Urgent,need for code in bdc for co02

hi all,
im in urgent need of code for developing bdc tcode co02.
Thanks for your help..

1. Please record the transaction which you need to change the data in Co02 (Shop Order/Prod. Order)
2. Create BDC program as normally you do it for normal BDC programs..
Smaple Code with Recording.
clear: bdcdata,messtab.
perform bdc_dynpro using: 'SAPLCOKO1' '0110'.
perform bdc_field using: 'CAUFVD-AUFNR' t_aufk-aufnr.
perform bdc_field using: 'R62CLORD-FLG_OVIEW' 'X'.
perform bdc_field using: 'BDC_OKCODE' '/00'.
perform bdc_dynpro using: 'SAPLCOKO1' '0115'.
perform bdc_field using: 'BDC_SUBSCR' 'SAPLCOKO1'.
perform bdc_field using: 'BDC_OKCODE' '=KOWE'.
perform bdc_dynpro using: 'SAPLCOKO1' '0115'.
perform bdc_field using: 'BDC_SUBSCR' 'SAPLCOKO1'.
perform bdc_field using: 'BDC_CURSOR' 'AFPOD-INSMK'.
   perform bdc_field using: 'AFPOD-INSMK' 'S'.
perform bdc_field using: 'BDC_OKCODE' '=BU'.
call transaction 'CO02' using bdcdata mode 'A'
                                        update 'S'
                                        messages into messtab.
Thanks,

Similar Messages

Urgently need a Technical Specification Document for any java development

hi friends,
I urgently need a tech spec doc for any java developments , wanted to refer for creating templates for a product . Please help its very urgent.
Thanks

Here are a couple of hundred technical specifications for a wide variety of Java development projects:
http://jcp.org/en/jsr/all

Urgent -Need to Add new values for the LOV field in forms

HI,
I am customizing an existing form. In that i need to add some values for the LOV fied which can be used during run time.
Please Can some one help me in doing this?
Thanks
Suresh P

Go to Navigator and edit the LOV or create a new one.
hope that helps!

For writing a BDC for MIGO

Hi,
Can i write a BDC for Automatic good recipt in MIGO on the save of inbound delivery.
Regards.

Hello,
It is hard to do BDC on Enjoy transactions based on Control Framework. For MIGO, you can use BAPI_GOODSMVT_CREATE.
Thanks,
Venu

Urgent need of code for abap hr program

Hi,
Can any one provide with coding to calculate the leave balance for employee
for a given period. Its very urgent.
Thanks in advance,
Subha

