OK CODE FOR bdc in clmm transaction
hi.
i have got a tricky situation on how to PAGE DOWN while entering values in table view control of clmm transaction .
here i have tried with 'NP','P','=P','PGDO' but it is not working in clmm transaction for Page down to enter values in multiple rows.
can anybody kindly assist me in this.
will be waiting for your response.
regards.
Varma.
Hi Swarna manu koti.
i was just tested with the following below code to check with one equipment and one charteristic value and then i tested inIE02 Tcode to check if the equip is assigned with new value but it is still showing the same old value.
ca n u just have alook at below code.
DATA:class_type TYPE klassenart VALUE '002',
object_table TYPE tabelle VALUE 'EQUI'.
DATA: g_target2_tab LIKE clsel_search_objects OCCURS 0 WITH HEADER LINE,
g_new_val_tab LIKE comw OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
g_target2_tab-object = 'W92576'.
g_target2_tab-status = '1'.
g_target2_tab-clint = '321'.
g_target2_tab-cuobj = '54765'.
APPEND g_target2_tab.
g_new_val_tab-atfel = 'W_MAX_SPEED'.
g_new_val_tab-atinn = '0000001197'.
g_new_val_tab-slwrt = 'W_MAX_SPEED'.
g_new_val_tab-attab = 'W_MAX_SPEED'.
g_new_val_tab-atfel = 'W_MAX_SPEED'.
g_new_val_tab-atwrt = '92'.
g_new_val_tab-catwrt = '92'.
APPEND g_new_val_tab.
CALL FUNCTION 'CLMM_MAINTAIN_CLASSIFICATIONS'
EXPORTING
class_type = class_type
object_table = object_table
key_date = rmclm-datuv
change_number = rmclf-aennr1
new_log = 'X'
test_run = g_test_flag
TABLES
OBJECTS = g_target2_tab
class_allocs_set = g_allocs_set_tab
class_allocs_del = g_allocs_del_tab
valuation_old = g_old_val_tab
valuation_new = g_new_val_tab
EXCEPTIONS
valuation_missing = 1
OTHERS = 2 .
regards.
Varma
Similar Messages
-
How to put a report which contains code for BDC in background
Hello Experts ,
Please provide your valuable opinions on following issue,
My BDC execution is taking longer time and it gives time out error. To avoid this problem i have created a separate report which l contains the BDC code (Call transaction ) and i have put this report for background execution. But upon doing this My BDC code is not performing the transaction call which it was performing when it was executed individually. In sm37 it shown the job that i am creating but nothing is actually happening as a result of transaction call.
The code that i have written is :
RFC code
SUBMIT ZREPORT AND RETURN.
RFC end
Z_REPORT .
PERFORM open_job.
PERFORM get_print_parameters.
PERFORM job_submit. here in Submit i have specified the another report name(zbdcreport) which contains the actual logic for bdc
PERFORM job_close.
Report END.
zbdcreport
The call transaction is as follows :
( CALL TRANSACTION TCODE USING BDCDATA
MODE 'N' "CTUMODE "N
UPDATE 'S' "CUPDATE "S
MESSAGES INTO MESSTAB .)
end zbdcreport
Can anybody provide the reason for the error .
Regards,
UmaHi
Check the code using this...
DATA: number TYPE tbtcjob-jobcount,
name TYPE tbtcjob-jobname VALUE 'JOB_TEST',
print_parameters TYPE pri_params.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = name
IMPORTING
jobcount = number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
SUBMIT submitable TO SAP-SPOOL
SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB name NUMBER number
AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = number
jobname = name
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF. -
ABAP code for calculation rule in transaction M/08
Hi,
In M/08 transaction, we need to do this:
When maintaining a PO, the user manually creates a condition like this:
ZXXX Value (+10 %) positive value.
However, in order to get the belonging negative condition (for accounting purpose), we need to automatically create that when the one above has been created:
Automatic at the same time:
ZYYY Value (- 10 %) negative value.
In transaction M/08 you can enter ABAP code to each condition in the calculation rule. How can I program that ZYYY is created at the same time as ZXXX, when created for a PO ?
Any help is appreciated.Hi Peter,
This calculations rules are know as routines you can create with them using T code VOFM and then go the menu option -
> Formula---->Condition value.Double click on that and you will get the ABAP code.
Here you can amend the existing one or can create the way you like your logic to move and assign it to M/08 T code.
Hope this will help you.
Thanks,
Birender Agnihotri -
Hello
Can anyone give me the code to upload data into 'KSU1' transaction( create cycle) through the function module 'KGAL_CREATE_CYCLE'.
Regards
Kiransee docuementation if avail. or try ur own if any issue over that code post it here ? dont ask complete code , first u have to try at ur end.
Regards
Peram -
Hi guys please give me sample code for call transaction that handles error
hi guys, please give me sample code for call transaction that handles error,
please send me the sample code in which there should be all decleration part and everything, based on the sample code i will develop my code.
please do help me as it is urgent.
thanks and regards.
prasadnn.Hi Prasad,
Check this code.
Source Code for BDC using Call Transaction
*Code used to create BDC
*& Report ZBDC_EXAMPLE *
*& Example BDC program, which updates net price of item 00010 of a *
*& particular Purchase order(EBELN). *
REPORT ZBDC_EXAMPLE NO STANDARD PAGE HEADING
LINE-SIZE 132.
Data declaration
TABLES: ekko, ekpo.
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekko-ebeln,
waers TYPE ekko-waers,
netpr TYPE ekpo-netpr,
err_msg(73) TYPE c,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko,
it_error TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_error TYPE t_ekko,
it_success TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_success TYPE t_ekko.
DATA: w_textout LIKE t100-text.
DATA: gd_update TYPE i,
gd_lines TYPE i.
*Used to store BDC data
DATA: BEGIN OF bdc_tab OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA: END OF bdc_tab.
*Used to stores error information from CALL TRANSACTION Function Module
DATA: BEGIN OF messtab OCCURS 0.
INCLUDE STRUCTURE bdcmsgcoll.
DATA: END OF messtab.
*Screen declaration
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME
TITLE text-001. "Purchase order Num
SELECT-OPTIONS: so_ebeln FOR ekko-ebeln OBLIGATORY.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME
TITLE text-002. "New NETPR value
PARAMETERS: p_newpr(14) TYPE c obligatory. "LIKE ekpo-netpr.
