OLAP Database Deleted
Hi All,
The OLAP cube processing was running fine until today all of a sudden I faced a problem. The same OLAP database was showing as not built. Can I come to know how could this happen?
Also the following message is showing in the ULS logs:
"Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_CUBESTATUS_DeleteStatus). Execution Time=35490.602496"
Cheers, Amit Wairkar
Amit,
Is this issue related to 2013 or 2010?
Hrishi Deshpande Senior Consultant
Similar Messages
-
RMAN in 10g database deletes archivelog files before standby receives them
Hi all,
We currently have problem with our Oracle 10gR1 database on Windows 2000 server in that the RMAN backups on the primary database delete archivelogs before the standby database can receive current and new archivelogs from primary database. What happens is that RMAN backs up the archivelogs and deletes them from disk before the archivelogs are sent to the standby. The standby then looks for these archivelogs on the primary but is unable to locate them. Whenever this happens, the production database (primary) hangs and we have to restart the instance on the primary. We have our Data Guard setup in maximum performance mode so this should not happen.
As a short term fix, we have changed the backups to have RMAN backup and delete the archive logs 15 minutes older than current time so that the standby can receive the logs and not have problems. Besides this fix is there a long term solution to the problem or is it a bug in Oracle 10g? The issue came up after we upgraded from 9i to 10g and never saw it before in 9i with RMAN and Data Guard physical standby databases.
Thanks
Ben Prusinski, Oracle DBAthanks for answer...
did you managed to make it 'work'?
according to doc. if set on standby it should:
<>
Then, these files are eligible for deletion:
Archived redo log files in the flash recovery area that
were applied on the standby database.
<>
and this is to my understanding irespective to retention policy...unfortunately report obsolete does not report applied archived logs as eligable for deletion.
How this works in your case?
regards.
goran -
Project server 2013 olap database remains in processing state
Hi,
In an attempt to restore the Reporting Database in Project Server 2013, I did an archive and restore of Custom fields. Both of these events were successful, however, the Reporting database refresh kept on hanging in "Waiting to be processed status".
Before this was noticed, the OLAP Database was configured and a build was initiated. Now the status of the PWAOLAPDatabase build just remains in the "Processing..." status. What am I to do here? Thanks!Hi Jaco,
It seems like your reporting database refresh has failed, so the OLAP DB cannot be generated either. It could be due to a large resource pool.
See reference below:
http://social.technet.microsoft.com/Forums/projectserver/en-US/7ac3bb1b-6621-46f0-a6c5-d9a04f770418/reporting-database-refresh-project-server-2010?forum=projectserver2010general
http://blogs.msdn.com/b/brismith/archive/2011/07/14/project-server-2010-reporting-database-refresh-failing-with-large-resource-pools.aspx
Note also that you can click on "processing" (as per your screenshot) to have the OLAP DB creation log in order to have more information on the status.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
OLTP and OLAP databases on same SQL Server?
Would you put OLTP and OLAP databases on same SQL Server or separate?
I realize the ideal would be separate, but that means 2 expensive licenses instead of 1. Most of our OLTP stuff happens during the day while OLTP processing happens at night (so good use of resources) if just 1 server. Also, the disks that hold
the files could have different allocations (small chunks for the OLTP disks, large for the OLAP disks). Also, by being on the same database server, the OLTP data is immediately accessible for processing into the warehouse.
Or, is it just a cardinal rule to never mix the two worlds as server completely different purposes?
Thanks.Answer given in simillar below thread would help you for sure:
MSDN Forum:
Is keeping your OLAP and OLTP databases on the same server is considered bad practice?
-Vaibhav Chaudhari -
Restore of an application without having an OLAP database backup
Hello,
Could you tell me if there is a means (manually or through the server manager) to restore a working application-set if I have not a backup of the OLAP database ?
Thanks in advance,
LionelHi,
There is a way :
On the server hosting BPC Server Manager :
1. Create a new folder named "MyAppSet" where MyAppSet is the exact name of your appset.
2. Create 3 sub-folders, in the previous one, named WebFolder, FileDB and SQL
3. In \MyAppset\Webfolder put a zip file contening all the files and subdirectory of the appset webfolder
4. In \MyAppset\FileDB put a zip file contening all the files and subdirectory of the appset fileDB
5. in \MyAppSet\SQL put the .BAK file of your DB (full backup of your appset.