Hi
See this sample code for calculation of absence quota
using 2001 and 2006 infotypes
make changes as per your requirement
REPORT zh_absence_quota
 NO STANDARD PAGE HEADING
 MESSAGE-ID zh_msg
 LINE-SIZE 169
 LINE-COUNT 60(1).
 T A B L E S D E C L A R A T I O N S
TABLES: pernr, " Logical PNP
 t001p, " Personnel Subarea
 t529u, " Employment Status
 t500p, " Personnel Area
 t501, " Employee Group
 t503k, " Employee Subgroup
 t549a, " Payroll Area
 t554s, " Absence Type
 t554t, " Absence Type Texts
 t556a, " Quota Type
 t527x, " Orgn. Unit
 t556b, " Quota Type Text
 pa0003. " Payroll Status
INFOTYPES:
 0000, " Actions
 0001, " Organizational Assignment
 2006, " Absence Quota
 2001. " Absences
 T Y P E S D E C L A R A T I O N S
Employee Absence Structure
TYPES: BEGIN OF s_2001,
 pernr TYPE persno, " Personal Number
 awart TYPE awart, " Absence Type
 subty TYPE subty, " Sub Type
 endda TYPE endda, " End date
 begda TYPE begda, " Begin date
 abrtg TYPE abrtg, " Absence days
 ename TYPE emnam, " employee Name
 atext TYPE abwtxt, " Absence Type Text
 END OF s_2001.
Employee Absence Quota Structure
TYPES: BEGIN OF s_2006,
 pernr TYPE persno, " Personal Number
 ktart TYPE abwko, " Absence Quota Type
 year(4) TYPE n, " Year
 subty TYPE subty, " Sub Type
 endda TYPE endda, " End date
 begda TYPE begda, " Begin date
 anzhl TYPE ptm_quonum, " Absence Entitlement days
 ename TYPE emnam, " employee Name
 ktext TYPE kotxt, " Absence Type Text
 kverb TYPE kverb, " Deduction Quota days
 anzhb TYPE ptm_quonum, " Balance days
 END OF s_2006.
Combined Employee Absence and Quota Structure
TYPES: BEGIN OF s_rep,
 pernr TYPE persno, " Personal Number
 ktart TYPE abwko, " Absence Quota Type
 year(4) TYPE n, " Year
 anzhl TYPE ptm_quonum, " Absence Entitlement days
 kverb TYPE kverb, " Deduction Quota days
 anzhb TYPE ptm_quonum, " Balance days
 ktext TYPE kotxt, " Quota Type Text
 awart TYPE awart, " Absence Type
 abrtg TYPE abrtg, " Absence days
 ename TYPE emnam, " employee Name
 atext TYPE abwtxt, " Absence Type Text
 endda TYPE endda, " End date
 begda TYPE begda, " Begin date
 END OF s_rep.
Declaration of Variables
DATA : gv_atext TYPE abwtxt, " Absence Type Text
 gv_ktext TYPE kotxt, " Absence Type Text
 gv_title1 TYPE sylisel, " Report title
 gv_year(4) TYPE c, " Year
 gv_mon(2) TYPE c, " Month
 gv_hrs TYPE abwtg, " Hours
 gv_date TYPE sydatum, " Date
 gv_date1 TYPE sydatum, " Date
 gv_dial. " Color flag
Declaration of Constants
CONSTANTS :
c_x TYPE c VALUE 'X', " Sign
c_1 TYPE persg VALUE '1', " Emp Group
c_pernr(8) TYPE n VALUE '00000000', " Pernr
c_moabw TYPE moabw VALUE '01', " Per SA Grouping
c_mozko TYPE mozko VALUE '01', " Per SA Grouping
c_mopgk TYPE mopgk VALUE '1', " Emp SGrp Grouping
c_endda TYPE sydatum VALUE '99991231', " End Date
c_val1(2) TYPE c VALUE '31', " Date Type
c_val2(2) TYPE c VALUE '12', " Date Type
c_val LIKE p0041-dar01 VALUE '01', " Date Type
c_date1 LIKE sy-datum VALUE '18000101'. " Date
 I N T E R N A L T A B L E S D E C L A R A T I O N S
DATA: i_2001 TYPE STANDARD TABLE OF s_2001 WITH HEADER LINE,
 i_2006 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
 i_rep1 TYPE STANDARD TABLE OF s_2006 WITH HEADER LINE,
 i_rep TYPE STANDARD TABLE OF s_rep WITH HEADER LINE.
 S E L E C T I O N S C R E E N
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_ktart FOR t556a-ktart, " Absence Quota Type
 s_awart FOR t554s-subty. " Absence Type
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-003. " Quota & Absence
PARAMETERS: p_qa RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-004. " Quota
PARAMETERS: p_q RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(33) text-005. " Absence
PARAMETERS: p_a RADIOBUTTON GROUP rb1.
SELECTION-SCREEN END OF LINE.SELECTION-SCREEN END OF BLOCK b2.
 I N I T I A L I Z A T I O N *
INITIALIZATION.