SELECTION-SCREEN END OF BLOCK block2.
*START-OF-SELECTION
START-OF-SELECTION.
Retrieve data from Purchase order table(EKKO)
SELECT ekkoebeln ekkowaers ekpo~netpr
INTO TABLE it_ekko
FROM ekko AS ekko INNER JOIN ekpo AS ekpo
ON ekpoebeln EQ ekkoebeln
WHERE ekko~ebeln IN so_ebeln AND
ekpo~ebelp EQ '10'.
*END-OF-SELECTION
END-OF-SELECTION.
Check data has been retrieved ready for processing
DESCRIBE TABLE it_ekko LINES gd_lines.
IF gd_lines LE 0.
Display message if no data has been retrieved
MESSAGE i003(zp) WITH 'No Records Found'(001).
LEAVE TO SCREEN 0.
ELSE.
Update Customer master data (instalment text)
LOOP AT it_ekko INTO wa_ekko.
PERFORM bdc_update.
ENDLOOP.
Display message confirming number of records updated
IF gd_update GT 1.
MESSAGE i003(zp) WITH gd_update 'Records updated'(002).
ELSE.
MESSAGE i003(zp) WITH gd_update 'Record updated'(003).
ENDIF.
Display Success Report
Check Success table
DESCRIBE TABLE it_success LINES gd_lines.
IF gd_lines GT 0.
Display result report column headings
PERFORM display_column_headings.
Display result report
PERFORM display_report.
ENDIF.
Display Error Report
Check errors table
DESCRIBE TABLE it_error LINES gd_lines.
If errors exist then display errors report
IF gd_lines GT 0.
Display errors report
PERFORM display_error_headings.
PERFORM display_error_report.
ENDIF.
ENDIF.
*& Form DISPLAY_COLUMN_HEADINGS
Display column headings
FORM display_column_headings.
WRITE:2 ' Success Report '(014) COLOR COL_POSITIVE.
SKIP.
WRITE:2 'The following records updated successfully:'(013).
WRITE:/ sy-uline(42).
FORMAT COLOR COL_HEADING.
WRITE:/ sy-vline,
(10) 'Purchase Order'(004), sy-vline,
(11) 'Old Netpr'(005), sy-vline,
(11) 'New Netpr'(006), sy-vline.
WRITE:/ sy-uline(42).
ENDFORM. " DISPLAY_COLUMN_HEADINGS
*& Form BDC_UPDATE
Populate BDC table and call transaction ME22
FORM bdc_update.
PERFORM dynpro USING:
'X' 'SAPMM06E' '0105',
' ' 'BDC_CURSOR' 'RM06E-BSTNR',
' ' 'RM06E-BSTNR' wa_ekko-ebeln,
' ' 'BDC_OKCODE' '/00', "OK code
'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'EKPO-NETPR(01)',
' ' 'EKPO-NETPR(01)' p_newpr,
' ' 'BDC_OKCODE' '=BU'. "OK code
Call transaction to update customer instalment text
CALL TRANSACTION 'ME22' USING bdc_tab MODE 'N' UPDATE 'S'
MESSAGES INTO messtab.
Check if update was succesful
IF sy-subrc EQ 0.
ADD 1 TO gd_update.
APPEND wa_ekko TO it_success.
ELSE.
Retrieve error messages displayed during BDC update
LOOP AT messtab WHERE msgtyp = 'E'.
Builds actual message based on info returned from Call transaction
CALL FUNCTION 'MESSAGE_TEXT_BUILD'
EXPORTING
msgid = messtab-msgid
msgnr = messtab-msgnr
msgv1 = messtab-msgv1
msgv2 = messtab-msgv2
msgv3 = messtab-msgv3
msgv4 = messtab-msgv4
IMPORTING
message_text_output = w_textout.
ENDLOOP.
Build error table ready for output
wa_error = wa_ekko.
wa_error-err_msg = w_textout.
APPEND wa_error TO it_error.
CLEAR: wa_error.
ENDIF.
Clear bdc date table
CLEAR: bdc_tab.
REFRESH: bdc_tab.
ENDFORM. " BDC_UPDATE
FORM DYNPRO *
stores values to bdc table *
--> DYNBEGIN *
--> NAME *
--> VALUE *
FORM dynpro USING dynbegin name value.
IF dynbegin = 'X'.
CLEAR bdc_tab.
MOVE: name TO bdc_tab-program,
value TO bdc_tab-dynpro,
'X' TO bdc_tab-dynbegin.
APPEND bdc_tab.
ELSE.
CLEAR bdc_tab.
MOVE: name TO bdc_tab-fnam,
value TO bdc_tab-fval.
APPEND bdc_tab.
ENDIF.
ENDFORM. " DYNPRO
*& Form DISPLAY_REPORT
Display Report
FORM display_report.
FORMAT COLOR COL_NORMAL.
Loop at data table
LOOP AT it_success INTO wa_success.
WRITE:/ sy-vline,
(10) wa_success-ebeln, sy-vline,
(11) wa_success-netpr CURRENCY wa_success-waers, sy-vline,
(11) p_newpr, sy-vline.
CLEAR: wa_success.
ENDLOOP.
WRITE:/ sy-uline(42).
REFRESH: it_success.
FORMAT COLOR COL_BACKGROUND.
ENDFORM. " DISPLAY_REPORT
*& Form DISPLAY_ERROR_REPORT
Display error report data
FORM display_error_report.
LOOP AT it_error INTO wa_error.
WRITE:/ sy-vline,
(10) wa_error-ebeln, sy-vline,
(11) wa_error-netpr CURRENCY wa_error-waers, sy-vline,
(73) wa_error-err_msg, sy-vline.
ENDLOOP.
WRITE:/ sy-uline(104).
REFRESH: it_error.
ENDFORM. " DISPLAY_ERROR_REPORT
*& Form DISPLAY_ERROR_HEADINGS
Display error report headings
FORM display_error_headings.
SKIP.
WRITE:2 ' Error Report '(007) COLOR COL_NEGATIVE.
SKIP.
WRITE:2 'The following records failed during update:'(008).
WRITE:/ sy-uline(104).
FORMAT COLOR COL_HEADING.
WRITE:/ sy-vline,
(10) 'Purchase Order'(009), sy-vline,
(11) 'Netpr'(010), sy-vline,
(73) 'Error Message'(012), sy-vline.
