OIM 9.1 using MS SQL 2005

Will OIM 9.1 work with MS SQL 2005?

No but 9.1.1 will support MS SQL 2005 according to information from Oracle.
I would strongly recommend not using MS SQL as there is only a small number of customers that are using MS SQL and these customer has had lots and lots of issues over the years.
Perhaps Fred could comment further on this :)
Best regards
/M

Similar Messages

CF8 and connection pooling using MS SQL 2005 JDBC Driver

After upgrading one of our production servers to CF8 we're
getting errors under load while connecting to MS SQL 2000 data
bases using the MS SQL 2005 JDBC 1.1 driver instead of the driver
cf8 ships with. The following error is recorded in the logs:
Error Executing Database Query. The TCP/IP connection to the
host has failed. java.net.BindException: Address already in use:
connect
Confirmed by the database statistics, Coldfusion is no longer
pooling the database connections. After changing the data source to
use the build in driver everything works fine. We've been using
this driver and CF7 for some time without this error.
Is this a compatibility issue between the driver and Java 6?
Or is there a conflict between this driver and the build in driver?
Has anyone seen similar issues? We’d like to use this driver
rather then the build in one.
Thanks,
Remy Becher

thanks for the answer...I have been waiting for one..I do agree that connection ppooling is same ..but I would appreciate it if someone could point me to some example implemenations using MS JDBC type 4 driver..
Thanks again..
PS: I did search the forum before posting this..

MS SQL 2005 remote connection using sqljdbc

Hi,
I have production line computer with software using java code and firebird database, i also have sqljdbc.jar also in the library.
my software is trying to connect to mssql2005 database in a remote computer and got this error message:
java.lang.classnotfoundexception: com.microsoft.sqlserver.jdbc.SQLServerDriver.
I have no problem when connecting to my local mssql2005 database though. but have problems when trying to make remote connection.
May i know what could seem to be the cause of the problem, is there anything missing ? do i need to instal anything else on the production line computer? currently it does not have mssql2005 instal on the production computer do i need to instal it ? please help. thanks

Btreksun wrote:
Hi,
Im using MS SQL 2005 Express edition, I dont find any sqljdbc.jar driver inside the installation,
I dont see any other driver or driver folder in the installation path.
Inside my instalation path C:\Program Files\Microsoft SQL Server: only shows these folders
MSSQL$MSSQL2000
MSSQL.1
80
90
100
"Class path" applies to java. None of the above is java.
I dont know what to set my classpath with?You are running your java in "something". That "something" is an application. That "something" does not have the correct class path. You didn't tell us what it is so we can't help you with it.
I even download sqljdbc.jar and put it inside C:\Program Files\Microsoft SQL Server and set the classpath but doesnt work ?I suggest you google for class path, read several articles about it and try some of the stuff that they talk about.

SQL Injection with CF7 and MS SQL 2005

I looked through a bunch of SQL injection posts and couldn't
find a definitive answer to this...
Let me introduce this by saying that I know I should be using
CFQUERYPARAM with EVERY CF variable in a CFQUERY tag. No excuses.
But for a necessary quick fix, if I only use it for numeric
DB fields, is SQL injection still possible (using MS SQL 2005)?
I've yet to successfully perform SQL injection while manipulating a
variable surrounded by single quotes in the query.
Scenario 1) select * from users where user_id=#form.user_id#
...is a gimme to hack, but
Scenario 2) select * from users where
password='#form.password#' ...is another story
Has anyone ever heard of a successful SQL injection attack in
a Scenario 2 situation.
I'll fix everything up eventually, but I've got a Pen Test
coming up soon, and a lot of raw code to review.
Thanks

quote:
Originally posted by:
Dan Bracuk
What others can do is more relevent than what we think. When
in doubt, test.
very true, although my final solution went more like, "When
in doubt, manually add about 600 cfqueryparams in 406 cfquery
tags".