 A T S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_screen.
 S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Selection of Period
PERFORM get_period.
Get PERNR from LDB
GET pernr.
IF p0000-stat2 <> '0'.
Get the data from PA0001,PA2001, PA2006
 PERFORM get_pers_data.
ENDIF.
 T O P - O F - P A G E *
TOP-OF-PAGE.
Header of the List
PERFORM header.
 E N D - O F - P A G E *
Footer
END-OF-PAGE.
IF p_qa = c_x.
Display both Absence and Quota Data
 WRITE /1(188) sy-uline.
ELSEIF p_q = c_x.
Display only Quota Data
 WRITE /1(114) sy-uline.
ELSEIF p_a = c_x.
Display only Absence Data
 WRITE /1(125) sy-uline.
ENDIF.
 E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
Combine the Absence and Quota Data
PERFORM append_data.
IF p_qa = c_x.
Display both Absence and Quota Data
 PERFORM display_qa_data.
ELSEIF p_q = c_x.
Display only Quota Data
 PERFORM display_q_data.
ELSEIF p_a = c_x.
Display only Absence Data
 PERFORM display_a_data.
ENDIF.
*& Form validate_screen
Validation of Selection Screen fields
FORM validate_screen .
Validation of Personnel Number
CLEAR pa0003.
IF NOT pnppernr[] IS INITIAL.
 SELECT pernr
 FROM pa0003 UP TO 1 ROWS
 INTO pa0003-pernr
 WHERE pernr IN pnppernr.
 ENDSELECT.
 IF sy-subrc <> 0.
 MESSAGE e999 WITH 'Incorrect Personnel Number'(006).
 ENDIF.
ENDIF.
Validation of Employee Status
CLEAR t529u.
IF NOT pnpstat2[] IS INITIAL.
 SELECT SINGLE statv
 INTO t529u-statv
 FROM t529u
 WHERE statv IN pnpstat2 AND
 statn = '2' AND
 sprsl = sy-langu.
 IF sy-subrc <> 0.
 MESSAGE e999 WITH 'Invalid Employee Status'(007).
 ENDIF.
ENDIF.
Validation of Personnel Area
CLEAR t500p.
IF NOT pnpwerks[] IS INITIAL.
 SELECT persa
 FROM t500p UP TO 1 ROWS
 INTO t500p-persa
 WHERE persa IN pnpwerks.
 ENDSELECT.
 IF sy-subrc <> 0.
 MESSAGE e999 WITH 'Incorrect Personnel Area'(008).
 ENDIF.
ENDIF.
Validation of Personnel Sub Area
CLEAR t001p.
IF NOT pnpbtrtl[] IS INITIAL.
 SELECT btrtl
 FROM t001p UP TO 1 ROWS
 INTO t001p-btrtl
 WHERE btrtl IN pnpbtrtl.
 ENDSELECT.
 IF sy-subrc <> 0.
 MESSAGE e999 WITH 'Incorrect Personnel Sub Area'(009).
 ENDIF.
ENDIF.
Validation of Employee Group
CLEAR t501.
IF NOT pnppersg[] IS INITIAL.
 SELECT persg
 FROM t501 UP TO 1 ROWS
 INTO t501-persg
 WHERE persg IN pnppersg.
 ENDSELECT.
 IF sy-subrc <> 0.
 MESSAGE e999 WITH 'Incorrect Employee Group'(010).
 ENDIF.
ENDIF.
Validation of Employee Sub Group
CLEAR t503k.
IF NOT pnppersk[] IS INITIAL.
 SELECT persk
 FROM t503k UP TO 1 ROWS
 INTO t503k-persk
 WHERE persk IN pnppersk.
 ENDSELECT.
 IF sy-subrc <> 0.
 MESSAGE e999 WITH 'Incorrect Employee Sub Group'(011).
 ENDIF.
ENDIF.
Validation of Payroll Area
CLEAR t549a.
IF NOT pnpabkrs[] IS INITIAL.
 SELECT abkrs
 FROM t549a UP TO 1 ROWS
 INTO t549a-abkrs
 WHERE abkrs IN pnpabkrs.
 ENDSELECT.
 IF sy-subrc <> 0.
 MESSAGE e999 WITH 'Incorrect Employee Payroll Area'(026).
 ENDIF.
ENDIF.
Validation of Absence Type
CLEAR t554s.
IF NOT s_awart[] IS INITIAL.
 SELECT subty
 FROM t554s UP TO 1 ROWS
 INTO t554s-subty
 WHERE subty IN s_awart AND
 moabw EQ c_moabw AND
 endda EQ c_endda.
 ENDSELECT.
 IF sy-subrc <> 0.
 MESSAGE e999 WITH 'Incorrect Employee Absence Type'(012).
 ENDIF.
ENDIF.
Validation of Absence Quota Type
CLEAR t556a.
IF NOT s_ktart[] IS INITIAL.
 SELECT ktart
 FROM t556a UP TO 1 ROWS
 INTO t556a-ktart
 WHERE ktart IN s_ktart AND
 mopgk EQ c_mopgk AND
 mozko EQ c_mozko AND
 endda EQ c_endda.
 ENDSELECT.
 IF sy-subrc <> 0.
 MESSAGE e999 WITH 'Incorrect Employee Quota Type'(013).
 ENDIF.
ENDIF.
ENDFORM. "validate_screen
*& Form get_period
Get the Correct Period based on Selection screen selection
FORM get_period.
CLEAR: gv_year,gv_mon, gv_date, gv_date1.
gv_year = sy-datum+0(4).
gv_mon = sy-datum+4(2).
IF pnptimr1 = c_x. " Current Date
 pnpbegda = sy-datum.
 pnpendda = sy-datum.
ELSEIF pnptimr2 = c_x. " Current Month
 CONCATENATE gv_year gv_mon c_val INTO gv_date.