WRITE:/ sy-uline(104).
FORMAT COLOR COL_NORMAL.
ENDFORM. " DISPLAY_ERROR_HEADINGS
Hope this resolves your query.
Reward all the helpful answers.
Regards -
Code for va01 bdc table control
hi
i want to CODE FOR bdc table control VA01 (TCODE)
ASAPAwadhesh,
just refer:
Problem in the BDC Table Control for the T.Code VA01
BDC Uploading from flat file to VA01.
BDC For Line Items In Sales Order
dont forget reward.
Amit. -
Hi all,
Can anyone of you provide me complete BDC code for Transaction XD01.
An early reply will be highly appreciated and would be rewarded.
Regards,
NeerajHi Prakash
hope this code will help you.
ABAP BDC SAMPLE CODE XD01
Table/Structure declarations. *
TABLES : KNA1. "Customer master
Constants declarations. *
CONSTANTS : C_MODE VALUE 'A',
C_UPDATE VALUE 'S',
C_X VALUE 'X',
C_SESS TYPE APQI-GROUPID VALUE 'ZCUSTOMER', "Session Name
C_XD01 LIKE TSTC-TCODE VALUE 'XD01'.
Variable declarations. *
DATA : V_FNAME(15) VALUE SPACE, " Name of file to be created
V_FAILREC TYPE I, " No of failed records
V_MSG(255), " Message Text
V_ERRREC TYPE I, " No of failed records
V_LINES TYPE I, " No of records
V_BANKS(15), " Table column BANKS
V_BANKL(15), " Table column BANKL
V_BANKN(15), " Table column BANKN
V_TIDX(2) TYPE N. " Table row index
*-- FLAG DECLARATIONS
DATA : FG_DATA_EXIST VALUE 'X', " Check for data
FG_SESSION_OPEN VALUE ' '. " Check for Session Open
*-- MACRO DEFINITIONS
*-- Macro for BANKS
DEFINE BANKS.
CLEAR V_BANKS.
CONCATENATE 'KNBK-BANKS(' &1 ')' INTO V_BANKS.
CONDENSE V_BANKS.
END-OF-DEFINITION.
*-- Macro for BANKL
DEFINE BANKL.
CLEAR V_BANKL.
CONCATENATE 'KNBK-BANKL(' &1 ')' INTO V_BANKL.
CONDENSE V_BANKL.
END-OF-DEFINITION.
*-- Macro for BANKN
DEFINE BANKN.
CLEAR V_BANKN.
CONCATENATE 'KNBK-BANKN(' &1 ')' INTO V_BANKN.
CONDENSE V_BANKN.
END-OF-DEFINITION.
Structures / Internal table declarations *
*-- Structure to hold BDC data
TYPES : BEGIN OF T_BDCTABLE.
INCLUDE STRUCTURE BDCDATA.
TYPES END OF T_BDCTABLE.
*-- Structure to trap BDC messages
TYPES : BEGIN OF T_MSG.
INCLUDE STRUCTURE BDCMSGCOLL.
TYPES : END OF T_MSG.
*-- Structure to trap ERROR messages
TYPES : BEGIN OF T_ERR_MSG,
MESSAGE(255),
END OF T_ERR_MSG.
*--Internal table to store flat file data
DATA : BEGIN OF IT_KNA1 OCCURS 0,
KUNNR LIKE KNA1-KUNNR,
KTOKD LIKE T077D-KTOKD,
NAME1 LIKE KNA1-NAME1,
SORTL LIKE KNA1-SORTL,
ORT01 LIKE KNA1-ORT01,
PSTLZ LIKE KNA1-PSTLZ,
LAND1 LIKE KNA1-LAND1,
SPRAS LIKE KNA1-SPRAS,
LZONE LIKE KNA1-LZONE,
END OF IT_KNA1.
*--Internal table to store bank details
DATA : BEGIN OF IT_BANK OCCURS 0,
BANKS LIKE KNBK-BANKS,
BANKL LIKE KNBK-BANKL,
BANKN LIKE KNBK-BANKN,
END OF IT_BANK.
*-- Internal table to hold BDC data
DATA: IT_BDCDATA TYPE STANDARD TABLE OF T_BDCTABLE WITH HEADER LINE,
*-- Internal Table to store ALL messages
IT_MSG TYPE STANDARD TABLE OF T_MSG WITH HEADER LINE,
*-- Internal Table to store error messages
IT_ERR_MSG TYPE STANDARD TABLE OF T_ERR_MSG WITH HEADER LINE.
Selection Screen. *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FLNAME(15) OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R_LIST RADIOBUTTON GROUP GRP1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003.
PARAMETERS : R_SESS RADIOBUTTON GROUP GRP1.
SELECTION-SCREEN COMMENT 30(20) TEXT-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
Event:Initialization *
INITIALIZATION.
AT Selection Screen. *
AT SELECTION-SCREEN.
Event: Start-of-Selection *
START-OF-SELECTION.
V_FNAME = P_FLNAME.
PERFORM GET_DATA.
PERFORM GET_BANKDATA.
PERFORM GENERATE_DATASET.
Event: End-of-Selection *
END-OF-SELECTION.
IF FG_DATA_EXIST = ' '.
MESSAGE I010 WITH TEXT-009.
EXIT.
ENDIF.
PERFORM GENERATE_BDCDATA.
PERFORM DISPLAY_ERR_RECS.
Event: top-of-page
TOP-OF-PAGE.
FORM DEFINITIONS *
*& Form get_data
Subroutine to get the data from mard
--> p1 text
<-- p2 text
FORM GET_DATA.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = 'C:\XD01.TXT'
FILETYPE = 'DAT'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
DATA_TAB = IT_KNA1
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF IT_KNA1[] IS INITIAL.
FG_DATA_EXIST = ' '.
ENDIF.
ENDFORM. " get_data
*& Form GENERATE_DATASET
text
--> p1 text
<-- p2 text
FORM GENERATE_DATASET.
MESSAGE I010 WITH 'OPENING FILE IN APPLICATION SERVER'.
**--Creating a data set in application server
OPEN DATASET V_FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
**---Transfering data from internal table to dataset
MESSAGE I010 WITH 'TRANSFERING DATA FROM INETERAL TABLE TO THE FILE'.
