OIM task Scheduler

Hi guys,
I have few doubts regarding OIM task scheduler:
1) I have defined a class to run using task schedler everyday. I like to set the status of task scheduler to COMPLETED or FAILED after each run. How can I achieve this?
2) Or I should not catch any exceptions in my code. So that it marks the task scheduler status as FAILED?
I have gone through below link about status of task scheduler but can't make out anything:
http://download.oracle.com/docs/cd/B31081_01/idmgr/b25940/oimadm.htm#CIADIAEJ

Hi,
I think that the BaseScheduledTask sets that status itself when it finishes its run. I've used "getStatusString" to set the task status during the reconciliation process.
By the way, if the Scheduled status is not NONE or INACTIVE when it finishes the job, I think OIM won't let you start again the Scheduled task (someone correct me if I'm wrong, plz, at least it happens when it Stucks on "Running").
In my case, "NONE" is the status that I get when the scheduled failed, and "INACTIVE" when succeed. So maybe you should try to throw the exception and see what happens.
Regards,

Similar Messages

OIM 11g scheduler parameter update

HI
I have scenario to read changelog through OIM scheduler from iplanet and update the last read changenumber in scheduler parameter. But i am not able to update the scheduler parameter. Can anybody please guide me how to update the scheduler parameter or is there any better way to store last read change number?
-Prakash

Have you tried the following way?
HashMap<String, String> map = new HashMap<String, String>();
map.put("Task Scheduler.Name", scheduleTaskName);
tcResultSet result = tcSchOp.findScheduleTasks(map);
long mainObjKey = result.getLongValue("Task Scheduler.Key");
tcResultSet result1 = tcSchOp.getScheduleTaskAttributes(mainObjKey);
String[] scheduledtaskattrs = result1.getColumnNames();
for (int i = 0; i < result1.getRowCount(); i++) {
   result1.goToRow(i);
   for (int j = 0; j < scheduledtaskattrs.length; j++) {
     if (scheduledtaskattrs[j] .equals("Task Scheduler.Task Attributes.Name")) {
          String taskname = result1 .getStringValue("Task Scheduler.Task Attributes.Name");
               if (taskname.equals(lastTimeAttributeName)) {
                    temp = result1 .getLongValue("Task Scheduler.Task Attributes.Key");
HashMap<String, String> updateMap = new HashMap<String, String>();
HashMap<String, String> updateMap = new HashMap<String, String>();
logger.debug("date == " + sdf.format(new Date()));
updateMap.put("Task Scheduler.Task Attributes.Name", lastTimeAttributeName);
updateMap.put("Task Scheduler.Task Attributes.Value", sdf .format(new Date()));
tcSchOp.updateScheduleTaskAttribute(mainObjKey, temp, updateMap);HTH,
BB

Error while runnig OIM task purging script OIM_TasksArch.sh

Error while runnig OIM task purging script OIM_TasksArch.sh
## Enter date in YYYYMMDD format
(All the task data for users which have been disabled/deleted on or before the entered date would be archived) :
## All the task data for users which have been disabled/deleted on or before TODAY's date would be archived,
Do you want to continue [y,Y,n,N]? :
y
Calculating the number of records that would be archived,
this may take some time, please wait...
ERROR ==> An error has occurred during the process
Please check logs created at /export/home/oracle/Purging_Task/Err_Arch_tasks_2012_11_05_16_51_22.log and try again
./OIM_TasksArch.sh: test: argument expected
bash-3.00$ cat /export/home/oracle/Purging_Task/Err_Arch_tasks_2012_11_05_16_51_22.log
-- Task Archival Execution Status
Task Data Archival Summary
ORA-00942: table or view does not exist

