to a professional.
You can recover the data by installing the hard disk in an external enclosure and transferring it to the iBook.
mrtotes

OID doesn't startup

Similar Messages

Maybe you are looking for