6. Run SAP BPC server manager => AppSet => Restore AppSet
7. Open \MyAppSet directory.. This will automatically find the correct filedb zip, webfolder zip and DB .BAK file
SSAS DB will be recreated but you will have to reprocess application / dimensions and security from the Admin client. -
Based on my cursory testing, the default delete operation for database adapter seems to use only the table key to identify the record to delete. Is there a delete counterpart of query by example so that I can specify field value other then just the key to match for deletion? I can use custom SQL with parameters for such delete. Or I can do a standard query first and feed the IDs to a standard delete. But I would like to know if anyone have other brilliant ideas. TIA
790072 wrote:
Hi Guru's
Just thought of asking for a experts tips on database delete.
we have few database's running on oracle 11g and we just want to get rid of these databases.
what could be the best procedure to delete the database.
Thanks in advance .
Hi,
To delete database you can use DBCA.
When DBCA deletes a database, it shuts down the database instance and then deletes all database files. On the Windows platform, it also deletes associated Windows services.
Cheers -
Litigation Hold, Single Item Recovery, & Mailbox Database Deleted Items Retention
Hello
I'm looking for a simple explanation of how the three features mentioned in the subject line interact and affect one another.
Specifically, I'm after the answer to the following question:
If a users mailbox has litigation hold enabled, and the mailbox database it lives on has a deleted items retention value of 365 days, does that users "Recoverable Items" get deleted after 365 days, or does litigation hold, as I supspect bypass the retention
value?
If Single Item Recovery is enabled for said user as well, and added to the scenario above - how does this affect the retention of the deleted items?
I cannot find a definitive article that describes mailbox database deleted items retention, litigation hold and single item recovery and their behaviours when used together.
Regards
Matt
MattHello again,
Just wanted to open this thread up again, and gain some further clarification, specifically on the behaviour of items in "Recoverable Items\ Deletions" folder.
In the following scenario how will items be processed:
-SingleItemRecoveryEnabled -True
-LitigationHoldEnabled - True
-UseDatabaseRetentionDefaults -True
-Items in the Deletions folder have passed the retention value date as specified on the database.
Given the parameters above, when the I run the Managed Folder Assistant against a mailbox, I'm expecting to see the items in the Deletions folder move, and be placed in Purges folder.
This is not happening however, items are only removed from the Deletions folder when LitigationHold is disabled. Then, items bypass the Purges folder altogether and are removed from the mailbox/database altogether.
I referred to the article below for clarification:
http://blogs.technet.com/b/exchange/archive/2009/09/25/3408389.aspx#_Short-Term_Preservation_of
"...the message was not purged from the mailbox store. Instead the message was moved from the Recoverable
Items\Deletions folder to the Recoverable Items\Purges folder. All store hard-deleted items end up in this folder when single item recovery is enabled. The Recoverable Items\Purges folder is not visible to the end user, meaning that they do not see data retained
in this folder in the Recover Deleted Items tool.
When the message deletion timestamp has exceeded the deleted item retention window, Records Management will purge the item."
Can anyone assist in explaining the behaviour I'm observing?
I'm in a transition period where by our organisation has been journalling all
email to an Online service since 2008 and this service will continue to be used solely as our archiving and compliance mechanism.
Since Exchange 2010 was adopted by the company around 18 months ago, the previous mail administrator had litigation hold enabled on all mailboxes
from the outset, so I'm in the position now where by I have two retention methods running side by side.
Long story short, the online archiving will be used moving forward and litigation hold will be disabled within Exchange.
What I want to do is transition from long term data
preservation inside Exchange, to short term preservation - hence the reason for now enabling SIR.
Currently I have mailboxes with 10's of GB's of mail sat in the "Recoverable Items\Deletions" folder, and very little, if anything in some
cases, in the respective "Purges" folder.....
Can anyone advise on a "correct" procedure for making this transition?
Regards
Matt
Matt -
Is that possible that Apex + OLAP database
Hi all,
Apex : 4.1
database: OLAP
I'm not sure whether I can develop apex application to query OLAP database or not.
Somebody can answer it?