In this link you resolved this issue by giving all privileges to DEV_OIM...
Re: Getting error while running OIM in built purging script OIM_ReconArch.sh
Now if again this ORA-00942: table or view does not exist is coming, possibility is that there is no issue regarding privileges as you already have given all privileges to DEV_OIM...
Anyway try again giving full permissions to it just in case for some reasons permissions might have reset...
Now the only option is to study OIM_TasksArch.sh and figure out which tables or view it wants to refer to and is not available to it..
*./OIM_TasksArch.sh: test: argument expected*
The above line means that this sh file needs some arguments... Please study a bit more to figure out those arguments.. It will work...
*23.2.1 Understanding the Task Archival Utility*
http://docs.oracle.com/cd/E21764_01/doc.1111/e14308/archival_utilities.htm#OMADM3033
Following Parameters i.e. Arguments are needed
# File : OIM_TasksArch.sh
# Purpose : To archive data from active task tables to archival task
# tables and to delete data from active task tables.
# Arguments : 1 --> Location of the Oracle Home(ORACLE_HOME)
# 2 --> Oracle Identity Manager Database Name
# 3 --> Oracle Identity Manager Database User Name
# 4 --> Password for the Oracle Identity Manager Database User

KM Task Scheduler , retrieve IPortalComponentRequest request

Hello,
I would like to use KM Task Scheduler :
public void run( String id, Properties properties ) {
IPortalComponentRequest request;
String location = request.getPublicResourcePath();
It's normal, it doesn't work ! How can I use IPortalComponentRequest for my schedule task ?
Thanks a lot
Best regards,
Aurélien

Aurelien,
ok then, place your xml file into any package of your project. For example:
In package called "my.package.files" place file "myfile.xml"
then wherever within your code (let's assume you have an class called MySchedullerTask) call next structure:
URL url = MySchedullerTask.getClass().getClassLoader().getResource("my/package/files/myfile.xml");
and then work with the file.
Just one more note: non Java files are not build always into application PAR acrhive.
To do so, you have to check in option:
"Yes, I want the non java sources includet into the portal components jars"
You will find this option in NWDS:
Window -> Preferences -> SAP Enterprise Portal -> Application Development Studio.
regards
mz

Unable to receive an email by task scheduler on audit failure in windows server 2008 r2 security log

Deal All,
I am sorry in advance if i would be on wrong forum, i have created a task on Server 2008 r2 Domain controller that when an audit failure event triggered in windows security log then an email should reach on my email ID, but unfortunately, nothing happen
on audit failure.i receive no email from task scheduler.
kindly suggest me to resolve the issue. I have created Email task on event ID 4771.
Thanks.
Zeeshan Ibrahim Network Administrator

Hi Zeeshan,
I have found a hotfix against the same error messages, though it applies to Windows Vista and Windows Server 2008, I am not sure if it will work on your machine.
Please refer to this KB article below:
Duplicate triggers are generated incorrectly in scheduled tasks in Windows Vista or in Windows Server 2008
http://support.microsoft.com/kb/2617046
Please feel free to let us know if this hotfix couldn’t help you fix this issue.
Best Regards,
Amy Wang

Creating Oracle Job with Task Scheduler

Hi,
Platform: Oracle10g R2, Windows 2003 Server
I have the below script on my Linux server that backups up the database. It's run via crontab.
--------------- script ---------------------
-- Environment variables goes here
cd $ORACLE_HOME/bin
./rman target / <<EOF
startup mount;
backup database plus archivelog delete input;
delete noprompt obsolete;
alter database open;
I want something similar I can do on windows like .bat file that I can schedule to run via Task Scheduler.
Any help please?
Thnaks and regards,
Creems

Hi AG,
I tried to do that but it's not working.
But I did something similar for auto-delete of flashback logs and it works but the backup thing aint working.
What can I do?
Here is what I did for the auto-flashback delete
=======
RunSQL.bat
=======
-- content of RunSQL.bat
@ECHO OFF
TITLE Resetting Flashback Logs
CLS
ECHO Please be patient. This will take some time.
ECHO.
ECHO.
SET ORACLE_SID=PROD
sqlplus.exe /nolog @del_flashback.sql
ECHO.
ECHO.
ECHO FLASHBACKs reset. Please continue with your other procedures.
ECHO.
==========
del_flashback.sql
==========
-- content of del_flashback.sql
connect /nolog
conn sys/oracle as sysdba
SHOW USER
shutdown immediate
startup mount
alter database flashback off;
alter database flashback on;
alter database open;
SHOW USER
exit
This works, but when I did the same with RMAN backup it doesn't.
Any more help please?
Thanks and regards,
Creems