LOOP AT IT_KNA1.
TRANSFER IT_KNA1 TO V_FNAME.
ENDLOOP.
**--Closing the dataset
MESSAGE I010 WITH 'CLOSING THE FILE'.
CLOSE DATASET V_FNAME.
ENDFORM. " GENERATE_DATASET
*& Form BDC_DYNPRO
text
-->P_0467 text
-->P_0468 text
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
*& Form BDC_FIELD
text
-->P_0472 text
-->P_0473 text
FORM BDC_FIELD USING FNAM FVAL.
IF NOT FVAL IS INITIAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDIF.
ENDFORM.
*& Form GENERATE_BDCDATA
text
--> p1 text
<-- p2 text
FORM GENERATE_BDCDATA.
REFRESH IT_KNA1.
Opening dataset for reading
OPEN DATASET V_FNAME FOR INPUT IN TEXT MODE ENCODING DEFAULT.
Reading the file from application server
DO.
CLEAR: IT_KNA1,IT_BDCDATA.
REFRESH IT_BDCDATA.
READ DATASET V_FNAME INTO IT_KNA1.
IF SY-SUBRC <> 0.
EXIT.
ELSE.
Populate BDC Data for Initial Screen
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0100',
BDC_FIELD USING 'BDC_CURSOR' 'RF02D-KUNNR',
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_FIELD USING 'RF02D-KUNNR' IT_KNA1-KUNNR,
BDC_FIELD USING 'RF02D-KTOKD' IT_KNA1-KTOKD.
Populate BDC Data for Second Screen
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0110',
BDC_FIELD USING 'BDC_CURSOR' 'KNA1-NAME1',
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_FIELD USING 'KNA1-NAME1' IT_KNA1-NAME1,
BDC_FIELD USING 'KNA1-SORTL' IT_KNA1-SORTL,
BDC_FIELD USING 'KNA1-ORT01' IT_KNA1-ORT01,
BDC_FIELD USING 'KNA1-PSTLZ' IT_KNA1-PSTLZ,
BDC_FIELD USING 'KNA1-LAND1' IT_KNA1-LAND1,
BDC_FIELD USING 'KNA1-SPRAS' IT_KNA1-SPRAS.
Populate BDC Data for Third Screen
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0120',
BDC_FIELD USING 'BDC_CURSOR' 'KNA1-LZONE',
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_FIELD USING 'KNA1-LZONE' IT_KNA1-LZONE.
Populate BDC Data for Fourth Screen
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0125',
BDC_FIELD USING 'BDC_CURSOR' 'KNA1-NIELS',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
Populate BDC Data for Table control for bank details.
V_TIDX = '01'.
LOOP AT IT_BANK.
BANKS V_TIDX.
BANKL V_TIDX.
BANKN V_TIDX.
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0130',
BDC_FIELD USING 'BDC_CURSOR' V_BANKN,
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_FIELD USING V_BANKS IT_BANK-BANKS,
BDC_FIELD USING V_BANKL IT_BANK-BANKL,
BDC_FIELD USING V_BANKN IT_BANK-BANKN.
V_TIDX = V_TIDX + 1.
ENDLOOP.
PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0130',
BDC_FIELD USING 'BDC_CURSOR' V_BANKS,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
CALL TRANSACTION C_XD01 USING IT_BDCDATA
MODE C_MODE
UPDATE C_UPDATE
MESSAGES INTO IT_MSG.
IF SY-SUBRC <> 0.
*--In case of error list display
IF R_LIST = C_X.
V_ERRREC = V_ERRREC + 1.
PERFORM FORMAT_MESSAGE.
IT_ERR_MSG-MESSAGE = V_MSG.
APPEND IT_ERR_MSG.
CLEAR : V_MSG,IT_ERR_MSG.
ENDIF.
*--In case of session log
IF R_SESS = C_X.
*-- In case of transaction fails.
IF FG_SESSION_OPEN = ' '.
FG_SESSION_OPEN = C_X.
PERFORM BDC_OPEN_GROUP.
ENDIF. " IF FG_SESSION_OPEN = ' '.
*-- Insert BDC Data..
PERFORM BDC_INSERT_DATA.
ENDIF. " IF R_SESS = C_X.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF SY-SUBRC <> 0.
ENDDO.
Closing the dataset
CLOSE DATASET V_FNAME.
*-- Close the session if opened
IF FG_SESSION_OPEN = C_X.
PERFORM BDC_CLOSE_GROUP.
CALL TRANSACTION 'SM35'.
ENDIF.
ENDFORM. " GENERATE_BDCDATA
*& Form BDC_OPEN_GROUP
text
--> p1 text
<-- p2 text
FORM BDC_OPEN_GROUP.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = C_SESS
HOLDDATE = FILLER8
KEEP = C_X
USER = SY-UNAME
RECORD = FILLER1
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BDC_OPEN_GROUP
*& Form BDC_INSERT_DATA
text
--> p1 text
<-- p2 text
FORM BDC_INSERT_DATA.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = C_XD01
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BDC_INSERT_DATA
*& Form BDC_CLOSE_GROUP
text
--> p1 text
<-- p2 text
FORM BDC_CLOSE_GROUP.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BDC_CLOSE_GROUP
*& Form FORMAT_MESSAGE
text
--> p1 text
<-- p2 text
FORM FORMAT_MESSAGE.
CLEAR V_LINES.
DESCRIBE TABLE IT_MSG LINES V_LINES.
READ TABLE IT_MSG INDEX V_LINES.
CLEAR V_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MSG-MSGID
LANG = IT_MSG-MSGSPRA
NO = IT_MSG-MSGNR
V1 = IT_MSG-MSGV1
V2 = IT_MSG-MSGV2
V3 = IT_MSG-MSGV3
V4 = IT_MSG-MSGV4
IMPORTING
MSG = V_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " FORMAT_MESSAGE
*& Form DISPLAY_ERR_RECS
text
--> p1 text
<-- p2 text
FORM DISPLAY_ERR_RECS.
LOOP AT IT_ERR_MSG.
WRITE: / IT_ERR_MSG-MESSAGE.
ENDLOOP.
ENDFORM. " DISPLAY_ERR_RECS
*& Form GET_BANKDATA
text
--> p1 text
<-- p2 text
FORM GET_BANKDATA.
IT_BANK-BANKS = 'AD'.