 CONCATENATE gv_year gv_mon c_val1 INTO gv_date1.
 pnpbegda = gv_date.
 pnpendda = gv_date1.
ELSEIF pnptimr3 = c_x. " Current Year
 CONCATENATE gv_year c_val c_val INTO gv_date.
 CONCATENATE gv_year c_val2 c_val1 INTO gv_date1.
 pnpbegda = gv_date.
 pnpendda = gv_date1.
ELSEIF pnptimr4 = c_x. " Upto Today
 pnpbegda = c_date1.
 pnpendda = sy-datum.
ELSEIF pnptimr5 = c_x. " From Today
 pnpbegda = sy-datum.
 pnpendda = c_endda.
ELSE.
 IF ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
 pnpbegda = c_date1.
 pnpendda = c_endda.
 ELSEIF pnpbegda IS INITIAL AND NOT pnpendda IS INITIAL.
 pnpbegda = c_date1.
 pnpendda = pnpendda.
 ELSEIF NOT ( pnpbegda IS INITIAL AND pnpendda IS INITIAL ).
 pnpbegda = pnpbegda.
 pnpendda = pnpendda.
 ENDIF.
ENDIF.
ENDFORM. "get_period
*& Form get_pers_data
Get the Absence and Quota Data from PA0001,PA2001,PA2006
FORM get_pers_data.
DATA: lv_year1(4) TYPE n,
 lv_year2(4) TYPE n,
 lv_date1 TYPE sydatum,
 lv_date2 TYPE sydatum,
 lv_anzhb TYPE ptm_quonum. " Last Year Balance days
Get data from Respective Infotypes
rp_provide_from_last p0001 space pnpbegda pnpendda.
Absence Data
LOOP AT p2001 WHERE pernr = pernr-pernr AND
 begda GE pnpbegda AND
 endda LE pnpendda.
 IF p2001-awart IN s_awart.
 i_2001-pernr = pernr-pernr.
 i_2001-subty = p2001-subty.
 i_2001-awart = p2001-awart.
 i_2001-abrtg = p2001-abrtg.
 i_2001-begda = p2001-begda.
 i_2001-endda = p2001-endda.
 READ TABLE p0001 WITH KEY pernr = p2001-pernr.
 i_2001-ename = p0001-ename.
Get the Absence Type Text
 CLEAR gv_atext.
 SELECT SINGLE atext INTO gv_atext FROM t554t
 WHERE sprsl = sy-langu AND
 moabw = c_moabw AND
 awart = p2001-awart.
 IF sy-subrc = 0.
 i_2001-atext = gv_atext.
 ENDIF.
 APPEND i_2001.
 CLEAR i_2001.
 ENDIF.
ENDLOOP.
Quota Data
LOOP AT p2006 WHERE pernr = pernr-pernr AND
 begda GE pnpbegda AND
 endda LE pnpendda.
 IF p2006-ktart IN s_ktart.
 i_2006-pernr = pernr-pernr.
 i_2006-subty = p2006-subty.
 i_2006-begda = p2006-begda.
 i_2006-endda = p2006-endda.
 i_2006-year = p2006-endda+0(4).
 i_2006-ktart = p2006-ktart.
 i_2006-anzhl = p2006-anzhl.
 i_2006-kverb = p2006-kverb.
 i_2006-anzhb = p2006-anzhl - p2006-kverb.
 READ TABLE p0001 WITH KEY pernr = p2001-pernr.
 i_2006-ename = p0001-ename.
Get the Quota Type Text
 CLEAR gv_ktext.
 SELECT SINGLE ktext INTO gv_ktext FROM t556b
 WHERE sprsl = sy-langu AND
 mopgk = c_mopgk AND
 mozko = c_mozko AND
 ktart = p2006-ktart.
 IF sy-subrc = 0.
 i_2006-ktext = gv_ktext.
 ENDIF.
 APPEND i_2006.
 CLEAR i_2006.
 ENDIF.
ENDLOOP.
For Vacation Quota (80) get the Balance of the Last Year and
add to the Current Year Quota
LOOP AT i_2006.
 IF i_2006-ktart = '80'.
 lv_year1 = i_2006-endda+0(4).
 lv_year2 = lv_year1 - 1.
 CONCATENATE lv_year2 '01' '01' INTO lv_date1.
 CONCATENATE lv_year2 '12' '31' INTO lv_date2.
 LOOP AT p2006 WHERE pernr = i_2006-pernr AND
 begda GE lv_date1 AND
 endda LE lv_date2 AND
 ktart = '80'.
 lv_anzhb = p2006-anzhl - p2006-kverb.
 i_rep1-pernr = i_2006-pernr.
 i_rep1-ktext = i_2006-ktext.
 i_rep1-anzhl = p2006-anzhl.
 i_rep1-kverb = p2006-kverb.
 i_rep1-ename = i_2006-ename.
 i_rep1-begda = p2006-begda.
 i_rep1-endda = p2006-endda.
 i_rep1-anzhb = lv_anzhb.
 i_rep1-ktart = '80'.
 i_rep1-year = lv_year2.
 APPEND i_rep1.
 CLEAR: i_rep1.
 ENDLOOP.
 ENDIF.
 CLEAR: lv_year1, lv_year2,
 lv_date1, lv_date2,lv_anzhb.
ENDLOOP.
SORT i_rep1 BY pernr ktart.
ENDFORM. "get_pers_data
*& Form append_data
Put the Absence and Quota Data into one Report Int Table
FORM append_data.
CLEAR: i_rep.
REFRESH: i_rep.
SORT i_2001 BY pernr awart.
SORT i_2006 BY pernr ktart year.
Move I_REP1 data into i_2006
LOOP AT i_rep1.
 MOVE-CORRESPONDING i_rep1 TO i_2006.
 APPEND i_2006.
 CLEAR i_2006.
ENDLOOP.
Move the Absence and Quota Data into a final Int Table
LOOP AT i_2006.
 i_rep-pernr = i_2006-pernr.
 i_rep-ename = i_2006-ename.
 i_rep-ktart = i_2006-ktart.