Use a "Write" Event on a Specific Drive or to a Specific Folder to Trigger a Task in Task Scheduler

I first posted this question on the Microsoft Community forum. It was suggested that I repost it here.
I have a question!
(Pleas forgive the long post...)
What I am trying to do: (This is what I have not yet figured out!)
I am trying to figure out how to trigger a task, in Windows Task Scheduler (WTS), whenever a "Disk Write" event occurs on a specified drive on the machine. - Or, more specifically, whenever a new file or folder is written or
saved to a specified Folder, or a specific Disk Partition, or a specific Hard Disk on the machine - whichever is more relevant for the end goal.
The overall goal:
When a "disk write" operation occurs and data is written to a specified location on a Hard Drive, start a Program at the beginning of the following hour, that will run a backup of the contents
of that location, (after - of course - the new data has been written). After the backup is complete, disallow the program from being started again at the beginning of the next hour, unless more data is written to the specified location beforehand.
Example:
At 2:27pm, I save a new word document to "D:\My Folder\". When the new Word doc file is saved to "D:\My Folder\", my preferred Backup software application is then scheduled to run a backup at the beginning of
the following hour - at 3:00pm - which will then create a new backup of "D:\My Folder\".
The backup software will NOT be scheduled to run again at the next following hour - at 4:00pm - unless another file or additional data is written to "D:\My Folder\" - between 3:00pm and 4:00pm.
Summary:
The goal here is to only run a backup at the beginning of the next hour, following a “disk write” event to a specified location on the hard drive.
Steps that I have, so far, on how to make this happen:
Whenever data is written to a specified location on a hard drive (i.e. "D:\My Folder\"), "Task A," in Windows Task Scheduler, will be triggered to execute its action.
The Action in "Task A" will run a script that changes the Status of "Task B" to ENABLED.
The Action in "Task B" will, on a continuous hourly schedule, start a program that will perform work on the machine. (In this case, it will run a Backup Task in my preferred backup software.)
Upon completion of work by that program (the Backup software), that program will run another script that will change the Status of "Task B" back to DISABLED; preventing "Task B" from continuing that program every hour
according to its hourly schedule.
How do I do this: ... ?
The thing holding me back on making this work is figuring out how to identify the source that generates the “disk write” event and event ID I need, so I can use it to trigger a task in Windows Task Scheduler - in the way that I need. Furthermore,
the “disk write” event needs to specific to a disk drive that I specify and if at all possible, specific to a location that I specify, i.e. “D:\My Folder\”.
Any help on this as well as other suggestions on making this work is greatly appreciated!
Ryan A Miller

Hello Ryan A Miller,
What is your current situation?
Have you try the script as Frederik Long mentioned?
To receive better support, it is recommended to post in the TechNet Script forum.
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
The professionals there will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

SyncToy 2.1 Can't Find NAS Folder When Run From Task Scheduler

I'm using SyncToy 2.1 to keep two WIN7 computers and a Synology DS414j NAS drive in sync. I have several folder pairs configured, some between the two PC's and three between one PC and the NAS drive. I have a task set up for automatic syncing. The problem
is SyncToy can't find the destination folders on the NAS drive if it's run from Task Scheduler. If I run SyncToy manually, everything works fine. I've even tried opening the command prompt and running the exact same program Task Scheduler is running (SyncToyCmd.exe
-R), and it works perfectly. But when Task Scheduler runs the task, it fails to find the NAS folders with the following error message:
SYNC: 08/21/2014 14:12:26:140: *** Failed to execute folder pair Downloads to NAS. Could not locate folder \\DISKSTATION\Downloads\.
I've been looking for days for a solution and have not found anyone with this problem. Any ideas?

Hi Texxxas,
Apparently the problem is not with SyncToy, it is with Task Scheduler. If you have had Task Scheduler work for you in the past, then I don't have an answer for that. I have never been able to get Task Scheduler to work correctly with SyncToy and a NAS drive.
I have found that for some reason it works with USB external HDD's but will not work with a network connected hard drive. The same bug exists in Win8.1 as well. However, I have since found a third party task scheduler that works perfectly with SyncToy and
my NAS drive. It is called System Scheduler by Splinterware. The free version only works when you are logged in but they have a paid version that runs as a service and will execute without being logged in. This has solved my problem.