IT_BANK-BANKL = '1000'.
IT_BANK-BANKN = 'S.B A/C'.
APPEND IT_BANK.
IT_BANK-BANKS = 'AD'.
IT_BANK-BANKL = 'CITY'.
IT_BANK-BANKN = 'CURR. A/C'.
APPEND IT_BANK.
IT_BANK-BANKS = 'AD'.
IT_BANK-BANKL = 'H001'.
IT_BANK-BANKN = 'S.B A/C'.
APPEND IT_BANK.
reward if help. -
Hi All,,
Please give Entire BDC code for MM01 Transaction.
i will change as per my requirement.
I think this is already done by some ABAP Consultants.
plz dont give answers like do recording for that transaction MM01. I know recording...
For time constraiint, I have to complete soon.....
Thanks in Advance
BestRegards,
AnilHi,
The below code is using the Session Method
report ZDS_BDC_MM01
no standard page heading line-size 255.
include bdcrecx1.
*parameters: dataset(132) lower case.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record OCCURS 0,
* data element: MATNR
MATNR_001(018),
* data element: MBRSH
MBRSH_002(001),
* data element: MTART
MTART_003(004),
* data element: XFELD
KZSEL_01_004(001),
* data element: XFELD
KZSEL_02_005(001),
* data element: MAKTX
MAKTX_006(040),
* data element: MEINS
MEINS_007(003),
* data element: MAKTX
MAKTX_008(040),
end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME ='C:\DHRUV.TXT'
FILETYPE = 'DAT'
* HAS_FIELD_SEPARATOR = ' '
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = RECORD
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*do.
LOOP AT record.
*read dataset dataset into record.
if sy-subrc <> 0. exit. endif.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
record-MATNR_001.
perform bdc_field using 'RMMG1-MBRSH'
record-MBRSH_002.
perform bdc_field using 'RMMG1-MTART'
record-MTART_003.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-KZSEL_01_004.
perform bdc_field using 'MSICHTAUSW-KZSEL(02)'
record-KZSEL_02_005.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX_006.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
record-MEINS_007.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MAKT-MAKTX'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX_008.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM01'.
*enddo.
ENDLOOP.
perform close_group.
*perform close_dataset using dataset.
*Text elements
* E00 Error opening dataset, return code:
* I01 Session name
* I02 Open session
* I03 Insert transaction
* I04 Close Session
* I05 Return code =
* I06 Error session created
* S01 Session name
* S02 User
* S03 Keep session
* S04 Lock date
* S05 Processing Mode
* S06 Update Mode
* S07 Generate session
* S08 Call transaction
* S09 Error sessn
* S10 Nodata indicator
* S11 Short log
*Messages
* Message class: MS
*613 Please enter a session name and user name
The Below is the coding for the Call Transaction...
report ZDS_BDC_MM01_2
no standard page heading line-size 255.
*include bdcrecx1.
*parameters: dataset(132) lower case.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record OCCURS 0,
* data element: MATNR
MATNR_001(018),
* data element: MBRSH
MBRSH_002(001),
* data element: MTART
MTART_003(004),
* data element: XFELD
KZSEL_01_004(001),
* data element: MAKTX
MAKTX_005(040),
* data element: MEINS
MEINS_006(003),
* data element: MTPOS_MARA
MTPOS_MARA_007(004),
end of record.
DATA: FLNAME TYPE STRING.
*** End generated data section ***
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*** MESSAGE******
DATA: BEGIN OF MESSTAB OCCURS 0.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: MATNR TYPE MARA-MATNR,
END OF MESSTAB.
****END OF MESSAGE****
PARAMETERS: FILENAME TYPE RLGRAP-FILENAME.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILENAME.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
FILE_NAME = FILENAME.
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
FLNAME = FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FLNAME
FILETYPE = 'DAT'
* HAS_FIELD_SEPARATOR = ' '
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = record
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT record.
DATA:
CNT TYPE I.
CNT = CNT + 1.
REFRESH BDCDATA.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MTART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
record-MATNR_001.
perform bdc_field using 'RMMG1-MBRSH'
record-MBRSH_002.
perform bdc_field using 'RMMG1-MTART'
record-MTART_003.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-KZSEL_01_004.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX_005.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
record-MEINS_006.
perform bdc_field using 'MARA-MTPOS_MARA'
record-MTPOS_MARA_007.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
*perform bdc_transaction using 'MM01'.
CALL TRANSACTION 'MM01' USING BDCDATA
MODE 'N'
UPDATE 'A'
MESSAGES INTO MESSTAB.
READ TABLE MESSTAB INTO MESSTAB INDEX CNT.
IF MESSTAB-MSGTYP = 'E'.
MESSTAB-MATNR = RECORD-MATNR_001.
MODIFY MESSTAB INDEX CNT FROM MESSTAB. " TRANSPORTING MATNR.
ENDIF.
ENDLOOP.
FORM OPEN_GROUP.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING CLIENT = SY-MANDT
GROUP = 'MM01'
USER = SY-UNAME
KEEP = 'X'.
ENDFORM.
FORM BDC_INSERT.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'MM01'
* POST_LOCAL = NOVBLOCAL
* PRINTING = NOPRINT
* SIMUBATCH = ' '
* CTUPARAMS = ' '
TABLES
DYNPROTAB = BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
END-OF-SELECTION.
LOOP AT MESSTAB.
IF MESSTAB-MSGTYP = 'E'.
WRITE:/ 'ERROR OCCURED ON MATNR = ',MESSTAB-MATNR , 'MESSAGE : MATNR ALREADY EXISTS IN MARA!!!'.
ENDIF.
ENDLOOP.
perform close_group.
*perform close_dataset using dataset.
*& Form close_group
* text
* --> p1 text
* <-- p2 text
FORM close_group .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " close_group
*& Form bdc_dynpro
* text
* -->P_0270 text
* -->P_0271 text
FORM bdc_dynpro USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. " bdc_dynpro
*& Form bdc_field
* text
* -->P_0275 text
* -->P_0276 text
FORM bdc_field USING FNAM FVAL.
IF FVAL <> ' '.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDIF.
