Ok, when i try to sync my new ipod touch to my computer, it says unable to connect for unknown reasons, and as a benefit, it shows the songs as faded in the list and therefore unplayable. how do i fix this problem?

as stated in the title, i when i try to sync my new ipod touch to my computer it says its unable to connect due to unkown reasons. the music is listed on my touch as there, but faded (minus a selected few songs) and therefore are unplayable. i have no idea where to start, i figured downloading the newest itunes update, however, it no longer shows up when i start it up. confused.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- Try another cable and USB port
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:       
iOS: How to back up
- Restore to factory settings/new iOS device.
-  Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • ITunes Freezes when I try to sync my new iPod Touch

    I can't sync my new iPod with my iTunes library. I have posted in the iTunes forum, although my title says that I have solved the issue. It isn't, so I'm contemptlating reposting.
    I bought a 64gig iPod Touch the other day to replace an old broken iPod. When I try to sync it with my main iTunes library, after a short while (5-500 songs) iTunes freezes and won't shut down. I have on a couple of occasions got a message saying the the computer can't write to the iPod, or the iPod isn't responding, or an "Unknown Error".
    It seems to work fine with my laptop.
    I found a page on fixing "Unknown Errors" and have tried most of the suggestions.
    I've tried:
    *) Uninstalling and Reinstalling iTunes several times
    *) Resetting and restoring my iPod several times
    *) Updating my drivers - they are all up to date apparently
    *) Stopping all unnecessary programs and services from running on start up
    *) Creating a new user account and trying to sync my iPod from there. I have successfully managed to sync the iPod with a small number of songs or a film on my own account, so I need to test it with a fairly big library. I copied my main iTunes library into iTunes on the new account. The sync hasn't worked (although it is syncing the same files).
    I found a post with a google search that suggested it could be a power drain on my USB port / Bus, or somet fhing like that. Not sure exactly what that means, but it sounded plausible. I have recently upgraded my graphics card.
    I did also see a solution posted that suggested formatting the iPod using My Computer and the iPod icon, but I can't imagine that would do anything more than the restore iPod option in the iPod menu?
    Can anyone help? Getting a bit fed up now... I've had the iPod a couple of weeks and have barely been able to use it yet.

    Are you using security software on your PC? If yes, try to disable the software or check the settings. More info here: http://support.apple.com/kb/TS3125

  • When i try to sync my old ipod touch. it says theres a error. so i update it and reset it and stuff but it still doesnt work. what should i do?

    When i try to sync my old ipod touch. it says theres a error. so i update it and reset it and stuff but it still doesnt work. what should i do?

    Before you restore the iPod from the backup that Dave had you make yu have to transfer stuff from the iPod to the computer since the backup does not contain the apps themselfes, music, synced phots and some other stuff.  To see what a backup contains see:
    http://support.apple.com/kb/HT4946
    To transfer iTunes purchases:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - For other stuff you need a third-party program like one of those discussed here:
    Copy music from Ipod to new computer...: Apple Support CommunitiesA lot of thos are paid, especiall for more than a limited number of items.  It is harder to find one that does synced photos.

  • I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign.  How can I fix this problem?

    I have installed the font Broadway on my computer and it works in Microsoft Word but does not appear in the font list in InDesign.  How can I fix this problem?

    Start by rebooting the computer. If that doesn't work, search for adobefnt*.lst and delete all instances where * becomes a 2-digit number.

  • I'm using Photoshop CC 2014, when I open a picture and movie it to a different Photoshop page, the picture turns black and white. How do I fix this problem?

    I'm using Photoshop CC 2014, when I open a picture and movie it to a different Photoshop page, the picture turns black and white. How do I fix this problem?

    Nobody can tell you anything without proper system info or other technical details since even your terminology is confusing. there are no "pages" in Photoshop. What you describe in vague terms could be anything from your target document having a different color mode/ color profile to some hardware acceleration issue, but we really can't make any sense of it based on your information.
    Mylenium

  • HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Could it be because the SIM card got damaged while I cut it to fit the IPhone?
    Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
    Or somehow the Chinese carrier found out and locked it?
    No, which is not possible.
    What can I do? Get a new SIM and see if it works again?
    Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

  • Hi, I upgraded my iphone 4 to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tels that this device is not registered as part of the iphone developer programme. How could I fix this problem? Please..?

    Hi, I upgraded my iphone 4 (4.3.3) to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tells that "this device is not registered as part of the iphone developer programme." How could I fix this problem? Please help me...,

    I had a similar occurrence with my just activated iPhone 4.
    I had been using the phone for three days when an odd occurrence with voice mail caused me to call tech support. After some discussion they decided to push the activation to my phone (even though I had been using it for three days). When I went to power it back up again I repeatedly got the "no service" notification. I got tech support on a land line and we tried hard reboots and so on. No joy. They told me to take it in to the point of sale and either the SIM card or the phone needed (or both) needed replacing.
    I tried one last hard reboot after dinner and the phone came up with service, but I took it in to the point of sale in the morning and they swapped the SIM card out and I went to a Genius Bar appointment to get the phone checked out. It is supposedly OK, but I am still having some problems when syncing it so I will have to visit the Genius Bar again tomorrow about that. At least I have not experienced the "no service" problem in the roughly 24 hours since the SIM card was replaced. (Fingers crossed)

  • When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

    When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

    Hi
    Try in iDVD
    • Save as a DiskImage
    • Play this by use of DVD-player tool
    Still OK or problems ?
    If OK - Burn it by use of
    • Apple Disk Util tool - or -
    • Roxio Toast™ (if You got this - I love it)
    Yours Bengt W

  • On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??