Running a .cmd file at startup using Task Scheduler on Windows 2012 R2 server

Hello,
I've recently tried to get a simple .cmd file running at server startup on my Windows 2012 R2 server.
The .cmd (test.cmd) file contains the following:
C:
cd C:\SomeFolder\
call Some.exe file "Argument1" "Argument2"
I've ensured that the local administrator user [someuser01] has full control of the C:\SomeFolder
I've also ensured that someuser01 is part of Log on as Batch Job
in Local Security Policy
To try running it as startup, I tried using Task Scheduler.
General Tab: I set the user (local administrator account [someuser01] ) and ticked the options
Run whether logged on or not, Do not Store Password, Run with Highest Privileges
Triggers: At System Startup, Ticked Enabled
Actions: Start a Program. Program/Script: test.cmd, Add arguments: [Blank], Start in: C:\SomeFolder
Conditions: Unticked all conditions
Settings: Ticked only the following --> Allow task to be run on demand, If the running task does not end...force to stop
Then I clicked OK and was prompted for someuser01's credentials.
I then restarted the server.
Upon logging in as administrator, I checked the task scheduler, and I found that the task did not run (Last Run Time: Never)
I've been able to run it manually (click Run on the task in Task scheduler) without any problems.
I just cannot get it to run at startup as I've instructed Task Scheduler to do.
Any ideas on what might be causing this problem?
Thanks.

Hello Dave Patrick,
I've also tried this approach and I came across this error after I try to enter someuser01's credentials:
An error has occured for the task sometask01. Error message: The following error was reported: A specified logon session does not exist. It may already have been terminated..
After doing some research, this new error is caused by a setting in Local Security:
Local Security Policy --> Security Options --> Network Access: Do not allow storage of passwords and credentials for network authentication --> Enabled
Unfortunately, I cannot disable this Security Policy due to our company's internal restrictions.
Just to clarify, the reason that the task does not run at startup is because of a logon failure because the password was not stored for
someuser01 ?
However, I cannot allow storage of the password because of our our company's internal restrictions.
Is there a possible workaround for this..?
Thanks!

Windows task scheduler to run batch file running a java program

I have created a batch file that runs my SendEmail program. The batch file is in the same directory as the java program. The only line in the batch file is
java SendEmail
This works fine from the command prompt but from the windows task scheduler it fails to function. Any help on how I can overcome this problem will be greatly appreciated.
THanks

Looks okay. The classpath is set, too, I guess? Btw, try running javaw instead of java. I may err, but I think it can show a console, so you can watch any error messages.

Exchange 2013 mailbox auditing command with showdetails parameter in ps1 script is not working via task scheduler

Hi All ,
In my environment we are having exchange 2013 enterprise edition with SP1 which is installed in windows server 2012 standard edition.
We have enabled mailbox auditing for few mailboxes and also we have made simple powershell script with only the below mentioned commands .when i run the ps1 script in exchange management shell ,i can able to get the relevant output.
CMDLETS in powershell script :
Search-MailboxAuditLog -StartDate ((Get-Date).AddHours(-24)) -EndDate (Get-Date) -showdetails | fl >e:\output.txt
Note : we are having only the above commands in ps1 script , apart from that we don't have anything in it .
Sametime i have scheduled the same powershell script via task scheduler .But i cannot able to get the valid output ,instead of that i was getting a blank output file with no data in it .
Steps handled on my side to run the powershell script in task scheduler:
1.when i remove the parameter showdetails in the ps1 script ,i can able to get the output in the txt file .But in my scenario showdetails is the only parameter which will brought me more and in depth details about mailbox auditing.
The Difference what i have seen between exchange 2010 and exchange 2013
when in run the same powershell script via task scheduler in exchange 2010 enterprise environment installed in windows server 2008 r2 enterprise OS, i can able able to get the proper output without removing the showdetails parameter .
I am using the below methods to run the ps1 file via task scheduler in exchange 2013 environment .
program/script : C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Add arguments : -PSConsoleFile "E:\Program Files\Microsoft\Exchange Server\V15\Bin\exshell.psc1" -Command ". 'C:\scripts\MailboxAuditReport\test.ps1'"
I have mentioned the error below and that is the one what i have faced, when i try to run the PS1 script directly in windows powershell and not in exchange management shell .
Error message : "the requesting account does not have permission to access the audit log"
Please help me out to resolve this case .
Thanks
S.Nithyanandham

