Old db2 tablespace names in HR SP22 error log
Hi all,
We are applying HR support packages on a test box. This test instance is a copy of our production ERP instance. The copy was done using a backup/restore off the PRD database.
We get an error when applying SAPKE60020 because it is trying to create a table in a tablespace that does not exist. The tablespaces it is trying to access are of the pattern PRD#STABD, PRD#POOLD etc. PRD is copied to TST.
I have updated tables TADB6, TSDB6 and IADB6 and changed PRD to TST for all tablespaces. At the OS level if I run a "db2 list tablespaces" all the names show up as TST#<tablespacename>.
I am not sure why it is trying to access PRD#<tablespace>. Is there someplace else I need to make a change from the old name?
Thanks,
Kevin
Hi Kevin,
no I am running out of ideas. As Dirk mentioned the tablespace names are only maintained in tables TADB6, IADB6 and TSDB6. The SAP DDIC assembles CREATE TABLE statements for new tables using those table entries.
If you have changed all entries with the old SID in these tables and if you haven made sure that no old entries are buffered in the SAP table buffers ( $SYNC )
, the SAP DDIC should not generate CREATE TABLE statements for new tables containing the old tablespace names any more.
For existing tables that need to be converted the SAP DDIC reads out the current tablespace location from SYSCAT.TABLES and stores them into table DDSTORAGE before the table is dropped. For recreating the tables the DDIC then uses the DDSTORAGE entries. If no DDSTORAGE entries exist DDIC again falls back to TADB6, IADB6 and TSDB6.
If no table conversion is running table DDSTORAGE is usually empty.
Regards
Frank
Similar Messages
-
Awrrpt gives wrong tablespace names (old names of renamed tablespaces)
Hi all,
I found a strange thing running some awr reports:
I'm running a 10.2.0.1.0 db on a 32 bit Win cluster.
I rebuilt some tablespaces to switch to automatic extents management, and I renamed tablespaces to a new name. Everything works fine, but awrrpt shows the wrong (old) names.
Basically, here's what I did:
--create new tablespaces
CREATE TABLESPACE TS1_NEW ...
CREATE TABLESPACE TS2_NEW ...
--move tables from TS1 to TS1_NEW
ALTER TABLE T MOVE TABLESPACE TS1_NEW...
--move indexes from TS1 to TS1_NEW
ALTER INDEX I REBUILD TABLESPACE TS2_NEW...
--restore default names
DROP TABLESPACE TS1...
DROP TABLESPACE TS2...
ALTER TABLESPACE TS1_NEW RENAME TO TS1
ALTER TABLESPACE TS2_NEW RENAME TO TS2
now, dba_tablespaces and v$tablespace show the right names ( TS1 and TS2 ), but if I run awrrpt.sql and look at the section "IO Stats"."Tablespace IO Stats" I found statistics for tablespaces TS1_NEW and TS2_NEW, and I don't find anything for tablespaces TS! and TS2!
Obviously the time interval of the report is not the problem: I finished to build the new tablespaces at 7pm of 13th december and I run the awrrpt between 14-Dec-07 13:01:03 and 14-Dec-07 14:00:20... and the database has also been restarted many times (to try failover / failback) after the drop and rename operations.
So my question is: where does awrrpt find the (wrong) names of the tablespaces?
Am I going into troubles?
Thanks for any answer,
andreaCheck out Metalink Note:343795.1, does it apply?No: I got no errors in alert.log and statistics made by awrrpt looks corrrect (or at least reasonable).
I only got the wrong (old) tablespace name. -
While dropping the old undo tablespace we get an error
Hello friends ,
i Cannot drop old undo tablespace. While dropping the old undo tablespace we get an error
ERROR at line 1:
ORA-01548: active rollback segment '_SYSSMU77$' found, terminate dropping
tablespace
SQL> select tablespace_name, status, segment_name from dba_rollback_segs where status != 'OFFLINE';
TABLESPACE_NAME STATUS SEGMENT_NAME
SYSTEM ONLINE SYSTEM
APPS_UNDO NEEDS RECOVERY _SYSSMU77$
Please help
Thanks
Edited by: Vicky C on Dec 23, 2012 9:23 AMHi peter
We not using rman backup only cold backup.. i tried using cold backup in ramn block media recovery but that recovery needs archive log
RMAN> BLOCKRECOVER DATAFILE 158 BLOCK 48829;
Starting blockrecover at 18-DEC-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=437 devtype=DISK
channel ORA_DISK_1: restoring block(s) from datafile copy /var/undo/undo02.dbf
starting media recovery
media recovery failed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of blockrecover command at 12/18/2012 16:45:11
ORA-00604: error occurred at recursive SQL level 1
ORA-01422: exact fetch returns more than requested number of rows
ORA-00279: change 5975281035000 generated at 12/08/2012 06:00:58 needed for thread 1
ORA-00289: suggestion : /prod/archlogs/1_465484_683651989.dbf
ORA-00280: change 5975281035000 for thread 1 is in sequence #465484
ORA-00278: log file '/prod/archlogs/1_465484_683651989.dbf' no longer needed for this re covery
we did not have block media recovery needed archivelog
Regards
Vignesh C -
Cannot drop old undo tablespace. Cause: active rollback segment
dear all.
db: oracle 10.2.0.1
os: rhel as version 5 64 bits.