    On a MAC G4, WITH OS 10.5.8, I DOWNLOADED 3.6.8, BUT I CANNOT INSTALL IT. IT SAYS I DO NOT HAVE SUFFICENT PRIVILEGES. WELL, IT'S MY COMPUTER AND I AM THE ADMINISTRATOR ON IT. HOW DO I FIX THIS PROBLEM SO I CAN INSTALL FIREFOX 3.6.8??
    == I DOWNLOADED UPDATE 3.6.8

    Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...

  • HT3669 I am using a new Brother printer/scanner.  I have scanned once but now it is giving the message "printer offline".  how do I fix this problem

    I am using a new Brother printer/scanner.  I have scanned once but now it is giving the message "printer offline".  how do I fix this problem?

    You need to contact Apple Support to deactivate iMessage. https://www.apple.com/support/appleid/contact/

  • TS1814 My phone doesn't have enough GB to update directly and when I Go to ITunes an error window comes up to tell me make sure my network settings are correct and active? How do I fix this to upgrade my phone .

    My phone doesn't have enough GB to update directly and when I Go to ITunes an error window comes up to tell me make sure my network settings are correct and active? How do I fix this to upgrade my phone .
    <E-mail Edited by Host>

    Hi Diesel vdub,
    Did that and I tried again, download stops halfway through and comes up with same message I have already quoted. Wifi Signal is 5/5, network is working, just not letting me download via iTunes.

  • Using Mavericks Spelling and Grammar in Pages document causes Pages to freeze. Must Force Quit. Mavericks spell checker works OK in Text and Emails. How can I fix this problem?

    Using Mavericks' Spelling and Grammar in a Pages document causes Pages to freeze, Must Force Quit. How can I fix this problem?
    Mavericlks Spelling and Grammar works in Pages when used manually. And it works automatically in Text and email.

    Another autocorrect bug:
    I type a lot of lyrics, which tend to cotain words like ’cause and ’em instead of because and them.
    I've set up autocorrect instances to change a plain apostrophe with an ending, single curly quote for these words, but they are invariably changed to a beginning, single curly quote mark by Pages. The only way I can get the correct curly quote is to type over the wrong quote manually and hope that I don't have to edit the rest of the word again, as this would cause autocorrect to kick in again and change the quote to the wrong, beginning curly mark again.
    Does anyone know how to get around this tedious problem?

  • When I plug in my hdmi lightening connector I get an error message that states the firmware has to download and the hardware cannot be used until the download is complete. How do I fix this problem?

    When I plug my hdmi lightening converter into my iphone5 I get an error message that states " downloading accessory firmware. Your accessory will not function until download completes.  How can I fix this?

    Don't know what changed today but it downloaded and installed on the shuffle. So far so good.

  • My game posts for facebook have stopped posting since i upgraded to the newest version of firefox, how do i fix this

    I have tried clearing my cache but this hasnt made any difference. I haven't made any changes to my settings. The posts simply dont appear on my timeline or in my activity log. A few of my friends had the same problem and have had to downgrade to an older version of firefox but I am reluctant to do this. Any suggestions as to how I can resolve this problem?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • HT1688 I tried to update my iPhone 5 this morning with the new software update and now it won't turn on. When I plug into my itunes account, it says my phone is in recovery mode. Was working perfectly prior to the attempt to update. How do I fix this?

    I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?

    Zach Doody wrote:
    itunes says i cannot update the phone as it is in recovery mode.
    That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
    Restore it. You don't have a choice at this point.

Maybe you are looking for

  • N95 not seen by nokia products

    My problem is that no nokia software can see my phone I use winxp sp3 up to date neither my phone, nor my wife's one are seen by nsu or pc suite whereas windows sees them i've tried on different computer with the same conclusion with fw or wo, with a

  • How to get result of PING whether TRUE/FALSE and prompt message to user?

    Hi all!!!! In Forms 6i, I need to know how to get the result of a ping if the ping is sucessful or not. It should prompt the user whether the connectivity is there or not after the ping statement which is HOST('PING 191.10.10.40'). As of now, when th

  • Upgrade to patchset 3 10.1.2.3 from 10.1.2.0.2 causes Java errors

    Hi all, I upgraded our app server and then did the frmwebutil change as per the document, but now if i try and open any form, the form does not open, the system crashes and my java console contains the following error. Anyone any ideas? Exception in

  • Invoice approval report

    Hi, how to generate a list of invoice approvals that a particular individual has entered? Thanx Brgds, Ashok

  • Windows 2008 R2 SP1 BSOD Bug Check 0x0000003b

    Hi, I have a Win 2k8 R2 SP1 VM that keeps crashing every night for the past 2 days. Every time is the same bug check code 0x0000003b. I looked around and found 2 KBs for this specific code:  http://support.microsoft.com/kb/980932/en-gb - does not app