Hi All ,
In my environment we are having exchange 2013 enterprise edition with SP1 which is installed in windows server 2012 standard edition.
We have enabled mailbox auditing for few mailboxes and also we have made simple powershell script with only the below mentioned commands .when i run the ps1 script in
exchange management shell,i can able to get the relevant output.
CMDLETS in powershell script :
Search-MailboxAuditLog -StartDate ((Get-Date).AddHours(-24)) -EndDate (Get-Date) -showdetails | fl >e:\output.txt
Note : we are having only the above commands in ps1
script , apart from that we don't have anything in it .
In case, if i have scheduled the same powershell script via task scheduler .But i cannot able to get the valid output ,instead of that i was getting a blank output file with no data in it .
Steps
handled on my side to run the powershell script in task scheduler:
1.when i remove the parameter showdetails
in the ps1 script ,i can able to get the output in the txt file .But in my scenario showdetails is the only parameter which will brought me more and in depth details about mailbox auditing.
The
Difference what i have seen between exchange 2010 and exchange 2013
when in run the same powershell script via task scheduler in exchange 2010 enterprise environment installed in windows server 2008 r2 enterprise OS, i can able able to get the proper output without removing the showdetails parameter .
I
am using the below methods to run the ps1 file via task scheduler in exchange 2013 environment .
program/script : C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Add arguments : -PSConsoleFile "E:\Program
Files\Microsoft\Exchange Server\V15\Bin\exshell.psc1" -Command ". 'C:\scripts\MailboxAuditReport\test.ps1'"
I have mentioned the error below and that is the one what i have faced, when i try to run the PS1 script directly in windows powershell and not in exchange management shell .
Error message : "the requesting account does
not have permission to access the audit log"
Please help me out to resolve this case .
Thanks
S.Nithyanandham

Task Scheduler - Bad login when using the correct password

Greetings,
I have been working an issue with Task Scheduler for a while now. I have done the forum rumble as well and looked at most if not all the posts to no avail. So here is my setup is on Server 2008 R2 SP1:
I have a service accounts, we are looking to automate a basic file compile of data then a file copy. Nothing fancy however it is nothing I can share. I have all unc paths in the file so there is no odd drive latter mapping going on. The BAT file executes
without issue from a cmd prompt without issue nor error.
When I put it into Task Scheduler however things do not go so well. I have checked permissions: the account is a local admin to the system, it has the right to logon as a batch and service as well as create global objects. The account
has rights to the directories explicitly applied as well as in groups it is a part of. I can execute the task when running the console as the account, I can run the task when I relax a policy for Network access: store passwords, to allow the task
to run when the users is logged in or out. However when I run the task and check don't store the password it fails with the error that it is a bad logon user name and password are incorrect.
I swapped the target account to the local Admin GROUP and it works but this is not ideal for tracking and security reasons. I created a new group and gave it rights locally as above and add the account to it but that failed.
At this point having hit just about everything I can find to include path for Start In option, Run as highest privilege, changing to UNC, and explicit permissions I am not finding a light at the end of this tunnel.
I have a feeling there is something simple or maybe it is something I am not aware of. I had read a few places of a possible corrupt store for the password cache for Task Scheduler but I did not see that anything else on it beyond mention.
Any help ANYONE can provide on this would be greatly appreciated.