Microsoft SQL 2005 WebServices - SOAP Result Parsing

Hello,
I have successfully connected to, sent a request and
retrieved a SOAP response from, the WebServices functionality
(ENDPOINT) using MS-SQL 2005. What I need to know how to do is
parse the SOAP response in FLEX as to access the actual data for
use in the application.
How do I extract only the node that contains the data and
then use this for binding my controls? I don't need any of the SOAP
header stuff in there. Of course I could loop through the
xyz.lastResult and parse onyl the parts I need to a new XML object,
but that seems a lot of processing for something that is almost
there.
Any help would be appreciated.
Sal

quote:
Originally posted by:
TN_SGIA
Hello,
I have successfully connected to, sent a request and
retrieved a SOAP response from, the WebServices functionality
(ENDPOINT) using MS-SQL 2005. What I need to know how to do is
parse the SOAP response in FLEX as to access the actual data for
use in the application.
Can you share the code to do that with me? I'm not good a
SOAP requests, and this would be an excelent contribution to my
project. Thank you.

Custom DTS package migration from BPC 4.2 ,SQL 2000 to BPC 7.0 M , SQL 2005

Is there any changes required in the custom dts package when migration from BPC 4.2 , sql 2000 Environment to bpc 7.0 , SQL 2005/2008 Environment.
or
Please suggest process for migrating custom dts package from BPC 4.2 ,SQL 2000 Envirnment to BPC 7.0 ,SQL 2005/2008 Environment

When you say "custom dts package" that can mean many different things. What type of customization has been done?
There are a few BPC-related features which changed from 4.2, which must be manually adjusted, if you're using those features.
But SQL itself also changed dramatically in moving from SQL 2000 to 2005. So if your customer's packages are heavily customized around SQL 2000, this may require substantial re-work.
The only migration process for custom DTS packages -- that I'm aware of -- is to use the SQL 2005 migration tool in SSIS, see how much it messed up, and then fix everything else that's still broken.
But there also may be opportunities to improve the package overall. SQL 2005 has a lot of great new features in SSIS, over what was there in SQL 2000.
I haven't started working with SQL 2008 yet, so I can't say what complexity there is in upgrading DTS packages from 2005 to 2008. From what I read in the BPC 7 release notes, it sounds like it's a very minor upgrade, compared to the jump from 2000 to 2005.

Version of MS SQL 2005 and # of processors

I'm trying to put together a complete package in order to get manager buyin to purchase the Discovery system. I see that it comes with a temporary license for Microsoft SQL 2005. When I approached our procurement agents to get a price for a permanant license, they had two questions. 1. Developer, Enterprise or Standard Edition? 2. How many processors? Can someone please provide these answers.
Thanks,

Teresa,
Discovery server using MS SQL 2005 Enterprise ed. and it has 2 - Dual cores Xeons...

SPS 2003 and MS SQL 2005 Server

I have a question? Can SPS 2003 use MS SQL 2005 Server?

I am not sure what is SPS In this context, but i understand from Shanky's answer that it is an external application (dose he mean SharePoint?)
[Personal Site] [Blog] [Facebook]

SQL 2005 Linked server to Oracle append

Hi Oracle Exprets,
i am using an SQl 2005 linked server too pull data from specific table in Oracle data base.
the thing is i have to pull data daily and append this data to the exsisting table.
here is my code :
EXEC sp_tables_ex @table_server ='LINKED_ORA',@table_schema='Myschema'
INSERT INTO dbo.ARS20091
SELECT * FROM OPENQUERY(LINKED_ORA,
'SELECT
TROUBLEID,
CREATE_DATE,
DATE ''1970-01-01'' + CREATE_DATE / 24 / 60 / 60
CREATEDATE
FROM CLIENT_TROUBLE
WHERE CREATE_DATE between ''1230768001'' AND ''1239043005''');
GO
this code works but i have to change the date daily and do a complete insert in a new table.
Is there a way to append data daily ?
thanks

Hi sanjay,
but why sysdate is giving me the today's date and when i use getdate ...it does not give me anything..
i am using openquery tooracle data base..usually i have to use Oracle command..
Mo..