This is a testing database. And my database is online and open. But i can free the external usb disk that contains my ols undotbs.
I want to drop old undo tablespace but this is not possible.
1.- In order to open my database i had my datafile( '/mnt/hdext/back_plelds/undotbs02.dbf') offline drop, and then i can to open my database.
2.- When i try to delete my old undo tablespace im getting this error:
SQL> drop tablespace undotbs1 including contents and datafiles;
drop tablespace undotbs1 including contents and datafiles
ERROR at line 1:
ORA-01548: active rollback segment '_SYSSMU1$' found, terminate dropping
tablespace
3.- My default undo_tablespace is another that i was created before step 1.
SQL> sho parameter undo_ta
NAME TYPE VALUE
undo_tablespace string UNDOTMP
SQL>
Well i search in metalink ORA-01548 code error and in 18947.1 doc whows me that the solution is:
Action: Shut down instances that use the active rollback segments in the
tablespace and then drop the tablespace.
4.- I try to shutdown but im getting:
SQL> shutdown immediate;
ORA-00376: file 10 cannot be read at this time
ORA-01110: data file 10: '/mnt/hdext/back_plelds/undotbs02.dbf'
SQL>
This /mnt/hdext is an external USB disk and i have all permissions. I exported tables without any problem and i can read all files.
i search un metalink again ora codes (ORA-00376 ORA-01110) and the doc id: 427801.1 shows in the solution:
Drop the old undo tablespace instead of making it offline.
but when i try to drop the tablespace it shows the error describe in the step 2.
Facts:
- my tablespace UNDOTBS1 is ONLINE. I put in offline and this is not the solution.
- This is the status of my rollback segments:
SQL> select segment_name, status from dba_rollback_segs where
2 tablespace_name='UNDOTBS1';
SEGMENT_NAME STATUS
_SYSSMU1$ NEEDS RECOVERY
_SYSSMU2$ NEEDS RECOVERY
_SYSSMU3$ NEEDS RECOVERY
_SYSSMU4$ NEEDS RECOVERY
_SYSSMU5$ NEEDS RECOVERY
_SYSSMU6$ NEEDS RECOVERY
_SYSSMU7$ NEEDS RECOVERY
_SYSSMU8$ NEEDS RECOVERY
_SYSSMU9$ NEEDS RECOVERY
_SYSSMU10$ NEEDS RECOVERY
_SYSSMU11$ OFFLINE
SEGMENT_NAME STATUS
_SYSSMU12$ OFFLINE
12 rows selected.
SQL>
- I have the note (Unable to drop und tablespace In this article describe the problem but this is not the same. The difference is that i cannot drop the rollback segment that describe in step 2.
SQL> drop rollback segment "_SYSSMU1$";
drop rollback segment "_SYSSMU1$"
ERROR at line 1:
ORA-30025: DROP segment '_SYSSMU1$' (in undo tablespace) not allowed
in metalink the doc id: 173696.1 shows the solution:
Action: Check the undo segment name and reissue statement if necessary.
i cannot drop the rollback_segment
What can i do ???
thanks a lot.in step 4 did you try with shutdown abort?
If its still does not work then create another new table space with new file and then swtich to that tablespace http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/undo.htm#sthref1504Khurram -
Cannot drop old undo tablespace.
Hello friends ,
i Cannot drop old undo tablespace. While dropping the old undo tablespace we get an error
ERROR at line 1:
ORA-01548: active rollback segment '_SYSSMU77$' found, terminate dropping
tablespace
Please help
ThanksHere's a blog post that may help you:
http://davidalejomarcos.wordpress.com/2010/11/09/ora-01548-active-rollback-segment-syssmu1xxxx-found-terminate-dropping-tablespace-while-deleting-undotbs/ -
How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated. -
Rep-1401: formula name : Fatal Pl/SQL error occured
Hi,
I am using report builder 6.0 and recently came across a error while running the report. Rep-1401:<formula name> : Fatal Pl/SQL error occured.
I created a formula column in the report. In that i have three local variable.
f_val number := 0;
s_val number := 0;
t_val number := 0;
t_val := f_val/s_val ; --> this gives the above fatal error.
t_val := (f_val + 1)/s_val; --> this gives the above fatal error
t_val := f_val/(s_val + 1); ---> no error
if i change the value of s_val
s_val := 1;
t_val := f_val/(s_val - 1) ; ----> this gives the above fatal error.