Best Regards.if you Google the 2 files, you can find it
http://www.oracle.com/technetwork/testcontent/apex-olap-sql-102419.html
http://www.oracle.com/technetwork/testcontent/salestrack-workspace-sql-102457.html
regards
jean marc -
Other database delete is not working on forall statement
Dear all,
My scenario is , i create a program, the program fetch the data from database x and i want to delete on the same x database but i am running this program at y database, so
so i created a view
create or replace view vw_ibs_pda_bills_x as
SELECT *
FROM ibs_pda_bills_x@testarch1my program
Declare
CURSOR c2 IS
SELECT *
FROM vw_ibs_pda_bills_x
WHERE bill_month <= '31-dec-2008'; -- AND bpref_no = :cons;
opr varchar2(10) := 'DELETE';
TYPE tsch IS TABLE OF c2%ROWTYPE;
vtsch tsch;
cnt NUMBER := 0;
stime NUMBER;
etime NUMBER;
DURATION NUMBER;
rcount NUMBER;
errorsd PLS_INTEGER;
ecode NUMBER;
val1 VARCHAR2 (100);
val2 VARCHAR2 (100);
val3 VARCHAR2 (100);
val4 VARCHAR2 (100);
BEGIN
BEGIN
stime := DBMS_UTILITY.get_time ();
OPEN c2;
LOOP
FETCH c2
BULK COLLECT INTO vtsch LIMIT 1000;
IF vtsch.COUNT = 1000
THEN
cnt := cnt + 1;
END IF;
If opr = 'INSERT' Then
FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
INSERT INTO dlul.ibs_pda_bills
VALUES vtsch (i);
Else
FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
Delete from vw_ibs_pda_bills_x where bill_month = vtsch(i).bill_month;
End if;
EXIT WHEN c2%NOTFOUND;
END LOOP;
etime := DBMS_UTILITY.get_time ();
DURATION := ((etime - stime) / 100) / 60;
rcount :=
(cnt * 1000) + vtsch.COUNT - NVL (SQL%BULK_EXCEPTIONS.COUNT, 0);
If opr = 'INSERT' Then
INSERT INTO process_stage_log
VALUES (SYSDATE, 'IBS_PDA_BILLS', DURATION, rcount);
Else
INSERT INTO process_stage_log
VALUES (SYSDATE, 'IBS_PDA_BILLS-D', DURATION, rcount);
End if;
CLOSE c2;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
errorsd := SQL%BULK_EXCEPTIONS.COUNT;
IF errorsd > 0
THEN
FOR j IN 1 .. errorsd
LOOP
ecode := SQL%BULK_EXCEPTIONS (j).ERROR_CODE;
val1 :=
vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).sch_code;
val2 :=
vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bpref_no;
val3 :=
vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bill_month;
val4 :=
vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).service_code;
If opr = 'INSERT' Then
INSERT INTO process_error_log
VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'INSERT');
Else
INSERT INTO process_error_log
VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'DELETE');
End if;
END LOOP;
END IF;
END;
END pda_insert;the program want to do the delet option for all delete is not working. The program executed successful but the operation delete is not happening
how to solve this issue.
please help me
kanishNo error encountered in my log table
the new workaround you said, that is instead of for all , already i tried for i in 1.. to like
instead of forall delete i tried the following way
Declare
CURSOR c2 IS
SELECT *
FROM ibs_pda_bills_x@testarch1
WHERE bill_month <= '31-dec-2008'; -- AND bpref_no = :cons;
opr varchar2(10) := 'DELETE';
TYPE tsch IS TABLE OF c2%ROWTYPE;
vtsch tsch;
cnt NUMBER := 0;
stime NUMBER;
etime NUMBER;
DURATION NUMBER;
rcount NUMBER;
errorsd PLS_INTEGER;
ecode NUMBER;
val1 VARCHAR2 (100);
val2 VARCHAR2 (100);
val3 VARCHAR2 (100);
val4 VARCHAR2 (100);
BEGIN
BEGIN
stime := DBMS_UTILITY.get_time ();
OPEN c2;
LOOP
FETCH c2
BULK COLLECT INTO vtsch LIMIT 1000;
IF vtsch.COUNT = 1000
THEN
cnt := cnt + 1;
END IF;
If opr = 'INSERT' Then
FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
INSERT INTO dlul.ibs_pda_bills
VALUES vtsch (i);
Else
/* fORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
Delete from vw_ibs_pda_bills_x where to_char(bill_month,'dd-mm-rrrr') = to_char(vtsch (i).bill_month,'dd-mm-rrrr');*/
for i in 1..vtsch.count loop
delete ibs_pda_bills_x@testarch1 where to_char(bill_month,'dd-mm-rrrr') = to_char(vtsch (i).bill_month,'dd-mm-rrrr');
end loop;
End if;
EXIT WHEN c2%NOTFOUND;
END LOOP;
etime := DBMS_UTILITY.get_time ();
DURATION := ((etime - stime) / 100) / 60;
rcount :=
(cnt * 1000) + vtsch.COUNT - NVL (SQL%BULK_EXCEPTIONS.COUNT, 0);
If opr = 'INSERT' Then
INSERT INTO process_stage_log
VALUES (SYSDATE, 'IBS_PDA_BILLS', DURATION, rcount);
Else
INSERT INTO process_stage_log