ENDFORM. " bdc_field
*Text elements
* E00 Error opening dataset, return code:
* I01 Session name
* I02 Open session
* I03 Insert transaction
* I04 Close Session
* I05 Return code =
* I06 Error session created
* S01 Session name
* S02 User
* S03 Keep session
* S04 Lock date
* S05 Processing Mode
* S06 Update Mode
* S07 Generate session
* S08 Call transaction
* S09 Error sessn
* S10 Nodata indicator
* S11 Short log
HTH
Regards,
Dhruv Shah -
Need BDC code for Call Transaction of VL31N, which creates Inbound del.s,
Hi Experts,
Is any body does have the BDC (CALL TRANSACTION) code for VL31N transaction, where we can crete INBOUND deliveries from Purc Orders.
Actually, currently am doing by using FM - GN_DELIVERY_CREATE, but, its not given me a chance to incorporate BATCH SPLIT functionality. So, decided to go with BDC
1 - Is this VL31N is Okay for BDC, bcoz, some where I red that, since its a ENJOY tx, its NOT recommended?
2 - Is there any other FM, BAPI to create INBOUND deliveries from POs, which can take care of BATCH SPLIT functionality?
3 - BDC code for VL31N tx.
thanq
Edited by: Srinivas on Jul 29, 2008 1:47 PM1 - Is this VL31N is Okay for BDC, bcoz, some where I red that, since its a ENJOY tx, its NOT recommended?
yes you can do that .
2 - Is there any other FM, BAPI to create INBOUND deliveries from POs, which can take care of BATCH SPLIT functionality?
using BDC we can achieve the Barch split functionality.
3 - BDC code for VL31N tx.
Record using SHDB it will give you. -
Wanted a code for table controls in bdc
hi,
i have written code for uploading data into FB60 transaction but i have a serious problem with that code.
after entering 10 line items and when i am entering 11th item it is saying that the screen doesnot contain 11th line.
so please modify my program or if you can please send me a program for handling table controls more line details.
thanks and i will surely provide ten points to it.
my code is
LOOP AT I_PREPARE INTO WA_PREPARE.
V_VALUE = WA_PREPARE-LINE+0(2).
CASE V_VALUE.
WHEN 'A'.
CLEAR:V_DCNT.
*UPLOAD THE COMPANY CODE TO FB60.
*PERFORM.......USING WA_PREPARE-LINE+2(4).
*? filling header data
*********to initialize the company code and to get the popup**********
PERFORM SET_BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLACHD' '1000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'BKPF-BUKRS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
BUKRS = WA_PREPARE-LINE+2(4).
PERFORM BDC_FIELD USING 'BKPF-BUKRS'
BUKRS.
PERFORM BDC_DYNPRO USING 'SAPMF05A' '1100'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF05A-BUSCS'
'R'.
*UPLOAD THE VENDOR NUMBER TO FB60
*PERFORM.......USING WA_PREPARE-LINE+45(10).
ACCNT = WA_PREPARE-LINE+45(10).
PERFORM BDC_FIELD USING 'INVFO-ACCNT'
ACCNT.
*UPLOAD THE DATE TO FB60
WRITE WA_PREPARE-LINE+34(8) TO V_DATE USING EDIT MASK ' . . .'
*PERFORM.......USING V_DATE.
PERFORM BDC_FIELD USING 'INVFO-BLDAT'
'15.09.2004'.
PERFORM BDC_FIELD USING 'INVFO-BUDAT'
'15.09.2004'.
*UPLOAD THE AMOUNT TO FB60
*PERFORM.......USING WA_PREPARE-LINE+85(15).
WRBTR = WA_PREPARE-LINE+85(15).
PERFORM BDC_FIELD USING 'INVFO-WRBTR'
WRBTR.
*UPLOAD THE CURRENCY CODE TO FB60
*PERFORM.......USING WA_PREPARE-LINE+100(3).
WAERS = WA_PREPARE-LINE+100(3).
PERFORM BDC_FIELD USING 'INVFO-WAERS'
WAERS.
WHEN 'D'.
V_DCNT = V_DCNT + 1.
IF V_DCNT GT 04.
V_DCNT = 04.
ENDIF.
*UPLOAD THE G/L ACC. TO FB60.
*PERFORM.......USING WA_PREPARE-LINE+51(20).
*? filling item data
CONCATENATE 'ACGL_ITEM-WRBTR(' V_DCNT ')' INTO FNAM.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
FNAM.
CONCATENATE 'ACGL_ITEM-HKONT(' V_DCNT ')' INTO FNAM.
HKONT = WA_PREPARE-LINE+51(20).
PERFORM BDC_FIELD USING FNAM
HKONT.
*UPLOAD THE AMOUNT TO FB60(ACGL_ITEM-WRBTR)
*PERFORM........USING WA_PREPARE-LINE+121(15).
CONCATENATE 'ACGL_ITEM-WRBTR(' V_DCNT ')' INTO FNAM.
WRBTR = WA_PREPARE-LINE+75(15).
PERFORM BDC_FIELD USING FNAM
WRBTR.
PERFORM BDC_DYNPRO USING 'SAPMF05A' '1100'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=0006'.
PERFORM BDC_FIELD USING 'RF05A-BUSCS'
'R'.
ENDCASE.hi,
check this example:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
REPORT ZSR_BDC_TBCTRL
NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
LIFNR LIKE RF02K-LIFNR,
KTOKK LIKE RF02K-KTOKK,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
LAND1 LIKE LFA1-LAND1,
SPRAS LIKE LFA1-SPRAS,
BANKS(6) TYPE C,
BANKL(17) TYPE C,
BANKN(19) TYPE C,
END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
BANKS LIKE LFBK-BANKS,
END OF BANKS,
BEGIN OF BANKL OCCURS 0,
BANKL LIKE LFBK-BANKL,
END OF BANKL,
BEGIN OF BANKN OCCURS 0,
BANKN LIKE LFBK-BANKN,
END OF BANKN.
DATA : FLD(20) TYPE C,
CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'Z:\sr.TXT'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
REFRESH BDCDATA.
REFRESH : BANKS,BANKL,BANKN..
SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
IT_VEN-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
IT_VEN-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
IT_VEN-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
IT_VEN-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
IT_VEN-LAND1.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
IT_VEN-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
*perform bdc_field using 'LFBK-BANKS(01)'
'DE'.
*perform bdc_field using 'LFBK-BANKS(02)'
'DE'.
*perform bdc_field using 'LFBK-BANKL(01)'
'10020030'.
*perform bdc_field using 'LFBK-BANKL(02)'
'67270003'.