Integrating MS SQL 2005 using DBAT Connector 9102

Hi,
I am trying to integrate MS SQL 2005 using DBAT Connector 9102 using GTC. My OIM version is 9102. Though the table exist in MS SQL still it is not able to find it.
It is able to connect but throwing error that table "test" does not exist.
I also tried to connect with small java program to test the connectivity
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
          con = DriverManager.getConnection("jdbc:sqlserver://<IP>;instanceName=<instance>;portNumber=1433", "sa", "******");
          System.out.println("connect done");
          stmt = con.createStatement();
          ResultSet rset = stmt.executeQuery("SELECT * FROM test");
It is throwing following error
com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'test'.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(SQLServerException.java:196)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(SQLServerStatement.java:1454)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(SQLServerStatement.java:786)
at com.microsoft.sqlserver.jdbc.SQLServerStatement$StmtExecCmd.doExecute(SQLServerStatement.java:685)
at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:4026)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1416)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(SQLServerStatement.java:185)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(SQLServerStatement.java:160)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeQuery(SQLServerStatement.java:620)
at TestingDB.main(TestingDB.java:33)
I have also tired to put 1433 port in firewall exception list but same result.
Any suggestion how to fix this issue?
Regards,
Sajid

just try the appending the username in the sql query .., select * from sa.test
- Double check that the table exist in the same schema which your are connecting
Thanks
Suren

I downloaded Mozilla 4 and tried to use it then, I had to delete it and go back to 3.6 vs now I am having problems with my MS SQL 2005 why? What was changed to enable Mozilla 4 to sync with MS SQL and how do I get it corrected?

After, trying Mozilla 4 beta and then having to go back to a previous vs of Mozilla 3.6.11 my MS OLE DB Provider for SQL 2005 Server has this error message '80040E57' I am using Windows 7 which was pre-installed on my new computer. I do not know how to fix it?

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

Dump while acessing tables in sql 2005 using DB connect

we have a sql 2000 as source system in place and now i created sql 2005 source system with DB connect.
bw version 3.0.
tables naming conventions are according to SAP.
when i click the button to show tables in source system (sql server) , it is throwing a short dump while connecting to data base.
I initially thought tahat something wrong with BW support pack , but my other sql connection is working perfectly fine.
plz help.
error in short dump
Error analysis
<b>Only message types A, E, I, W, S and X are allowed.
There is probably an error in the program
"RSDL_META_UPLOAD ".                               </b>
<b>MESSAGE_TYPE_UNKNOWN" C
RSDL_META_UPLOAD " or "RSDL_META_UPLOAD "
END-OF-SELECTION</b>"
> points will be awarded for useful inputs..
Message was edited by:
        aravind sam
Message was edited by:
        aravind sam

I am having the similar issue. I have DB connect to oracle schema, however, some of the tables I can view and access the data but others are throwing short dumps and following error:
Event with errors RSDL_META_UPLOAD in DataSource
I have applied support Pack 10 for BI. But this problem persist.
Any IDEA.
Thanks in Advance.
Shaukat

Trying to use Linked Servers in SQL 2005 to connect to RDB 7

I'm looking for detailed info on how to set up a linked server in SQL 2005 to connect to my Oracle RDB 7 database (running on VMS). I'm able to connect via odbc using VS.Net and Sql Server 2005 Reporting Services. I'm not sure if I need to use the ODP.NET or not. I have created a generic linked server, but it requires me to use the OpenQuery function to access the data, which is not giving me the functionality I'm looking for.