VALUES (SYSDATE, 'IBS_PDA_BILLS-D', DURATION, rcount);
End if;
CLOSE c2;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
errorsd := SQL%BULK_EXCEPTIONS.COUNT;
IF errorsd > 0
THEN
FOR j IN 1 .. errorsd
LOOP
ecode := SQL%BULK_EXCEPTIONS (j).ERROR_CODE;
val1 :=
vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).sch_code;
val2 :=
vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bpref_no;
val3 :=
vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bill_month;
val4 :=
vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).service_code;
If opr = 'INSERT' Then
INSERT INTO process_error_log
VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'INSERT');
Else
INSERT INTO process_error_log
VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'DELETE');
End if;
END LOOP;
END IF;
END;
END pda_insert;i am receiving the following error
ORA-02055: distributed update operation failed; rollback required
ORA-06531: Reference to uninitialized collection
ORA-06512: at line 77
ORA-06531: Reference to uninitialized collection
kanish -
how do i make it so that when i do a DELETE query to delete a entry in database so it doesnt say #DELETED# in the database?
NEVER MIND!!GOT IT
-
Database: Deleting multiple records
I have a database with a lot of records in it. I want to delete all the records but the ones that match a find request so I can reuse this database for new data without having to recreate it. I do not see in the manual how to delete a large number of records at once. Thanks.
Hello
Organize > Show All Records
apply your request
Select All
Organize > Hide Selected
Select All
Edit > Delete Record
Organize > Show All Records
I know, the menu item title is not clear enough
It would have been better if it was "Delete Record(s)"
Yvan KOENIG (from FRANCE dimanche 24 septembre 2006 18:44:53) -
DFM database delete for one device
Hello,
I want to delete DFM database for one of devices in LMS 4.2. Or just delete and add that device in DFM (if possible in lms 4.2, in 3.2 it was posssible).
Regards,
MladenAs DFM depends of SNMP output from the device to show all this info, before we claim it corrupt, lets check directly for the interface details.
For this show the CLI output of the device:
show run interface <int_name>
show snmp mib ifmib ifindex <int_name>
Example if it is Ethernet2/1
show run int Ethernet2/1
show snmp mib ifmib ifindex Ethernet2/1
The output would be similar to :
Router# show snmp mib ifmib ifindex Ethernet2/1
Ethernet2/1: Ifindex = 3
Do a snmpwalk on the following OIDs with the ifIndex number :
ifTable (1.3.6.1.2.1.2.2)
ifXTable (1.3.6.1.2.1.31.1.1)
Example :
snmpwallk -v2c -c public 10.10.10.10 ifTable.3
Please share the output for me to check more.
Also, for the device, to remove the entire details, we have no option left than to delete it from DCR and add it back after a short while.
-Thanks
Vinod
**Encourage Contributors. RATE them. ** -
Database Deleted that had all the Arbitration Mailboxes, AD accounts still exist.
So in doing a little house cleaning on Exchange 2010 in a new environment I'm noticing that the Arbitration Mailboxes do not exist but the accounts exist in AD.
I ran the below command and got that output.
Get-Mailbox -Arbitration | Ft Name, Database
Name
Database
SystemMailbox{1f05a927-7ba6-4008-81eb-7c42e5be81f5} Old-Database
SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9} Old-Database
FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 Old-Database
"Old-Database" does not exist in my DAG nor do any of the associated files are listed in any of the Exchange Volumes. In AD Users I see all three AD accounts. I've tried to move requests, knowing of course that a mailbox doesn't exist
so might not work but just giving it a try, and of course it failed. I've tried to enable the mailbox for the account, which I think would be the closest solution but I think it is trying to recreate the account in the old database that doesn't exist.
So I guess what I'm trying to do is enable all the mailboxes but have it recreated in a different database.
Unless my thought process is entirely wrong I'm was hoping for assistance with next steps or the powershell command to accomplish what I'm doing. I did read this in another post though and to run this command. I'm hesitant as the poster seemed
hesitant initially.