 i_rep-anzhl = i_2006-anzhl.
 i_rep-kverb = i_2006-kverb.
 i_rep-ktext = i_2006-ktext.
 i_rep-anzhb = i_2006-anzhb.
 i_rep-year = i_2006-year.
 CLEAR i_2001.
 CASE i_2006-ktart.
 WHEN '81'.
 PERFORM get_2001 USING i_2006-pernr '1000' i_2006-year.
 WHEN '50'.
 PERFORM get_2001 USING i_2006-pernr '1002' i_2006-year.
 WHEN '80'.
 PERFORM get_2001 USING i_2006-pernr '1001' i_2006-year.
 WHEN '56'.
 PERFORM get_2001 USING i_2006-pernr '1003' i_2006-year.
 WHEN '51'.
 PERFORM get_2001 USING i_2006-pernr '1004' i_2006-year.
 WHEN '52'.
 PERFORM get_2001 USING i_2006-pernr '1005' i_2006-year.
 WHEN '54'.
 PERFORM get_2001 USING i_2006-pernr '1006' i_2006-year.
 WHEN '53'.
 PERFORM get_2001 USING i_2006-pernr '1007' i_2006-year.
 WHEN '55'.
 PERFORM get_2001 USING i_2006-pernr '1008' i_2006-year.
 WHEN '57'.
 PERFORM get_2001 USING i_2006-pernr '1009' i_2006-year.
 WHEN '90'.
 PERFORM get_2001 USING i_2006-pernr '2000' i_2006-year.
 WHEN '58'.
 PERFORM get_2001 USING i_2006-pernr '2001' i_2006-year.
 WHEN '59'.
 PERFORM get_2001 USING i_2006-pernr '2002' i_2006-year.
 WHEN '91'.
 PERFORM get_2001 USING i_2006-pernr '2003' i_2006-year.
 ENDCASE.
 IF sy-subrc <> 0.
 APPEND i_rep.
 ENDIF.
 CLEAR i_rep.
ENDLOOP.
SORT i_rep BY pernr ktart year.
DELETE i_rep WHERE pernr = ' '.
ENDFORM. " append_data
*& Form display_qa_data
Display the Absence and Quota Data
FORM display_qa_data.
DATA: lv_flag, " New Flag
 lv_tot2 TYPE ptm_quonum. " Absence Balance days
IF i_rep[] IS INITIAL.
 MESSAGE i000 WITH 'No Data found'(014).
ELSE.
 LOOP AT i_rep.
toggle color
 PERFORM toggle_color.
 IF lv_flag <> space.
 NEW-LINE.
 ENDIF.
 AT NEW pernr.
 READ TABLE i_rep INDEX sy-tabix.
 WRITE:/1 sy-vline,2(8) i_rep-pernr,
 10 sy-vline,11(40) i_rep-ename.
 ENDAT.
 AT NEW ktart.
 READ TABLE i_rep INDEX sy-tabix.
 WRITE: 1 sy-vline, 10 sy-vline,
 51 sy-vline,52(25) i_rep-ktext.
 ENDAT.
 AT NEW year.
 READ TABLE i_rep INDEX sy-tabix.
 WRITE: 1 sy-vline, 10 sy-vline,
 51 sy-vline,
 77 sy-vline, 78(4) i_rep-year,
 82 sy-vline, 83(11) i_rep-anzhl,
 94 sy-vline, 95(25) i_rep-atext,
 120 sy-vline,133 sy-vline,
 144 sy-vline,
 155 sy-vline,156(13) i_rep-anzhb,
 169 sy-vline.
 lv_tot2 = lv_tot2 + i_rep-anzhb.
 ENDAT.
 WRITE: 1 sy-vline, 10 sy-vline,
 51 sy-vline, 77 sy-vline,
 82 sy-vline, 94 sy-vline,
 120 sy-vline,121(12) i_rep-abrtg NO-ZERO,
 133 sy-vline,134(10) i_rep-begda NO-ZERO,
 144 sy-vline,145(10) i_rep-endda NO-ZERO,
 155 sy-vline,169 sy-vline.
 NEW-LINE.
 AT END OF pernr.
 WRITE : /1(169) sy-uline.
 SUM.
 FORMAT COLOR 3.
 WRITE:/1 sy-vline, 10 sy-vline,
 51 sy-vline, 77 sy-vline,
 82 sy-vline, 94 sy-vline,
 120 sy-vline,121(12) i_rep-abrtg,
 133 sy-vline,144 sy-vline,
 155 sy-vline, 156(13) lv_tot2,
 169 sy-vline.
 FORMAT COLOR OFF.
 WRITE : /1(169) sy-uline.
 CLEAR lv_tot2.
 ENDAT.
 ENDLOOP.
ENDIF.
ENDFORM. " display_qa_data
*& Form display_q_data
Display only the Quota Data
FORM display_q_data.
DATA: lv_flag. " New Flag
SORT i_2006 BY pernr ktart year.
IF i_2006[] IS INITIAL.
 MESSAGE i000 WITH 'No Data found'(014).
ELSE.
 LOOP AT i_2006.
Toggle Color
 PERFORM toggle_color.
 IF lv_flag <> space.
 NEW-LINE.
 ENDIF.
 AT NEW pernr.
 READ TABLE i_2006 INDEX sy-tabix.
 WRITE: /1 sy-vline, 2(8) i_2006-pernr,
 10 sy-vline,11(40) i_2006-ename.
 ENDAT.
 AT NEW ktart.
 READ TABLE i_2006 INDEX sy-tabix.
 WRITE: 1 sy-vline,10 sy-vline,
 51 sy-vline,52(25) i_2006-ktext.
 ENDAT.
 AT NEW year.
 READ TABLE i_2006 INDEX sy-tabix.
 WRITE: 1 sy-vline, 10 sy-vline,
 51 sy-vline,
 77 sy-vline,78(4) i_2006-year,
 82 sy-vline,83(11) i_2006-anzhl,
 94 sy-vline,95(13) i_2006-anzhb,
 108 sy-vline.
 NEW-LINE.
 ENDAT.
 AT END OF pernr.
 WRITE : /1(108) sy-uline.
 SUM.
 FORMAT COLOR 3.
 WRITE: /1 sy-vline, 10 sy-vline,
 51 sy-vline,
 77 sy-vline, 82 sy-vline,
 94 sy-vline, 95(13) i_2006-anzhb,
 108 sy-vline.
 FORMAT COLOR OFF.
 WRITE : /1(108) sy-uline.