*perform bdc_field using 'LFBK-BANKN(01)'
'12345'.
*perform bdc_field using 'LFBK-BANKN(02)'
'66666'.
MOVE 1 TO CNT.
LOOP AT BANKS.
CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKS-BANKS.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKL.
CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKL-BANKL.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKN.
CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKN-BANKN.
CNT = CNT + 1.
ENDLOOP.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP. -
Urgent,need for code in bdc for co02
hi all,
im in urgent need of code for developing bdc tcode co02.
Thanks for your help..1. Please record the transaction which you need to change the data in Co02 (Shop Order/Prod. Order)
2. Create BDC program as normally you do it for normal BDC programs..
Smaple Code with Recording.
clear: bdcdata,messtab.
perform bdc_dynpro using: 'SAPLCOKO1' '0110'.
perform bdc_field using: 'CAUFVD-AUFNR' t_aufk-aufnr.
perform bdc_field using: 'R62CLORD-FLG_OVIEW' 'X'.
perform bdc_field using: 'BDC_OKCODE' '/00'.
perform bdc_dynpro using: 'SAPLCOKO1' '0115'.
perform bdc_field using: 'BDC_SUBSCR' 'SAPLCOKO1'.
perform bdc_field using: 'BDC_OKCODE' '=KOWE'.
perform bdc_dynpro using: 'SAPLCOKO1' '0115'.
perform bdc_field using: 'BDC_SUBSCR' 'SAPLCOKO1'.
perform bdc_field using: 'BDC_CURSOR' 'AFPOD-INSMK'.
perform bdc_field using: 'AFPOD-INSMK' 'S'.
perform bdc_field using: 'BDC_OKCODE' '=BU'.
call transaction 'CO02' using bdcdata mode 'A'
update 'S'
messages into messtab.
Thanks, -
Bdc code for transfer of asset plant wise stock transfer (urgent)
hi all,
if anyone has done BDC for this scenario ie.,
bdc for transfer of asset plant wise stock transfer
then plz share its code with me.and if someone has done any modification regarding this scenario then plz let me know that what modification he/she has carried out in this & share the code for the same.
i will be grateful to u for this and promise that i will give points to all ur effort.
Thanks & regards
SanjeevHi Sanjeev,
Do a recording for the transaction using SHDB. Once you are done with the recording save the recording into a zprogram. You have the code.
Regards
Arun -
Hi Experts,
CAn someone please explain how to use a transaction code in BDC???Hi Manpreet,
I think you are asking how to call transaction using BDC.
If I am not wrong , hope this code will be helpful for u.
Thanks.
REPORT ZBDC_EXAMPLE NO STANDARD PAGE HEADING
LINE-SIZE 132.
Data declaration
TABLES: ekko, ekpo.
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekko-ebeln,
waers TYPE ekko-waers,
netpr TYPE ekpo-netpr,
err_msg(73) TYPE c,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko,
it_error TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_error TYPE t_ekko,
it_success TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_success TYPE t_ekko.
DATA: w_textout LIKE t100-text.
DATA: gd_update TYPE i,
gd_lines TYPE i.
*Used to store BDC data
DATA: BEGIN OF bdc_tab OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA: END OF bdc_tab.
*Used to stores error information from CALL TRANSACTION Function Module
DATA: BEGIN OF messtab OCCURS 0.
INCLUDE STRUCTURE bdcmsgcoll.
DATA: END OF messtab.
*Screen declaration
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME
TITLE text-001. "Purchase order Num
SELECT-OPTIONS: so_ebeln FOR ekko-ebeln OBLIGATORY.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME
TITLE text-002. "New NETPR value
PARAMETERS: p_newpr(14) TYPE c obligatory. "LIKE ekpo-netpr.
SELECTION-SCREEN END OF BLOCK block2.
*START-OF-SELECTION
START-OF-SELECTION.
Retrieve data from Purchase order table(EKKO)
SELECT ekkoebeln ekkowaers ekpo~netpr
INTO TABLE it_ekko
FROM ekko AS ekko INNER JOIN ekpo AS ekpo
ON ekpoebeln EQ ekkoebeln
WHERE ekko~ebeln IN so_ebeln AND
ekpo~ebelp EQ '10'.
*END-OF-SELECTION
END-OF-SELECTION.
Check data has been retrieved ready for processing
DESCRIBE TABLE it_ekko LINES gd_lines.
IF gd_lines LE 0.
Display message if no data has been retrieved
MESSAGE i003(zp) WITH 'No Records Found'(001).
LEAVE TO SCREEN 0.
ELSE.
Update Customer master data (instalment text)
LOOP AT it_ekko INTO wa_ekko.
PERFORM bdc_update.
ENDLOOP.
Display message confirming number of records updated
IF gd_update GT 1.
MESSAGE i003(zp) WITH gd_update 'Records updated'(002).
ELSE.
MESSAGE i003(zp) WITH gd_update 'Record updated'(003).
ENDIF.
Display Success Report
Check Success table
DESCRIBE TABLE it_success LINES gd_lines.
IF gd_lines GT 0.
Display result report column headings
PERFORM display_column_headings.
Display result report
PERFORM display_report.
ENDIF.
Display Error Report
Check errors table
DESCRIBE TABLE it_error LINES gd_lines.
If errors exist then display errors report
IF gd_lines GT 0.
Display errors report
PERFORM display_error_headings.
PERFORM display_error_report.
ENDIF.
ENDIF.
*& Form DISPLAY_COLUMN_HEADINGS
Display column headings
FORM display_column_headings.
WRITE:2 ' Success Report '(014) COLOR COL_POSITIVE.
SKIP.
WRITE:2 'The following records updated successfully:'(013).
WRITE:/ sy-uline(42).
FORMAT COLOR COL_HEADING.
WRITE:/ sy-vline,
(10) 'Purchase Order'(004), sy-vline,
(11) 'Old Netpr'(005), sy-vline,
(11) 'New Netpr'(006), sy-vline.
WRITE:/ sy-uline(42).
ENDFORM. " DISPLAY_COLUMN_HEADINGS
*& Form BDC_UPDATE
Populate BDC table and call transaction ME22
FORM bdc_update.