Set-Mailbox -Arbitration -Database <DatabaseID>
https://social.technet.microsoft.com/forums/exchange/en-US/c1aec19d-f101-4c5a-b086-c7cc3e86b2f9/deleted-database-that-was-housing-arbitration-mailboxesHi There,
I used the link below to re created them after we lost a DB that contained them.
http://social.technet.microsoft.com/wiki/contents/articles/5317.recreate-and-enable-missing-arbitration-user-accounts-and-mailboxes-in-exchange-server-2010.aspx
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization -
Drop database deletes the alert log
Hi DBA's ,
I ran into a strange situation i never faced before.
We have a Oracle database version 11.2.0.3.0.
This is dev db which i had to refresh from production via rman.
After the drop database command finished all the contents of my trace folder dissapered including the alert log.
Has anyone faced this situation before or help me understand what happenedhimmy, if you are dropping the database why would you need the old alert.log or any other diagnostic directory files? Ideally if you drop a database there should be no record of it left on the system when the drop completes. Why is this a problem?
If you are refreshing the database from production then instead of dropping the database and creating a new database via rman restore perhaps you should be using either the export/import transportable tablespace feature to move the files or traditional export/import of the data.
HTH -- Mark D Powell -- -
Aperture repair database deleted all files
Hi Everyone!
I was trying to open an old Aperture database that I haven't used in a while, so Aperture told me it would need to update the Library. When it proceeded, however, it told me that it couldn't open the .aplibrary, so I opened it with cmd+alt pressed, selected Repair permissions, and then, Repair database. That's when the fit hit the shan: Aperture opened something right away, and it's a library with the correct name - although completely empty. No pictures, no folders, no projects, nothing.
I immediately freaked out and closed Aperture, and took a look at the library file: it shrunk from some 60GB to 800MB. Looking inside, there are no more masters anymore. The free space on the hard drive, however, remains about the same, so it appears that the data itself is still there.
Unfortunately, I do not have a backup of that old library (I'm still beating myself up about that!), so here's my question: what to do next? Is it possible that Aperture replaced the old library folder with the new, empty one, and hid the old one somewhere in the file system?
Any help is greatly appreciated!
DorianMy similar horror story had a good ending after all, and maybe this will help someone else.
I connected my iphone to the MacBookPro and fired up Aperture to import photos.
Aperture said it needed to upgrade the database, and I said fine.
It said there was an error and I would need to hold Option + Command and restart Aperture, and do the "Repair Database" option.
I did.
Aperture then opened to a brand new, empty Aperture library. All projects gone, and all images gone.
I searched, came here, tried everything, to no avail.
At this point I called Apple. They graciously initiated 90 days of complimentary support for Aperture, and helped me.
While I could not locate a single Aperture library on my harddrive using the Finder method, combined with a "show hidden files" option... the Apple support agent guided me to search for them using Aperture itself:
In Aperture: File > Switch to Library > Other/New
We found that my old library had apparently been moved (no doubt by me, during an accidental drag and drop) into a subfolder of my Pictures folder. That was the reason why, when Aperture was being started, the lack of a library in the usual location (root of the Pictures folder) caused it to create a new one, which was, of course, blank.
The above step (in Aperture: File > Switch to Library > Other/New) not only revealed the other library that contained all the old files, but it also revealed the location of it (scan near the bottom of the dialog box).
He had me open it to verify all the pics were still there.
All I had to do was close Aperture, then drag and drop it from the subfolder back to the root folder (Pictures) and I was back in business.
It does not sound like your situation is the same as mine, but this is something to consider.
Maybe you are looking for
-
How can i display page number in this format in xml publisher report (1-1)
in this format 1-1 1-2 1-3 2-1 2-2 2-3 can i display page nos in this format in xml publisher please help me on this
-
How do I change the main iCloud account on my iPhone?
How do I change the main iCloud account on my iPhone?
-
Resizing of main Mac partition taking a while
Hi, Recently, I removed the 450 GB partition I had for Windows 8 (Boot Camp) in order to get a full terrabyte of space on my main OSX/iMac partition. It's the only partition that's left on the hard drive. I selected the hard drive via Disk Utility, w
-
HT1657 What can I do if my rented movie doesn't play and only shows a black screen?
I just rented a movie and even though it completely finished downloading it will not play properly. No sound and no picture, just a blank, black screen. thanks for any help.
-
Which Airplay speakers are reliable?
I have two Bose SoundLink Air speakers. Often AirPlay can connect, sometimes not. And when not, it's the same for iTunes and for iOS: a long wait and then nothing. I also have a Denon AVR-X4000. Same story. Chance of successful connection is about 4