 ENDAT.
 ENDLOOP.
ENDIF.
ENDFORM. " display_q_data
*& Form display_a_data
Display Only the Absence Quota
FORM display_a_data.
DATA: lv_flag. " New Flag
SORT i_2001 BY pernr awart.
IF i_2001[] IS INITIAL.
 MESSAGE i000 WITH 'No Data found'(014).
ELSE.
 LOOP AT i_2001.
Toggle Color
 PERFORM toggle_color.
 IF lv_flag <> space.
 NEW-LINE.
 ENDIF.
 AT NEW pernr.
 READ TABLE i_2001 INDEX sy-tabix.
 WRITE: /1 sy-vline, 2(10) i_2001-pernr,
 10 sy-vline,11(40) i_2001-ename.
 ENDAT.
 WRITE: 1 sy-vline, 10 sy-vline,
 51 sy-vline,52(25) i_2001-atext,
 77 sy-vline,78(12) i_2001-abrtg,
 90 sy-vline,91(10) i_2001-begda,
 101 sy-vline,102(10) i_2001-endda,
 112 sy-vline.
 NEW-LINE.
 AT END OF pernr.
 WRITE : /1(112) sy-uline.
 SUM.
 FORMAT COLOR 3.
 WRITE: /1 sy-vline, 10 sy-vline,
 51 sy-vline,
 77 sy-vline,78(12) i_2001-abrtg,
 90 sy-vline,101 sy-vline,
 112 sy-vline.
 FORMAT COLOR OFF.
 WRITE : /1(112) sy-uline.
 ENDAT.
 ENDLOOP.
ENDIF.
ENDFORM. " display_a_data
*& Form header
Write the Report Header
FORM header .
data : lv_pers type pbtxt,
 lv_orgn type orgtx.
gv_title1 = sy-title. " Set List Header
IF p_qa = c_x.
 NEW-PAGE LINE-SIZE 193.
ELSEIF p_a = c_x.
 NEW-PAGE LINE-SIZE 125.
ELSEIF p_q = c_x.
 NEW-PAGE LINE-SIZE 119.
ENDIF.
Standard header
FORMAT RESET.
CALL FUNCTION 'Z_STANDARD_HEADER'
 EXPORTING
 title1 = gv_title1.
Get the Personal Area and Org.Unit Texts
clear : lv_pers,lv_orgn.
select single name1 into lv_pers
 from t500p where persa = pnpwerks-low.
select single orgtx into lv_orgn
 from t527x where sprsl = sy-langu and
 orgeh = pnporgeh-low and
 endda = c_endda.
if not lv_pers is initial.
 write : /2 'Personal Area:'(017), 17(25) lv_pers color 7.
endif.
if not lv_orgn is initial.
 write : /2 'Organization Unit:'(021), 20(25) lv_orgn color 3.
endif.
IF p_qa = c_x.
 FORMAT COLOR COL_HEADING.
 WRITE : /1(169) sy-uline.
 WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
 10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
 51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
 77 sy-vline,78(4) 'Year'(027),
 82 sy-vline,83(11) 'Entitlement'(019),
 94 sy-vline,95(25) 'Absence Description'(022) CENTERED,
 120 sy-vline,121(12) 'Absence days'(023),
 133 sy-vline,134(10) 'From Date'(024),
 144 sy-vline,145(10) 'To Date'(025),
 155 sy-vline,156(13) 'Quota Balance'(020),
 169 sy-vline.
 WRITE : /1(169) sy-uline.
ELSEIF p_q = c_x.
 FORMAT COLOR COL_HEADING.
 WRITE : /1(108) sy-uline.
 WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
 10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
 51 sy-vline,52(25) 'Quota Description'(018) CENTERED,
 77 sy-vline,78(4) 'Year'(027),
 82 sy-vline,83(11) 'Entitlement'(019),
 94 sy-vline,95(13) 'Quota Balance'(020),
 108 sy-vline.
 WRITE : /1(108) sy-uline.
ELSEIF p_a = c_x.
 FORMAT COLOR COL_HEADING.
 WRITE : /1(112) sy-uline.
 WRITE:/1 sy-vline,2(8) 'Emp.No'(015) CENTERED,
 10 sy-vline,11(40) 'Employee Name'(016) CENTERED,
 51 sy-vline,52(25) 'Absence Description'(022) CENTERED,
 77 sy-vline,78(12) 'Absence days'(023),
 90 sy-vline,91(10) 'From Date'(024),
 101 sy-vline,102(10) 'To Date'(025),
 112 sy-vline.
 WRITE : /1(112) sy-uline.
ENDIF.
ENDFORM. " header
*& Form toggle_color
This routine alters the color of the records in the list
FORM toggle_color.
IF gv_dial = space.
 FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
 gv_dial = c_x.
ELSE.
 FORMAT COLOR 1 INTENSIFIED OFF.
 CLEAR gv_dial.
ENDIF.
ENDFORM. " toggle_color
*& Form get_2001
Get the ABsence type for each Quota type
FORM get_2001 USING p_pernr TYPE persno
 p_value TYPE awart
 p_year.
LOOP AT i_2001 WHERE pernr = p_pernr AND
 awart = p_value AND
 endda+0(4) = p_year.
 i_rep-awart = i_2001-awart.
 i_rep-abrtg = i_2001-abrtg.
 i_rep-atext = i_2001-atext.
 i_rep-begda = i_2001-begda.
 i_rep-endda = i_2001-endda.
 APPEND i_rep.
ENDLOOP.
ENDFORM. " get_2001