PERFORM dynpro USING:
'X' 'SAPMM06E' '0105',
' ' 'BDC_CURSOR' 'RM06E-BSTNR',
' ' 'RM06E-BSTNR' wa_ekko-ebeln,
' ' 'BDC_OKCODE' '/00', "OK code
'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'EKPO-NETPR(01)',
' ' 'EKPO-NETPR(01)' p_newpr,
' ' 'BDC_OKCODE' '=BU'. "OK code
Call transaction to update customer instalment text
CALL TRANSACTION 'ME22' USING bdc_tab MODE 'N' UPDATE 'S'
MESSAGES INTO messtab.
Check if update was succesful
IF sy-subrc EQ 0.
ADD 1 TO gd_update.
APPEND wa_ekko TO it_success.
ELSE.
Retrieve error messages displayed during BDC update
LOOP AT messtab WHERE msgtyp = 'E'.
Builds actual message based on info returned from Call transaction
CALL FUNCTION 'MESSAGE_TEXT_BUILD'
EXPORTING
msgid = messtab-msgid
msgnr = messtab-msgnr
msgv1 = messtab-msgv1
msgv2 = messtab-msgv2
msgv3 = messtab-msgv3
msgv4 = messtab-msgv4
IMPORTING
message_text_output = w_textout.
ENDLOOP.
Build error table ready for output
wa_error = wa_ekko.
wa_error-err_msg = w_textout.
APPEND wa_error TO it_error.
CLEAR: wa_error.
ENDIF.
Clear bdc date table
CLEAR: bdc_tab.
REFRESH: bdc_tab.
ENDFORM. " BDC_UPDATE
FORM DYNPRO *
stores values to bdc table *
--> DYNBEGIN *
--> NAME *
--> VALUE *
FORM dynpro USING dynbegin name value.
IF dynbegin = 'X'.
CLEAR bdc_tab.
MOVE: name TO bdc_tab-program,
value TO bdc_tab-dynpro,
'X' TO bdc_tab-dynbegin.
APPEND bdc_tab.
ELSE.
CLEAR bdc_tab.
MOVE: name TO bdc_tab-fnam,
value TO bdc_tab-fval.
APPEND bdc_tab.
ENDIF.
ENDFORM. " DYNPRO
*& Form DISPLAY_REPORT
Display Report
FORM display_report.
FORMAT COLOR COL_NORMAL.
Loop at data table
LOOP AT it_success INTO wa_success.
WRITE:/ sy-vline,
(10) wa_success-ebeln, sy-vline,
(11) wa_success-netpr CURRENCY wa_success-waers, sy-vline,
(11) p_newpr, sy-vline.
CLEAR: wa_success.
ENDLOOP.
WRITE:/ sy-uline(42).
REFRESH: it_success.
FORMAT COLOR COL_BACKGROUND.
ENDFORM. " DISPLAY_REPORT
*& Form DISPLAY_ERROR_REPORT
Display error report data
FORM display_error_report.
LOOP AT it_error INTO wa_error.
WRITE:/ sy-vline,
(10) wa_error-ebeln, sy-vline,
(11) wa_error-netpr CURRENCY wa_error-waers, sy-vline,
(73) wa_error-err_msg, sy-vline.
ENDLOOP.
WRITE:/ sy-uline(104).
REFRESH: it_error.
ENDFORM. " DISPLAY_ERROR_REPORT
*& Form DISPLAY_ERROR_HEADINGS
Display error report headings
FORM display_error_headings.
SKIP.
WRITE:2 ' Error Report '(007) COLOR COL_NEGATIVE.
SKIP.
WRITE:2 'The following records failed during update:'(008).
WRITE:/ sy-uline(104).
FORMAT COLOR COL_HEADING.
WRITE:/ sy-vline,
(10) 'Purchase Order'(009), sy-vline,
(11) 'Netpr'(010), sy-vline,
(73) 'Error Message'(012), sy-vline.
WRITE:/ sy-uline(104).
FORMAT COLOR COL_NORMAL.
ENDFORM. " DISPLAY_ERROR_HEADINGS
Edited by: Navdeep Malik on Dec 24, 2008 6:33 AM
Edited by: Navdeep Malik on Dec 24, 2008 7:02 AM -
Hi..!!
I need t-code for GL Account,...
What r the t-code Available for this...
I want to know how to upload this t-code through BDC...Hi,
Create new General Ledger Accounts Transaction: FS01
refer to the link below:
http://www.sap-img.com/financial/sap-fi-transaction-code-list-1.htm
with luck,
pritam. -
Creation of Transaction code for Reports created in FGI1.
Hi all,
We are in ECC 6.0 version. We have created one report for Profit Center Group Wise Receivables with transaction code FGI1. When we executed the report from FGI5 , it was showing the values correctly.
We created the t.code for the report painter programe and tried to execute. The screen is different from that of T.Code: FGI4. When we executed , it was not showing any values. I created authorisation for the report and also for the transaction codes.
Appreciate your suggestion at the earliest.
Thanks
DasaHi
Check TSTCP table for the existing t-codes and for creating check this link
Re: Transaction Code Creation for a Table/View
Regards
Pavan
Maybe you are looking for
-
HR Report for finding details for the new hires and leavers
Dear All, I am very new to SAP HR ABAP. Need Help I have to create a report which fetches all the details <Details are mentioned below> for all the 1) New hires 2) Leavers in between a time range. <Details to be fetched :~ Title Fax Mobile N
-
dear Sir we have window 7 for new oc as soon runned teh program cv01n i got run time error msg CX_SY_CONVERSION_OVERFLOW,plese guide Runtime Errors CONVT_OVERFLOW Except.
-
Mac G£ (B&G) OS 10.3.9 - Difficulties installing OS 10.4
I purchased OS 10.4 with the intention of upgrading my son's Mac G3 from OS 10.3.9. to OS 10.4 as he wishes to use iMovie HD. I have thus far failed to do that despite numerous attempts and, I think, following all the advice in the installation guide
-
How do I deauthorize my computer in Adobe Digital Editions program?
I authorized my computer with the incorrect Adobe ID, but now I cannot authorize my computer with the correct Adobe ID. It will not let me deauthorize the wrong account nor allow me to authorize the correct account.
-
PC Software saying 'component update needed' every time I try to update my phone software.
I recently downloaded the PC software and tried to update my phone but when I clicked update it said that a component of the PC software needed updated so I closed all the programmes running like it said and allowed it to update. However it has not s