As you maybe looking for an update I did find a workaround but not a solution.
I went in and disabled the local storage of password block in the local system registry. This allowed the task to store the password for the task and work. We next ran GPUPDATE to reset the change but, DID NOT change the task itself and it worked.
So what does this mean?
From my perspective, we are seeing an issue or bug where the hand off of the account information to the S4U/system is dropping the account credentials and not storing the information as needed/required to run the task with the Do Not Store setting in
place. This narrows down things tremendously and I am going to proceed back to isolated testing on this issue. Meaning I am going to take the box back to square one and move it up progressively to see if I am missing a setting here or there to allow/disallow
the use of Do not Store Password for scheduled tasks.
I am not sure there is a MSMasters program for Task Scheduler but I think I should be able to apply for it now.
As always if you have an idea for me to try PLEASE POST IT. I will give it a whirl and report back in.

Require script or a method to Run .exe files on target computers using task scheduler or any other Windows server intigrated tool

Hi All,
We are outsourcing services to our clients. One of our clients whom we manage the whole Active directory / Exchange 2010 infrastructure have a requirement.
We would like to run a .exe file from one server to another server / servers remotely to generate a report. The challenge is that we do not have permissions on some servers to access so we cannot login manually and run the .exe file to generate that report.
(All are in the same domain restricted or non restricted)
The domain Administrator (Client) Has restricted us to login to those servers due to security reasons. And is not providing us permissions or not giving the username and password to login to those servers.
Requirement is :
To run a .exe file with some parameters in it on the restricted servers Via powershell script or task scheduler (As the task will be created by the domain admin in the server in which we have access by entering the domain account).
As we have to run this .exe file on around 60 servers (restricted) so an option should popup asking the name of the agent in which you want to RUN the .exe file or a source input via CSV will also be fine.
Can anyone tell me or can this be possible ? Is there any one who has made such a script.
Can anyone please help.
Gautam.75801

Hi Justin,
Thank you for the suggestion.
Below is the script what i Executed.
"C:\Windows\system32\PsExec.exe" @C:\HPS\Serverrlist.txt cmd /C "server name\C$\hps\hps.EXE"
Pause
I tried using PSExec. But in the LAB domain as well as in the production i tried this on servers in which i have full access. When i execute this i get the output as Access is denied. Below is the screenshot of the Error.
I have installed Psexec on both machines.
I have full admin rights to the shared folder or network location which i have scratched in the screenshot. Not sure why i am getting this error.
Also analysed the event logs and found a failure event once i execute this script.
A handle to an object was requested.
Subject:
Security ID:
Domain name\My username
Account Name:
Lg167978
Account Domain:
My Domain
Logon ID:
0x234992
Object:
Object Server:
Security
Object Type:
File
Object Name:
C:\Windows\System32\eventvwr.msc
Handle ID:
0x0
Process Information:
Process ID:
0x17e0
Process Name:
C:\Windows\System32\mmc.exe
Access Request Information:
Transaction ID:
{00000000-0000-0000-0000-000000000000}
Accesses:
READ_CONTROL
SYNCHRONIZE
WriteData (or AddFile)
AppendData (or AddSubdirectory or CreatePipeInstance)
WriteEA
ReadAttributes
WriteAttributes
Access Reasons:
READ_CONTROL: Granted by
D:(A;;0x1200a9;;;BA)
SYNCHRONIZE:
Granted by D:(A;;0x1200a9;;;BA)
WriteData (or AddFile):
Not granted
AppendData (or AddSubdirectory or CreatePipeInstance):
Not granted
WriteEA:
Not granted
ReadAttributes:
Granted by ACE on parent folder D:(A;;0x1301bf;;;BA)
WriteAttributes:
Not granted
Access Mask:
0x120196
Privileges Used for Access Check:
Restricted SID Count:
0
Can you help in solving this.
Gautam.75801