Hi doanpq,
Please download and install OLE DB Provider for Visual FoxPro 9.0, which exposes OLE DB interfaces that you can use to access Visual FoxPro databases and tables from other programming languages and applications. Please see:
http://www.microsoft.com/en-us/download/details.aspx?id=14839
Then, please follow up the following article to create a linked server:
Creating Linked Servers:
http://technet.microsoft.com/en-us/library/ff772782(v=sql.105).aspx
For more information, you can also take a look at the following article, especially Dave K's comment:
http://blog.dbase.integralwebsolutions.co.za/2008/10/accessing-your-dbf-tables-via-linked.html
Elvis Long
TechNet Community Support

Connect Non-SAP Oracle db (32bit) in sql 2005 (64 bit) using linked server

Hi,
I am connecting Oracle 10g database from SQL 2005 using linked server, in which i get the error
"Cannot initialize the data source object of OLE DB provider "MSDAORA" for linked server "L2ORACLE".
OLE DB provider "MSDAORA" for linked server "L2ORACLE" returned message "Oracle client and networking components
were not found. " (Microsoft SQL Server, Error: 7303)
SAP Server with sql 2005 db is in 64 bit server / Windows 2003
Non-SAP Oracle 10g is in 32 bit windows 2003 server.
i have installed Oracle 64 bit client in the SAP Server and also copied the 64 bit version of dboraslib.dll to the DIR_LIBRARY path. I am able to view the oracle tables in the oracle client.
But, when i create the linked server, it gives the above error.
If i install 32 bit version of Oracle client in the SAP Server, i am able to create the linked server in the db level, but, it says "Work Process restarted, session terminated" message in the Z program in SAP.
The same works in the test environment where both are 32 bit servers. problem is when SAP server is in 64 bit and non sap is in 32 bit.
Please suggest.
Thanks and Regards,
Nagu

"Cannot initialize the data source object of OLE DB provider "MSDAORA" for linked server "L2ORACLE".
OLE DB provider "MSDAORA" for linked server "L2ORACLE" returned message "Oracle client and networking components
were not found. " (Microsoft SQL Server, Error: 7303)
check the workprocess traces for errors (and/or SM21). It seems that the system is "not aware" that an Oracle client is installed.
64bit programs can´t load 32bit libraries/DLLs that´s why the workprocess dumps when you use the 32bit client.
Markus

ODI 10.1.3.4.0 - Topology Manager Connection Error using SQL 2005 SP3

Hello All,
I am using the ODI repository in SQL 2005 SP3. I could create my master repository using the following parameters:
driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
URL:jdbc:microsoft:sqlserver://server_name:1433;SelectMethod=direct;DataBaseName=ODI
I needed to copy to the drivers directory all files of SQL 2000 (msutil.jar, msbase.jar,mssqlserver.jar) and SQL 2005 (sqljdbc.jar). I am using the JRE 1.4.2 and JDBC 2005 1.2 (http://msdn.microsoft.com/en-us/library/ms378422(SQL.90).aspx)
But when I try to connect in Topology Manager to create the work repository appears the following error:
using this driver string: com.microsoft.jdbc.sqlserver.SQLServerDriver
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC] Can't start a cloned connection while in manual transaction mode.
using this driver string: com.microsoft.sqlserver.jdbc.SQLServerDriver
java.sql.SQLException: No suitable driver
Does Somebody know what is happening?
Regards,
Wallace Galvao
Sao Paulo - Brazil

Hi,
If you plan on using the SQL Server 2005 drivers then you only need the 1.2 sqljdbc.jar file in the drivers directory.
The connection details for SQL Server 2005 should be like the following.
com.microsoft.sqlserver.jdbc.SQLServerDriver
jdbc:sqlserver://<sqls machine>:1433;databaseName=<db name>;integratedSecurity=false
I would try just with just the correct driver in place, remove the others, restart any ODI components and then make sure the connection information is correct like above.
Cheers
John
http://john-goodwin.blogspot.com/

OIM 9.1 using MS SQL 2005

Similar Messages

Maybe you are looking for