Reward points for useful Answers
Regards
Anji

URGENT - need to compress a file for the web

I need to do something IMMEDIATELY that I've never done before, and I simply don't have time to read the manuals to tell me how to do this.
I have a 2 and a half minute video segment in FCP that I need to export for use on a web site. The main objective is to make this a smaller file size so it won't take up too much band width. We can sacrifice quality in order to make this a smaller file size.
Do I Export by using Compressor? What settings do I use?
We're in the middle of an intense political battle and I need to get this on our web site today. Please help!
Bryce Inman

We're in the middle of an intense political battle and I need to get this on our web site today. Please help!< </div>
Consider hiring a consultant?
right under the EXPORT command, you will find Quicktime Conversion.
Use that and select Sorenson (or Sorenson 3). Leave all the defaults set as they are.
Once you've finished that and mounted it on your site, you can go back and try other settings. But I think you will understand very soon why your question cannot be answered easily. There are literally thousands of combinations of settings that will affect the quality of your movie and the viewing experience of your visitors. There are no easy solutions for downloadable or hinted movies except to hire an expert.
bogiesan

Need sample code in webdynpro for java

Hi all
actually i have one webdynpro form which is having multiple input elements. for example name,address,phoneno,price quantity and amount. and there is update button for that form.
when i click the update button the multiplication of quantity and price value will be updated by in one input field which is part of the another webdynpro form is part of the same view.
i want to update the input field in another form only when i change the value of either price or quantity otherwise the value of inputfield in another form should be same.
now how do we retrieve the event of either price or quantity inputfield which only changes rather than changes of name or adreess.
only when i modify the value of price or quantity in form and updated button then only the multiplication will be reflected in inputfield of another form.i dont want to reflect that inputfield of another form when i changes of other inputfields except price or quantity.
please provide the sample code on the same...especially how to retrieve the event of that price or quantity in a form..
Regards
Suresh babu

Hi Suresh,
please post your issue to the Web Dynpro forum.
Greetings,
Carsten

Help! Need Abap code in Bex for Customer Exit

Hi,
I am new to abap, i need help in creating variable type customer exit.
i want to create a variable type customer exit the reqmnt is to create a variable that will derive quarter(0CALQUARTER) from FINANCIAL_CLOSING variable.
Really appreciate if one can provide me the coding for this logic.
Thanks.

Hi Yaser,
Check this below.
http://scn.sap.com/thread/278890
Regards.

In urgent need of a clear casing for 17" MBP

Hi,
After browsing the net for a while i found nothing useful so i turn here...
I have a 17" MacBook Pro (no unibody) and i need a very slim hard plastic casing i can click around it and found a few for 15" MBP's but nothing for 17".
I am about to travel soon and last time at the airport they made me take out the mac (also out of the sleeve) and scratched it up pretty bad while it went through the scanner banging around in a plastic tray :/
If anyone can suggest a brand that would be appreciated.
Thanks alot!
Jay
(I know this is probably not the right place to ask but i need it asap)

This is the actual product website. I don't know if they ship to holland. Good Luck
http://www.speckproducts.com/products/bydevice?deviceid=70

Need source code or help for COMM_FAILURE 209

Hi,
Anyone know where I can get the source code for the com.sun.jndi.cosnaming package? I'm trying to debug this message WARNING: "IOP00410209: (COMM_FAILURE) Connection rebind". Only get this problem when connecting to solaris, fine on windows.
We run tnameserv and jdk1.4.2 on both. Also tried using jacorb, get same problem. The ORB's don't return any errors, error only on client side. Client is also jdk1.4.2 running on windows.
Ted.

Sorry,
but nobody here will do your homework for you. If you have problems with your code let us know and we try to help, but never ask for source code.
Phil

Error "No batch input data for screen" in BDC for Tcode CN22

Hi,
The issue is When teh BDC code is run by Functional guys we are facing the error as "No batch input data for screen SAPLCONW 1100", when I am trying teh change the Network Activity Level User field in Tcode CN22. When I execute the same BDC code with Developer User id, it is executing perfectly.
I have checked the User Profiles for both functional and Technical and both are same. What is my solution now?
Regards,
Deepthi.

Hi
Take Recording using the functional guy log in there might be user depended screen sequence
Regards
Nilesh Gaikwad
Edited by: Nilesh Gaikwad on Jan 26, 2010 10:49 AM

URGENT : Need java code snippet to retrieve uniquemember values OID 11g API

Hi All,
We have a requirement to retrieve the uniquemember attribute values using OID 11g API. We are using labeleduri approach for dynamic groups and thus all the uniquemember values are created using dynamic groups.
When we are trying to retrieve the uniquemember values using Java code snippet, it is not returning the values. The strange thing is: The uniquemember values created using dynamic groups are not visible in ODSM OID console or JExplorer tool. However those values are visible in LDAP Browser v2.8.1 tool.
So can somebody throw light on this? Any pointers or sample code snippet to retrieve uniquemember values would be grateful.
Thanks
Mahendra.

Hi All,
We have a requirement to retrieve the uniquemember attribute values using OID 11g API. We are using labeleduri approach for dynamic groups and thus all the uniquemember values are created using dynamic groups.
When we are trying to retrieve the uniquemember values using Java code snippet, it is not returning the values. The strange thing is: The uniquemember values created using dynamic groups are not visible in ODSM OID console or JExplorer tool. However those values are visible in LDAP Browser v2.8.1 tool.
So can somebody throw light on this? Any pointers or sample code snippet to retrieve uniquemember values would be grateful.
Thanks
Mahendra.