Batch/Powershell file wont run via Task Scheduler

Hello,
I'm having trouble getting my Powershell file to run from Task Schedule during logoff. In short, I'm trying to upload my NTUSER.DAT (roaming profile) to my profiles folder on the file server. Dynamic VLAN switching does not support roaming profiles thus
I have to use a script to solve this issue.
My powershell script is as follows:
start-sleep -s 15
Set-Content -Path "C:\Temp\log.txt" -Value "Hello World"
$FileServer = 10.10.5.5
$FQDN = "$Env:UserDomain"
$User = Get-WmiObject -Class Win32_NetworkLoginProfile | Sort-Object -Property LastLogon -Descending | Select-Object -Property * -First 1 | Where-Object {$_.LastLogon -match "(\d{14})"} | Foreach-Object { New-Object PSObject -Property @{ Name=$_.Name.TrimStart("$FQDN\") }} | Select -ExpandProperty Name
copy-item -path C:\Users\$User\NTUSER.DAT -destination \\$FileServer\Profiles$\$user.V2\ -force
copy-item -path C:\Users\$User\NTUSER.DAT -destination \\$FileServer\Profiles$\$user.V3\ -force
I have a task schedule to run as Domain Admin when event ID 4647 occurs (logoff). It is set to run with the Highest Privileges checked, also I have enabled to run weather the user is logged in or no. The Domain Admin account also has access to ever file,
both at source and destination. Set-ExecutionPolicy is set to unrestricted. The way I call the powershell script in Task Scheduler is:
Action: Start a program
Program/Script: C:\temp\launch.bat
The launch.bat contains the following:
Powershell.exe -executionpolicy unrestricted -File "CALL C:\temp\powershell.ps1"
The task is triggered each time when the user logs off, I have confirmed this in the logs. But the NTUSER.DAT file fails to copy over to the network, in fact the log.txt file isn't even generated. I have confirmed my code to work, it's just the task scheduler
part calling the code where I think it fails.
Can you guys point me in the right direction here? I know I'm close, but not sure what I'm missing.

Jrv,
Yes in my testing the task schedule is unreliable, I don't have any info on how long the profile is locked, thus I can't copy the profile to the server when the OS still has it locked.
What do you propose I change my vlan configuration to?
Thanks.
What you are trying to do cannot be done. That is why it is not being done. If you set up roaming profiles and redirected folders this would happen automatically. It would also happen very quickly. THat is because Windows posts cahnges
to teh roamed image as they happen. Only changes are copied. Items in teh registry which are only valid during logon (Dynamic Entries) are nver copied so updates that are not needed are not posted. It is these updates thaat can keep the registry
locked for a very long time.
If you scan your network you will likely find hives thaat are loaded with no one logged in. WIndows 7 and later have a utility that forces and unload after a few minutes. It posts the reson for the forced unload to the event log.
As for the VLAN it is likely not configured correctly. THe profile must be on a server that is available on the same net ID as the PC. YOu may also have to allow the switch to suspend if you are using per-user conenctions. Contact the VLAN
vendor and tell them about issues with Roamed profiles. THey will walk you through the setup. THe most common issue is thaat the switch specifies 1Gb and the server is set to 100Mb and the switch is not set to match the speed. THisis a simplpe
configuration error done by a tech who does not have much experience with VLANs. THey tend to think that setting everything to 1Gb or some other maximum will work but it won't. It can also be caused by a files server with a 1Gb card that is a pront
spooler spooling to a 100 or 10Mb older printer. This disrupts the card and the VLAN cannot attach to it until the spooler is dona nd the card can switch. It can also be caused by a bad card or a bad switch.
Then VLAN vendors techs are usually very good at troubleshooting this kind of issue. Remote VLAN logging and diagnostics can also pick out the issue.
¯\_(ツ)_/¯

Windows Server 2008 sp2 Task Scheduler missing next run time after restart

Hi,
I have the issue that there does not appear to be a fix for with a server 2008 sp2 (NOT R2) where after a restart all tasks are missing the next run time so I need to edit each task to add this time back in. I have tried the hotfix in KB 950035
but this when you run it is only for Vista and cannot be installed despite saying it's also for Server 2008.
For some reason also this is Task Scheduler version 1 not 2 which I thought came with windows since Vista so SP2 should have it.
Anyone got any ideas?
Thanks,

Hi Evans,
Would you please let us know current situation of this issue?
As Dave mentioned, Windows Server 2008 Service Pack 2 include all the previously released updates for Windows
Server 2008.
Based on your description, I understand that all scheduled tasks still miss the next run time on your Windows
Server SP2 when the server restart. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please open Properties of one problematic scheduled task, navigate to History tab, then
check if find some relevant events or errors. Those may help us to go further analyze.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

OIM task Scheduler

Similar Messages

Maybe you are looking for