Can anyone help me to solve this problem or is it report builder bug.
Please help me, as i desperately need help.
ThanksThanks for ur reply.
I used nvl too, but the same error occurred.
For the information in my question I by mistake typed
t_val := (f_val + 1)/s_val; --> this gives the above fatal error.
but when the value of f_val = zero and s_val is zero why it gives fatal error when i divide, i used nvl on both the variable while dividing but still got the same error.
but if s_val is greater than zero then no error occurs.
please help me, I feel it is a bug. -
When I upgraded to ios 5, it asked me a for a new game center name. How do I use my old game center name, since it makes me start some games over without it?
Carefully follow steps 1-9 outlined by wjosten in this post: https://discussions.apple.com/message/13356770#13356770. This will not, however, avoid wiping any non-purchased media from your phone (ripped CDs, etc.) as this is only synced one way: from your computer to your phone. You will have to either rebuild your iTunes library with this content and sync again to restore it to your phone, or purchase 3rd party software to copy it from your phone to iTunes prior to syncing (such as Touch Copy).
-
How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....
Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well. -
i changed my apple id user name for icloud on my iphone, but when i want to sign in to icloud on my ipod it gives me only the old id user name, and of course its deleted and when i put the old password for my old id it doesnt accept it, so please help me in how my ipod get the info that i changed my apple id, and also when i try to sign off icloud it again gives me back the old apple id and ask me for a password to turn off my find my iphone, im really confused and i tried everything.....
My ipad was changed normally and easily but my ipod is stuck and of course is not listed on my devices on icloud....please help me!!!!!!!!!!!!!Hello oshalaby,
To get it to your new Apple ID, you would need to change it back to your old on so you can turn off Find My Device and turn it off. Once that is done, change it back to what you are currently using now. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/TS5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Regards,
-Norm G. -
How do I purge old time capsule names?
I have been unable to get an old 1TB time capsule to run as a back up on time machine with a Mac mini (OSX10.9.5)—I have spent almost two days trying to set it up to work as it should but in the end I have had to come here.
On the time capsule, I have updated firmware to 7.6.4, reset to factory by pressing the button inset on the back (several times) and erased all data using Airport utility 6.3.2.
First off, I want to purge any and all old time-capsule names (and lost passwords) that pop up every time I activate time machine>select disk or airport utility>base station. This still happens even after I have reset and erased all data on the time capsule.Not sure how I could uninstall 7.6.4,
Downgrade firmware by holding down the option key when you click the version number in the summary screen.
(I also did this with TC connected directly to the Mini via ethernet to the WAN port),
Never connect to the WAN port.. always LAN.. you are setting this wrongly so getting into trouble.. All devices behind plug into LAN or connect to wireless.. only the router connects to WAN.
when I opened TMachine (TM) up popped the "old disc name" on "the new TC name."
Reset TM.. you are mixing things up.
Time Machine needs to be totally fixed from the computer.. the setting on the TC is totally irrelevant.
See A4 here. http://pondini.org/TM/Troubleshooting.html
Now I cannot seem to get the Mini and TC to see the ethernet connection at all. FYI the ethernet connection on SysPrefs>network shows "self-assigned IP"
You are plugged into the wrong port.
It is LAN not WAN. Hence no IP address.
It looks like a clusterF to me...any suggestions as to how to get TM/TC to back up via ethernet before disconnecting the ethernet connection and going totally radio?
Full manual setup of the TC in total isolation from the network... MUST WORK.
https://discussions.apple.com/thread/5800974?tstart=0
Or should I just use TM with an external HD connected to the mini via USB, which at present looks like a far more sensible option?
Local backup is faster, more reliable and in Mavericks 1000% better.. Mavericks has major network issues.
And TM is lousy as well.
I use Carbon Copy Cloner as a backup software.. as well as TM.. it is more reliable and bootable clone backups can be tested in a few min so you know they work. None of this is possible with TM. -
Error Occurred While Converting the file "Track Name". An Unknown Error Occurred (-50)
I'm trying to add the CD Ben Howard - I Forgot Where We Were to iTunes but I keep getting
Error Occurred While Converting the file "Track Name". An Unknown Error Occurred (-50).
Could someone please help?Importing problems have been rife in the recent iTunes release.
Not sure how to solve your problem, but until a solution comes along feel free to rip in another program, such as Windows Media Player, and add the resulting MP3s to your iTunes library. -
Sun would like your help with the "System Name Already In Use" error
A couple of users have reported getting an erroneous "System Name Already in Use" error when re-registering a system after a fresh Solaris re-install. We'd like your help in tracking down this problem.