Need help on BDC for MB1A transaction.

Hello Abapers,
I need to create a BDC for t-code MB1A to do the Goods Issue with reference to reservation.
I am not able to use the BAPI 'BAPI_GOODSMVT_CREATE' to do the goods issue as there are some additional functionalities (Stock Determination) to be included.
The problem I am facing is, The stock determination will determine the Quantity, Storage Location and Valuation type for every item of the reservation. The quantity will be picked up from multiple storage locations and as a result the line item of reservation will be split into two or more for Goods Issue.
When this happens, If the reservation is having multiple line items, tracking the next item becomes a problem.
Please suggest a way to approach this problem.
Usefull answers will be rewarded.
Thanks in Advance,
Vinutha.

Hi
The COMMIT before and after CALL TRANSACTION is useless, The transaction FB01 calls the commit by itself, so u need only:
CALL TRANSACTION 'FB01' USING BDC_TAB
                                               MODE 'N'
                                               UPDATE 'S'
                                               MESSAGE ITAB.
Now ITAB is like structure BDCMSGCOLL, so after CALL Transaction u can use message statament in order to show a popup with message:
CALL TRANSACTION 'FB01' USING BDC_TAB
                                               MODE 'N'
                                               UPDATE 'S'
                                               MESSAGE ITAB.
LOOP AT ITAB.
MESSAGE ID ITAB-MSGID TYPE 'I' NUMBER ITAB-MSGNR
         WITH ITAB-MSGV1 ITAB-MSGV2 ITAB-MSGV3 ITAB-MSGV4.
ENDLOOP.
Max

BDC for ME01.

Hi All,
I need to write a BDC for Source list(ME01). Could anzbody suggest me how to do this.
It should be definetely contain the field AUTET.
Thanks.
Pls explain more elaborately.

Hi Shekar,
Hi,
See the sample attached code for ME51 using table control.
similarly record the same for ME01 and copy the TC logic from this.
REPORT zmm_pr_upload_mat
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
lpein(001), " Category of Del Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
Item Details
matnr(018), " Material No
menge(017), " Quantity
badat(010),
frgdt(010),
preis(014), " Valuation Price
waers(005), " Currency
peinh(005),
wepos(001),
repos(001),
sakto(010), " GL Account
kostl(010), " Cost Center
bnfpo(005),
END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
sno(3), " SNo
matnr(018), " Material No
menge(017), " Quantity
preis(014), " Valuation Price
sakto(010), " GL Account
kostl(010), " Cost Center
END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
v_rowno(5), " Row No
v_2(2), " Counter
v_rows LIKE sy-srows, " Rows in TC
v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_pr
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
MOVE-CORRESPONDING i_pr TO it_item.
APPEND it_item.
CLEAR it_item.
AT END OF sno.
READ TABLE i_pr INDEX sy-tabix.
MOVE-CORRESPONDING i_pr TO it_header.
APPEND it_header.
CLEAR it_header.
ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-BEDNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-BSART'
it_header-bsart.
PERFORM bdc_field USING 'RM06B-EPSTP'
it_header-epstp.
PERFORM bdc_field USING 'EBAN-KNTTP'
it_header-knttp.
PERFORM bdc_field USING 'RM06B-EEIND'
it_header-eeind.
PERFORM bdc_field USING 'RM06B-LPEIN'
it_header-lpein.
PERFORM bdc_field USING 'EBAN-WERKS'
it_header-werks.
PERFORM bdc_field USING 'EBAN-LGORT'
it_header-lgort.
PERFORM bdc_field USING 'EBAN-EKGRP'
it_header-ekgrp.
PERFORM bdc_field USING 'EBAN-MATKL'
it_header-matkl.
PERFORM bdc_field USING 'EBAN-BEDNR'
it_header-bednr.
PERFORM bdc_field USING 'EBAN-AFNAM'
it_header-afnam.
Item Details
v_l = 0.
To add no. of rows
v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
v_rowno = 130 .
LOOP AT it_item WHERE sno = it_header-sno.
v_l = v_l + 1.
IF v_l = 14 .
IF v_2 = 12 .
v_2 = 12 .
v_l = 2 .
From second time onwards it is displaying 12 rows only
v_rowno = v_rowno + 120 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ELSE.
V_2 initialized to 12 for second screen purpose
v_2 = 12 .
v_l = 2 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno .
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
ENDIF.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CLEAR v_field.
CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-matnr.
CLEAR v_field.
CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-menge.
PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-PREIS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-PREIS'
it_item-preis.
PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBKN-SAKTO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'EBKN-SAKTO'
it_item-sakto.
Cost Center
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-KOSTL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-KOSTL'
it_item-kostl.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
Call The Transaction
PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.
reward if useful
Regards,
Jackie..

Urgently required Crystal Reports 2008 FixPack_03 for SAP B1 8.8

Dear All,
I Urgently need Crystal Reports 2008 FixPack_03 for SAP B1 8.8. It is unavailable on the following link:
Crystal Reports 2008 Reference [original link is broken]
I have also searched it but unable to find it. If anyone has this, kindly share it.

Hi Iqbal,
There is a service pack in the following link
https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88 [original link is broken]
There is a fix pack 03 included in the folder, I don't know if this is relevant.
Cheers

Urgent,need for code in bdc for co02

Similar Messages

Maybe you are looking for