The scenario is this:
* Install Solaris 10 and register with updatemanager,
* Wipe out the installation and re-install Solaris.
* re-register with updatemanager.
The system erroneously reports that the system name is already in use. It is supposed to detect a duplicate registration of the same system.
We have not been able to reproduce this error in our lab.
If this has happened to you, would you let us know at [email protected]?
Here are the things that we would like to ask of you:
* If you run "updatemanager -debug" if will create a log file /tmp/basicreg<timestamp>.log.
* Details on the exact hardware you have (make/model/configuration).
* Details on the steps you took to get to the bad state. REALLY detailed!
Thanks!
Based on what we know now, we believe you can work around the issue by either:
* Changing the host name and re-registering.
* Creating a different user account and registering the host to that account.
Some previously-posted workarounds are known NOT to work:
* Wait 24 hours and try again.
* Do some "ccr" incantations and try again.Hi,
Can you drop me an email as i am a sun employee and i will be able to check if the swup frontline team have received any support cases on this issue and then we can work with you directly to resolve the issue.
Scott Wallace -
I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application How can i download it?
In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application" -
The name of the security certificate is invalid or does not match the name of the site error?
I am looking for some help folks. We are in a Outlook 2007/Exchange2010/Windows2008R2 environment.
When users open Outlook off the network, and occasionally on the network, they get the error
The name of the security certificate is invalid or does not match the name of the site error
The CAS hostname is HRECAS.XXX.ORG. The URL that is listed on the SSL certificate (issued by VeriSign) is WEB.XXX.ORG. WEB.XXX.ORG is what users use to get to OWA and such.
When I use testexchangeconnectivity.com, under certificate name validation I see an error that reads:
Host name autodiscover.xxx.org doesn't match any name found on the server certificate CN=web.xxx.org.
Does this mean somehow we have to add autodiscover.xxx.org on the certificate?
I tried to add AutoDiscoverExternalUri using
http://support.microsoft.com/?kbid=940726 &
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/2d0c0f5f-e4ec-4f33-a37d-b94fd7a2319f on the CAS server.
Set-ClientAccessServer -identity HRECAS -AutodiscoverServiceExternalUri
https://autodiscover.xxx.org/Autodiscover/Autodiscover.xml
I get an error that says
"a positional parameter cannot be found that accepts argument '-AutoDiscoverExternalUri'.
Can someone point to me what I am doing wrong with the command and whether I should be concerning myself with adding that line? By the way the
InternalUrl information is already configured on the system. Also should I edit the certificate to add autodiscover.xxx.org?
Thank in advance for your support.
TD
TDHi Tapera,
Thanks for the question.
SRV record is a good idea. You can set the SRV to
https://web.abc.com/autodiscover/autodiscover.xml but you must make sure the
url can be resolved from External clients.
In addition, there is still a issue. It is hard coded that Outlook will find the autodiscover by the orders below:
1. Access autodiscover via SCP in AD.
https://web.abc.com/autodiscover/autodiscover.xml
2. If SCP access fails, it will try:
https://abc.com/autodiscover/autodiscover.xml
3. Then
https://autodiscover.abc.com/autodiscover/autodiscover.xml
4. Local XML file
5. SRV record
As you can see, Outlook will try SRV record at last. Therefore, it will still try to access
https://autodiscover.abc.com/autodiscover/autodiscover.xml each time you run Outlook. Then the certificate warning will still persists.
I have a workaround solution. You can do a local policy to disable the autodiscover to access the
https://autodiscover.abc.ocom/autodiscover/autodiscover.xml by:
1.
On the Outlook client machine, open regedit and add the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\Autodiscover
"ExcludeHttpsAutodiscoverDomain"
"ExcludeHttpsRootDomain"
2.
Then set the value to “1” on the above two keys.
Thanks,
Simon
Maybe you are looking for
-
Can i still have 2 iphones with one itunes account with the new ios7
My husband and I have always had 1 itunes account with 2 phones. he recently did the upgrade to ios7 and I have not. will my phone be affected if I upgrade?
-
I have the option to view file extensions in my folders. However, I cannot see the file extensions. i am having some problems with some things and I want to make sure I am downloading the *exact* same file from my server (where I can see the file ext
-
Hey there, What is your recommended way of styling text? And how would you store user-defined styles and apply them to different parts of text (like "header1", "highlighted", etc.)? Would you have to go through and use a text editor, or have you fo
-
Delay downloading Exchange server email
I use an iMac with an ethernet link to cable internet service. Using Mail, I have a strange delay of 1-2 minutes before email downloads from an Exchange server. Interestingly, my MacBook, also using Mail, downloads the same Exchange server email almo
-
iPod "kicks me out" of apps and goes back to the home screen. This esp happens when using words with friends. Is there a solution?